Loading master data with date-fields

Hello,
we are loading with the extractor 0crm_mktelm5_attr data to the data target 0crm_mktelm (infoobject).
The fields "from" and "to" are initial in psa. But the Update in the master data abort with the failure:
"Invalid "to" date '00000000 ' " and "Invalid "to" date '00000000 ' ".
The data-fields in psa are initial, and in other BW-Systems, we have not problems with the extractor 0crm_mktelm5_attr and initial date-fields.
Have any body an idea??
Thanks
Murat

Hello Shashank,
thanks,
the Infosource.mapping was false.
regards
Murat

Similar Messages

Uploading of cost center data with additional fields

Hi Gurus,
I have uploaded the cost center data. now my client has given same data with additional fields data(ORT01, ORT02, TXJCD). first time I have uploaded with LSMW IDOC methos COSMAS1. but in the same idoc the extra field not available. So i have tried recording method for KS02 to upload the data. but the data is not changed. in the sence the additional fields data not loading. while uploading i getting the probelm at TXJCD. it is getting a popup window. i was not able to handle that. Is there any other Basic IDOC to upload the data with all the fields in cost center. BAPI or Direct input program? Thanks in advance

hi,
you can avoid the popup screen by using OK code.
~linganna.

Performance question when compare date with date or char with char

Hello from Germany (Frankfurt) !
I am working on Oracle 9.2.0.8.0
and have to solve following problem:
Comparison of a date and char fields.
Now two ways to do it.
Either I compare char with char and convert date to char,
or I compare date with date and convert char to date.
Now the performace question. Which operation takes more effort for the database?
So why not to try and to see the results?
First create table:
CREATE TABLE TEST (
char_date VARCHAR2(8),
real_date DATE
NOLOGGING;
Then insert 1.000.000 rows
BEGIN
for x in 1..1000000
loop
insert into test (char_date, real_date) VALUES('19990101', TO_DATE('2006.01.01', 'YYYY.MM.DD'));
end loop;
COMMIT;
END;
Collect statistics
EXEC dbms_stats.gather_table_stats('TESTER', 'TEST');
Now run some selects for date to char conversion:
Elapsed: 00:00:00.00
SQL> select * from test t where TO_DATE(char_date, 'YYYYMMDD') > real_date;
no rows selected
Elapsed: 00:00:03.02
SQL> select * from test t where TO_DATE(char_date, 'YYYYMMDD') > real_date;
no rows selected
And some selects for char to date conversion:
Elapsed: 00:00:03.02
SQL> select * from test t where char_date > TO_CHAR(real_date, 'YYYYMMDD');
no rows selected
Elapsed: 00:00:02.05
SQL> select * from test t where char_date > TO_CHAR(real_date, 'YYYYMMDD');
no rows selected
Elapsed: 00:00:02.05
SQL>
As you see when I compare char with char and convert date to char it seems to be faster (almost 1 second)
Is the test correct?
I still not sure, what gets better performance...
Any idea?
Thanks!

Depends on whether you want the right results or not.
Why don't you run the following two queries and see if the difference in results tells you anything?:
with t as (select to_date('01/02/2007', 'dd/mm/yyyy') date_col from dual
           union all
           select to_date('02/02/2007', 'dd/mm/yyyy') from dual
           union all
           select to_date('03/02/2007', 'dd/mm/yyyy') from dual
           union all
           select to_date('03/03/2006', 'dd/mm/yyyy') from dual)
select *
from   t
where date_col < to_date('04/03/2006', 'dd/mm/yyyy');
with t as (select to_date('01/02/2007', 'dd/mm/yyyy') date_col from dual
           union all
           select to_date('02/02/2007', 'dd/mm/yyyy') from dual
           union all
           select to_date('03/02/2007', 'dd/mm/yyyy') from dual
           union all
           select to_date('03/03/2006', 'dd/mm/yyyy') from dual)
select *
from   t
where to_char(date_col) < '04/03/2006';

Load System Matrix with Data

Hi,
I like to fill system Matrix with data; please find the code below.
Thank you very much for your good work and support.
Thank you,
Rune
CODE
#region SalesOrderItemLine_GetDataFromDataSource
public void SalesOrderItemLine_GetDataFromDataSource( SAPbouiCOM.Form oForm, bool Matrix77_AddRefresh )
     try
          if ( Matrix77_AddRefresh )
oForm.DataSources.DataTables.Add("SYS_77");
          oForm.DataSources.DataTables.Item("SYS_77").ExecuteQuery("SELECT [Code],[Name],[U_Weight],[U_PoNo],[U_CoopName],[U_Consignee],[U_PalGroup],[U_Container],[U_ItemCode],[U_CheckBoxSelect] FROM [dbo].[@MyTable] WHERE [U_MatrixAorB] = 'A' AND [U_WRKsalesOrderYN] = 'N'");
          ( ( SAPbouiCOM.Matrix ) ( oForm.Items.Item("77").Specific ) ).Columns.Item("1").DataBind.Bind("SYS_77", "U_ItemCode");
          ( ( SAPbouiCOM.Matrix ) ( oForm.Items.Item("77").Specific ) ).Clear();
          ( ( SAPbouiCOM.Matrix ) ( oForm.Items.Item("77").Specific ) ).LoadFromDataSource();
          ( ( SAPbouiCOM.Matrix ) ( oForm.Items.Item("77").Specific ) ).AutoResizeColumns();
     catch ( Exception Error )
          oApplication.MessageBox("Add-On Error-3232: = " + Error.Message, 1, "Ok", "", ""); // My Error Code
#endregion

Hi David!
This is a Product Development Collaboration suggestion!
I like to load data into system matixes...that could be really nice!
(No my problem is still out there...
Thank you,
Rune

Loading data with dates using SQL*Loader

Dear everyone
I am currently trying to load some data containing dates using SQL*Loader.
For termination of fields I have been using ^ because I have some book titles which contain " and ' as part of their title. I found that the TO_DATE function did not seem to work using ^ instead of ". Would I be correct? I think the Oracle manual says that " must be used.
After some Web research I eventually amended my control file to as follows:
load data
infile 'h:\insert_statements\22_insert_into_SCAN_FILE_INFO.txt'
REPLACE
into table SCAN_FILE_INFO
fields terminated by "," optionally enclosed by '^'
TRAILING NULLCOLS
(scan_id, scan_filename
file_format_id
orig_scanning_resolution_dpi
scanner_id, scanner_operator_id
scanning_date "TO_DATE (:scanning_date, 'YYYY-MM-DD')"
original_map_publication_id
reprint_publication_id)
A simple line of data is as follow:
280001, ^1910 - London^, 270001, 400, 250001, 260001, "TO_DATE('2007-06-06', 'YYYY-MM-DD')", 200019,
The final column being null.
However when I attempt that I get the following error message:
Record 1: Rejected - Error on table SCAN_FILE_INFO, column SCANNING_DATE.
ORA-01841: (full) year must be between -4713 and +9999, and not be 0
If I change the scanning_date part to:
scanning_date "EXPRESSION TO_DATE (:scanning_date, 'YYYY-MM-DD')",
or
scanning_date "CONSTANT TO_DATE (:scanning_date, 'YYYY-MM-DD')",
I get the error message:
Record 1: Rejected - Error on table SCAN_FILE_INFO, column SCANNING_DATE.
ORA-00917: missing comma
As soon as I do the following:
scanning_date "EXPRESSION, TO_DATE (:scanning_date, 'YYYY-MM-DD')",
or
scanning_date "CONSTANT, TO_DATE (:scanning_date, 'YYYY-MM-DD')",
I get too many values error message:
Record 1: Rejected - Error on table SCAN_FILE_INFO.
ORA-00913: too many values
I also tested out scanning_date DATE "YYYY-MM-DD", but that just gave the same ORA-01841 error message as above.
I must be doing something very simple which is wrong but I cannot figure it out.
Kind regards
Tim

And why do you have scanning date as "TO_DATE('2007-06-06', 'YYYY-MM-DD')" in your infile? All you need is 2007-06-06. If you can not change infile generation code, use:
load data
infile 'h:\insert_statements\22_insert_into_SCAN_FILE_INFO.txt'
REPLACE
into table SCAN_FILE_INFO
fields terminated by "," optionally enclosed by '^'
TRAILING NULLCOLS
(scan_id, scan_filename
file_format_id
orig_scanning_resolution_dpi
scanner_id, scanner_operator_id
scanning_date "TO_DATE(REPLACE(REPLACE(:scanning_date,'TO_DATE('),'''YYYY-MM-DD'')'), 'YYYY-MM-DD')"
original_map_publication_id
reprint_publication_id)SY.

How to load my tree with data from SQL database????

Hello friends
May i know how i can load my tree with my database??
i have 3 different tables and i need them to be the 3 main nodes of my tree
They are
1.fiche
2.amis and
3.famille
and in each of these nodes need to load the 3 databases
thank u in advance

Heres my program so i loaded my vector ,
Now how can i integrate the coding u gave me, and where ??
Is it where i put the quetion mark?
if so
can you tell me how?? because i didnt understood well the codings you gave me as im nt at all familiar with this
Thank you in advance
public class carnetf extends javax.swing.JFrame {
   DefaultMutableTreeNode root =null;
    public carnetf() {
       root= new DefaultMutableTreeNode("Carnet");
        DefaultMutableTreeNode tnFiche=new DefaultMutableTreeNode("Fiche");
       root.add( tnFiche);
        DefaultMutableTreeNode tnAmis=new DefaultMutableTreeNode("Amis");
        root.add( tnAmis);
        DefaultMutableTreeNode tnFamille=new DefaultMutableTreeNode("Famille");
        root.add( tnFamille);
       initComponents();
    public Vector vecfiche() {
        Vector v = new Vector();
        Connection connection = null;
        try
            Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
            DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());;
        catch (Exception E)
            System.out.println("Unable to load driver.");
            System.out.println(E.getMessage());
            E.printStackTrace();
            return null;
        try
            connection = DriverManager.getConnection( "jdbc:microsoft:sqlserver://localhost:1433;user=sa;password=sa;DatabaseName=carnet");
        catch (Exception E)
            System.out.println("Unable to connect.");
            System.out.println(E.getMessage());
            return null;
        try
            Statement Stmt = connection.createStatement();
            if(jRadioButton1.isSelected()==true)
                String Query = "SELECT * FROM fiche";
            ResultSet RS= Stmt.executeQuery( Query );
            while ( RS.next())
             v.add( new vecfiche( RS.getString("Nom"), RS.getString("Prenom")));
            if( RS!= null) RS.close();}
            if(jRadioButton2.isSelected()==true)
                String Query = "SELECT * FROM amis";
            ResultSet RS= Stmt.executeQuery( Query );
            while ( RS.next())
             v.add( new vecfiche( RS.getString("Anom"), RS.getString("Aprenom")));
            if( RS!= null) RS.close();}
            if(jRadioButton3.isSelected()==true)
                String Query = "SELECT * FROM famille";
            ResultSet RS= Stmt.executeQuery( Query );
            while ( RS.next())
             v.add( new vecfiche( RS.getString("Fnom"), RS.getString("Fprenom")));
            if( RS!= null) RS.close();}
            if( Stmt!= null) Stmt.close();
        catch (Exception E)
            System.out.println("Unable to query.");
            System.out.println(E.getMessage());
            return null;
        try
            connection.close();
        } catch (Exception E)
            System.out.println("Unable to close.");
            System.out.println(E.getMessage());
            return null;
        return v;
    }

Filtering data with date birth

Hi ,
i added a field(date of birth) in Candidate search page in irecruitment through Additional Search criteria DFF..
This search filtering the data whatever date of birth matching record .But i need candidates having date of birth on or before my entered value .
How do i get this ?
Is it possible througd personalization ?
pl guide me ..
regards,
kumar
Message was edited by:
kumarduraipandi

Can you check if the page uses a query region, if yes then you can enable advanced search programmatically by setting a property on the queryBean. If it is a manual search region then you can add the items through personalization and write code in the controller and AM by extending them. You can do the same with query region simple search panel as well.

Query For Retrieving Data With Date and grouping

Hi Guys
I am having a hard time to figure out the sql query.
I have a table with data. Below is the illustration.
date location item description
1 jan 14 A apple desc1
2 jan 14 A apple desc2
3 jan 14 B apple desc1
4 jan 14 B apple desc2
1 jan 14 A orange desc1
2 jan 14 A orange desc2
3 jan 14 B orange desc1
4 jan 14 B orange desc2
My question it how to get the latest date on each location and item along with the description field
This is the result I want
date location item description
2 jan 14 A apple desc2
4 jan 14 B apple desc2
2 jan 14 A orange desc2
4 jan 14 B orange desc2
Thanks.

provided it a datetime/date field you've for date you can do this
SELECT [date],location,itemdescription
FROM
SELECT [date],location,itemdescription,
ROW_NUMBER() OVER (PARTITION BY location ORDER BY [date] DESC) AS Rn
FROM table
)t
WHERE Rn = 1
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Replacement of FORECAST DELIVERY DATE with DATE OF FIRST RECEIPT

Please help me in my scenario below and post your valuable comments-
My Scenario is like -
For example, In REPORT, For the item 10 of the order 4700035361 our FIRST RECEIPT DATE is in march (14/03/2011) and FORECAST DELIVERY DATE is in december (30/12/2011). This purchase order item was completely received.
Requirement is like---
Associated cube is ZCUIMP01.
(1) The evolution will consist of replace the FORECAST DELIVERY DATE with FIRST RECEIPT DATE of the item.
(2) The period (Fiscper and Fiscyear) will also be modified.
(3) Hence the calculation of the YTD will take into account the order and its receipt date.
(4) The adjustment of the history will be necessary for the year 2011.
Can anyone suggest, from where i should start my analysis (Should it be Infocube level??).
What will be the approach to fulfill all the above mentioned requirement (Should we think about Remodeling concept for creating new data model, if yes then how to do?).
Please reply asap, it will be great help for me.
My advance thanks to you.
Thanks & Regards
Rupali Singh

Hi Rupali,
As I understand there is a business change that you need to justify in our report. Unfortunately your explanation of the design has a considerable gap to visualize. In any case, if you need help on to how to approach such a change -
1. Understand the business change, its purpose and its imapct on your current design and the report.
2. Understanding the purpose is very important since you will then be able to find workarounds, redesign as per the change required.
3. Start from the query and check if your replacement of characterisitics with new characteristics can be obtained using functions like Replacement path, attributes, customer exits, etc. Changing a query/creating a new report on the existing model is the most feasible option.
4. If not, try exploring option to keep the design untouched, and creating a new InfoObject/DSO like structure to capture the date modifications, etc which then can be used on a MultiProvider.
Hope the above helps!
Regards,
Kunal Gandhi

How i map the caf data with data of UWL in web dynpro

Hi Experts,
i created a bpm project with nwce 7.1.1 and it have a independent caf to keep it's data and status.
now i have to create a view(use web dynpro) such like UWL,
my question is
how i map the caf data with UWL, and let the view can open the task(popup a window, just like UWL do) for user to finish their job?
thanks.

Hi Vic
Your requirement is exect functionality of UWL based on WEBDYNPRO, CAF and BPM for automation? ,and question is How to use CAF with WD or CAF with UWL API's ?. please clarify it.
Please fo through from given doc misght give u some idea
1. [How to develop Web Dynpro UI for your CAF project |http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID0722080650DB02400261803144436507End?blog=/pub/wlg/5414]
Best Regards
Satish Kumar

Query For Retrieving Data With Date

Hi Guys
I am having a hard time to figure out the sql query.
I have a table with data. Below is the illustration.
date location
item
1 jan 14 A
apple
2 jan 14 A
apple
3 jan 14 B
apple
4 jan 14 B
apple
1 jan 14 A
orange
2 jan 14 A
orange
3 jan 14 B
orange
4 jan 14 B
orange
My question it how to get the latest date on each location and item
This is the result I want
date location
item
2 jan 14 A
apple
4 jan 14 B
apple
2 jan 14 A
orange
4 jan 14 B
orange
Thanks.

Try the below:
create table #temp (sdate datetime,location char(1),Item varchar(20))
insert into #temp values('1 jan 14','A','Apple')
insert into #temp values('2 jan 14','A','Apple')
insert into #temp values('3 jan 14','B','Apple')
insert into #temp values('4 jan 14','B','Apple')
insert into #temp values('1 jan 14','A','Orange')
insert into #temp values('2 jan 14','A','Orange')
insert into #temp values('3 jan 14','B','Orange')
insert into #temp values('4 jan 14','B','Orange')
;With cte as
Select * , Row_Number()Over(partition by location, item order by sdate desc) Rn
From #Temp
Select * From cte Where rn=1 Order by Item asc,location asc
drop table #temp

How to repeat data with Data Merge?

How can I repeat data in the same text block with Data Merge? I have an Excel file with a class schedule that I need to import but when I use Data Merge, it wants to create a new page for each line. I want to keep the data in one text block per page and use Data Merge so when I get the new Excel file, it will be easy to update. This seems like it would be a simple thing to do, but I can't find the answer. Can anyone help?

Time for me to sound like a broken record. Data merge could be used for this but I don't think it was ever intended for such recurring publications like you are making. There will always be a lot of repetitive work that always will need to be performed after each update.
Instead, I think you should read up on using an XML workflow. Now, the XML out of excel needs transformed to be viable inside ID. But that is reasonably easy and can be done in an XML editor or upon importing into ID. Though it has been set aside for a time, I am making an example of a college course catalog for a customer. I'll see if I can finish it off by the weekend. If so, I'll post it to this thread.
Take care, Mike

Incorrect date with date from Windows ics Files since installing OS X Mountain

since installing OS X mounting the introducing fo dates with windows ics files is 5 month earlier. With iPhone no problem.

I'm having the same problem on my late 2008 MBP 15". Never had a problem before installing Mountain Lion.   Now I have to reboot about 4-5 times a week.
My computer doesn't lock up completely.    But Wi-Fi stops (you see only one black line on the WiFi icon), the clock stops (I was wondering why it seemed so early earlier tonight - the clock had been stopped for two hours) and many, but not all applications are "not responding".    However, if I try to quit the applications that appear to be okay, then they also become "not responding".   I have to force shut each application and then I can reboot using the Apple>Restart... command.
One of the things I've noticed is that many times it's iTunes that has the "not responding" message when the other apps don't, even if I haven't used it.   I'm going to Quit iTunes and see if it still happens.
I don't think it's heat related. My computer feels no hotter than it ever did.
If 10.8.1 fixes this, I'm okay with it (although it was still sloppy for Apple to release with such a bug.)    But the question is whether Apple even knows about it, since they provide no mechanism for non-developers to report bugs.

Load interactive pdf with data from database

I am trying to understand our options for loading database data into an interactive pdf..?   Some of the data is not stored in the database and needs to be manually entered by the user in the interactive pdf.
Here is the interactive pdf I'm working with:
http://www.dcma.mil/dcman/NPP/files/dd1149.pdf
As I understand it, there are 2 options:
1. Create an xml file from the database data.   Users can manually import this xml file into this existing interactive pdf and then manually add the additional data, and save the interactive pdf.
Would users need to use Adobe acrobat Standard or Pro edition to import the xml data?
2. Create a XFA PDF form that's made with LiveCycle Designer.   Can this method create an interactive pdf so that users can enter additional data later and save the pdf?
   What adobe products are required to use this method?
thanks for any assistance..
-D

Yes,using LiveCycle you could accomplish this easily.Once you have your invoice form ready based on predefined XSD, you can easily update the form data by fetching the values from database using JDBC operation.Also you could email this updated form using Email service.
Thanks,
Wasil

Loading a combobox with data from a different domain

I have filled in a combobox with values from an .asp page and
have used it
successfully. The problem is that if the flash file is ran
from a different
domain from the load location, the combobox doesn't get
filled in (as
apposed to the error if I ran it off of my drive).
datafeed.asp spits out the appropriate stuff for the AddItems
function to
read correctly. (as I has said, it does work). The combobox
gets filled in
the development environment (Macromedia Flash MX Professional
2004) as well
as flash player.
But when I upload it to one of my other websites, the data is
never
retrieved. Even though that the webserver containing the data
feed, the
webserver hosting the flash file and my machine can all read
datafeed.asp.
Am I missing a setting that allows a flash file to read data
from another
domain?
The following code has been changed for security reasons. But
believe me it
works in its original format.
myData = new LoadVars();
myData.onLoad = AddItems;
myData.load("
http://www.mydomain.com/datafeed.asp")
function AddItems() {
for (i=0; i<numItems; i++) {
var ProductID = eval("myData.ProductID"+i);
var ProductName = eval("myData.ProductName"+i);
var ProductSale = eval("myData.ProductSale"+i);
var DataProvider = { productid
roductID, productsale
roductSale };
_root.application.chooseproducts.prodlist_cb.addItem(ProductName,
DataProvider);
Thank You,
Julian

not sure, but this might be what you need...
//allow loading of files from domain
System.security.allowDomain("
http://www.mydomain.com");

Loading master data with date-fields

Similar Messages

Maybe you are looking for