Loading modules using ModuleManager
Hi,
I am having a strange issue with ModuleManager, When using ModuleManager "ready" event is not getting fired on first time. It works if I try loading agin. Why is this ?
-Gireesh
Hi,
I am using Flex 3.5. I am not sure if its a GC issue, Its very small test application , If I use ModuleLoader and create the ModuleLoader in MXML and load the module it works, But if I create 'ModuleLoader' using 'new' keyword or use ModuleManager.getModule method it doesnt work, but it works if I call it again.
-Gireesh
Similar Messages
-
Load modules using moduleLoader url property?
My requirement is to load a module using URL like following
'/somthing.swf?a=b&b=c'
so that it can load the module and set a few values after it is loaded. But when i create an instance of the moduleLoader and set the Url property nothing is happening. My code is as follows
url += constructUrl()+"?"; // something like 'modules/vst/visitModule.swf' will be returned
if(_modLoader){
_modLoader.addEventListener(ModuleEvent.READY,readyMod);
_modLoader.addEventListener(ModuleEvent.ERROR,loadError);
_modLoader.addEventListener(ModuleEvent.PROGRESS,loadProgress);
_modLoader.addEventListener(ModuleEvent.UNLOAD,unload);
_modLoader.applicationDomain = ApplicationDomain.currentDomain;
_modLoader.url = url;
Do you see something wrong here? I'm using Flex 3.2.
I've read in the following forum for the solution http://forum.springsource.org/archive/index.php/t-65228.html but could not get it to work. Still trying.
ThanksWell the if statement guarding the loadModule() call looks like this:
if (_url != null && loadRequested)
loadModule();
Assuing url is not null, loadRequested must be false. This seems to imply that you don't have ModuleLoader declared in an mxml file. Is the ModuleLoader created using actionscript? If so you need to call loadModule().
-Darrell -
Errors when using Spark Buttons in dynamically loaded modules loaded by dynamically loaded modules
Ok ... I have to admit this issue is rather special ;-)
I have a flex application that loads a list of modules after the user logs in, depending on the permissions of the user.
One of these modules contains a component, that allows the user to configure settings for different types of objects.
For each object type (can be extended) there exists one module swf.
The strange problem I am having now is that as soon as a Spark Button (or anything derived from one ... CheckBox) inside the settings-module. I get the following error (unfortunately in german ... but I'll try to translate).
This error happens when using a spark CheckBox (Which is derived from Spark Button):
ArgumentError: Error #2004: Einer der Parameter ist ungültig.
at flash.display::Graphics/drawRect()
at mx.graphics::RectangularDropShadow/drawShadow()[E:\dev\4.x\frameworks\projects\framework\ src\mx\graphics\RectangularDropShadow.as:575]
at mx.skins.spark::BorderSkin/updateDisplayList()[E:\dev\4.x\frameworks\projects\sparkskins\ src\mx\skins\spark\BorderSkin.mxml:174]
at mx.core::UIComponent/validateDisplayList()[E:\dev\4.x\frameworks\projects\framework\src\m x\core\UIComponent.as:8709]
at mx.managers::LayoutManager/validateDisplayList()[E:\dev\4.x\frameworks\projects\framework \src\mx\managers\LayoutManager.as:663]
at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.x\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:718]
at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.x\frameworks\projects \framework\src\mx\managers\LayoutManager.as:1072]
When having a look at the problem the cause is that width and height are not set (NaN).
If I use a plain Button I get the same error in "drawRoundRect".
As soon as I change back to a mx-Button/Checkbox, everything is fine.
In my current Case I wanted to use a custom TreeItemRenderer to display a CheckBox in the tree. This tree Item renderer is included in a custom Lib that is used by all modules.
I have one Second Level module using this renderer. I have one Third Level Module thas uses the exact same tree definition. If I use the MX CheckBox I get CheckBoxes in the Second- and Third-Level Module. If I use the Spark-CheckBox I get a CheckBox in my Second Level Module and the above Error in the Third Level Module.
To make everything even stranger: I have a custom component loading my modules and I use this in the Top Level Module to load the Second Level Modules and in my Second Level Module to load my Third Level Modules (So I would guess If my loader is broken, then the Second Level Modules should not work either).
Help is greatly appreciated :-)
Regards,
ChrisOk, I managed to find out what was going wrong and to get my stuff working again. I have to admit that I have no idea why my application / flex was showing this behaviour. The only way I could track this down was by undoing the Subversion checkins one by one. Finding out what was happening using common sense seems to be out of the question with this issue.
My application is built up of a main application swf that loads module swfs and a library swc that contains common stuff and is used in the main application and the modules.
I now had some custom TreeItemRenderers in my modules. The problem was caused by moving a custom TreeItemRenderer from one module to the library-swc. I could successfully reproduce this. If I add only one class extending TreeItemRenderer to my library (I don't even have to use it), the entire flex system goes haywire. As soon as I remove that class, everything is ok. I checked, if there might be a problem with third party libs containing flex core classes which might be used instead of the sdk ones, but after looking at the catalogs of the third party swcs I couldn't find a reference to TreeItemRenderer.
Any Ideas? I sort of dislike the idea of being able to run into such strange problems. Is there a tool that allows me to check for class compatibility issues? -
Loading modules when using enter-pssession
Hello
I see some thing that appears unusual to me.
Server1 is running PowerShell v2
Client1 is running PowerShell v2
If I am logged directly to Server1 and do
$Host
$PSVersionTable
I get the result I would expect e.g. version 2 and PSVersion2. I can also load Modules in the normal way directly from Server1 e.g. Import-Module ...
From Client1 (or any other client) if I Enter-PSSession Server1 then
$Host
$PSVersionTable
I get the following verion 1 and PSVersion 2
So basically even though the PSVersion is 2 the Host (e.g. PS-Session Host) is version 1, and therefore I cannot load Modules as I get the following error if I try
Import-Module : The current PowerShell host is: 'ServerRemoteHost' (version 1.0.0.0). The module
'C:\WINDOWS\system32\WindowsPowerShell\v1.0\Modules\pspki\pspki.psd1' requires a minimum PowerShell ho
st version of '2.0' to execute.
So it occurs to me the "Host" execution environment you get with PS-Session is a cut down version e.g. version 1
Is this normal? is there a work around for it?
Thanks All
AAnotherUser__
AAnotherUser__What is a client system? YOu say "client1" which is some PC that is not a "server class" PC is running PowerShell V2. What does that mean.
At any V2 system prompt this is what V2 displays:
PS C:\scripts> $host
Name : ConsoleHost
Version : 2.0
InstanceId : 5bfce22c-8b10-4c67-8dd7-435ff1c351a7
UI : System.Management.Automation.Internal.Host.InternalHostUserInterface
CurrentCulture : en-US
CurrentUICulture : en-US
PrivateData : Microsoft.PowerShell.ConsoleHost+ConsoleColorProxy
IsRunspacePushed : False
Runspace : System.Management.Automation.Runspaces.LocalRunspace
PS C:\scripts> $psversiontable
Name Value
CLRVersion 2.0.50727.3655
BuildVersion 6.0.6002.18111
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
Host will report Version 2.0 if it doesn;t you are not running V2 you are running V1.
¯\_(ツ)_/¯ -
Menubar load modules for each sub-menu
I am creating an application using the MENUBAR but cannot get a module to open when a sub-menu is clicked. I have stripped my app down to bare bones to eliminate other factors. The menubar has several main options, such as, Button1, Button2, Button3 and then each has a sub-menu dropdown. If Button1 has Button1Sub1 and Button1Sub2 dropdowns I want to have a different module launch when either of the sub-menus are clicked.
I have been successful in using ModuleManager to open a particular module referencing the creationComplete="moduleLoadHandler()" but not by selecting a menu item from the menubar. My application needs to be as user-friendly and Windows-like as possible. There are many different modules which need to be loaded and unloaded.
I have attached a screenshot image of my project tree and circled the ActionModule.swf file to show its location.
I have attached my code below:
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" creationComplete="creationHandler();" >
<mx:Script>
<![CDATA[
import mx.controls.menuClasses.IMenuBarItemRenderer;
import mx.controls.MenuBar;
import mx.controls.menuClasses.MenuBarItem;
import mx.controls.Alert;
import mx.modules.Module;
import mx.events.ModuleEvent;
import mx.modules.ModuleManager;
import mx.modules.IModuleInfo;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
import mx.events.FlexEvent;
import mx.events.MenuEvent;
import mx.collections.*;
public var _moduleInfo:IModuleInfo;
[Bindable]
public var menuBarCollection:XMLListCollection;
private var menubarXML:XMLList =
<>
<menuitem label="Menu1" data="top">
<menuitem label="MenuItem 1-A" data="1A" itemClick="moduleLoadHandler()"/>
<menuitem label="MenuItem 1-B" data="1B"/>
</menuitem>
<menuitem label="Menu2" data="top">
<menuitem label="MenuItem 2-A" type="check" data="2A"/>
<menuitem type="separator"/>
<menuitem label="MenuItem 2-B" >
<menuitem label="SubMenuItem 3-A" type="radio"
groupName="one" data="3A"/>
<menuitem label="SubMenuItem 3-B" type="radio"
groupName="one" data="3B"/>
</menuitem>
</menuitem>
<menuitem label="Menu3" data="top">
<menuitem label="MenuItem 3-A" data="3A"/>
<menuitem label="MenuItem 3-B" data="3B"/>
</menuitem>
<menuitem label="Menu4" data="top">
<menuitem label="MenuItem 4-A" data="4A"/>
<menuitem label="MenuItem 4-B" data="4B"/>
</menuitem>
</>;
private function creationHandler():void{
menuBarCollection = new XMLListCollection(menubarXML);
private function moduleLoadHandler(event:ModuleEvent ):void{
canvas.addChild( _moduleInfo.factory.create() as Module );
_moduleInfo = ModuleManager.getModule('ActionModule.swf');
_moduleInfo.addEventListener(ModuleEvent.READY, moduleLoadHandler);
_moduleInfo.load();
// Event handler for the MenuBar control's itemClick event.
private function menuHandler(event:MenuEvent):void {
// Don't open the Alert for a menu bar item that
// opens a popup submenu.
//if (event.item.@data != "top") {
// Alert.show("Label: " + event.item.@label + "\n" +
// "Data: " + event.item.@data, "Clicked menu item");
private function onTopSelection(event:MenuEvent):void{
var mb:MenuBar=event.target as MenuBar;
var selectedIndex:int=mb.selectedIndex;
for (var i:int=0;i<mb.menuBarItems.length;i++){
if(i==selectedIndex){
(mb.menuBarItems[i] as MenuBarItem).setStyle("fontWeight","bold");
else{
(mb.menuBarItems[i] as MenuBarItem).setStyle("fontWeight","normal");
]]>
</mx:Script>
<mx:Canvas id="canvas" height="75%" width="75%"
paddingTop="10" paddingLeft="10">
<mx:MenuBar labelField="@label" itemClick="menuHandler(event);" dataProvider="{menuBarCollection}" change="onTopSelection(event)" />
</mx:Canvas>
</mx:Application>Hi,
I am also doing the same way, but ended up with some issues.
I have a Main Application with a menu Bar on Top and Rest of the area occupied by a ModuleLoader.
First I set the URL to login module, on successful login I initialize my menu Bar based on User role and load a new module, it contains only a SuperTabNavigator.
On click of an item in my Application Menu, I add a Custom Componenet built on Canvas (Named MyCanMod , this contains a Module loader and a progress bar in it , I have attached the code) as a tab to the tab navigator.
On menu item click, I take the data of my menu item and set that as the URL of my Module Loader inside the Custom canvas. Then it is added as a tab to my tab navigator.
private function openItem(event:MenuEvent):void
var myModule:MyCanMod = new MyCanMod(); tabNav.addChild(myModule);
tabNav.selectedChild = myModule;
myModule.label = event.item.@label;
myModule.icon = document_icon;
myModule.urlParam = event.item.@module;
urlParam is a bined to the module Loader url in my Custom componenet.
All works fine. I am not unloading any modules and all the module loader are set to current domain.
When the user logs out and logs back with out refreshing the browser I get Type Error or some time null Object error and it is random. If I refresh the browser and login back, every thing is fine.
I do have reference for IDragManager,HistoryManager,PopUpManager,RemoteObject in main application.
I am not concerned about unloading modules now, but then on Tab close event I unloaded the module, and that did not solve the problem.
I get an error like
TypeError: Error #1034: Type Coercion failed: cannot convert flexlib.controls::PromptingTextInput@6152a851 to flexlib.controls.PromptingTextInput.
at mx.core::UIComponent/createReferenceOnParentDocument()
at mx.core::Container/createComponentFromDescriptor()
at mx.core::Container/createComponentsFromDescriptors()
at mx.core::Container/createChildren()
at mx.core::UIComponent/initialize()
at mx.core::Container/initialize()
at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
at mx.core::Container/http://www.adobe.com/2006/flex/mx/internal::childAdded()
at mx.core::Container/addChildAt()
at mx.core::Container/addChild()
Any help is appreciated; I am really struck with it, please help. -
ModuleViewLoader - does it load modules into child application domains by default ?
Is the Cairngorm 3, "ModuleViewLoader" loading modules into child application domains by default, or we have to do it our self like this:
public function init():void{
var childDomain:ApplicationDomain = new ApplicationDomain(ApplicationDomain.currentDomain);
modelLoader.applicationDomain = childDomain;
<module:ModuleViewLoader id="moduleLoader"
moduleId="{ moduleId }"
moduleManager="{ moduleManager }"
skinClass="com.adobe.cairngorm.module.ModuleViewLoaderSkin"
visible="{this.visible}"
width="100%" height="100%">
<module:loadPolicy>
<module:BasicLoadPolicy/>
</module:loadPolicy>
</module:ModuleViewLoader>
I think it's important to know regarding unloading the modules.
Thanks,Hi Adrian,
We are following the behaviour of the Flex ModuleManager:
We use the applicationDomain provided by the user when available
Otherwise we create a sub applicationDomain from the current domain.
Here is an extract of the ParsleyModuleInfoProxy
private function createDefaultApplicationDomain(applicationDomain:ApplicationDomain):ApplicationDomain
// If an applicationDomain has not been specified and we have a module factory,
// then create a child application domain from the application domain
// this module factory is in.
// This is a change in behavior so only do it for Flex 4 and newer
// applications.
var tempApplicationDomain:ApplicationDomain = applicationDomain;
if (tempApplicationDomain == null && moduleFactory)
var currentDomain:ApplicationDomain = moduleFactory.info()["currentDomain"];
tempApplicationDomain = new ApplicationDomain(currentDomain);
return tempApplicationDomain;
We will update the documentation to highlight the fact that a sub ApplicationDomain is created by default.
Thanks. -
Missing READY Event by using ModuleManager!
Hello,
i have some problems by using mx.modules.ModuleManager.getModule().
In 3 of about 100 test, the READY and ERROR event is not dispatch. So I can not even react on it
I use the current SDK Version: 4.1.0.16076
Is this a bug or am I doing something wrong?
public static function loadModule(url:String,callback:Function):void {
trace('[MOD] Loading: ' + url)
var info:IModuleInfo = mx.modules.ModuleManager.getModule(url);
info.addEventListener(ModuleEvent.READY,function():void{
trace('[MOD] Finished: ' + url);
callback(info.factory.create());
info.addEventListener(ModuleEvent.ERROR,function(event:ModuleEvent):void{
trace('[MOD] Error: ' + event.toString());
info.addEventListener(ModuleEvent.PROGRESS,function(event:ProgressEvent):void {
trace('[MOD] Progress:',event.bytesLoaded, event.bytesTotal);
info.load();It is possible that this may be a bug. Are you loading multiple modules at the same time? Just loading the same module 100 times?
When you fail to get a READY or ERROR event do you get any PROGRESS events?
When you fail to get a READY or ERROR event try getting the module again (ModuleManager.getModule(url)) and check the values of "data", "error", "factory", "loaded", "ready", and "setup".
The factory property, if available, should be of type FlexModuleFactory. If you see this field in the debugger then check to see what the value of its private "state" variable is.
-Darrell -
hi
i have a menubar with these menuitems build from an xml , in
that xml i have a field wich indicates what to do when that item is
choosed and that is, loading a module. Now, i'm using module
manager to load my modules using an event listener to know when
it's ready , when i call the ready handler i create an instance of
a display object and add it to the stage, all is fine, following an
example from adobe, but my question how can i load modules
dynamically using the ModuleManager ?
thanksfrom the help:
<?xml version="1.0"?>
<!-- modules/ModuleLoaderApp.mxml -->
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="initApp()">
<mx:Script>
<![CDATA[
import mx.events.ModuleEvent;
import mx.modules.ModuleManager;
import mx.modules.IModuleInfo;
public var info:IModuleInfo;
private function initApp():void {
info = ModuleManager.getModule("ColumnChartModule.swf");
info.addEventListener(ModuleEvent.READY, modEventHandler);
// Load the module into memory. Calling load() makes the
// IFlexModuleFactory available. You can then get an
// instance of the class using the factory's create()
// method.
info.load();
private function modEventHandler(e:ModuleEvent):void {
// Add an instance of the module's class to the
// display list.
vb1.addChild(info.factory.create() as ColumnChartModule);
]]>
</mx:Script>
<mx:VBox id="vb1"/>
</mx:Application> -
Loaded Module as an Itemrenderer??
I have split up my application into modules that load at runtime as required. Great, but I need also an Itemrenderer for a Tilelist to be dynamically loaded.
It is just a simple canvas, but there are many design options so I have made a lot of different modules to be used as itemrenderers. The selected one depends on preferences loaded at runtime.
- To load other Modules I use ModuleManager.getModule() and when loaded I use them as DisplayObject.
- For dynamic Itemrenderers at runtime I use tilelist.itemRenderer = new ClassFactory(module)
But I cant "link" or "convert" between DisplayObject and ClassFactory.
I am really on a weekend hurry because I thought about this as a simple thing, but I cant make it work. Any help will be appreciated.
Thanks!What code is giving that error?
-
[bumblebee] Failed to load module "nouveau" (module does not exist, 0)
Hello my friends,
bumblebee does not work for me. I installed bumblebee, nvidia, nvidia-utils, mesa-libgl, bbswitch-dkms ...
# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation 3rd Gen Core Processor Thermal Subsystem (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 7 Series/C210 Series Chipset Family Thermal Management Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24)
nVidia 620M at PCIBus 01.00.0
First, nvidia is disabled by bbswitch.
# cat /proc/acpi/bbswitch
0000:01:00.0 OFF
Then I execute the command
# optirun -vv glxspheres
[ 505.314018] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 505.315297] [DEBUG]optirun version 3.2.1 starting...
[ 505.315938] [DEBUG]Active configuration:
[ 505.316203] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 505.316421] [DEBUG] X display: :8
[ 505.316552] [DEBUG] LD_LIBRARY_PATH:
[ 505.316674] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 505.316788] [DEBUG] Accel/display bridge: auto
[ 505.316900] [DEBUG] VGL Compression: proxy
[ 505.317014] [DEBUG] VGLrun extra options:
[ 505.317126] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 505.317295] [DEBUG]Using auto-detected bridge virtualgl
[ 506.597122] [INFO]Response: No - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597316] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597448] [DEBUG]Socket closed.
[ 506.597538] [ERROR]Aborting because fallback start is disabled.
[ 506.597654] [DEBUG]Killing all remaining processes.
Now, the nvidia is enabled.
# cat /proc/acpi/bbswitch
0000:01:00.0 ON
# modprobe nvidia
modprobe: FATAL: Module nvidia not found.
/etc/bumblebee/bumblebee.config
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
What is wrong? Thanks so much for help!Just did a downgrade and it's working again, here are my versions.
linux 3.9.9-1
linux-headers 3.9.9-1
nvidia 319.32-2
nvidia-utils 319.32-1
bbswitch 0.7-4
If you have conflicts, I found it easiest to remove those (bbswitch, virtualbox in my case), downgrade linux and then install the appropriate bbs/vb packages -
Could not load Module... A known bug in Logic Pro 7.3 with Snow Leopard?
I know this issue has been discussed before, but on my brand new MacBook Pro it's still an issue, so can someone please help me out with this?
Here goes:
Loading Logic 7.2.3 in Snow Leopard:
The previously selected audio interface is not available
The built-in audio inputs and outputs of the computer will be used instead for this session.
<ok>
Could not load Module "FW-1884" (-43)
<cancel>
Could not load Module "HUI" (-43)
<cancel>
Could not load Module "Logic Control" (-43)
<cancel>
Could not load Module "TranzPort" (-43)
<cancel>
Logic loads, and everything seems to work just fine.
<selecting a plugin ---> Bass Amp>
CoreAudio:
Resource not found. (-10109)
This happens no matter which plugin I choose - Bass Amp, EXS 24, ES1 etc…
<Continue>
The plugin loads, and works, but the display is in "Controls" Mode. Trying to switch to "Editor" Mode resulsts in the same error as above.
Is there anyone out there who knows why this happens?
Thanks
WarblerGiven that so many things are funky, I'd suspect that one or both of the following is occurring:
1) Your Logic Pro application/installation is corrupt. Logic is failing loading control surface modules which should be in the application bundle. Reinstall.
2) You have an incompatibility between Logic and the necessary system frameworks because Logic is too old/your system/OS is too new. You can't expect to hold back on an old version of an application and press forward with the OS (or vice versa) forever - eventually, something will break, and you'll have a large leap to get things working again.
It's probably better to stay on the update train unless there is a specific reason to get off, or at least, freeze your computer/OS version at the same tim as you freeze your application. -
Loading Modules and Mounting Local Filesystems failed during boot
Hi all,
since 2-3 weeks I've had some FAIL during the boot (after having upgraded the system, I remember that there was involved an upgrade of init script probably, or something connected with the booting process).
[gianluca@gianluca-laptop ~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ba60000 (usable)
[ 0.000000] BIOS-e820: 000000007ba60000 - 000000007babf000 (reserved)
[ 0.000000] BIOS-e820: 000000007babf000 - 000000007bb80000 (usable)
[ 0.000000] BIOS-e820: 000000007bb80000 - 000000007bbbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bbbf000 - 000000007bbe2000 (usable)
[ 0.000000] BIOS-e820: 000000007bbe2000 - 000000007bbf7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
[ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Acer Aspire 1810TZ/JM11-MS, BIOS v1.3314 08/31/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7b8a0000 - 7ba50000
[ 0.000000] Allocated new RAMDISK: 3764e000 - 377fdbda
[ 0.000000] Move RAMDISK from 000000007b8a0000 - 000000007ba4fbd9 to 3764e000 - 377fdbd9
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 7bbf6120 0006C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 7bbf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 7bbe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 7bb8d000 00040
[ 0.000000] ACPI: DMAR 7bbf5000 00068 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: HPET 7bbf3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 7bbf2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 7bbf1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! 7bbf0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 7bbe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 7bbe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 7bbe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1092MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007bc00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ba60
[ 0.000000] 0: 0x0007babf -> 0x0007bb80
[ 0.000000] 0: 0x0007bbbf -> 0x0007bbe2
[ 0.000000] 0: 0x0007bbf7 -> 0x0007bc00
[ 0.000000] On node 0 totalpages: 506587
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f66d5200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2185 pages used for memmap
[ 0.000000] HighMem zone: 277190 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502626
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/2bef0cce-027d-44fa-a086-056c390cd847 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 8109824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x98/0xb0()
[ 0.000000] Hardware name: Aspire 1810TZ
[ 0.000000] Your BIOS is broken; DMAR reported at address 0!
[ 0.000000] BIOS vendor: INSYDE; Ver: v1.3314; Product Version: v1.3314
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.39-ARCH #1
[ 0.000000] Call Trace:
[ 0.000000] [<c1046112>] warn_slowpath_common+0x72/0xa0
[ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
[ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
[ 0.000000] [<c10461a2>] warn_slowpath_fmt_taint+0x32/0x40
[ 0.000000] [<c11e3dd8>] warn_invalid_dmar+0x98/0xb0
[ 0.000000] [<c14cba32>] check_zero_address+0x57/0x12b
[ 0.000000] [<c12250cd>] ? acpi_get_table_with_size+0x59/0xb3
[ 0.000000] [<c14cbb18>] detect_intel_iommu+0x12/0x78
[ 0.000000] [<c14ad67e>] pci_iommu_alloc+0x35/0x5a
[ 0.000000] [<c14b92c3>] mem_init+0xe/0x26d
[ 0.000000] [<c14c3396>] ? __alloc_bootmem_node_nopanic+0x72/0x98
[ 0.000000] [<c1342afc>] ? printk+0x1d/0x1f
[ 0.000000] [<c14c5183>] ? page_cgroup_init_flatmem+0x8f/0xbc
[ 0.000000] [<c14a85cc>] start_kernel+0x1a0/0x357
[ 0.000000] [<c14a81bd>] ? loglevel+0x18/0x18
[ 0.000000] [<c14a80b3>] i386_start_kernel+0xb3/0xb9
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] Disabling lock debugging due to kernel taint
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bc00)
[ 0.000000] Memory: 1993572k/2027520k available (3376k kernel code, 32776k reserved, 1390k data, 512k init, 1117500k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1296.656 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.36 BogoMIPS (lpj=4322186)
[ 0.003344] pid_max: default: 32768 minimum: 301
[ 0.003415] Security Framework initialized
[ 0.003422] AppArmor: AppArmor disabled by boot time parameter
[ 0.003458] Mount-cache hash table entries: 512
[ 0.003763] Initializing cgroup subsys ns
[ 0.003768] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.003772] Initializing cgroup subsys cpuacct
[ 0.003793] Initializing cgroup subsys memory
[ 0.003809] Initializing cgroup subsys devices
[ 0.003813] Initializing cgroup subsys freezer
[ 0.003816] Initializing cgroup subsys net_cls
[ 0.003819] Initializing cgroup subsys blkio
[ 0.003876] CPU: Physical Processor ID: 0
[ 0.003879] CPU: Processor Core ID: 0
[ 0.003883] mce: CPU supports 6 MCE banks
[ 0.003894] CPU0: Thermal monitoring enabled (TM2)
[ 0.003899] using mwait in idle threads.
[ 0.005672] ACPI: Core revision 20110316
[ 0.016682] ftrace: allocating 15225 entries in 30 pages
[ 0.020059] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056606] CPU0: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a
[ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073511] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100013] CPU 1 irqstacks, hard=f54f6000 soft=f54f8000
[ 0.100017] Booting Node 0, Processors #1
[ 0.100021] smpboot cpu 1: start_ip = 9a000
[ 0.006666] Initializing CPU#1
[ 0.196688] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203327] Brought up 2 CPUs
[ 0.203331] Total of 2 processors activated (5188.93 BogoMIPS).
[ 0.204780] devtmpfs: initialized
[ 0.204780] PM: Registering ACPI NVS region at 7bb80000 (258048 bytes)
[ 0.206812] print_constraints: dummy:
[ 0.206898] NET: Registered protocol family 16
[ 0.207056] ACPI: bus type pci registered
[ 0.207200] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.207205] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.207209] PCI: Using MMCONFIG for extended config space
[ 0.207212] PCI: Using configuration type 1 for base access
[ 0.207951] bio: create slab <bio-0> at 0
[ 0.211250] ACPI: EC: Look up EC in DSDT
[ 0.214102] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.217442] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.218088] ACPI: SSDT 7ba6fc98 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.218783] ACPI: Dynamic OEM Table Load:
[ 0.218788] ACPI: SSDT (null) 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.219036] ACPI: SSDT 7ba6d598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.219702] ACPI: Dynamic OEM Table Load:
[ 0.219706] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.237115] ACPI: SSDT 7ba6ee18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.237838] ACPI: Dynamic OEM Table Load:
[ 0.237843] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.246829] ACPI: SSDT 7ba6ff18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.247515] ACPI: Dynamic OEM Table Load:
[ 0.247520] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.257074] ACPI: Interpreter enabled
[ 0.257081] ACPI: (supports S0 S3 S4 S5)
[ 0.257124] ACPI: Using IOAPIC for interrupt routing
[ 0.265711] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.265982] ACPI: No dock devices found.
[ 0.265985] HEST: Table not found.
[ 0.265991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.266509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.267544] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.267549] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.267553] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.267560] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.267579] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.267613] DMAR: Forcing write-buffer flush capability
[ 0.267616] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.267647] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.267668] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[ 0.267681] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.267691] pci 0000:00:02.0: reg 20: [io 0x30d0-0x30d7]
[ 0.267738] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.267756] pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
[ 0.267863] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.267945] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
[ 0.268041] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.272125] pci 0000:00:1a.7: reg 10: [mem 0x94504c00-0x94504fff]
[ 0.296690] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.296698] pci 0000:00:1a.7: PME# disabled
[ 0.296734] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.296759] pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
[ 0.296845] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.296852] pci 0000:00:1b.0: PME# disabled
[ 0.296883] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.296968] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.296974] pci 0000:00:1c.0: PME# disabled
[ 0.297011] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.297098] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.297105] pci 0000:00:1c.3: PME# disabled
[ 0.297148] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.297230] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
[ 0.297313] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.297391] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
[ 0.297471] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.297552] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
[ 0.297646] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.302125] pci 0000:00:1d.7: reg 10: [mem 0x94504800-0x94504bff]
[ 0.328820] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.328828] pci 0000:00:1d.7: PME# disabled
[ 0.328858] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.328949] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.329112] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.329145] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf]
[ 0.329159] pci 0000:00:1f.2: reg 14: [io 0x30dc-0x30df]
[ 0.329172] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7]
[ 0.329185] pci 0000:00:1f.2: reg 1c: [io 0x30d8-0x30db]
[ 0.329199] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
[ 0.329212] pci 0000:00:1f.2: reg 24: [mem 0x94504000-0x945047ff]
[ 0.329268] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.329274] pci 0000:00:1f.2: PME# disabled
[ 0.329302] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.329328] pci 0000:00:1f.3: reg 10: [mem 0x94505000-0x945050ff 64bit]
[ 0.329362] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.329486] pci 0000:01:00.0: [1969:1063] type 0 class 0x000200
[ 0.329519] pci 0000:01:00.0: reg 10: [mem 0x93500000-0x9353ffff 64bit]
[ 0.329537] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f]
[ 0.329645] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.329653] pci 0000:01:00.0: PME# disabled
[ 0.333336] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.333343] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.333349] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.333360] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.333454] pci 0000:02:00.0: [8086:0083] type 0 class 0x000280
[ 0.333498] pci 0000:02:00.0: reg 10: [mem 0x92500000-0x92501fff 64bit]
[ 0.333662] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.333671] pci 0000:02:00.0: PME# disabled
[ 0.340004] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.340011] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.340018] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
[ 0.340028] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.340121] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.340128] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.340135] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.340145] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.340150] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.340154] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.340158] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.340163] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.340186] pci_bus 0000:00: on NUMA node 0
[ 0.340192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.340631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.340734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.340832] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.340835] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.348405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.348504] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.348599] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.348693] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.348788] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.348886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.348981] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.349075] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.349214] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.349232] vgaarb: loaded
[ 0.349386] PCI: Using ACPI for IRQ routing
[ 0.349389] PCI: pci_cache_line_size set to 64 bytes
[ 0.349500] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.349504] reserve RAM buffer: 000000007ba60000 - 000000007bffffff
[ 0.349510] reserve RAM buffer: 000000007bb80000 - 000000007bffffff
[ 0.349514] reserve RAM buffer: 000000007bbe2000 - 000000007bffffff
[ 0.349518] reserve RAM buffer: 000000007bc00000 - 000000007bffffff
[ 0.349695] NetLabel: Initializing
[ 0.349698] NetLabel: domain hash size = 128
[ 0.349700] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.349720] NetLabel: unlabeled traffic allowed by default
[ 0.349740] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.349748] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.349756] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.359999] Switching to clocksource hpet
[ 0.363178] Switched to NOHz mode on CPU #0
[ 0.363276] Switched to NOHz mode on CPU #1
[ 0.370116] pnp: PnP ACPI init
[ 0.370143] ACPI: bus type pnp registered
[ 0.370722] pnp 00:00: [bus 00-ff]
[ 0.370727] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.370731] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.370735] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.370739] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.370743] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.370747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.370751] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.370755] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.370759] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.370763] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.370767] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.370770] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.370774] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.370778] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.370782] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.370786] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.370790] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.370794] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.370798] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.370911] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.371140] pnp 00:01: [io 0x002e-0x002f]
[ 0.371144] pnp 00:01: [io 0x004e-0x004f]
[ 0.371148] pnp 00:01: [io 0x164e-0x164f]
[ 0.371151] pnp 00:01: [io 0x0061]
[ 0.371154] pnp 00:01: [io 0x0070]
[ 0.371157] pnp 00:01: [io 0x0080]
[ 0.371160] pnp 00:01: [io 0x0092]
[ 0.371163] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.371167] pnp 00:01: [io 0x0063]
[ 0.371170] pnp 00:01: [io 0x0065]
[ 0.371173] pnp 00:01: [io 0x0067]
[ 0.371176] pnp 00:01: [io 0x0600-0x060f]
[ 0.371180] pnp 00:01: [io 0x0610]
[ 0.371183] pnp 00:01: [io 0x0800-0x080f]
[ 0.371186] pnp 00:01: [io 0x0810-0x0817]
[ 0.371190] pnp 00:01: [io 0x0820-0x0823]
[ 0.371193] pnp 00:01: [io 0x0400-0x047f]
[ 0.371196] pnp 00:01: [io 0x0500-0x053f]
[ 0.371200] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.371203] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.371211] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.371215] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.371218] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.371222] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.371225] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.371229] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.371232] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.371236] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.371273] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
[ 0.371372] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.371377] system 00:01: [io 0x0610] has been reserved
[ 0.371381] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.371386] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.371390] system 00:01: [io 0x0820-0x0823] has been reserved
[ 0.371394] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.371399] system 00:01: [io 0x0500-0x053f] has been reserved
[ 0.371405] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.371410] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.371414] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.371419] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.371424] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.371429] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.371434] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.371438] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.371443] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.371448] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.371453] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.371471] pnp 00:02: [io 0x0000-0x001f]
[ 0.371474] pnp 00:02: [io 0x0081-0x0091]
[ 0.371478] pnp 00:02: [io 0x0093-0x009f]
[ 0.371481] pnp 00:02: [io 0x00c0-0x00df]
[ 0.371485] pnp 00:02: [dma 4]
[ 0.371537] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.371576] pnp 00:03: [io 0x0070-0x0077]
[ 0.371630] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.371735] pnp 00:04: [irq 0 disabled]
[ 0.371750] pnp 00:04: [irq 8]
[ 0.371753] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.371809] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.371828] pnp 00:05: [io 0x00f0]
[ 0.371835] pnp 00:05: [irq 13]
[ 0.371889] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.371907] pnp 00:06: [mem 0xff800000-0xffffffff]
[ 0.371965] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.371991] pnp 00:07: [io 0x0060]
[ 0.371995] pnp 00:07: [io 0x0064]
[ 0.372003] pnp 00:07: [irq 1]
[ 0.372061] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.372090] pnp 00:08: [irq 12]
[ 0.372150] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 PNP0f13 (active)
[ 0.372300] pnp: PnP ACPI: found 9 devices
[ 0.372303] ACPI: ACPI bus type pnp unregistered
[ 0.409749] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.409755] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.409764] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.409772] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.409782] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.409787] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.409795] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
[ 0.409802] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.409812] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.409815] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.409823] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.409829] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.409853] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.409861] pci 0000:00:1c.0: setting latency timer to 64
[ 0.409875] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.409881] pci 0000:00:1c.3: setting latency timer to 64
[ 0.409891] pci 0000:00:1e.0: setting latency timer to 64
[ 0.409897] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.409901] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.409905] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.409909] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.409914] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.409918] pci_bus 0000:01: resource 1 [mem 0x93500000-0x944fffff]
[ 0.409922] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[ 0.409927] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.409931] pci_bus 0000:02: resource 1 [mem 0x92500000-0x934fffff]
[ 0.409935] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[ 0.409940] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.409943] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.409947] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.409952] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.410023] NET: Registered protocol family 2
[ 0.410132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.410465] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.411087] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.411362] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.411366] TCP reno registered
[ 0.411370] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.411381] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.411559] NET: Registered protocol family 1
[ 0.411580] pci 0000:00:02.0: Boot video device
[ 0.440052] PCI: CLS 64 bytes, default 64
[ 0.440120] Unpacking initramfs...
[ 0.493687] Freeing initrd memory: 1728k freed
[ 0.494435] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.494439] Simple Boot Flag at 0x44 set to 0x1
[ 0.494754] apm: BIOS not found.
[ 0.494943] audit: initializing netlink socket (disabled)
[ 0.494958] type=2000 audit(1312551622.493:1): initialized
[ 0.495391] highmem bounce pool size: 64 pages
[ 0.495398] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.498715] VFS: Disk quotas dquot_6.5.2
[ 0.498846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.499018] msgmni has been set to 1714
[ 0.499314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.499357] io scheduler noop registered
[ 0.499361] io scheduler deadline registered
[ 0.499380] io scheduler cfq registered (default)
[ 0.499553] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.499624] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.499729] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.499792] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
[ 0.500070] intel_idle: MWAIT substates: 0x22220
[ 0.500074] intel_idle: does not run on family 6 model 23
[ 0.500082] ERST: Table is not found!
[ 0.500103] isapnp: Scanning for PnP cards...
[ 0.857044] isapnp: No Plug & Play device found
[ 0.857122] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.060716] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.068400] i8042: Detected active multiplexing controller, rev 1.1
[ 1.071789] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.071804] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.071809] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.071813] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.071818] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.072099] mousedev: PS/2 mouse device common for all mice
[ 1.072185] rtc_cmos 00:03: RTC can wake from S4
[ 1.086817] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.086852] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.086887] cpuidle: using governor ladder
[ 1.086890] cpuidle: using governor menu
[ 1.087261] TCP cubic registered
[ 1.087265] NET: Registered protocol family 17
[ 1.087276] Registering the dns_resolver key type
[ 1.087307] Using IPI No-Shortcut mode
[ 1.087437] PM: Hibernation image not present or could not be loaded.
[ 1.087445] registered taskstats version 1
[ 1.087957] rtc_cmos 00:03: setting system clock to 2011-08-05 13:40:23 UTC (1312551623)
[ 1.088039] Initializing network drop monitor service
[ 1.088128] Freeing unused kernel memory: 512k freed
[ 1.088469] Write protecting the kernel text: 3380k
[ 1.088507] Write protecting the kernel read-only data: 1028k
[ 1.093885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.106227] udevd[54]: starting version 171
[ 1.236052] SCSI subsystem initialized
[ 1.269724] libata version 3.00 loaded.
[ 1.282619] ahci 0000:00:1f.2: version 3.0
[ 1.282637] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.282703] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.282767] ahci: SSS flag set, parallel bus scan disabled
[ 1.282814] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.282820] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led pmp pio slum part ccc ems
[ 1.282828] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.301035] scsi0 : ahci
[ 1.301194] scsi1 : ahci
[ 1.301318] scsi2 : ahci
[ 1.301438] scsi3 : ahci
[ 1.301557] scsi4 : ahci
[ 1.301679] scsi5 : ahci
[ 1.301772] ata1: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504100 irq 42
[ 1.301778] ata2: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504180 irq 42
[ 1.301782] ata3: DUMMY
[ 1.301784] ata4: DUMMY
[ 1.301788] ata5: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504300 irq 42
[ 1.301793] ata6: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504380 irq 42
[ 1.496710] Refined TSC clocksource calibration: 1296.749 MHz.
[ 1.496717] Switching to clocksource tsc
[ 1.786699] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.787736] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
[ 1.787741] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.788946] ata1.00: configured for UDMA/133
[ 1.789123] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[ 2.106690] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.426689] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.746690] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.760584] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.760671] sd 0:0:0:0: [sda] Write Protect is off
[ 2.760676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.760709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.798506] sda: sda1 sda2 sda3 sda4
[ 2.799028] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.310879] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.653828] udevd[228]: starting version 173
[ 4.958869] ACPI: acpi_idle registered with cpuidle
[ 4.959125] Monitor-Mwait will be used to enter C-1 state
[ 4.959159] Monitor-Mwait will be used to enter C-2 state
[ 4.959167] Marking TSC unstable due to TSC halts in idle
[ 4.959208] Switching to clocksource hpet
[ 5.052561] fuse init (API version 7.16)
[ 5.094399] acerhdf: Acer Aspire One Fan driver, v.0.5.24
[ 5.094431] acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1810TZ/v1.3314, please report, aborting!
[ 5.377790] Linux agpgart interface v0.103
[ 5.381930] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.382452] ACPI: AC Adapter [ACAD] (off-line)
[ 5.389644] wmi: Mapper loaded
[ 5.390172] iTCO_vendor_support: vendor-support=0
[ 5.532413] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.532424] ACPI: Power Button [PWRB]
[ 5.532507] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 5.548014] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 5.550648] acer_wmi: Brightness must be controlled by generic video driver
[ 5.554953] ACPI: Lid Switch [LID0]
[ 5.555062] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 5.555072] ACPI: Sleep Button [SLPB]
[ 5.555166] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.555173] ACPI: Power Button [PWRF]
[ 5.560994] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.569140] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.569153] ACPI: Battery Slot [BAT1] (battery present)
[ 5.570951] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 5.573564] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 5.573653] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.602755] usbcore: registered new interface driver usbfs
[ 5.602793] usbcore: registered new interface driver hub
[ 5.606733] usbcore: registered new device driver usb
[ 5.623405] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.659329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.659373] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 5.659401] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.659407] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.659455] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.670065] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.673944] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 5.673971] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94504c00
[ 5.690924] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.691336] hub 1-0:1.0: USB hub found
[ 5.691345] hub 1-0:1.0: 2 ports detected
[ 5.691477] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.691508] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.691514] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.691528] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.702271] cfg80211: Calling CRDA to update world regulatory domain
[ 5.706752] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.710655] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5.710683] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94504800
[ 5.723379] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.723603] hub 2-0:1.0: USB hub found
[ 5.723610] hub 2-0:1.0: 6 ports detected
[ 5.724256] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 5.724463] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 5.725927] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 5.726502] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 5.802604] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.802687] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.802702] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.802709] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.802732] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.813675] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
[ 5.814571] hub 3-0:1.0: USB hub found
[ 5.814580] hub 3-0:1.0: 2 ports detected
[ 5.814712] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.814725] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.814730] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.814748] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 5.823482] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 5.824221] hub 4-0:1.0: USB hub found
[ 5.824230] hub 4-0:1.0: 2 ports detected
[ 5.824360] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.824373] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.824378] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.824392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 5.836745] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 5.836988] hub 5-0:1.0: USB hub found
[ 5.836995] hub 5-0:1.0: 2 ports detected
[ 5.837118] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 5.837130] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.837135] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.837148] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 5.846757] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040
[ 5.846997] hub 6-0:1.0: USB hub found
[ 5.847004] hub 6-0:1.0: 2 ports detected
[ 5.869833] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.909784] [drm] Initialized drm 1.1.0 20060810
[ 5.926221] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.926238] atl1c 0000:01:00.0: setting latency timer to 64
[ 6.014499] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 6.022590] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.022599] i915 0000:00:02.0: setting latency timer to 64
[ 6.033370] usb 2-5: new high speed USB device number 2 using ehci_hcd
[ 6.045183] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 6.045188] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 6.045269] iwlagn 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.045281] iwlagn 0000:02:00.0: setting latency timer to 64
[ 6.045314] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 6.066230] iwlagn 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
[ 6.066236] iwlagn 0000:02:00.0: Device SKU: 0X9
[ 6.066240] iwlagn 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[ 6.066261] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 6.066513] iwlagn 0000:02:00.0: irq 43 for MSI/MSI-X
[ 6.071614] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 6.071623] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.071626] [drm] Driver supports precise vblank timestamp query.
[ 6.167372] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.236519] iwlagn 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138
[ 6.236889] Registered led device: phy0-led
[ 6.309104] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.435863] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 6.480908] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
[ 6.507822] Linux media interface: v0.10
[ 6.580021] Linux video capture interface: v2.00
[ 6.591629] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
[ 6.608274] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
[ 6.608368] usbcore: registered new interface driver uvcvideo
[ 6.608371] USB Video Class driver (v1.0.0)
[ 6.624890] fbcon: inteldrmfb (fb0) is primary device
[ 6.671041] Console: switching to colour frame buffer device 170x48
[ 6.678170] fb0: inteldrmfb frame buffer device
[ 6.678173] drm: registered panic notifier
[ 6.679734] acpi device:03: registered as cooling_device2
[ 6.679988] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.680104] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 6.680793] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.680840] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.680937] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.680975] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.802470] hda_codec: ALC269: BIOS auto-probing.
[ 6.803832] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 6.833736] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.833855] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.406870] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.676079] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.886041] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
[ 12.277210] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 12.600410] /dev/vmmon[897]: Module vmmon: registered with major=10 minor=165
[ 12.600421] /dev/vmmon[897]: Module vmmon: initialized
[ 12.646908] /dev/vmci[905]: VMCI: Driver initialized.
[ 12.647204] /dev/vmci[905]: Module vmci: registered with major=10 minor=58
[ 12.647209] /dev/vmci[905]: Module vmci: initialized
[ 12.827251] ppdev: user-space parallel port driver
[ 13.786476] /dev/vmnet: open called by PID 979 (vmnet-dhcpd)
[ 13.786488] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 13.786521] /dev/vmnet: port on hub 1 successfully opened
[ 13.801438] /dev/vmnet: open called by PID 981 (vmnet-netifup)
[ 13.801452] /dev/vmnet: port on hub 1 successfully opened
[ 13.854670] /dev/vmnet: open called by PID 983 (vmnet-dhcpd)
[ 13.854683] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 13.854720] /dev/vmnet: port on hub 8 successfully opened
[ 13.915864] /dev/vmnet: open called by PID 987 (vmnet-natd)
[ 13.915881] /dev/vmnet: port on hub 8 successfully opened
[ 13.936302] /dev/vmnet: open called by PID 988 (vmnet-netifup)
[ 13.936317] /dev/vmnet: port on hub 8 successfully opened
[ 38.702663] NET: Registered protocol family 10
[ 38.704338] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.704788] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.752832] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 40.413933] EXT4-fs (sda4): re-mounted. Opts: commit=600
[ 48.976756] vmnet8: no IPv6 routers present
[ 49.523376] vmnet1: no IPv6 routers present
[ 105.125369] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
[ 105.127031] wlan0: authenticated
[ 105.137382] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
[ 105.140390] wlan0: RX AssocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
[ 105.140396] wlan0: associated
[ 105.144018] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 105.447100] /dev/vmnet: open called by PID 971 (vmnet-bridge)
[ 105.447115] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 105.447150] /dev/vmnet: port on hub 0 successfully opened
[ 105.447175] bridge-wlan0: device is wireless, enabling SMAC
[ 105.447181] bridge-wlan0: up
[ 105.448675] bridge-wlan0: attached
[ 107.324643] wlan0: deauthenticating from 00:15:e9:27:b5:38 by local choice (reason=3)
[ 107.400201] cfg80211: Calling CRDA to update world regulatory domain
[ 107.423712] bridge-wlan0: disabling the bridge
[ 107.440034] bridge-wlan0: down
[ 107.440043] bridge-wlan0: detached
[ 107.440111] /dev/vmnet: open called by PID 971 (vmnet-bridge)
[ 107.440124] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 107.440157] /dev/vmnet: port on hub 0 successfully opened
[ 107.440172] bridge-wlan0: device is wireless, enabling SMAC
[ 107.440177] bridge-wlan0: up
[ 107.440182] bridge-wlan0: attached
[ 107.860411] bridge-wlan0: disabling the bridge
[ 107.869871] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
[ 107.872071] wlan0: authenticated
[ 107.872466] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
[ 107.875411] wlan0: RX ReassocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
[ 107.875417] wlan0: associated
[ 107.876696] bridge-wlan0: down
[ 107.876705] bridge-wlan0: detached
[ 107.904358] /dev/vmnet: open called by PID 971 (vmnet-bridge)
[ 107.904374] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 107.904409] /dev/vmnet: port on hub 0 successfully opened
[ 107.904423] bridge-wlan0: device is wireless, enabling SMAC
[ 107.904428] bridge-wlan0: up
[ 107.905917] bridge-wlan0: attached
[ 118.910106] wlan0: no IPv6 routers present
This is the output of /var/log/boot
Fri Aug 5 15:40:30 2011: :: Adjusting system time and setting kernel timezone ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Starting UDev Daemon ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Triggering UDev uevents ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Loading Modules ^[[71G [BUSY] ^[[71G [FAIL]
Fri Aug 5 15:40:30 2011: :: Waiting for UDev uevents to be processed ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190178/480496 files, 1530694/1921775 blocks
Fri Aug 5 15:40:30 2011: /dev/sda4: clean, 49123/14761984 files, 38814365/59034858 blocks
Fri Aug 5 15:40:30 2011: /dev/sda1: clean, 30/26104 files, 19115/104388 blocks
Fri Aug 5 15:40:30 2011: ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
Fri Aug 5 15:40:31 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: INIT: Entering runlevel: 5
Fri Aug 5 15:40:32 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:33 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:33 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:33 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:34 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:34 2011: :: Restoring ALSA Levels ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:34 2011: Starting VMware services:
Fri Aug 5 15:40:34 2011: VMware USB Arbitrator^[[71G done
Fri Aug 5 15:40:34 2011: Virtual machine monitor^[[71G done
Fri Aug 5 15:40:35 2011: Virtual machine communication interface^[[71G done
Fri Aug 5 15:40:35 2011: VM communication interface socket family^[[71G done
Fri Aug 5 15:40:35 2011: Blocking file system^[[71G done
Fri Aug 5 15:40:35 2011: Virtual ethernet^[[71G done
Fri Aug 5 15:40:36 2011: Shared Memory Available^[[71G done
Fri Aug 5 15:40:36 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
What could be the problem?
ThanksWed Aug 10 08:49:11 2011: :: Adjusting system time and setting kernel timezone ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Starting UDev Daemon ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Triggering UDev uevents ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Loading Modules ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Waiting for UDev uevents to be processed ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190755/480496 files, 1567027/1921775 blocks
Wed Aug 10 08:49:11 2011: /dev/sda4: clean, 39914/14761984 files, 39001242/59034858 blocks
Wed Aug 10 08:49:11 2011: /dev/sda1: clean, 29/26104 files, 19024/104388 blocks
Wed Aug 10 08:49:11 2011: ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
Wed Aug 10 08:49:11 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: INIT: Entering runlevel: 5
Wed Aug 10 08:49:12 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:13 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:13 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Restoring ALSA Levels ^[[161G [BUSY] Found hardware: "HDA-Intel" "Intel Cantiga HDMI" "HDA:10ec0269,1025029b,00100004 HDA:80862802,80860101,001000
Wed Aug 10 08:49:14 2011: Hardware is initialized using a generic method
Wed Aug 10 08:49:14 2011: ^[[161G [FAIL]
Wed Aug 10 08:49:15 2011: Starting VMware services:
Wed Aug 10 08:49:15 2011: VMware USB Arbitrator^[[71G done
Wed Aug 10 08:49:15 2011: Virtual machine monitor^[[71Gfailed
Wed Aug 10 08:49:15 2011: Virtual machine communication interface^[[71Gfailed
Wed Aug 10 08:49:15 2011: VM communication interface socket family^[[71Gfailed
Wed Aug 10 08:49:15 2011: Blocking file system^[[71Gfailed
Wed Aug 10 08:49:15 2011: Virtual ethernet^[[71Gfailed
Wed Aug 10 08:49:15 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
Ok, I still have that fail during the 'Mounting Local Filesystems'.
If there isn't the swap partition it should be something else from my fstab..
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
UUID=1b52b0c4-5b56-4bee-8966-65bcaffbf2ee /home ext4 defaults 0 1
UUID=22475d68-29e5-4a22-8942-38cb30110d30 swap swap defaults 0 0
UUID=2bef0cce-027d-44fa-a086-056c390cd847 / ext4 defaults 0 1
UUID=59d811ed-2920-45c1-a5cc-e0675e212721 /boot ext2 defaults 0 1
UUID=325220A852207331 /media/MyPassport ntfs defaults,nofail 0 2
UUID=FDC0-6FEA /media/CowonIvana auto defaults,nofail 0 2
UUID=7AEB-F44F /media/CentralEurope auto defaults,nofail 0 2
UUID=287B-C290 /media/CowonGian auto defaults,nofail 0 2
UUID=3F9D788B3774630C /media/SanDisk ntfs defaults,nofail 0 2
But I can't find anything that looks unusual into my /etc/fstab -
How to unload dynamically loaded modules?
Hi,
I have a problem with unloading module, which I loads dynamically.
Here is a fragment my code:
<TitledWindow .......creationComplete="init()"/>
<mx:Accordion id="lista_ryzyk">
</mx:Accordion>
<mx:Script>
public function init():void
{ CairngormEventDispatcher.getInstance().addEventListener(LoadRisksEvent.EVENT_RESULT, populateAccordion);
public function populateAccordion(event:CairngormEvent):void
lista_ryzyk.removeAllChildern();
for (i in risks)
var m:ModuleLoader = new ModuleLoader();
m.url = path_to_module;
m.label = module_label;
m.loadModule();
lista_ryzyk.addChildAt(m,Number(i));
</mx:Script>
The modules loads fine. Each module adds own eventListener for some event. It works fine, but ONLY for first time. For next invoke populateAccordion function, the modules loads, but don't reacts for event. I investigate !!! that for events reacts that modules, which was loaded for the first time!!! How to remove it????Using array, didn't solve my problem, but it is possible that I'm doing something wrong.
I still can't catch event in second time loaded module :-((( I have tried to solve this problem from wednesday! it goes me crazy!
Could you, or anybody, try to inspect my code and help me? I have no idea how to manage it.
I know exactly what is wrong, but I can't improve that. In module's creationComplete function I display the UID of this module, and in body of eventHandler function I do the same. In case of FIRST time the displayed UID are the same, but when I load the module second time, the UID of the loaded module displayed in creationComplete function is new, but the UID displayed in handler function is the same as the first loaded module. So my event is catch by the wrong modul, and I don'tknow how to change it, how to process event in my newly loaded module. -
How to load modules in application but to call them at appropriate time
hi i want
to call module 2 on click event of a button on module 1
what ia m trying to do is i am preloading the modules using <mx:ModuleLoader
url="mod1.swf" id="m1"/>
<mx:ModuleLoader url="mod2.swf" id="m2"/>
but this was laoding all the modules one after another in the main application
but then i tried finding sloution in
<mx:ViewStack id="tops" width="100%" height="100%">
<mx:ModuleLoader id="test" url="mod1.swf" width="100%" height="100%"/>
<mx:ModuleLoader id="modPrint" url= "mod2.swf" width="100%" height="100%"/></mx:ViewStack>
this was serving my purpose of loading the modules and hiding them till i call them
Can some body suggest some better way of doing it ......... please dont tell me preloading ....coz i want to preload more then 20 modulesWhat database?
db -
Error starting "app name": Error loading module "appname" Verify error
I've downloaded 3 application on my device 9800.
at last i've download one app from Blackberry App World.
When i open that application, Its throws error.
"Error starting "app name": Error loading module "appname" Verify error."
I'm unble to open it. I've deleted and re install the app. Nothing has been help. I've tried to download others app. Its downloaded. But not open. the same problem has thrown.
What is the problem. how to open it. Now, if i download new apps, its throws the same error, " *"Error starting "app name": Error loading module "appname" Verify error.""*
Pls give a solution.Hi sgm_friends
Have you tried a Battery Pull Restart ? As you are constantly getting that error and unable to open any Apps that you download then to rule out any Software issue please reload your device Software ,but do a complete Backup of your device before that :
KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows.
I hope it will help.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Maybe you are looking for
-
5 users to contribute content from window based PC's to iWeb site
I would like to create a website in iWeb '09 which will require multiple users to contribute/publish content, but the other site collaborators do not have Macs, just Windows-based PCs.
-
When is Muse going to make it possible to create responsive websites?
Im just really curious if the Muse team are considering to make it possible to create responsible websites in a near future? There is a high demand for it. And its becoming an industry standard these days.
-
Sort by file size and/or pixel dimensions
I am constantly frustrated by the lack of ability to sort by file size or pixel dimension. I have many versions of the same images, and often want to find the biggest one, or one of a certain size, and it's very time consuming to have to scan all the
-
My ipod now does something I have never seen before. It syncs okay but itunes has to be closed to start with. I plug in the ipod and windows first will recognize it as removable disk. I can minimize this and it will sync most of the time. Is there so
-
Processing error in Internet Communication Framework
Hi , I'm in to the configuration phase of solman_setup in solution manager where I am facing the Processing error in Internet Communication Framework. Tcode: saomanager->service administration -> web service configuration: "SRT Framework exception: S