Loading master data compounded infoobject

Hello experts
I want to load master data into an InfoObject from a flat file, thus i want to define this infoobject as an infoprovider
In order to do that i use the "Insert characteristic as InfoProvider" option from the InfoArea but i get a message :
InfoObject PA_PAPRCT is not a basis characteristic; not used as data target
This InfoObject has a superior InfoObject defined as superior InfoObject in the compounding tab, is that the problem ?
Thanks for your help and happy new year
Thibault

Dear Thibault
Yes, PA_PAPRCT is not the basic characteristic.
Instead of this, use the superior object for this object.
Than you can load the master data for all these objects.
Hope now you will get the idea
Regards
Saravanan.ar

Similar Messages

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

To load master data into infoobject 0mat_unit

Hi Experts,
Cud you pls give me any idea to load master data into infoject 0mat_unit from R/3.
We need more than 10,000 master data into 0mat_unit. How can I collect data from R/3 for different attributes of infoobject 0mat_unit?
I will assign full points for suitable solution.
Thanks in advance!
Sapna

Hi Sapna,
See
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm">DataSource in the SAP Source System</a>
Udo

While loading master data to infoobject Load failed due to Duplicate record

Hi Experts,
While loading master data to the infoobject load failed .
The error it is showing is 24 Duplicate record found. 23 recordings used in table.
Pls help me to solve this issue
Thanks in Advance.
Regards,
Gopal.

In infopackage settings u will find a checkbox for 'delete duplicate records'.
I think it appears beside the radio button for 'To PSA',and also tick checkbox for 'subsequent update to data targets'.
This will remove the duplicate records(if any) from the PSA before they are processed further by transfer and update rules.
Use this and reload master data.
cheers,
Vishvesh

BPC75NW: Error Loading Master data for BPC Dimensions from BW InfoObject

Hello Gurus,
I'm trying to load master data for BPC Dimensions from BW Infoobjects.
The ID thats used in BW is 32 char long. When I run the load, the ID is truncated after 20 chars and the records are reported as duplicates.
Due to this the load is failing.
I cannot use any other ID as the texts will not be loaded in that case.
Is there any work around to handle this?
I cannot load the transaction data either.
I looked at some posts and blogs in sdn, but nothing really helped.
Cube - 0RPM_c05 (Financial Planning cube in SAP PPM)
Version: BPC 7.5 NW SP5
Thanks,
Vasu

Thanks Everyone.
" you can write a transformation file and give a new name to those IDs who have values more than 20 characters."
Poonam - Could you explain more?
I tried using a additional Dimension property to hold the 32 char ID. But I cannot access this in the transformation.
Is there a way to refer the dimension property in the Transformation file or in the UJD_ROUTINE BADI implementation?
Thanks,
Vasu

Loading master data for characteristic having compounded characteristic

Hey guyzz
I am getting an error when i am trying to load master data for a custom characterisrtic ZQUALGRP (Quality Group) which has a compounded characteristic 0PLANT.
The data in the excel file used for loading looks like:
Plant | Quality Group | Description
1601 | BlendA | Willow Lake Underground | Blend A
1610 | BlendA | Riola Complex - Riola Portal | Blend A
1611 | BlendA Riola Complex - VG Portal | Blend A
I have defined transformations for Master Data Text Load and all these three fields are mapped in the transformation. There are no attributes for this characteristic.
I get the following error in the Data Transfer Process Monitor
ZQUALGRP: Data Record 1 ('1601BlendA E'): Version '1601BlendA' is not valid.
ZQUALGRP: Data Record 2 ('1610BlendA E'): Version '1610BlendA' is not valid.
ZQUALGRP: Data Record 3 ('1611BlendA E'): Version '1611BlendA' is not valid.
The transformation for some apparent reason is concatenating the plant and quality grp together.
Can you please comment why i am getting this error.
Please note I DELETED AND RECREATED DATA SOURCE AND TRANSFORMATION, STILL I GET THE SAME ERROR.
Thanks,
Ameya Kulkarni

A change..
The data in the file looks like this
Plant | QGrp | Description
1601 | BlendA | Willow Lake Underground Blend A
1610 | BlendA | Riola Complex - Riola Portal Blend A
1611 | BlendA | Riola Complex - VG Portal Blend A

Loading Master Data to an InfoObject

All,
When loading a info provider like an ODS or Cube, there is a 'manage' option where you can see the requests that have loaded and that have failed. Where is the equivalent feature for loads to an InfoObject? Is there one?
Thanks in advance...

hi nat,
go to administration work bench (rsa1) go to info objects in context menu u can find maintain master data
click on that u can see the master data of that infoobject.
As master data is important we can't delete with requests
as in ods or cube.usually developer will wont have authorization. we can edit the masterdata by reloading it
again.
Once u loaded master data using info package, in the monitor tab (rsmo ) u can see the status of the dataload
green indicates successfully loaded or red indicates data not loaded properly
hopes this clears ur doubt
let me know
<b>Assigning pts is the way of saying thansk in sdn</b>
cheers
ravi
regards
ravi

Error 0 update while loading master data

Hi,
Iam facing a problem while loading master data.Data has comes to PSA but it getting failed to load into infoobject it is showing the error " error in the 0 update".
Ihave tried for manual update, even though it is showing same problem .masterdata 0material is copy back from production to Quality.presently iam uploading data in quality.can anybody give your valuable suggestions.
Thanks & Regards,
Mahi.

I've a compounding characteristic in this characteristic.
And the master data loading was fine yesterday but today it doesn't work.
When I check with rsrv this characteristic, a dump with message:
Error in ABAP application program.
The current ABAP program "SAPLRRSI" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "GP47HH4A9VROVK98YR0TT9S7TQ5 ", the following syntax error occurred
in the Include "GP47HH4A9VROVK98YR0TT9S7TQ5 " in line 25:
"Field "/BIC/MZCATWRT" is unknown. It is neither in one of the specifie"
"d tables nor defined by a "DATA" statement. "DATA" statement."
So I think something is wrong in this Char.
But what can I do for that?
Thanks a lot for all idea.
Juan

Need help in loading master data.

Hi everyone,
I am just a beginner in BI 7.0 . I know Bw 3.5 . I need help in loading master data(flat file) in a step by step manner.
Before posting this forum i searched and checked out other related forums too, as i am a beginner i am unable to follow them. Lots of the forums gave the help.sap.com link which i used and got a little help but not fully, so please don't send that link. I need a step by step guideline from somebody, which says everything from the beginning till monitoring say like
e.g.. 1) create a InfoObject by right clicking on InfoObject catalog.
something like that.
please help me get a clear and detail step by step procedure to load a master data (Flat File should be good) which may help me get a start will other things without much help.
Please help me learn.
Thanks.
Ranjani.

HI,
Thanks for your reply. This is what i did.
1) Created a Info Area.
2) Created Info object catalog & activated
3) created info object with nothing except some 4 attributes.
4) Created Application compound in Infosource tab.
5) Right clicked on Application compound and chose create Infosource in which chose a option with 3.x and chose the flexible update and gave the info object name.
6) In info provider tab , in the Info Area right clicked and chose the Insert char as data target option.
Now, i am stuck. I have no idea what to do next.
I know i have to create a transformation - There are two tabs in Transformation box, what should i do there.
Please help me from point 6 to cont., to load the data.
Thanks.

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

Loading Master Data from a Flat File

Hi Guru, I have flat files of different SAP tables (Transactional data tables and Master Data ), I want to upload this flat files to a DSO, my question is in the case of Master Data Files example SAP table USR03 ( User Address Data) in a Flat file format which is better to create a Master data text and attributes Datasource or create it as a transactional data Datasource to upload it to a DSO.

Hi
Master data datasource should be used to load master data like customer details. customer data is the master data which does not change frequently. customer infoobject may have some attributes like customer name, customer contact number, customer address, etc. we have to maintain these attributes and text data.
Transaction data is something which keeps changing very frequently like price of the material, sales, etc. for loading such data we go for transaction datasources.
As mentioned above too,the changes in the address are very rare, therefore youshould not use transactional datasource.
Regards, Rahul
Edited by: Rahul Pant on Feb 7, 2011 12:24 PM

Error while loading Master Data - BPC 10.0 NW

Hello gurus,
I am trying to load master data from a BW InfoObject to a dimension in BPC, but am getting the error as shown below:
The transformation and conversion files are configured as shown below:
I would greatly appreciate if you can help me troubleshoot the issue with the java script command. Thanks in advance for your help.
Best regards,
Vijay

Hello Vijay,
Which Patch are you using for EPM add in.
It seems that js:%external%.replace("#","_") does not work with some patches
so in that case you have to use js:%external%.toString().replace("#","_") in your conversion file.
Deepesh

Error while loading master data.

I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.

SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

Error 194 while loading Master Data.

Hi,
I've a custom Info Object which has 0MATERIAL as an attribute. While trying to load master data to this custom info object using DBConnect , I'm getting the error:
RSDMD 194
0MATERIAL: Data record 1('0001003') : Version '1009841' is not valid.
I think it's a problem with conversion exit. But I'm not able to solve this problem. It would be of great help if you could guide me on how to overcome this.
Thanks in advance.
Regards
Hari

Hari,
I'm thinking for DB Connected datasources we have Propose Tab Page and Fileds Tab Page. In the Propose tab Page you can see data type and Format(internal or External or check). select external, put data type of your Material Infoobject Data type in the Propose Tab Page.
all the best.
Note: I'm thinking DB Connected Datasources got Propose Tab page. Please correct me if i'm wrong.
Regards,
Nagesh Ganisetti.
*Assign Points if it helps

Error while loading master data from R/3

Hi Friends,
            I'm just trying to load master data for the infoobject of type "0BUS_AREA", but i have got data into PSA, but not got into char, i have got an error stating that
Record 1 :No source system ID exists for source system (logical system) RD1CLNT100
In tran structure there are two objects not being populated 0LOGSYS & OSOURCESYSTEM, which might cause the problem.
Pls waiting for your replays
Thanx in advance
Balaji K.

Hi Aswin,
           Thanx for your replay, in that one column is there, "source system id" but it is empty, how to generate that two digit source system id and also there are three kind of tabs like
"Release IDs that are in use" "Suggest Source System IDs" & "Maintain Logical Systems"
         How to use and which one to use, and how to follow step by step to run loads once again by populating "OLOGSYS" & "OSOURCESYSTEM" ?
Pls clarify this problem
Regards.,
Balaji K.

Loading master data compounded infoobject

Similar Messages

Maybe you are looking for