Loading Material group hierarchy

Hi all,
Can anybody help me in loading " 0MATL_GROUP_LKLS_HIER" datasource to BI. I am not seeing any stnd transfer rules for the same.How to load this hierarchy ?
Regards
KK

Hi ,
Pls use BW07 & BW10 Tcodes for generating the Hierarchy Data Source in R/3.
If its a set of hierarchy you can use tcode BW07 to generate datasoucre, and for standard hierachies you must be having datasources already created.
Now just replicate datasoucre in BW side, and in infopckage selection you can get newly created hierarchy. Select and schedule it, it will be loaded into BW.
For External Hierarchy in BW , download to Flatfild and then upload.
The useful link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb
**PLS assign points,if info is useful***
Regards
CSM Reddy
Message was edited by:
SM REDDY CHEMICALA

Similar Messages

Material group hierarchy in SAP Retail

Hi Guru's;
I'm looking to load hierarchy of material group in BW.
In the SAP source system the used standard transaction WG21, WG22CLWM for managing retail material group hierarchy.
I suppose that from those transaction there is a BW hierarchy to recover this datas.
I found this datasource 0MATL_GROUP_LKLS_HIER but when i made a test in RSA3 i can't select any hierachy.
Why ? Is there something special for this hierarchy that i need to manage ?
Thanks for Help
Cyril

Please check this answered link:
Re: Material Group Hierarchy
Re: Material Group Hierarchy
Re: Material Group Hierarchy
Edited by: Afshad Irani on Jul 1, 2010 1:03 PM

Material Group Hierarchy Level 1 - Description

Hi,
We required Material Group Hierarchy Level 1(0RPA_WGH1) DESCRIPTION. we find data source 0MATL_GRP_1_TEXT to
get description. that standard data source created based on table TVM1T. We did find any data in that table. kindly guide me
how to acheive this.
Thanks

hi rajendra,
just check table T023T, hope this will help u.
thanks

Report on Material group hierarchy

Dear All,
As we are runnning the report for material group hierarchy, Material
hierarchy is not appering in any of the standard reports like MB51,MB5B
etc.We need to take the report based on material group hierarchy,
Is there any standard report to fetch the Material group Hierarchy,.
How and what configuration needs to be done for mateiral group hierarchy. Any steps.please let me know.
Kindly guide us on this.
Regards,
Girish
0821-3983076

Hi praveen,
I know Material group in general. But my query is to get report in any standard report , Whether material group hierarchy is there?
Levels of Hierarchy with material group is there?
Thanks & Regards,
Girish

How to create material group hierarchy ?

Hi,
I would like to know how to create material group hierarchy in ECC 6.0
Thanks in advance for your help,
Kind regards,
Yann

Hi ,
The material group hierarchy and product heirarchy is used in SD of ECC 6.0 . These can be created in Logistics General -> Material Master-> settings for Key fields--> Data Relevant to Sales and Distribution-> 1)
define product categories
2)Define material groups
But If you want to make of use of this in SRM ,I won't think it is available . I guess Probably this is avl for CRM .
Regards
Mani
Message was edited by:
Manikanda Ilango S.

Is it possible to create a Material Group Hierarchy in SAP ECC?

Hi,
I'm trying to create a Material Group Hierarchy (not a Product Hierarchy) in SAP ECC.
I've read some discussions about this theme:
MM Material group hierarchy ?
but still I'm sure if it is possible to create a Material Group Hierarchy in SAP ECC or if it is only an IS Retail functionality.
Thanks in advance,
Luis.

Please check this answered link:
Re: Material Group Hierarchy
Re: Material Group Hierarchy
Re: Material Group Hierarchy
Edited by: Afshad Irani on Jul 1, 2010 1:03 PM

MM Material group hierarchy ?

Hi,
I was unable to find any material group <u>hierarchy</u> in MM (ECC60).
Is there any functionality to do this ?
My customer do want to have a search function by hierarchy to find the right material group to use in ME51N, ME21N...
Kind regards,
Yann

Hi Srinivas,
Thanks !
Hopefully, this transaction is available in my ECC60 configuration.
I wonder how to link two hierarchy levels ?
Here is my example :
01 Cables
01 Industrial
02 Network
So far, i was not able to create the industrial node under the cables one ....
Kind regards,
Yann
Message was edited by:
Yann Bouillut

Realtionship Material Group - Hierarchy

Hi experts,
I am developing an ABAP program that takes de material hierarchy from table KLAH and writes it to a text file. The problem I have is that I could not find the relationship between material group and hierarchy level. This what I've tried so far:
Looking for a table with such relationship - Did not find
Looking for a function module that can give this relationship - Did not find
Use ST05 and the run transaction WGUS - It gave me just tables KLAH, KSSK, MARA but I am not able to find this relationship using these tables..
Any suggestion will be highly appreciated
Thanks in advance,

Hi,
I have used the bapi BAPI_WRF_MATGRP_CHANGE for uploading the material in a retail project,
You can change an existing article hierarchy, delete it, or insert substructures. The functionality applies to the hierarchy, the language-dependent texts, and the articles.
Using the parameter HIERARCHY_DATA, the data for identification of a header record of an article hierarchy is transferred. This data consists of the hierarchy ID and the node. In addition, you have to set the indicator CHANGE for control of the functionality of the BAPI.
Here you can get the required relationship.
Hope this is of your help.
Reagrds,
Yashwin

Building Material group extractor

Hello,
My client requires an extractor to generate the material group hierarchy in BW. Since no hierarchy in R3 is maintained, we will be required to build the hierarchy through coding. This we know how to do it. My problem is how to load it to BW. Do i need to create a generic extractor or can we do it through the same extractor as Material group and make use of EXIT_SAPLRSAP_004 to load it or should we load it through file. Also what should be the minimun data that we should provide to built the hierarchy.
Thank you in advance for your answers.

Hi,
Since hierarchy is not maintained in R3,
1. You directly create hierarchy manually for material group in BW.
2. You prepare file and load the hierarchy through file.
for structure of the file you can refer the following link
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
Cheers

How to create material group in material master.

hi guru's
can anybody explain me how to create a new material group in material master.
i wantto add a material group while creating material master MM01..
thanks
sap-mm

Hi,
In this step you create material groups.
You also have the option of using the same transaction to carry out the following activities:
Creating superior hierarchy levels
Assigning the superior hierarchy levels to a material group hierarchy
Assigning the base material group to the material group hierarchy
Assigning characteristics profiles below material group level
Requirements
Your R/3 System is configured as an SAP Retail System.
Activities
1. Create superior hierarchy levels
   You create hierarchy levels using transaction WG01 (creating
   material groups) via menu options MG environment --> Hierarchy
   level --> Create
2. Assign the superior hierarchy levels to a material group hierarchy
   You assign hierarchy levels to a hierarchy using transaction WG01
   (creating material groups) via menu options MG environment -->
   Hierarchy level --> Maint. MG hierarchy
3. Create material groups (base material groups) and then maintain the
   pre-defined materials (reference material/material group material)
4. Assign the base material group to the material group hierarchy
   You assign the material group to the hierarchy using transaction
   WG01 (creating material groups)
5. Assign characteristics profiles below material group level
   You assign characteristics profiles using transaction WG01
   (creating material groups)
Further notes
When creating material groups and then maintaining the pre-defined materials (reference material/material group material) you should be aware of the following.
As these materials can be created automatically using a minimum of data, you should follow this procedure with a check and possibly further maintenance, especially of plant-specific data. The material group reference material should be defined in as much detail as possible so as to keep the workload to a minimum when you have to create more materials for this material group.
All hierarchy allocations involving a material group (base material group) and a higher or lower hierarchy level can be carried out on the initial screen (there is no need to switch to the detail screen). All further hierarchy allocations can be defined top-down when you maintain material group hierarchies.
Only the material groups are transported automatically!
Reward if useful.
Chandru

How many material groups?

The client i work for has more than 300 material groups? is this normal number of active material groups?

Just discuss with your client and reduce the count from 300 .
check in configuration for T.code OMSF for standard material group and if require create a new material group .
Material Groups and Material group hierarchy
material type and material group

Problem in Loading Material Hierarchy

Hi,
I am having problem while loading material hierarchy from R/3. Whenever i execute infopackage for infosource 0MATERIAL, I am getting following error msg.
<b>The node name for ID 00005983 contains invalid characters</b>
Diagnosis :
Node name DVD77ELR-D2        with node ID 00007774 contains lower case
letters or characters that are not permitted.
System response:
Processing was terminated
Procedure:
Change the node name so that it only contains permitted characters.
Procedure for System Administration
As a result the Request is in RED state.
Please suggest any solution ASAP.
Regards
Prasad
Note: Ponits will be awarded for fast and correct response.

Hi...
Thank you all for reply.
I have solved the problem. But this was not related to RSKC.
This was due to a material code DVD77ELR-D2 which was not created correctly. I have removed the hierarchy assigned to this material and marked it for deletion.
Now the hierarchy has been loaded perferctly.
Regards
Prasad

Import of material groups into hierarchy not possible (note 432339)

Dear All,
I am trying to replicate material groups (DNL_CUST_PROD1) from R3 system. Prior to this our SRM system configured as standalone and Material Hierarchy is already defined. When I am trying to replicate the material groups in SMQ2 I am receiving status as "sysfail" and further I am getting above message. In the message the OSS note also mentioned. In the OSS note they have given following solution
Error message "Import of material groups into hierarchy &1 not possible":
In transaction COMM_PRAPPLCAT, you specify that the hierarchy specified in the error message is to be used for application 'Purchasing' (02). This means that the material groups would be created in this hierarchy. Delete this setting in Transaction COMM_PRAPPLCAT. If hierarchy R3MATCLASS already exists, assign
hierarchy R3MATCLASS to application 'Purchasing'. Then the material groups are created in hierarchy R3MATCLASS. If you want to import the material groups into the hierarchy specified in the error message, you can also keep this hierarchy
assigned to application 'Purchasing' and deactivate the error message. Error message "Import of material types into hierarchy &1 not possible". You can do this in Customizing under 'Customer Relationship Management -> Master data -> Basic settings -> Define system message characteristics'.
My problem is I am not able to find out the path given in the OSS note ( i.e, Customer Relationship Management u2013 Master data) . Any one can help me in this regard ?
with regards
Ram

Hi ram
one upon a time supplier relation ship management and customer relation ship management comes under EBP node i.e ebp 3.5 versions.
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
plz visit Marchin blog to.o
since u r aleady in standalone but now you may try push material group from ecc to srm .
so you need to do set up all crm middleware settings in ecc and srm.
br
muthu

R3AS Load Objects - Changing Material Group Descriptions

Hello,
We use SAP ECC6 and SRM 5.
We currently have some R/3 Material Groups descriptions that need changing in our ERP system.
I am concerned with doing this as it appears that the material groups are replicated in SRM in the COMM_HEIRARCHY, albeit that they are not actually used in SRM.
The issue I have, is when using R3AS to load the material groups, which load object should I use to just amend descriptions?
It states in our documentation:
DNL_CUST_BASIS3 - BASIS CRM Online. We use this for the initital load, i.e. a new build
DNL_CUST_PROD1 - Product: Categories. We used this one for new product categories
DNL_CUST_PROD0 - Material Number Coversions. I don't know what this is used for
MATERIAL is for R/3 Material Master. I don't know what this is for
Can someone please advise which load object would be relevant to use, and also clarify what DNL_CUST_PROD0 and MATERIAL is used for.
Many Thanks
Lisa Pallas

Hello Lisa,
Customizing object DNL_CUST_BASIS3: for data as Units of Measurement, currency, etc.
Customizing object DNL_CUST_PROD1: to replicate R/3 product categories
Customizing object DNL_CUST_PROD0: linked to customizing ( IMG: SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Master Data > Products > Define Output Format and Storage Format of Product IDs
Business object MATERIAL: to replicate R/3 materials
According to your need, you have only to reload customizing object DNL_CUST_PROD1.
Regards.
Laurent.

Product heirarchy vs material groups in sales view

Hi,
Can I make use of the material groups(5 in toatl in sales view1) to generate report for seeing the value/sale of any material instead of using product heirarchy ?
If I have created a 3 level heirarchy then how best I can use it to see in a report for any level.
Is there any standard report availble to track my sales/inventory needs based on product heirarchy ??
How can I track my purchases/open orders based on the employee resonsible for that material.i.e without having any HR module how can use the or create the staff of my company engaged in purchasing or for that matter selling also.
May be I can use Purchasing group for each employee.But then I need to use the same employee as Sales person.
How can this be achieved or any better option ??
Thanks in advance.
Regards,
Manoj

Hi,
Have you considered using the partner functions to do this.
Most organisations create a new partner type for saleperson (i.e. someone who earns the commision from the sale). This can automatically default if you have the correct master data settings, or can be keyed manually on the partner screen of the sales order. (ask about how to do this on the SD forum, I am sure that an SD expert can tell you the details on how to do this.
I definitely would NOT recommend considering using the Purchasing group, this is not a field to use for this purpose in any way.
The material group and material hierarchy are fine to use for reports on WHAT was sold, but not who by etc.
Steve B

Loading Material group hierarchy

Similar Messages

Maybe you are looking for