Loading new MIBs on a 1310 AP
Hey everyone. I'm trying to diagnose a remote AP installation using SNMP. The default SNMP traps aren't adequate for what I need to monitor. For instance, with the built-in MIBs I can information like input/output errors, link status, etc.
But, what I really want is to monitor radio associations, RSSI values, interference values, and negotiated link speeds.
I went to Cisco's MIB locator and downloaded a few .my files (such as CISCO-DOT11-RADIO-DIAGNOSTIC-MIB.my) which seemed like they might help.
However, I am now completely stuck as to how to use these files. Anyone able to point me in the right direction?
Thanks a lot!
For the SNMP to enable traps and poll the AP, make sure that the AP have the iso
view configured. Example:
snmp-server view iso iso included
snmp-server community view iso RO
snmp-server community view iso RW
To enable traps:
AP(config)#snmp-server enable traps ?
I hope it may help you.
Similar Messages
-
Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt
You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441) -
I submitted my question but ran out of room in the box. I can still down load new Apps to my iPod touch AND update them but CAN NOT update the older Apps. that was on the iPod before the problem.
I have been to Three Apple Service Center stores - In Tulsa OK, Oklahoma City OK, Tacoma WA and NO ONE could tell me what is the problem OR what to do to correct it. The Tech then tells me to get hold of the main Apple Service Center number. I tell them I already have and they still recommend going to them.
I have erased all information and started over as a new iPod Touch but the problem persists.
I have called the Apple Service number and they tell me to do everything that the the Tech's at the Apple Service center stores tried to do but DID NOT work.
After I spend a lot of time on the phone, I get told to make an appointment at a Apple Service center store so they can physically have hands on assistance. Come on folks I have already done that and they were of no help. When I say that, I get told that may be the only way I can get the problem resolved.
Surely there is someone out there that knows something about what is happening OR not happening with my iPod and provide a solution.
Thank You for your conciderationI submitted my question but ran out of room in the box. I can still down load new Apps to my iPod touch AND update them but CAN NOT update the older Apps. that was on the iPod before the problem.
I have been to Three Apple Service Center stores - In Tulsa OK, Oklahoma City OK, Tacoma WA and NO ONE could tell me what is the problem OR what to do to correct it. The Tech then tells me to get hold of the main Apple Service Center number. I tell them I already have and they still recommend going to them.
I have erased all information and started over as a new iPod Touch but the problem persists.
I have called the Apple Service number and they tell me to do everything that the the Tech's at the Apple Service center stores tried to do but DID NOT work.
After I spend a lot of time on the phone, I get told to make an appointment at a Apple Service center store so they can physically have hands on assistance. Come on folks I have already done that and they were of no help. When I say that, I get told that may be the only way I can get the problem resolved.
Surely there is someone out there that knows something about what is happening OR not happening with my iPod and provide a solution.
Thank You for your concideration -
Unable to load new information from configuration file /var/ldap/ldap_clien
Hi all,
When I run the command "ldapclient init", I got the error message:
# ldapclient init -a proxyDN=cn=proxyagent,ou=profile,dc=example,dc=ca -a domainName=example.ca -a profileName=UserProfile -a proxyPassword=pwd 10.1.10.50
Unable to load new information from configuration file '/var/ldap/ldap_client_file' ('Unable to open filename '/var/ldap/ldap_client_file' for reading (errno=2).').
Any idea?
Thanks a lot for your help!Does the profile UserProfile exist on your LDAP server?
Do the logs on your LDAP server show access problems?
Try using -v to get more verbose output -
My iPad 2 had no problems loading e-mails until about a month ago. Then it started periodically being unable to load new e-mails from one of my two Yahoo accounts (the primary one), but the secondary Yahoo account worked fine. (It says "Checking for mail..." and never stops checking). This only happens when I'm at home, using my home WiFi (a slow connection.) Now, for the past two weeks, about 95% of the time, neither of my Yahoo accounts works on the iPad, although I have no problem accessing these accounts on my iPod Touches or on my desktop Mac mini. If I take the iPad to my neighbor's house and use her WiFi, I can get the Yahoo mail. (She has cable/internet through Comcast; I have DSL.) I can access the Yahoo mail in public WiFi environments like Starbucks, Barnes & Noble, and the Apple store. I upgraded the operating system to ios 6.0.1, and the problem didn't go away. I've been to two Apple stores and seen two different "Geniuses" about this. The first one observed that although the iPad could load mail while in the store, it was doing so very, very slowly. She did a complete restore (erasing all of my apps, photos, etc.) but when I got back home, the problem resumed. The second Genius couldn't figure the problem out, either. He suggested I contact Yahoo, which I highly doubt will get me anywhere. I eventually added back all of my old apps, but then deleted them again in the past few days thinking that perhaps a persnickety app was causing a problem. No luck.
Answering my own question here. It's fixed! Another user recommended I switch to another wireless network then back to mine. And it worked! Mail is sending again with no problem.
-
My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?
Try this - http://support.apple.com/kb/ht1212 - also you can sign into www.icloud.com and remote erase the phone
recovery mode restore as descibed in HT1808 might be your last resort though -
I have an ipod, 4 g, my girlfriend loaded it with 700 songs but she is no longer a girlfriend and I signed up to my own itune account and want to load new songs, how can i save whats on there and also create my own data base of songs, i dont want to lose anything on the ipod
It sounds like you definitely want to turn off the auto-sync before you hook your iPod up to the computer
To turn off Auto-sync:
1) open iTunes
2) Preferences -> Devices -> check the box that says "Prevent iPods from syncing automatically
That way you can manually add songs to your iPod (using iTunes) without your iPod removing the songs on it -
I down loaded new OS X (Lion)operating system and discovered my CAD programs no longer run. Is it possible to reload the original OS X and remove Lion?
If you backed up before the upgrade, restore the backup.
If not you are going to have to erease the disk and install the older OS.
You should back up any data you want before so that it can be restored afterwards.
Is there a version of you CAD program that is Lion compatable? That would be an easier solution.
Allan -
Loaded new desktop SW V 6.1.0 B34, crashes on startup
Blackberry 9300 Curve, ATT provider
My desktop got infested with Open Cloud Security virus. I had to backup, erase, load new WIN XP OS, new MS Office, trying to sync phone with outlook.
Downloaded
Download Details
Software Name:
Desktop Software v6.1.0 B34
File Name:
610_b034_multilanguage.exe
Download Size:
114.873 MB
Published Date:
06/08/2011
When I try to launch the software immediataely crashes. I plug in the phone, select Synch media it crashes. I uninstalled the software and re-downloaded it, at the end hit Launch SW, and it crashes!
I am trying to paste a screen shot but it won't work, the warning says "Blackberry Desktop SOftware has encountered a problem and needs to close."Hi mathmentor,
This article should provide more information on the possible causes of this error message. http://bbry.lv/qsGb0w
Hope this helps,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
Too much delay to load new SWF after unloaded the current SWF
Hi,
In our application we are using more than 10 SWFs. While traversing one SWF to other trying to unload currently loaded SWF and loading the new one. We were success to unload the existing SWF but the problem is, taking too much time to load new SWF (more than 5 seconds). Please suggest a useful method to avoid this delay to get better performance.
will get some idea from following code snippet.
Thanks
public function SwitchSWFs():void
if (null != SystemAgent.getInstance().currentSWFLoader)
SystemAgent.getInstance().currentSWFLoader.unload();
SystemAgent.getInstance().currentSWFLoader = null;
trace("HomeUI : Previous swf unloaded!!!");
else
addChild(SystemAgent.getInstance().swfLoaderSecondSWF);
SystemAgent.getInstance().currentSWFLoader = SystemAgent.getInstance().swfLoaderSecondSWF;
//will invoke from a button click
public function LoadSecondSWF():void
SystemAgent.getInstance().swfLoaderSecondSWF.load(new URLRequest("Second.SWF"));
SwitchSWFs();Is the delay happening when you test locally?
One thing you might try is to load any Loaders you have up front before they are needed so that there is a better chance they are ready to be added to the display list when called for. So instead of having the button trigger loading the swf, you just have it call the switchSWFs function.
Another thing you might try if you keep it where the button triggers loading the file is to assign an event listener for the Loader to detect when it has finished loading and then have that listener's event handler function call the switchSWFs function. At least that way, the current swf is not unloaded until a replacement is ready and waiting. -
like it says itunes wont add/load new movies i have to the libary
Are they in the right format?
Right click a video and go to convert selection for iPod. Does it convert?
Or, are the videos not going into iTunes? For videos to be imported, they have to be in a quicktime-compatible format. Right click a video and go to properties. What is the file type?
btabz -
Loading new xml data into a already xml populated image display
Hi everybody,
I have a question about loading new xml data into a already xml populated image gallery.
So I have my gallery set up so it calls some xml when it first loads. What I would now like to do is load different sets of images via a different xml sheet via the click of a button.
So for example the loaded gallery already has all thumbs loaded and user can click on them to view the full size image. So next instead of the user having to close this gallery to allow a new gallery to open with a different set of pictures I would just like to have a button. This button will unload the existing thumbs from the gallery and load in new ones from a different xml file.
If anybody can help me with this it would be great as I am still on a steep learning curve with AS3.
Here is my AS3
var xmlPath:String = "pictures.xml";
var xml:XML;
var loader = new URLLoader();
loader.load(new URLRequest(xmlPath));
loader.addEventListener(Event.COMPLETE, xmlLoaded);
function xmlLoaded(e:Event):void
if ((e.target as URLLoader) != null )
xml = new XML(loader.data);
createMenu();
var numberOfItems:uint = 0;
var menuItems:Array = new Array();
function createMenu():void
numberOfItems = xml.items.item.length();
var count:uint = 0;
for each (var item:XML in xml.items.item)
var imageLoader=new Loader();
var menuItem:MenuItem = new MenuItem();
menuItem.addChild(imageLoader);
imageLoader.load(new URLRequest(item.url));
menuItem.linkTo = item.linkTo;
menuItem.mouseChildren = false;
menuItem.addEventListener(MouseEvent.CLICK, itemClicked);
menuItems.push(menuItem);
addChild(menuItem);
count++;
function ***():void
//menuItems.sortOn("zpos3D", Array.NUMERIC | Array.DESCENDING);
for (var i:uint = 0; i < menuItems.length; i++)
setChildIndex(menuItems[i], i);Thanks so much for the reply Andrei1
I think maybe my lack of knowledge when it comes to AS3 is not helping me at the moment because I thought I understood the code you supplied but there is something not going quite right.
So I messed around with the code and added the new_loaded_thumbs_btn to load in the "new_pictures.xml" but I am def doing something wrong.
import flash.ui.ContextMenuItem;
var xmlPath:String = "pictures.xml";
var xml:XML;
var numberOfItems:uint = 0;
var menuItems:Array = new Array();
var loader = new URLLoader();
loader.addEventListener(Event.COMPLETE, xmlLoaded);
loadXML("pictures.xml");
new_loaded_thumbs_btn.addEventListener(MouseEvent.CLICK, loadXML);
function loadXML(path:String):void {
loader.load(new URLRequest("new_pictures.xml"));
function loadXML(path:String):void {
loader.load(new URLRequest(path));
function xmlLoaded(e:Event):void
xml = new XML(loader.data);
createMenu();
function createMenu():void
clearMenu();
numberOfItems = xml.items.item.length();
var count:uint = 0;
var imageLoader;
var menuItem:MenuItem;
for each (var item:XML in xml.items.item)
imageLoader = Loader();
menuItem = new MenuItem();
menuItem.addChild(imageLoader);
imageLoader.load(new URLRequest(item.url));
menuItem.linkTo = item.linkTo;
menuItem.mouseChildren = false;
menuItem.addEventListener(MouseEvent.CLICK, itemClicked);
menuItems.push(menuItem);
addChild(menuItem);
count++;
sortChildren();
// removes previously placed objects
function clearMenu():void {
var menuItem:MenuItem;
while (menuItems.length > 0) {
menuItem = menuItems[0];
removeChildAt(getChildIndex(menuItem));
menuItem.shift();
function sortChildren():void
//menuItems.sortOn("zpos3D", Array.NUMERIC | Array.DESCENDING);
for (var i:uint = 0; i < menuItems.length; i++)
setChildIndex(menuItems[i], i);
When the image display 1st loads it displays the new_pictures.xml thumbs which I thought would load through my new button when clicked.
And there was me thinking I was getting the hang of AS3.
Could you please point me in the right direction in what I am doing wrong,
Thanks for your time and effort in advance -
Deleted mail shows up again, need to force quit, won't load new messages.
I've been having email issues after upgrading to OSX 10.8.2 Everything is fine with first opened and then after a bit starts to act funky. I will delete messages and they will pop back up, it won't load new emails unless I shut it down and restart. It also won't close unless I force quit. This has been happening for a while. I am using GoDaddy for my email server and the Mac Mail App. I mainly use one email (the godaddy email) and have many, many "mailboxes/folders" in that account. I wasn't sure if the amount of "mailboxes/folders" was why I am having the issues, or the best way to go about saving them was. I'd like to be able to save the actual "mailbox/folders" as they are organized by project, but noticed the archive function doesn't let you put in folders. I included a screen shot of how my innox is set up in case that helps. Thank you for help, let me know if there's anything else I should include.
I've been having email issues after upgrading to OSX 10.8.2 Everything is fine with first opened and then after a bit starts to act funky. I will delete messages and they will pop back up, it won't load new emails unless I shut it down and restart. It also won't close unless I force quit. This has been happening for a while. I am using GoDaddy for my email server and the Mac Mail App. I mainly use one email (the godaddy email) and have many, many "mailboxes/folders" in that account. I wasn't sure if the amount of "mailboxes/folders" was why I am having the issues, or the best way to go about saving them was. I'd like to be able to save the actual "mailbox/folders" as they are organized by project, but noticed the archive function doesn't let you put in folders. I included a screen shot of how my innox is set up in case that helps. Thank you for help, let me know if there's anything else I should include.
-
How to load new planning application in EPM 11.1.1.2-DIM ESSBASE ADAPTER
how to load new planning application in EPM 11.1.1.2-DIM ESSBASE ADAPTER
If you trying load metadata into planning using DIM then have a look here :- http://www.oracle.com/technology/obe/hyp_fp/DIM_Planning/OBE_Dim_Planning.html
Cheers
John
http://john-goodwin.blogspot.com/ -
Try to load new iPad Mini with reserve copy from my iMac
Hi,
Try to load new iPad Mini with reserve copy from my iMac coming from my iPhone 4S.
When selecting the copy I can not find the just made copy from my iPhone 4S.
I see tree others, but not the latest from iPhone 4S.
Is there a max on copies showed ??
Please advise,As far as I know there is no limit to the number of backups that you can store in iTunes as long as you have the available storage capacity on the Mac. I have at least 10 or 12 backups in iTunes for my iPad and iPod Touch. Every time that you restore from a backup - a time and date stamped backup is created that cannot be overwritten. I must have 8 of those backups on my Mac.
Did you look in iTunes>Preference>Devices to see if the backup is really in there?
Maybe you are looking for
-
[SOLVED] How Can I Add a Simple Volume Indicator to Panel?
I've managed to get an XFCE de up and running and sound is working as well as keyboard shortcuts. I don't get any splash message to tell me the volume levels, neither do I have any indicator in the panel. How do I get any feedback on my current sound
-
Satelite C660 refuses to shut down
Hi all, hope someone can help, my laptop is refusing to shut down and I've no idea why. Anyone have any suggestions? Thanks
-
Lightroom 3.4 unable to recognize *.NEF
Looking for ideas or suggestions on how to get over the following issues: Problem: 1. Lightroom version 3.4 (64bit) is unable to import a batch of deleted and recovered pictures taken with a D700 in raw, *.NEF format. Files were recovered from Compac
-
Firefox is preventing photographs and pictures from being displayed because it considers them to be pop-ups. I have turned off the pop-ups blocker on my security system but this did not help. There is a difference between annoying commercial or infor
-
JVM error 513 for blaclkberr​y curve8310
hello, i am getting jvm error 513 in my blackberry curve 8310 how to correct that now and where i can get the OS and get it repaired? what is thew procedure for that? plz help me