Loading large dataset in chunks using stored procedure

Hi,
I want to create a procedure in ODI that writes a data into a file by importing data in small chunks from a table stored in a database. How can I perform this task. Any help would be much appreciated.

944098 wrote:
I want to create a procedure in ODI that writes a data into a file by importing data in small chunks from a table stored in a database. How can I perform this task. Any help would be much appreciated.What is your exact requirement ?
Because you wrote
create a procedure in ODI that writes a data into a file and again
importing data in small chunks from a table stored in a database. Which step you wants to do via ODI procedure ?
You can do both operation from PL/SQL procedure ,
you need to use utl_file package for writing data into a file i.e 1st part
2nd pert is a simple stright forward procedure .
Thanks,
Sutirtha

Similar Messages

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Unable to run SSIS Package using Stored Procedure

Hi Guys,
        I have create one simple SSIS Package(Move the first table record to second table).It will execute fine in locally.
But, If i'm going call/execute .dtsx file using stored procedure. I'm getting Error. so please let me know the valuable solution.
My Package Path : D:\Temp\SSIS_TESTING\TESTSSIS\TESTSSIS\Package.dtsx
Stored Procedure
================
CREATE PROCEDURE SPEXECUTESSISPACKAGE
@FILEPATH VARCHAR(8000)
,@STATUS VARCHAR(500) = NULL OUTPUT
AS
BEGIN
DECLARE @SQLQUERY VARCHAR(8000)
DECLARE @STATUSCODE INT
SET @SQLQUERY = 'DTEXEC /FILE "'+ @FILEPATH +'"'
SELECT @SQLQUERY AS 'SSIS FULL PATH'
EXEC @STATUSCODE = master..xp_cmdshell @SQLQUERY
SELECT @STATUSCODE AS 'STATUSCODE'
IF @STATUSCODE <> 0
BEGIN
SET @STATUS = 'PACAKGE EXECUTE FAILED'
PRINT @STATUS
END
ELSE
BEGIN
SET @STATUS = 'PACAKGE EXECUTE SUCCESS'
PRINT @STATUS
END
END
GO
RUN
============================================================================
EXEC SPEXECUTESSISPACKAGE 'D:\Temp\SSIS_TESTING\TESTSSIS\TESTSSIS\Package.dtsx', NULL
Error
=============================================================================
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.4035.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
NULL
Started: 5:06:26 AM
Error: 2014-11-14 05:06:26.07
   Code: 0xC0011007
   Source: {1244CD18-F96A-4DAD-8FC2-35F794015CA1}
   Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2014-11-14 05:06:26.07
   Code: 0xC0011002
   Source: {1244CD18-F96A-4DAD-8FC2-35F794015CA1}
   Description: Failed to open package file "D:\Temp\SSIS_TESTING\TESTSSIS\TESTSSIS\Package.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot
be opened or loaded correctly
into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
End Error
Could not load package "D:\Temp\SSIS_TESTING\TESTSSIS\TESTSSIS\Package.dtsx" because of error 0xC0011002.
Description: Failed to open package file "D:\Temp\SSIS_TESTING\TESTSSIS\TESTSSIS\Package.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened
or loaded correctly int
o the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
Source: {1244CD18-F96A-4DAD-8FC2-35F794015CA1}
Started: 5:06:26 AM
Finished: 5:06:26 AM
Elapsed: 0.047 seconds
NULL
I'm getting Execte SSIS Package Status : 4
===================================
4

Two things to check
1. The account executing the package has access to the path. If package is stored in different server you need to pass the UNC path (ie like \\machinename\...)
2. Make sure the version of SSIS service is the same in both the servers ie where package is created/stored and where its getting executed. A lower version SSIS service will not be able to load and execute higher version package and it will throw you similar
error messages as you posted above.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

SSIS 2012 ETL is failing only at one server (No BIDS) but running successfully from BIDS on different sever . In this ETL, I have used Stored Procedure in OLEDB Source.

Hi Guys,
SSIS 2012 ETL is failing only at one server (No BIDS) but running successfully from BIDS on different sever . In this ETL, I have used Stored Procedure in OLEDB Source.
Note: I have couple of ETLs developed in 2005 using same logic and upgraded to 2012, working perfectly.
I am getting Error Message:
SSIS
Error Code
DTS_E_OLEDBERROR.
An OLE DB
error has occurred.
Error code: 0x80004005.
An
OLE DB
record is available.
Source: "Microsoft OLE DB Provider for SQL Server"
Hresult: 0x80004005
Description: "Error converting data type varchar to datetime.".
Unable
to retrieve
column information
from the data
source. Make
sure your target
table in
the database is
available.
"OLE DB Source"
failed validation
and returned
validation status
"VS_ISBROKEN".
I tried below word around and found It is working perfectly.
I loaded data into a table (dbo.TEMP) using Stored procedure and then I used this dbo.TEMP table in OLEDB source and then found no issue.
MY SP Details: (This SP I am calling in OLEDB source of ETL) and when I run it from one server IT is working fine and when I run from ETL dedicated Server getting error: Guys Help me out.
USE
[TEST_DB]
GO
SET
ANSI_NULLS ON
GO
SET
QUOTED_IDENTIFIER ON
GO
ALTER
PROCEDURE [DBO].[SP_TEST]
--EXEC [DBO].[SP_TEST] '2014-09-30','2014-10-01'
@FROMDATETIME
DATETIME,
@TODATETIME
DATETIME
AS
SET
NOCOUNT ON
BEGIN
DECLARE
@FROMDATEKEY INT,
@TODATEKEY INT,
SET
@FROMDATEKEY=
CONVERT(VARCHAR(10),@FROMDATETIME,112)
SET
@TODATEKEY=
CONVERT(VARCHAR(10),@TODATETIME,112)
IF 1 = 1
BEGIN
SELECT
CAST(NULL
AS DATETIME)
AS TXN_DATE
, CAST(NULL
AS DATETIME
) AS PROCESS_DATE
, CAST(NULL
AS money)
AS S1_AMT
, CAST(NULL
AS money)
AS S2_AMOUNT
, CAST(NULL
AS money)
AS S2_INVALID_AMOUNT
, CAST(NULL
AS money)
AS INVALID_MOVED_IN_VALID_S2_AMOUNT
, CAST(NULL
AS VARCHAR(20))
AS SYSTEM_ID
, CAST(NULL
AS money)
AS S3_AMT
END
SELECT
TXN_DATE
,PROCESS_DATE
,S1_AMT
,S2_AMOUNT
,S2_INVALID_AMOUNT
,INVALID_MOVED_IN_VALID_S2_AMOUNT
,SYSTEM_ID
S3_AMT
FROM
DBO.TABLE_1
WHERE TNX_DATE_KEY
BETWEEN @FROMDATEKEY
and @TODATEKEY
UNION
ALL
SELECT
TXN_DATE
,PROCESS_DATE
,S1_AMT
,S2_AMOUNT
,S2_INVALID_AMOUNT
,INVALID_MOVED_IN_VALID_S2_AMOUNT
,SYSTEM_ID
S3_AMT
FROM
DBO.TABLE_2
WHERE TNX_DATE_KEY
BETWEEN @FROMDATEKEY
and @TODATEKEY
UNION
ALL
SELECT
TXN_DATE
,PROCESS_DATE
,S1_AMT
,S2_AMOUNT
,S2_INVALID_AMOUNT
,INVALID_MOVED_IN_VALID_S2_AMOUNT
,SYSTEM_ID
S3_AMT
FROM
DBO.TABLE_3
WHERE TNX_DATE_KEY
BETWEEN @FROMDATEKEY
and @TODATEKEY
END
Data Source Mode: SQL Command for Variable
"EXEC [DBO].[SP_TEST] '"+ (DT_WSTR, 24) @[User::V_EXTRACT_FROM_DT] +"','"+ (DT_WSTR, 24) @[User::V_EXTRACT_TO_DT] +"'"
Where variable @[User::V_EXTRACT_FROM_DT] and @[User::V_EXTRACT_TO_DT] is defined as DATETIME
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi,
Yes you are right. At one sever where I was getting error, DateTime was in USA format and Where It was running successfully was in AUS format.
I changed from USA to AUS and I did another changes:
Data Source Mode: SQL
Command
EXEC [DBO].[SP_TEST]
@FROMDATETIME = ?,
@TODATETIME = ?
and It is working fine.
Thanks Shiven:) If Answer is Helpful, Please Vote

How to run ssis 2012 package deployed on SSISDB using stored procedures from [SSISDB].[catalog] by regular AD accounts ?

Hello, I need to run ssis package by stored proc(pass parameters inside and get result using stored procedures [SSISDB].[catalog].[create_execution]) etc. Do not suggest me to use SQL Agent here as this is not the case. or by pass this using configuration
for SSIS, I need to know what permission I'm missing if those stored proc run by AD account, with rights described from BOL and I'm having "The current security
context cannot be reverted. Please switch to the original database where 'Execute As' was called and try it again." If I schedule stored proc to run by Agent and specify parameters - will work, from remote PC - does not. I have sysdamin
rights on the server where SSIS and stored proc which is call it exists. I was digging around and have ugly solution to make it working, I want to use elegant solution using those stored proc from [SSISDB].[catalog] ...
Any help especially from Microsoft guys here...?
Vladimir

>>>>If I schedule stored proc to run by Agent and specify parameters - will work,
from remote PC - does not.
Vova
If you schedule the job it will be running under SQL Server Agent account security.... What error
do you get when you run the SP from remote PC?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

IN Operator Parameter using stored procedure

Hi Guys,
I'm running a reporting services report using stored procedure and I'm facing a dilemma with the IN Operator in the stored procedure.
Can someone please help me out debugging the statement below? (run it on AdventureWorks Database)
Can I have the @Title Parameter based on another select statement something like this
Set @Title = SELECT Title FROM TableTitle
DECLARE @Title varchar(1000)
set @Title = 'Design Engineer', 'Tool Designer', 'Marketing Assistant'
SELECT FirstName, LastName, e.Title
FROM HumanResources.Employee AS e
JOIN Person.Contact AS c
ON e.ContactID = c.ContactID
WHERE e.Title IN (@Title)
Appreciate all the help on this.
Thank you
John

Hi John,
For your problem, we can use dynamical statement to solve the issue.
Here are 2 options to be clarified:
         1. A multi-value parameter will return an array value.
         2. It is not able to pass an array in a stored procedure.
To solve the issue, we can use the following steps:
1.              Cconvert the array into string that delimited by “,” using the function “Join” in SQL Server Reporting Services.
2.              Pass the string in the stored procedure.
3.              Combine the parameter and the statement into one simply string.
4.              Execute the simply string.
Here are the detailed steps for your reference:
1.       In Report Designer, create a new dataset as “SELECT Title FROM TableTitle”.
2.       Create a new multi-value parameter, set the available value from the dataset above.
3.       Set the query of the main dataset as :
="spSelect_Title "&Join(Parameters!para.Value, ",")
4.       Change the stored procedure as:
ALTER PROCEDURE [dbo].[spSelect_Title]
         -- Add the parameters for the stored procedure here
         --@Query NVarchar(Max),
         @Title NVarchar(MAX)
AS
BEGIN
         -- SET NOCOUNT ON added to prevent extra result sets from
         -- interfering with SELECT statements.
         SET NOCOUNT ON;
         DECLARE @Query Varchar(Max)
         SET @Query = 'SELECT FirstName, LastName, e.Title
         FROM HumanResources.Employee AS e
         JOIN Person.Contact AS c
         ON e.ContactID = c.ContactID
         WHERE e.Title IN (' + @Title+ ')'
--       PRINT ' QUERY = '+ ISNULL(@Query,'NULL')
         Execute sp_executesql @Query
END
If you have any more questions, please feel free to ask.
Thanks,
Jin
Jin Chen - MSFT

How to build a report in webi XIr2 using stored procedure

Post Author: vijay123
CA Forum: WebIntelligence Reporting
hi,
Is anybody can help me out how to creat a report using stored procedure in webiXir2
thanks
vijay

Post Author: amr_foci
CA Forum: WebIntelligence Reporting
this has been posted twice.. i think

Error while refreshing bqy file on workspace using stored procedure

Hi,
I am using stored procedure which returns ref-cursor. The report is running fine locally but on Workspace, while refresh, it gives the following error.
An Interactive Reporting Service error has occurred.-SQL API: [SQLNumResultCols], SQL RETURN: [-1], SQL STATE: [HY010], SQL NATIVE ERROR: [0], SQL MESSAGE: [[Microsoft][ODBC Driver Manager] Function sequence error]
(0)
I have ODBC/ODBC connection set up at BI+ configurator.
Thanks,
Manish

We also met this issue. Some guy told me this is a Hyperion limitation, is it true? I really need this function in Hyperion:(

How to use stored procedure in crystal report for eclipse

Hi;
I am working on crystal report for eclipse 2.0 and trying to use stored procedure in report .It is created from Oracle but it is not showing any dependencies
CREATE OR REPLACE procedure ACT_DB.getCostTransferDetails
        p_In_Contract_ID         varchar2 DEFAULT '*',
        p_In_Status_ID           varchar2 DEFAULT '*',
        p_In_COST_TRAN_DATE      varchar2 DEFAULT '*',
        p_In_DEPT_ID             varchar2 DEFAULT '*',
        p_In_PROJECT_ID          varchar2 DEFAULT '*',
        p_In_EMPLOYEE_ID         varchar2 DEFAULT '*',
        p_Out_CostTransfer_Cusor OUT COST_TRANSFER_PACKAGE.COST_TRANSFER_TYPE
AS
BEGIN
        OPEN p_Out_CostTransfer_Cusor FOR
        SELECT
            header.cost_tran_id,
            header.cost_tran_date,
            header.total_credit_amount,
            header.total_debit_amount,
            header.transfer_status,
            header.updated_by,
            header.added_by,
            header.trf_over_ninety_days,
            header.business_unit_id,
            header.equip_approval,
            header.batch_desc,
            details.opr_unit_id,
            status.status_id,
            details.fund_code_id,
            details.prgm_code_id,
            details.class_id,
            details.activity_id,
            details.product_id,
            details.status_id,
            details.transaction_amount,
            details.jrnl_date,
            details.adjust_prcnt,
            details.adjust_amnt,
            details.details_equip_approval,
            details.detail_desc,
            details.account_id,
            details.project_id,
            details.dept_id,
            details.contract_id,
            details.reason_code_id,
            details.jrnl_id,
            employee.f_name,
            employee.l_name,
            employee.employee_id,
            project.project_id,
            project.project_status,
            --header.transfer_status,
            contracts.contract_desc
          FROM header, details, status, employee, department, project, contracts
         WHERE     (header.cost_tran_id = details.cost_tran_id)
                AND (header.cost_tran_date = details.cost_tran_date)
                AND (header.transfer_status = status.status_id)
                AND (department.dept_id = details.dept_id)
                AND (department.dept_id = employee.dept_id)
                AND (project.project_id = details.project_id)
                AND (contracts.contract_id = details.contract_id)
                AND (details.Contract_ID = p_In_Contract_ID OR p_In_Contract_ID ='*' )
                AND (header.TRANSFER_STATUS = p_In_Status_ID OR p_In_Status_ID ='*' )
                AND (TO_CHAR(details.COST_TRAN_DATE, 'MM/DD/YYYY') = p_In_COST_TRAN_DATE OR p_In_COST_TRAN_DATE ='*' )
                AND (details.DEPT_ID = p_In_DEPT_ID OR p_In_DEPT_ID ='*' )
                AND (details.PROJECT_ID = p_In_PROJECT_ID OR p_In_PROJECT_ID ='*' )
                AND (header.ADDED_BY = p_In_EMPLOYEE_ID OR '*'=p_In_EMPLOYEE_ID )
Can any another way to make procedure
Thanx
Regards ,
Amol

Hi Amol,
Are you able to execute your stored procedure from oracle?.
- If "Yes" then use the Crystal Report XIR2 Designer to create the report.
- Import this report in the Crystal Report For Eclipse Workbench.
- The latest version for Crystal Report For Eclipse is SP1.
Please let me know the results.
Thanks,
Neeraj

How to Insert date in 'DD/MM/YYYY' format in oracle using stored procedure?

Hi
How to Insert date in 'DD/MM/YYYY' format in oracle using stored procedure?
This is my Input data.
11/25/2007.
By using below query, it is inserted into database.
sql>Insert into tblname values(to_date('11/25/2007','MM/DD/YYYY'));
But using stored procedure, the same query is not running.
It shows error like
ORA-01843: not a valid month ORA-06512: at line 1
Procedure:
create or replace procedure Date_Test(datejoin in DATE) is
begin
insert into datetest values(to_date(datejoin,'MM/DD/YYYY'));
end Date_Test;
I had used 'nls_date_language = american' also.
Prcodeure is created but not worked in jsp. The same error is thrown.
Pls provide a solution

This might help you....
SQL> Create Table DateTest(col1 Date);
Table created.
Elapsed: 00:00:00.00
SQL> create or replace procedure Date_Test(datejoin in DATE) is
2 begin
3 insert into datetest values(to_date(datejoin,'MM/DD/YYYY'));
4 end ;
5 /
Procedure created.
Elapsed: 00:00:00.00
SQL> exec Date_Test('11/25/2007');
BEGIN Date_Test('11/25/2007'); END;
ERROR at line 1:
ORA-01843: not a valid month
ORA-06512: at line 1
Elapsed: 00:00:00.00
SQL> exec Date_Test(To_Date('11/25/2007','mm/dd/yyyy'));
BEGIN Date_Test(To_Date('11/25/2007','mm/dd/yyyy')); END;
ERROR at line 1:
ORA-01843: not a valid month
ORA-06512: at "CTBATCH.DATE_TEST", line 3
ORA-06512: at line 1
Elapsed: 00:00:00.00
SQL> create or replace procedure Date_Test(datejoin in DATE) is
2 begin
3 insert into datetest values(datejoin);
4 end ;
5 /
Procedure created.
Elapsed: 00:00:00.00
SQL> exec Date_Test(To_Date('11/25/2007','mm/dd/yyyy'));
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
SQL> Select * from DateTest;
COL1
25-NOV-07
Elapsed: 00:00:00.00
SQL> create or replace procedure Date_Test(datejoin in VarChar2) is
2 begin
3 insert into datetest values(to_date(datejoin,'mm/dd/yyyy'));
4 end ;
5 /
Procedure created.
Elapsed: 00:00:00.00
SQL> exec Date_Test('11/25/2007');
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
SQL> select * from DateTest;
COL1
25-NOV-07
25-NOV-07
Elapsed: 00:00:00.00
SQL>

How to use Stored Procedure Call in Sender JDBC adapter

Hi All,
Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter?
Xier

Hi Xler
refer these links
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Also, you can check Sriram's blog for executing Stored Procedures,
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
This blog might be helpfull on stored procedures for JDBC
JDBC Stored Procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Please go through these threads and see if it helps...
Re: How to execute Stored Procedure?
Re: Problem with JDBC stored procedure
Thnaks !!

How to use Stored Procedures in form 6i Blocks

Dear Friends,
I would like to know how to use Stored Procedures while creating blocks in Data Block Wizard in forms 6i application.
Please send me sample code of stored procedure.
Regards,
Khader.

The Data Block Wizard is not for creating stored procedures. It will allow you to use a stored procedure in your form. See the help documentation for how to use the wizard.
Here's an example of a simple procedure. If you search the database forum or the web, you will find many examples.
CREATE OR REPLACE PROCEDURE procedure_name (value OUT NUMBER ) AS
BEGIN
SELECT COUNT(*) INTO value
FROM your_table;
END;
Message was edited by:
Mark Roberts

HOW TO USE STORED PROCEDURES IN JASPERREPORTS(URJENT)

Hi,
i'm using jasperreports in struts based project. How to use stored procedures in jasperreports. pls send the solution urjent
Thanks in advance
ramesh

Hi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag

How to use stored procedures in DIAdem and Can the stored procedures be used to return values?

Can anyone please tell me how to use stored procedures in diadem and to return values from it. Its really important, can you please answer it at the earliest.
Thanks In advance
spiya

Hi Spria,
I'm very sorry for the mix-up, I thought Allen was going to answer you back with the particulars that we found out. Check out the attached Word document and the below tidbits:
The built-in DIAdem ODBC functions {SQL_...()} can only call stored functions, which return a scaler result {found then in SQL_Result(1,1)}. The syntax for this with an ORACLE db is
"select function(parameters) from package"
...where package defaults to "dual" if you don't use your own package.
There might be exceptions to that though, and the syntax will be different for other databases. Note that stored ORACLE procedures can NOT be called from the ODBC functions, instead you must use either ADO function calls in the DIA
dem VBScript or the OO4O COM wrapper that ORACLE provides (this is described in further detail in the below Word document).
Hope this helps,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Calling_ORACLE_Stored_Procedures_from_DIAdem.doc ‏28 KB

How to use Stored Procedures in JDBC sender side and receiver side

Hello,
Can anyone explain how to use stored procedures in configuring the scenario using JDBC adapter at bothe sides sender nad receiver..
Thanks,
Soorya

Hi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag

Loading large dataset in chunks using stored procedure

Similar Messages

Maybe you are looking for