Loading Master data using DTP's

Hi,
        I have got a problem with loading master data,we use DTP's for loading it,but the requests were failing due to prior incorrect requests for that master data infoobject,inspite of the fact that Master data always overwrites and also the DTP's were full update enabled.
         To load successfully we need to go and delete the previous requests all the time.
I think there must be some way of solving this problem,help from you all will be really appreciated.
Regards,
G.Monica Roja Flora.

yeah you would need to delete the incorrect requests before you can load again. Though the master data is overwrite, with the incorrect request the status can never be A.

Similar Messages

  • TSV_TNEW_PAGE_ALLOC_FAILED error while loading the DATA using DTP

    Hi,
    While loading the data using DTP for 2  DSO's we are gettig the error
    TSV_TNEW_PAGE_ALLOC_FAILED
    can any one kindly help me out regarding the same.
    Thank You,
    Poornima.

    Hi Soundarya,
    Thanks a lot for the reply. But i found that its running fine in development, where as coming to quality its throwing an error. These happened for Two DSO's. In both the transformations i have identified that the Transformation names are different from Development and Quality..
    There are no routines written for them and no select statements have been used
    Can you please suggest me regarding the same.
    Edited by: Poornima Gayatri on Mar 22, 2010 7:00 AM

  • Load master data using input schedules

    Hi all,
    Does there exist a way to load and modify master data using input schedules?
    Regards,
    Nithya

    Hi Nithyapriya,
    Chiming in here to 2nd Joost's statement above.  As of BPC 5.1 version, it is not possible to update master data from an Input schedule.
    Whether that's possible in other products or with BPC 7.0 NW (currently in Ramp-up), is another story.  For now, the general answer is that it's not possible.
    This is a known area for improvement with BPC at this time, and we're sure to hear more about either integration with NetWeaver or some other methods of making things more dynamic, or with SSIS packages, etc.. in the future.
    Edited by: garrett tedeman on Sep 2, 2008 7:20 PM

  • Loading master data attributes

    Hi.
    When I am loading master data attributes, DTP process takes long time (approximately 30 minute) .
    Although records count is just 193.
    What may be a reason of this?
    Information about system:
    Software component   Release    Level
    SAP_ABA                      700          0023  
    SAP_BASIS                   700          0023  
    SAP_BW                        700          0025

    Hi...
    Check the Package size in the DTP......try to increase or decrease it.....if it makes any differerence......
    Secondly....in the DTP in the tab "Update" select the option " Valid records update, No reporting"....then the "Semantic Groups" in the tab " Extraction" will work.....it will improve the performance....
    Regards,
    Debjani........

  • Loading Master Data to an InfoObject

    All,
    When loading a info provider like an ODS or Cube, there is a 'manage' option where you can see the requests that have loaded and that have failed. Where is the equivalent feature for loads to an InfoObject?  Is there one?
    Thanks in advance...

    hi nat,
    go to administration work bench (rsa1) go to info objects in context menu u can find maintain master data
    click on that u can see the master data of that infoobject.
    As master data is important we can't delete with requests
    as in ods or cube.usually developer will wont have authorization. we can edit the masterdata by reloading it
    again.
    Once u loaded master data using info package, in the monitor tab (rsmo ) u can see the status of the dataload
    green indicates successfully loaded or red indicates data not loaded properly
    hopes this clears ur doubt
    let me know
    <b>Assigning pts is the way of saying thansk in sdn</b>
    cheers
    ravi
    regards
    ravi

  • Use of "with master data & with out master data" at DTP update level

    Hello experts,
    In DTP, I check "with out master data". When I try to send corresponding transactional data, It is showing SID related error. Can anybody suggest what is the use of "with master data & with out master data" at DTP level.
    Thanks in advance,
    Zakir.

    HI
    HI in DTP level If you set this indicator, the system terminates the update of the request if no values are available for a data record.
    Load the relevant master data before you load the transaction data.
    If you set this indicator, the system terminates activation if master data is missing and produces an error message.
    If you do not set this indicator, the system generates any missing SID values during activation.
    In DataStore maintenance, if you do not set the SIDs Generation upon Activation indicator, the No Update without Master Data indicator in the DTP has no effect.
    thx
    vijju

  • DTP error: Lock NOT set for: Loading master data attributes

    Hi,
    I have a custom datasource from ECC which loads into 0CUST_SALES.  I'm using DTP & transformation which has worked for loading data in the past for this infoobject.  The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".  I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7.   Thanks in advance!

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • Initial full load of Master data using process chain

    Hi All,
    Could you please help me regarding, initial master data load to characteristics with attributes and text. I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time. And one more doubt is, as per my knowledge we can't maintain more than one variant in an info package, is that right ? or we can ?
    Means Start Variant -> Info Package (0Customer_Text, 0Customer_Attr,0BILL_TYPE_TEXT, BILL_CAT_TEXT) -> DTP ( ", ", ", ") -> ACR.
    Your Help will be appreciated.
    Thanks & Regards
    Sunil

    Hi,
    "I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time."
    if there is no dependency between attributes then you add you can create process chains and trigger them at a time. No issues.
    we can't maintain more than one variant in an info package, is that right ? or we can ?
    With one info pack you can't load data to all 23 psa. because each data source have own psa. you need to sue 23 info packs.
    in general start variant--> info pack --> dtp (assuming as your bw 7.x)---> attribute change run.
    like that you need to create 23 chains 
    Or create one two big chains.
    one is for attribute and another for text.
    In attribute
    start varaint--> info pack(info bject 1)--DTP(infoobject 1))--> info pack(infoo bject 2)-->dtp(infoobject 2).
    Like that way you can create in series and parallel chains to load attributes data into info objects. at end you add change run for 6 info objects each. SAme you can do for text loads also.
    Thanks

  • How to load master data from 2 source system without using 0logsys as compo

    Hi Gurus,
    I am working on a project which has 2 source systems.
    Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
    So, please help me out providing logic.
    thanks in advance
    Peter.

    Hi Peter,
    Can you brief me how did you resolved your issue?
    Regards
    Utpal

  • DTP running long time to load master data due to lock on SID table

    Hi,
    we are facing a problem while DTP loading master data into targets(Info Objects).
    It is taking long time to load data due to below error.
    18.03.2014 01:03:23 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:13:39 EXTRACTION OF DATAPACKAGE 000009                                                                  RSAR          051          S
    18.03.2014 01:13:40 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:24:50 EXTRACTION OF DATAPACKAGE 000010                                                                  RSAR          051          S
    18.03.2014 01:24:51 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:38:34 EXTRACTION OF DATAPACKAGE 000011                                                                  RSAR          051          S
    18.03.2014 01:38:41 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:52:10 EXTRACTION OF DATAPACKAGE 000012                                                                  RSAR          051          S
    18.03.2014 01:52:10 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:06:51 EXTRACTION OF DATAPACKAGE 000013                                                                  RSAR          051          S
    18.03.2014 02:06:53 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:22:32 EXTRACTION OF DATAPACKAGE 000014                                                                  RSAR          051          S
    18.03.2014 02:22:33 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:38:36 EXTRACTION OF DATAPACKAGE 000015                                                                  RSAR          051          S
    18.03.2014 02:38:37 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:55:25 EXTRACTION OF DATAPACKAGE 000016                                                                  RSAR          051          S
    18.03.2014 02:55:25 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 03:13:56 TRUNCATE TABLE "/BI0/0600000066"                                                                  DBMAN         099          I
    18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00                                                             DBMAN         099          I
    18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 03:13:56  LOCK TABLE "/BI0/0600000066" IN EXCLUSIVE MODE                                                   DBMAN         099          I
    18.03.2014 03:13:56 NOWAI                                                                                             DBMAN         099          I
    18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00                                                             DBMAN         099          I
    18.03.2014 03:13:58 EXTRACTION OF DATAPACKAGE 000017                                                                  RSAR          051          S
    18.03.2014 03:13:59 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:34:24 EXTRACTION OF DATAPACKAGE 000018                                                                  RSAR          051          S
    18.03.2014 03:34:25 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:56:03 EXTRACTION OF DATAPACKAGE 000019                                                                  RSAR          051          S
    18.03.2014 03:56:03 All records forwarded                                                                             RSM2          730          S
    18.03.2014 04:19:55 EXTRACTION OF DATAPACKAGE 000020                                                                  RSAR          051          S
    18.03.2014 04:19:56 All records forwarded                                                                             RSM2          730          S
    18.03.2014 04:44:07 SQL: 18.03.2014 04:44:07 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 04:44:07 TRUNCATE TABLE "/BI0/0600000068"                                                                  DBMAN         099          I
    18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:02                                                             DBMAN         099          I
    18.03.2014 04:44:09 SQL: 18.03.2014 04:44:09 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 04:44:09  LOCK TABLE "/BI0/0600000068" IN EXCLUSIVE MODE                                                   DBMAN         099          I
    18.03.2014 04:44:09 NOWAI                                                                                             DBMAN         099          I
    18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:00                                                             DBMAN         099          I
    18.03.2014 04:44:12 EXTRACTION OF DATAPACKAGE 000021                                                                  RSAR          051          S
    18.03.2014 04:44:13 All records forwarded                                                                             RSM2          730          S
    For this long running data load we didnt find any short dumps and no locks available on SM12 also.
    Please help on this.
    Thanks,
    Sankar.

    Can we know what kind of data source is this. attribute or text data source.
    what is data volume? its less or more?
    Actually we load direct access data thru dtp(No psa) into info objects for text data sources where have less data only.
    While running your dtp is any attribute change run for the same info object ot any transactional loads are happening?
    Is this happens on particular day or weekend or anydays?
    Thanks

  • DTP to load master data, gives the message 'No more data available'.

    hi,
    when i execute the DTP to load master data from DSO, it executes and gives the message 'No more data available'. The request is green but no data is transferred from the DSO to master data.
    I want the DSO data to get into master data how do i do it?

    Hi Hardik,
    Since the request is green, there is no error in extraction. But, as they've rightly pointed out, the Update mode of the DTP must be Delta and there must not be any new Master data that you are looking for.
    Compare the data and check if the Delta DTP should bring anything at all i.e. new records. If there are no new records, then the Delta DTP will not bring any more data. Else, change mode to Full and check again.
    Reg,
    Dhaval

  • Error while loading master data.

    I am facing error while loading master data in a infoobject.
    The error comes when I run DTP fo rloading data from PSA to infoobject.
    The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
    Please help me in understanding this Version errror and suggest a solution for this.

    SAP metodology integration MDM & BW you can look at:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
    You can turn matching strategy in MDM Data manager for delete dublicate of records
    and then use MDM Syndicator for export data to file and then load that file to BW
    If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
    in BW every record has unique key.
    also you can use MDM ABAP or Java API for delete dublicate of records
    Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

  • BI 7.0 - Duplicate Record Error while loading master data

    I am working on BI 7.0 and I am trying to load master data to an info object.
    I created an Infopackage and loaded into PSA.
    I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
    I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
    My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
    I would appreciate your help to resolve this issue.
    Regards,
    Ram.

    Hi,
    Refer:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • Where to set lock while loading master data attributes

    Hello Experts,
    I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
    When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
    Here what exactly  LOCK means?
    Thanks in advance.
    Zakir Khan.

    Hi,
    The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
    In your case you and schedule the DTP one after another.
    Thanks

  • HOW to load Master data

    Can I not load Master data, that is Text directly to infoObject.
    Now I load Text to a custom infoObject from a flat file.
    Infopack puts data in PSA, Then dont I need a DTP to put data into infoObject.
    Now when I try to create DTP it will say it will need a transformation and it will create it. Now when U execute DTP it is failing because infoObject is not an inforprovider.
    Once InfoObject is in an infoarea that it is good to go.
    Now I dont want the infoObject to be infoprovider. How can I load directly to master data tables of the infoObjects.

    Hi GMAN
    In BI7.0, You can use "Old" data source, that can upload into master data directly.
    If you want to use "Old" one, change back your data source to 3.x data source.
    For more details, see below links.
    Datasource or Datasource 3.x
    Hanna

Maybe you are looking for