Loading Master Data from SAP R/3

Hi Friends.,
           I'm going to load master data from SAP R/3 FI Modules to BW, but what do these objects mean by ?
0LOGSYS - Source System
0SOURSYSTEM - Source system ID
                 I'mn't understanding clearly, and also transfer rules aren't mapped properly.
   can anybody clarify these things ?
Regards.,
Balaji K. Reddy

Hi Balaji,
You need to use these objects when your BW is feed by different source system and you want to map differences beetween Master and Transactional Data fed by the different systems (different R/3 - Flat File - Legacy Systems - ...).
If you do not have this situation you can avoid to use these objects (probably you find these objects in Tab compound of your MD).
Ciao.
Riccardo.

Similar Messages

How to load master data from SAP R/3 system like Customer master...........

How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............

Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay.

BPC Error while loading master data from SAP BW

Hello Guru,
I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
Q. Do i need to activate any BADI's for this or not ?
I appreciate your help in advance. I trie

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

Issue while loading master data from BI7 to BPC

Dear Experts,
I'm trying to load master data from BI7 to BPC NW using scenario 2 mentioned in the below document.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
My requirement is need to load 0GL_ACCOUNT attribute and text data from BI7 system to BPC.
1.As mentioned in the How to...doc I had created a dimension called GL_ACCOUNT using BPC Admin client .
2.Able to see GL_ACCOUNT in RSA1, when I try to create a Transformation(step 17 , page-40) to load Attribute data I could not find source of transformation object as 0GL_ACCOUNT(which exist in BI7) . I could only able to see only dimensions available in BPC system when I click F4 in Name.
What could be the reason to not getting BI infoobject as source in BPC?
Thanks in advance...
regards,
Raju

Dear Gurus,
My issue got resolved. So far I'm trying to pull data from R/3>BW>BPC. In the existing land scape BW and BPC are 2 different boxes. That is the reason I couldn't able to see BW objects into BPC (since 2 are different boxes). To resolve the issue I have created a new infoobect (RSD1) in BPC and data loading is from R/3>BPC infoobject(which is created through RSD1)>BPC Dimension.
Thanks and regards,
Raju

Load master data from BI 7.0 to BPC NW 7.0

From BPC 7.0 NW, SAP has standard package to load transaction data from BI cube to BPC cube, However, it dose not have the standard package to load master data from BI master data to BPC master data(dimension),
Is this mean that we have to load the master data from BI to BPC through flat file? or we can create some customer package(process chain) to load it?

Hi JW,
You can automate the master data load from BW if that is what you are trying to accomplish. Have you seen this guide: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827 ?
Additionally you can also develop a custom process type and use it in a custom process chain alongwith a data manager package to load master data if you don't want to use any flat files at all.
Regards
Pravin

Need help with loading master data from R/3 to BI 7.0.

Hi,
First i thank everybody who took efforts to answer for my posting, i really am learning this new version with your helps. I really appreciate it.
Could any one help me with a step by step process to load master data from R/3 to BI 7.0. Please don't send help.sap.com.
will assign points .
With Thanks,
Ranjani R

Hi,
Thanks for the answers. I tried loading it yesterday, i had lot of confusions.
What should i do to load a master data from a R/3 to BI7.0.
1. Created a Info object named (EKKO_mas) with some attributes (ernam, ekorg, lifnr).
2. Go to info provider and right clicked on info area and selected insert char as data target. (Please correct if i am wrong).
3. Login to R/3, go to sbiw generic data source created one with a view/table as EKKO and map the application compound and select the needed fields by checking the checkbox. (please correct if wrong).
4. Go to source system tab and replicate data source. ( Please correct if i am wrong)
Then what should i do.
guessing steps:
4. Create a Data source, in BI 7.0 . In that as i am not using flat file, should i select "application server" instead of "local workstation" . In field tab i specified all the fields given in Info object. ( Will there be anything else i should do or change in this tab)
5. Load data in PSA. ( will the data from R/3 i selected loaded in PSA without any problem)
6. Create transformation , save and activate.
7. Create DTP save and activate , click execute.
By doing the above given step will i be able to load the master data from R/3 to BI 7.0 data target (IO) . Please help me if something is wrong with my steps.
Thanks.
RR.
*will assign points.

Issue while loading master data from BI to BPC

Dear All,
I am loading master data from BI to BPC using the process chain /CPMB/IMPORT_IOBJ_MASTER. I ran the package and package status was success. But few member ID's which are available in BI are not getting loaded in BPC. Nearly I have 1300 ID's in BI. Out of 1300,only 1270 ID's are loaded in BPC.
I haven't restrict any ID's using conversion file as well.
What could be the reason? How can I overcome this and load all member's ID in BPC?
Thanks & Regards,
Ramesh.

Ramesh,
Whats the write mode you have chosen for the CPMB/IMPORT_IOBJ_MASTER chain ?
Check if you have the Update mode ..
Hope this helps...

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

How to load master data in sap bpc 7.0

Hi ,
how to load master data in sap bpc 7.0?plz give me the steps also?
Thank u

Hello Devi,
There are three ways you can load Master Data in BPC
1) Copy and paste.
Download master data in flat file .Copy the master data and paste in members of dimension after that process the dimension.
2) Using SISS Pakage - load Flat File into BPC-Cube
3) Using SQL Command.
Thanks.
With regards,
Anand Kumar

To Load Master Data From Two Source System

Hi All,
I have a small question :
- Can we load master data from two different source system say from flat file and R3 or any two different or similar source system?
If answer is "Yes", then how?? If possible step by step.
Appreciate your valuable points.
Thanks,
Niraj Sharma

Hi,
Still i have problem.R3 Transformation and DTP is getting activated but when i am executing DTP for flat file,
I am getting below ERROR.
Object DTP DTP_d55.......could not found in version A.
I have checked the Master data locally for source sys in compounding Tab of the key field.
Please help..
Thanks,
Niraj

UPLOAD MASTER DATA FROM SAP GL TO ACCOUNT DIMENSION

hi
how can i upload master data (chart of account) from BW 0GL account info object to BPC Account Dimension ?
how can i upload the hierarchy, there is no hierarchy in ECC for the chart of account

SAP offers free content + documentation in the form of rapid-deployment solutions (RDS).
In the Extended Financial Planning Rapid-deployment solution, there is a module called G/L Financial Planning which includes the full load of SAP-based account dimension from SAP ERP to BPC via BW. This content introduces BPC-based Package Links as a best practice way to load master data (including the account hierarchy and transaction data). You can download the content and documentation from the highlighted page above or HERE.
SAP also offers free training on the EPM rapid-deployment solutions in the EPM RDS Academy 2015 on SAP JAM. If the link to the Academy does not work, please register HERE and SAP will invite you.

Loading Master Data from a Flat File

Hi Guru, I have flat files of different SAP tables (Transactional data tables and Master Data ), I want to upload this flat files to a DSO, my question is in the case of Master Data Files example SAP table USR03 ( User Address Data) in a Flat file format which is better to create a Master data text and attributes Datasource or create it as a transactional data Datasource to upload it to a DSO.

Hi
Master data datasource should be used to load master data like customer details. customer data is the master data which does not change frequently. customer infoobject may have some attributes like customer name, customer contact number, customer address, etc. we have to maintain these attributes and text data.
Transaction data is something which keeps changing very frequently like price of the material, sales, etc. for loading such data we go for transaction datasources.
As mentioned above too,the changes in the address are very rare, therefore youshould not use transactional datasource.
Regards, Rahul
Edited by: Rahul Pant on Feb 7, 2011 12:24 PM

While Loading Master data from BW Info Object

Hi,
What is the difference between the two options
"set filters by Attributes AND Hierarchies" and
"set filters by Attributes OR Hierarchies"
when we load master data attributes/texts from BW Info Object.
can someone please explain in detail with example.
Thanks,
Rishi

Hi Rishi,
While looking at your question -
What is the difference between the two options
"set filters by Attributes AND Hierarchies" and
"set filters by Attributes OR Hierarchies"
when we load master data attributes/texts from BW Info Object.
can someone please explain in detail with example.
This is not what you are explaining in second post.
Kindly close old threads properly if your queries are resolved , so that it will helps other.
Shrikant

Loading master data from SD to BW

Hi Friends
does anyone have steps for loading master data of SD to BW. I have loaded transaction data, need to load the customer and material master data.
let me explain in more detail. i have extracted the data from a table in R/3 and it doesnt have the material and customer description, so the cube also wont have the same. the mat description is a table in R/3 called MAKT. how do i go about getting that material description into the cube. i hope this is clear enough and if you have any queries post so i can reply.
I am working on LO extraction. As one of the contributors suggested, I need to do an enhancement, is it in the form of an ABAP routine or can it be done by adding a field to the cube. Pls suggest.
Regards
RP
Message was edited by:
rp

hi,
first thing which shouold be kept in mind is that master data should be loaded first than the transactioenal data should be loaded so as to reduvce time.
the steps ara
1.replicate the data source to bw by going to source system and chosing replicata datasoources.
2.actvate the data sources.
3.now create transformation between data source and target and then create infopackage and schedule.
pls assign points if helfuyl.

Tools to Auto load bulk data from SAP BW into Essbase?

Does any one know what is the most efficient way to retrieve a large amount of data from SAP BW into Essbase on a regular basis? We currenly export data from BW into several Excel files, which has the limitation of 64k row in a batch, we then load the excel files into essbase usng rules files. And it's a manual process. Do you know if there is a better tool/approach that we can use to do the data retrieve and load into essbase in one batch without need of human interference? Thanks for your good ideas!

you can use HAL to do the extraction and loading data from SAP. did you try this?

Loading Master Data from SAP R/3

Similar Messages

Maybe you are looking for