Loading Master Data to an InfoObject

All,
When loading a info provider like an ODS or Cube, there is a 'manage' option where you can see the requests that have loaded and that have failed. Where is the equivalent feature for loads to an InfoObject? Is there one?
Thanks in advance...

hi nat,
go to administration work bench (rsa1) go to info objects in context menu u can find maintain master data
click on that u can see the master data of that infoobject.
As master data is important we can't delete with requests
as in ods or cube.usually developer will wont have authorization. we can edit the masterdata by reloading it
again.
Once u loaded master data using info package, in the monitor tab (rsmo ) u can see the status of the dataload
green indicates successfully loaded or red indicates data not loaded properly
hopes this clears ur doubt
let me know
<b>Assigning pts is the way of saying thansk in sdn</b>
cheers
ravi
regards
ravi

Similar Messages

Loading master data from another infoObject (generate export datasource)

Hi All,
We are using a 0MATERIAL that is loaded every day, and we would like to use another infoObject that contains data updated every end of last month (and ont daily).
For instance, on 15th april, we would like use data from 31th march and not 15th april.
We saw that we could use "Generate export datasourse" from 0MATERIAL to the nex infoObject.
1) Is there the best solution?
2) If yes, could you explain us how to do this (generate export datasource), because we didn't do this?
3) Do we do this from InfoObject (0MATERIAL) or Infosource?
Thank you.
Edited by: Radjech Radjech on May 11, 2009 10:44 AM

Hi,
Check : [Generating the Master Data Export DataSource|http://help.sap.com/saphelp_nw04/helpdata/EN/11/1a5038d2c1ba03e10000009b38f8cf/frameset.htm] to generate export datasouce.
If MATERIAL is time dependent data then, Use To Date field as selection(31st March) to load data into new infoobject. Restict at infopackage level.
Srini

While loading master data to infoobject Load failed due to Duplicate record

Hi Experts,
While loading master data to the infoobject load failed .
The error it is showing is 24 Duplicate record found. 23 recordings used in table.
Pls help me to solve this issue
Thanks in Advance.
Regards,
Gopal.

In infopackage settings u will find a checkbox for 'delete duplicate records'.
I think it appears beside the radio button for 'To PSA',and also tick checkbox for 'subsequent update to data targets'.
This will remove the duplicate records(if any) from the PSA before they are processed further by transfer and update rules.
Use this and reload master data.
cheers,
Vishvesh

Loading master data compounded infoobject

Hello experts
I want to load master data into an InfoObject from a flat file, thus i want to define this infoobject as an infoprovider
In order to do that i use the "Insert characteristic as InfoProvider" option from the InfoArea but i get a message :
InfoObject PA_PAPRCT is not a basis characteristic; not used as data target
This InfoObject has a superior InfoObject defined as superior InfoObject in the compounding tab, is that the problem ?
Thanks for your help and happy new year
Thibault

Dear Thibault
Yes, PA_PAPRCT is not the basic characteristic.
Instead of this, use the superior object for this object.
Than you can load the master data for all these objects.
Hope now you will get the idea
Regards
Saravanan.ar

Error while loading master data.

I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.

SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

Error while loading master data from R/3

Hi Friends,
            I'm just trying to load master data for the infoobject of type "0BUS_AREA", but i have got data into PSA, but not got into char, i have got an error stating that
Record 1 :No source system ID exists for source system (logical system) RD1CLNT100
In tran structure there are two objects not being populated 0LOGSYS & OSOURCESYSTEM, which might cause the problem.
Pls waiting for your replays
Thanx in advance
Balaji K.

Hi Aswin,
           Thanx for your replay, in that one column is there, "source system id" but it is empty, how to generate that two digit source system id and also there are three kind of tabs like
"Release IDs that are in use" "Suggest Source System IDs" & "Maintain Logical Systems"
         How to use and which one to use, and how to follow step by step to run loads once again by populating "OLOGSYS" & "OSOURCESYSTEM" ?
Pls clarify this problem
Regards.,
Balaji K.

DM Package Abort while loading master data - BPC 10 NW

Hello gurus,
I am trying to load master data from BW InfoObject to BPC. The package is running successfully if I just load the master data (without selecting the hierarchy node). However, when I select the hierarchy node, the package aborts without giving any details in the package log.
Please note that the hierarchy for the BW InfoObject is time-dependent.
Therefore, I was wondering if there are other requirements that should be in place (such as new SAP notes, etc.) or any other procedures that should be followed while loading the time-dependent master data from BW to BPC.
Thanks in advance for all your valuable guidance.
Best regards,
Vijay

Hi Vijay,
Please have a look at your ST22 t-code if it gives this error:"exception 'CX_SY_RANGE_OUTOF_BOUNDS' " apply the following note:
1957783 - An exception 'CX_SY_RANGE_OUT_OF_BOUNDS' occurs while
loading infoObject hierarchy on BW 740
Regards,
Noura

Look up to load master data

Hi,
I am trying to load master data for my infoobject 0CUSTOMER.This has a field 0DBTYPE whose data is stored in another master data ODS which contains DUNS data.The key 0DBNUM of this ODS is an attribute of 0CUSTOMER.I want to implement the routine in the transfer rules as it is a direct update.So can anyone send me a sample code on how to achieve this and help me out.
Regards,
Kal

hi Kal,
first create start routine in transfer routine
(change transfer rules and click icon blank page beside 'start routine') and put following code after
(assume your ods name is zods)...
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
put this after the global code ...
tables : /bic/azods00.
data : l_duns like /bic/a[odsname]00 occurs 0 with header line.
/bic/a[odsname]00 or /bio/a[odsname]00
a[odsname]00 is the ods active table name
if you use master data infoobject it's /bi?/p[infoobjectname]
select * from [odstablename]
into table l_duns.
then in infoobject 0DBTYPE create routine and put following code (assume the infoobject name is 0DBDUNS_NUM)
read table l_duns with key 0DBDUNS_NUM = tran_structure-DBDUNS_NUM.
without 0
if found
if sy-subrc = 0.
result = l_duns-DBTYPE.
endif.
or if you make you infoobject 0customer as infoproider (from rsa1->infoprovider, right click infoarea and 'insert characteristic as infoprovider'), then use flexible update to 0customer update rules assign to infosource with that ods, you may try use method 'master data attrib. of'.
hope this helps.

Loading Master Data - Select the 'right' attributes

Hello everybody,
hopefully some expert can answer my question.
I want to load Master Data for the InfoObject 0CRM_PROD.
When I look at the tree beneath the 0CRM_PROD attributes following DataSources are listed:
- 0CRM_PRODUCT_ATTR
- 0CRM_PROD_ATTR (obsolete)
- 0CRM_PR_MAT_ATTR
- 0CRM_PR_REST_IN_ATTR
- 0CRM_TR_CONTROL_ATTR
- 0PRODUCT_ATTR (obsolete)
- 0PRODUCT_GENERAL_ATTR
- 0PRODUCT_STATUS_ATTR
- 0PR_BASE_UNIT_ATTR
- 0PR_COMMERCIAL_ATTR
- 0PR_IL_PROREF_ATTR
- 0PR_PROD_VAR_ATTR
- 0PR_PURCHASE_CATEG_ATTR
- 0PR_SALES_CATEG_ATTR
Now my question is which attributes for 0CRM_PROD do I have to load?
Are any of them mandatory or basic attributes?
And how do the attributes 0CRM_PRODUCT_ATTR and 0PRODUCT_ATTR differ from each other?
Thanks in advance!
Chris

Hello,
The BW DataSources used in CRM 4.0 for the SAP product are replaced with new DataSources.
Please see the Note 673053 - SAP product: New DataSources in PI_BASIS 2004_1_640
Just for Reference
[Integration of SAP Products in SAP BW|http://help.sap.com/saphelp_nw04/helpdata/en/f8/580f40763f1e07e10000000a1550b0/content.htm]
Thanks
Chandran

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Not able to load text master data for customer infoobject

Hi Guys,
I am not able load master data text to the customer infoobject.
I have a infoobject-A which is loaded with 1000 records, out of which only 100 records are with text and remaining are without text.
I have run a repair full request(extraction from ECC) and
i can see data till PSA(the 100 records which are with text are no more available in ECC now).remaining 900 records are available with text till PSA but not updating to target infoobject.
I have 3.X flow and i have checked transfer rules update rules and tried everythign from side-but no use-still not not working.
Please post your suggestions.
Thanks in advance
Regards,
Siva

Hi Ramanjaneyulu,
Transferrules screen shot:-
update rules
Regards,
Siva

To load master data into infoobject 0mat_unit

Hi Experts,
Cud you pls give me any idea to load master data into infoject 0mat_unit from R/3.
We need more than 10,000 master data into 0mat_unit. How can I collect data from R/3 for different attributes of infoobject 0mat_unit?
I will assign full points for suitable solution.
Thanks in advance!
Sapna

Hi Sapna,
See
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm">DataSource in the SAP Source System</a>
Udo

Issues with loading master data and hierarchy from BI InfoObject

Hi,
I was successful with loading the master data from BI InfoObject. It copies the text node as well but it discards the space I have in the technical name when it copies it to BPC. For example if my Text Node technical ID is "NODE 1" it copies it as "NODE1" on BPC side because of which my hierarchy load fails as it is not able to find "NODE 1".
What is the reason it deletes the space from technical ID? and how can I resolve this issue?
Do we have a provision to write a ABAP exit where I can check?
(PS: If i manuallay enter space on my BPC dimension the hierarchy loads successfully)
Thanks in advance,
Diksha.

Hi,
You can check this in start routine which can be called from Transformation file using BADI.
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/28/b66863b41f47589b9943f80b63def6/content.htm
Hope this helps...
regards,
Raju

BPC75NW: Error Loading Master data for BPC Dimensions from BW InfoObject

Hello Gurus,
I'm trying to load master data for BPC Dimensions from BW Infoobjects.
The ID thats used in BW is 32 char long. When I run the load, the ID is truncated after 20 chars and the records are reported as duplicates.
Due to this the load is failing.
I cannot use any other ID as the texts will not be loaded in that case.
Is there any work around to handle this?
I cannot load the transaction data either.
I looked at some posts and blogs in sdn, but nothing really helped.
Cube - 0RPM_c05 (Financial Planning cube in SAP PPM)
Version: BPC 7.5 NW SP5
Thanks,
Vasu

Thanks Everyone.
" you can write a transformation file and give a new name to those IDs who have values more than 20 characters."
Poonam - Could you explain more?
I tried using a additional Dimension property to hold the 32 char ID. But I cannot access this in the transformation.
Is there a way to refer the dimension property in the Transformation file or in the UJD_ROUTINE BADI implementation?
Thanks,
Vasu

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

Loading Master Data to an InfoObject

Similar Messages

Maybe you are looking for