Loading MD question
Usually after the load is completed, it shows all green in the Monitor. But I found in one of our InfoObject has yellow triangles for two of the Data Packages. The overall result turns to green already. What does this yellow mean? Thanks!
The yellow triangle display the following message under the package:
Updating attributes for InfoObject USITMSTR : 100001 -> 99999 Data Records
All under are green. No other message then this.
Similar Messages
-
When trying to download apps on my new iPad I keep getting prompted to update my security questions for my safety. When I choose this option it freezes and won't load the questions, however, when I hit not now it won't let me download. What do I do?
Reboot your iPad and then see if you can set the security questions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Hi all,
I have a service object (SO1) which has been set to Load Balancing.
This service object has an attribute which serves as a number allocator
(NA1).
This NA1 provides a unique number across the whole application for each of
the record that require to store into DB.
The problem is, will the NA1 get replicated if the SO1 is replicated?
If yes, will NA1 crash?
Regards,
Martin Chan
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Senior Analyst/Programmer
Dept of Education and Training
Mobile : 0413-996-116
Email: martin.chandet.nsw.edu.au
Tel: 02-9942-9685Hi Serge,
Could you prefix it with the PID of the load balanced process ?No I can't. At least not at the moment.
When a service object is replicated, it is automatically replicated into adifferent partition...
Thanks.
An advice, make the NA1 shared. So if you get to do multithreaded accessto
it, you won't screw up things.I am thinking it may be better off to create it as a service object on it's
own.
How is the number returned by the NA1 generated ?It gets generated by Forte's code.
... Try to make it so that the
load balanced partitions don't need to access the database more than onein
5 min. to get a new Seed Key. This would not need to PID.Thanks for your advise.
Regards
Martin Chan
-----Original Message-----
From: Serge Blais [mailto:Serge.BlaisSun.com]
Sent: Tuesday, 3 April 2001 14:17
To: Chan, Martin
Subject: RE: (forte-users) SO Load Balancing Question
Your right, they can generate the same number. How much control do you have
over the ID being generated? Could you prefix it with the PID of the load
balanced process ?
Just a note: When a service object is replicated, it is automatically
replicated into a different partition, possibly on the same machine or on a
different one.
An advice, make the NA1 shared. So if you get to do multithreaded access to
it, you won't screw up things.
How is the number returned by the NA1 generated ? If NA1 is using a stored
procedure, or something like:
Start TRX
read number
newnumber = number+5000
write back newnumber
End Trx
Something like will be very safe. The Database Index Table is taking care
of the critical section. Then you can be sure that each replicate can be
independent (not hit into each other) for 5000 iterations. Depending on the
frequency, you may want to up this number or lower this number. Too high it
would make the key very high very soon with wholes in the sequence. Too low
and you would have hit between the replicates. Try to make it so that the
load balanced partitions don't need to access the database more than one in
5 min. to get a new Seed Key. This would not need to PID.
Serge
At 01:59 PM 4/3/2001 +1000, you wrote:
Hi Serge,
The number return by the NA1 is used as a primary key for each of therecord
that stores in the DB.
The Number Allocator NA1 is required to access to DB to update an ID table
which carry the next available sequence number. NA1 will only update this
table for every 5000 records.
For example, the initial value of the sequence is: 1
The next update will change the value to 5001, next will be 10001 and soon.
>
The properties of this NA1 class at runtime
Shared - Disallowed
Distributed - Disallowed
Transactional - Is Default
Monitored - Disallowed
Unfortunately, this attribute is not a handle but is instantiated by theSO1
itself.
I have been thinking, if SO1 is replicated within the same partition, and
each replicate will carry its own NA1. NA1 and the replicate of NA1 may
return a same number if their initial values of the sequence are the same.
Correct?
Regards
Martin Chan
-----Original Message-----
From: Serge Blais [mailto:Serge.BlaisSun.com]
Sent: Tuesday, 3 April 2001 13:11
To: Chan, Martin; forte-userslists.xpedior.com
Subject: Re: (forte-users) SO Load Balancing Question
Let's see if I understand right.
You have a service object that keep a handle to an object that either keep
state information, or that generate state information. Now the thing to
figure out is which is it. Let's assume that NA1 is a number generator,
that does not need to be synchronized or that doesn't need to access any
external resource. It would still work, depending on the algorythm you are
using.
Will they share the same NA1? It depends on the nature of NA1, but for sure
NA1 would have to be an anchored object. An if multiple partitions would
share the same object "only" for key generation, you would bring down your
performance on key generation or key update (by adding one inter-process
call).
In short:
1. Many scenarios can happen, you need to be clearer on your description.
2. If you are sharing an object by load balanced partitions, this greatly
reduce the gain of load balancing the partition.
3. If NA1 is keeping state, any access to it would need to be controlled
"shared".
Have fun now...
Serge
At 12:30 PM 4/3/2001 +1000, Chan, Martin wrote:
Hi all,
I have a service object (SO1) which has been set to Load Balancing.
This service object has an attribute which serves as a number allocator
(NA1).
This NA1 provides a unique number across the whole application for each
of
the record that require to store into DB.
The problem is, will the NA1 get replicated if the SO1 is replicated?
If yes, will NA1 crash?
Regards,
Martin Chan
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Senior Analyst/Programmer
Dept of Education and Training
Mobile : 0413-996-116
Email: martin.chandet.nsw.edu.au
Tel: 02-9942-9685
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comSerge Blais
Professional Services Engineer
iPlanet Expertise Center
Sun Professional Services
Cell : (514) 234-4110
Serge.BlaisSun.comSerge Blais
Professional Services Engineer
iPlanet Expertise Center
Sun Professional Services
Cell : (514) 234-4110
Serge.BlaisSun.com -
VSTS load test QUESTION : While recording the webPerformanceTest, is it is possible to clear / force to clear cache without stopping or closing the IE on recorder?
I am facing issue, while recording the webtest, our application first time loading any screen calls some requests and 2nd time when browsed the same information if it is available at cache then it will not
call the requests again.
How can i force the VSTS to clear cache while recording, so that i can record those requests which gets called at the first time.
Regards
SatishKHi SatishK,
Thanks for your reply.
>>but my question was while recording (During recording using web test recorder) i want to clear cache.
Based on your issue,
I did some research about it,
but I still find the official document about it. Generally, I know that if we want to clear the web performance test by the
Cashe Control properties, so I think that it is not possible to clear the cashes when we are recording the web performance.
If you still want to this feature for web performance test, I suggest you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You
can send your idea there and people can vote. If you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Even in safe mode, Firefox 4b7 is not able to complete «More Answers from…» action on Formspring.me userpages, it just displays «loading more questions…» for a seemingly endless amount of time. (Firefox 3.6 and any other browser, such as Safari, displays «loading more questions…» for a short period of time when AJAX works, then the questions and answers are actually loaded and displayed.) In order to reproduce, load Firefox 4b7 in Safe Mode, visit www.formspring.me/krylov and click on «More Answers from Konstantin Krylov» (the bottom link). You may try any other user, www.formspring.me/teotmin or www.formspring.me/anandaya for example.
what a waste of money sending an engineer to "fix a fault" which does not exist. Precisely.
In my original BE post to which Tom so helpfully responded, I began: It seems to me that DLM is an excellent concept with a highly flawed implementation, both technically and administratively. I think that sending out an engineer to fix an obviously flawed profile is the main example of an adminastrative flaw. I understand (I can't remember source, maybe Tom again) that they are sometimes relaxing the requirement for a visit before reset.
Maybe the DLM system is too keen on stability vs speed. This will keep complaints down from many people: most users won't notice speed too much as long as it is reasonable, but will be upset if their Skype calls and browsing are being interrupted too often.
However, it does lead to complaints from people who notice the drops after an incidence (as in your thread that has drawn lots of interest), or who only get 50 instead of 60. The main technical flaw is that DLM can so easily be confused by drops from loss of power, too much modem recycling, etc, and then takes so long to recover. -
i'm using firefox version 6 and for the last three days the add-ons manager page won't load. my question is why won't the add-ons page load? is the server down on your end?
Click on something below the Get Add-ons menu item on the left side of the Add-ons Manager tab.
-
My company is in the process of building a small scale network architecture strictly for testing purposes. We have a DMZ area that contains 2 load balancers and 1 web server. The web server is a SunFire 280 and has two gig e nics. They want to cable one nic to one load balancer and one nic to the other. Since this is only one box we have to put the nics on separate subnets. The question is, can I configure the load balancers in a failover situation of an active active situation with one load balancer on one vlan and another load balancer on a separate vlan.
I did not able to understand why you want to give ip to two NICs from different subnets.
There is NO any requirement, like that. If you have your own requirement can you explain me that?
Ashman -
Pictures loading with question marks
Lately whenever I load websites like pinterest or netflix the pictures never load. Instead blue boxes with white question marks load. My sister has a mac as well and this has been happening to her too. How do i fix this?
HI Alyssaa ...
Several things to try ...
Make sure: Display images when the page opens is selected in Safari > Preferences > Appearance
Empty the Safari cache more often. From the Safari menu bar top of your screen, click Safari > Empty Cache
If that didn't help, back to the menu bar, click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Quit thren relaunch Safari.
If that didn't work, open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly has you see it here:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go
Move the Cache.db file to the Trash.
Try Safari. -
I hope that someone can help with 2 simple (i think) CSS questions.
1. When configured properly for load balancing, should the CSS round-robin between servers or will it continue to use only one server until triggered by some event or parameter?
2. If 1 of 2 load balanced servers fails, how does load balancing proceed? Will it continue to try to load balance between the servers or will it give up on the failed server unitil some event or timeout occurs?
Thanks in advance,
EliotHi Eliot,
The CSS can be configured to perform load balancing in a variety of different ways. Least connections, round robin, ACA etc. Each new connection through the CSS will be round robined over each of the servers in your server group.
If a server fails then the CSS will know it has failed through the use of keepalives (based on TCP connection, ICMP etc) and no longer send requests through to that server. Traffic associated with a previous connection to the failed server will be sent to on of the surviving servers. It is then up to the behavior of the application as to if the user experiences any disruption.
Hope this helps
Brett -
Clustering problems and load balancing question
I am using Weblogic 6.1. My Windows NT environment consists of 10 web client-simulator
machines, 2 App. Server machines and one database server machine. I have defined
one cluster on each app. server. Each cluster is running 3 Weblogic instances, or
so it should be when I fix my problems!
My questions/problems are the following:
1. Can I use a software dispatcher to perform workload balancing between the 2 weblogic
clusters? That is, the client-simulator machines send the requests to the software
dispatcher which performs workload balancing between the 2 Weblogic clusters. The
clusters perform round-robin amongst all instances. Note that the documentation only
talks about Hardware Balancing.
2. I am having problems with my multicast IP addresses. For instance, on one App.
Server machine, I am using the multicast IP address: 239.0.0.1 for MyCluster. When
I start the Admin Server, I get a JDBC error: "... multicast socket error: Request
Time Out". I have used the utils.MulticastTest utility which shows the packets not
being received:
I (S1) sent message num 1
I (S1) sent message num 2
I (S1) sent message num 3
I (S1) sent message num 4
What am I doing wrong?
3. Re. the cluster configuration:
NOTE: I have executed my workload using 2 independent App. Server machines with a
software dispatcher - no clustering. Each App. Server used a jdbc connection pool
of 84 database connections. The db connections happened to become my bottleneck.
When I tried to increase the number of connections in the jdbc pool, throughput decreased
dramatically. Thus, I decided to add a cluster of Weblogic instances to each one
of my 8 x 900Mhz machines in order to scale up. Unfortunatly, adding clusters have
not been that simple a task - probably because I am totally new to the Web Application
Server world!
Here is what I've got so far:
I have obtained 3 static IP addresses for the 3 instances of Weblogic instances that
I wish to run within the cluster. All servers in the cluster use port number 80.
There is a corresponding DNS entry for each IP address. My base assumption is that
one of these instances will double up as the Administration Server... Is it true,
or do I need to define a separate Admin server if I wish to run 3 Weblogic instances
(each with a connection pool of 84 database connections for a total of 252 database
connections)?
Do I need to re-deploy my applications for the cluster? And if so, would this explain
why I am having problem starting my Admin Server?
I think this is it for now. Any help will be greatly appreciated!
Thanks in advance,
Guylaine.
Guylaine Cantin wrote:
> I am using Weblogic 6.1. My Windows NT environment consists of 10 web client-simulator
> machines, 2 App. Server machines and one database server machine. I have defined
> one cluster on each app. server. Each cluster is running 3 Weblogic instances, or
> so it should be when I fix my problems!
>
> My questions/problems are the following:
>
> 1. Can I use a software dispatcher to perform workload balancing between the 2 weblogic
> clusters? That is, the client-simulator machines send the requests to the software
> dispatcher which performs workload balancing between the 2 Weblogic clusters. The
> clusters perform round-robin amongst all instances. Note that the documentation only
> talks about Hardware Balancing.
>
We also support software load balancers (for e.g. resonate)
The software dispatcher should be intelligent enough to decode the
cookie and route the request to the appropriate servers. This is
necessary to maintain sticky load balancing.
> 2. I am having problems with my multicast IP addresses. For instance, on one App.
> Server machine, I am using the multicast IP address: 239.0.0.1 for MyCluster. When
> I start the Admin Server, I get a JDBC error: "... multicast socket error: Request
> Time Out". I have used the utils.MulticastTest utility which shows the packets not
> being received:
>
> I (S1) sent message num 1
> I (S1) sent message num 2
> I (S1) sent message num 3
> I (S1) sent message num 4
> ...
>
> What am I doing wrong?
>
You should run the above utility from multiple windows and see if each
of them being recognized or not.
i.e. java utils.MulticastTest -N S1 -A 239.0.0.1
java utils.MulticastTest -N S1 -A 239.0.0.1
> 3. Re. the cluster configuration:
>
> NOTE: I have executed my workload using 2 independent App. Server machines with a
> software dispatcher - no clustering. Each App. Server used a jdbc connection pool
> of 84 database connections. The db connections happened to become my bottleneck.
> When I tried to increase the number of connections in the jdbc pool, throughput decreased
> dramatically. Thus, I decided to add a cluster of Weblogic instances to each one
> of my 8 x 900Mhz machines in order to scale up. Unfortunatly, adding clusters have
> not been that simple a task - probably because I am totally new to the Web Application
> Server world!
>
You have to stress test your application several times and set
maxCapacity of the conn pool accordingly.
> Here is what I've got so far:
>
> I have obtained 3 static IP addresses for the 3 instances of Weblogic instances that
> I wish to run within the cluster. All servers in the cluster use port number 80.
> There is a corresponding DNS entry for each IP address. My base assumption is that
> one of these instances will double up as the Administration Server... Is it true,
> or do I need to define a separate Admin server if I wish to run 3 Weblogic instances
> (each with a connection pool of 84 database connections for a total of 252 database
> connections)?
BEA recommends to use Admin server for administrative tasks only
like configuring new deployments, jdbc conn pools, adding users etc..
It's not a good idea to have admin server part of cluster.
>
> Do I need to re-deploy my applications for the cluster? And if so, would this explain
> why I am having problem starting my Admin Server?
>
You have to target all your apps to the Cluster.
> I think this is it for now. Any help will be greatly appreciated!
>
> Thanks in advance,
>
> Guylaine.
>
-
Office Web App Load balancing Question
I am going to install office web app in load balanced farm behing f5. There are few questions i want to ask:
Do i first put servers in load balancer and start installing office web app or after installation of office web app in one server put that in load balancer and add another one or put both in load balancer and start installing.
While i tried without putting servers in load balancer with offload ssl parameter , when i tried to join second server in the farm it gave me error destination unreachable. Is it because with offload ssl parameter it is looking for load balancer or something
else? I checked port 809 from the servers and also verified the user was local admin in both machines.
Any insight will be helpful.
AditPls refer below link for configuration of NLB for OWA servers:
http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
Please ensure that you mark a question as Answered once you receive a satisfactory response. -
Hypothetical RAC load balancing question
Im trying to get a better understanding of RAC. Suppose I have the following tnsnames entry on Client1:
DEV =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = dev010.net)(PORT = 1795))
(ADDRESS = (PROTOCOL = TCP)(HOST = dev020.net)(PORT = 1795))
(LOAD_BALANCE = yes)
(FAILOVER = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dev1)
(failover_mode=(type=select)(method=basic))
dev010.net and dev020.net are two nodes that I am trying to balance the connection from Client1 to.
dev010.net and dev020.net have the following listener.ora configurations respectively:
LISTENER_DEV1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = dev010.net)(PORT
= 1795))
SID_LIST_LISTENER_DEV1 =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/ora92)
(PROGRAM = extproc)
(SID_DESC =
(ORACLE_HOME = /oracle/ora92)
(SID_NAME = dev1)
LISTENER_DEV2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = dev020.net)(PORT
= 1795))
SID_LIST_LISTENER_DEV2 =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/ora92)
(PROGRAM = extproc)
(SID_DESC =
(ORACLE_HOME = /oracle/ora92)
(SID_NAME = dev2)
Question: since 'lsnrctl services' shows LISTENER_DEV1 and LISTENER_DEV2 are registered with services dev1 and dev2 respectively, how do I load balance Client1's connection between the two nodes if its service name is set to dev1?
Can you set up RAC with some sort of master listener?
Im new to RAC, so any help would be appreciated.Try this:
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = DB1.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = DB1)
(ADDRESS =
(COMMUNITY = MYRAC.WORLD)
(PROTOCOL = TCP)
(HOST = )
(PORT = 1521)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = DB101)
(ORACLE_HOME = /oracle/Ora92)
(SID_DESC =
(SID_NAME = DB102)
(ORACLE_HOME = /oracle/Ora92)
) -
Exchange 2013 Load Balancing Question
Hey Everyone,
I have recently started building up my companies Exchange 2013 environment and ran into some questions that I can't seem to find clear answers for on Google.
First, a little bit about my set up:
2 CAS Servers
2 Mailbox Servers
Citrix NetScaler load balancing the external URL (Controlling all incoming ports 25, 80, 443, 587, 993, and 995) to both of my CAS servers
This is not doing SSL offloading, it's just forwarding encrypted traffic to the CAS servers
I have configured a DAG between the 2 mailbox servers and am able to actively move the database my user account is on between the 2 copies with outlook disconnecting / reconnecting in about 10 - 15 seconds of moving it.
My questions started when I saw what Outlook was filling in for the "Server" field once autodiscover set it up. I found this very strange server name in it: *** Email address is removed for privacy ***
Once I read up on it, I think i understand what it does. If i understand correctly, this weird URL is sort of like an old CAS array from Exchange 2010. When I started testing the failover is when I started running into issues.
When I shut down one of my mailbox servers, my outlook will lose connection and it won't come back. The mailbox database that my user account is on successfully failed over to the other DAG copy but outlook never correctly connects. I
believe this issue has something to do with the new CAS functions of Exchange 2013 since DAG works fine.
If I look at my "Connection Status" in Outlook, I see that there are several connections open. All of them have a Proxy server address of "exchange.domain.com" and out of the 3 that show up there, they are all pointed to
the weird URL mentioned above.
Whew, long post but let me summarize my questions below:
1) If exchange is configured to be fully redundant, why does my outlook disconnect when I shut down one of the servers?
2) What is the weird URL pointing to that I mentioned above that is showing in outlook?
3) How can I get outlook to correctly not lose it's connection when any 1 of the servers goes down?
Thanks,
ZacHi,
According to your description, it seems that the load balancer did not configure successfully.
I recommend you refer to the following article to configure the load balancer for Exchange 2013 :
http://blogs.vmware.com/vsphere/2012/11/load-balancing-using-vcloud-networking-and-security-5-1-edge.html
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support -
Connection Load Balancing question
Hi All,
this is from oracle net8 Administrator's Guide (between double quotes):
"Connection load balancing improves connection performance by balancing the number of active connections among multiple dispatchers. In an Oracle Parallel Server environment, connection load balancing also has the capability to balance the number of active connections among multiple instances. "
My question is, from that statement above, does it mean that the connection load balancing can only be useful on a OPS with MTS instances?
and second is , does it make sense (or can it be done) to implement it on single instance of MTS?
TIA,
AndiHi Andi,
CLB is only used in cluster configuration! In single node instance there is no advantage for ovbious reason of putting one more layer.
you are right...use only with OPS and preferably with MTS.
Best,
G -
In an effort to explain my question as best I can, I will
name the three swf files A, B, and C.
So I have swf A which has an opening call to load swf B into
an empty container inside swf A. This works just fine using:
loadFile("B.swf");
Now, once swf B loads into the container which contains an
"enter site" button, I cant figure out how to load swf C into swf
A's container to replace swf B. Does that make sense? I have
uploaded my struggle so far for you to see...
http://vojodesign.com/proofs/bohemianInd
Thanks in advanceHmmm, I'm not quite sure what you mean. Here is what I have
currently inside swf A's timeline. Where do I plug in the code you
suggested?
btnEnter.onRollOver = over;
btnEnter.onRollOut = out;
btnEnter.onRelease = function() {
if(current != "bohemianIndHome.swf")
loadFile("bohemianIndHome.swf");
function over():Void {
this.over = true;
this.play();
function out():Void {
this.over = false;
this.play();
} -
Flash MX2004 Loader Component Question
Hi all,
I have a question regarding the loader component that ships
with Flash MX 2004. I am using the component to load .swf files. As
far as I can tell, the component will not begin to play a .swf file
until it is 100% loaded. Is this correct? If not, is there any way
to make it play as it is downloading? This IS possible with the
MovieClipLoader class but I currently have a complex application
built using the loader component.
If anyone has any suggestions, I would appreciate it.
Additionally, I could extend the class if anyone can point me in
the direction of what would need to be changed in the class.
Thanks,
JohnI'm only trying to interpret what that message is telling me in this response. It seems to be indicating that you have some object in the library that you have named "calLoader" and assigned it a linkage ID of Loader (possibly by default) as well as another object in the library named myLoader that has the same linkage ID (possibly by default).
If these two objects are the same component type, then you only need one of them in the library. The different naming of them can be managed on the stage.
Maybe you are looking for
-
How to read ,compare and search unicode in we8mswin1252 ?
HI, I having face a trouble while reading and search Unicode for my project module and its totally dependent on Unicode data for displaying and retrieve operation in oracle 11g sql develop. code is as following in ORACLE 11G SQL DEVELOPER FLOW IS
-
Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?
-
Hi all, I work with forms 6i and database oracle 8. I want to know if it's possible to count the number of column in a sql query. For exemple, i have : "select id, name, dtbirth from table". In this query, I have 3 column. But I don't know how can I
-
How do i open photos in photoshop elements 9
I have loaded Photoshop Elements 9 on my MacBook Pro and cannot open photos. I also have IPhoto running
-
List of sysctl add/del/changes between Tiger and Leopard
I've ran a quick diff between the sysctl values in Tiger and Leopard. Note: This is from two different macbook's, so some values may be changed due to hardware. This should give folks an idea as to what buffer sizes, performance tweaks, etc. have bee