Loading of lis extractions into cube

hello everyone,
i have extracted say 2lis_11_vasth from r.3 to bw and all the transformations, infopackage and dtp have been done properly, but wen im going to the contents of the cube i see the fields but not the data. before replicating in rsa3 it shows x number of data records, why am i not getting the data into the cube.
pls help
thanks in advance

Hi Rajesh,
Please check the below SDN blog for Long Texts in SAP BW.
Long texts in SAP BW: Modeling
Also go through the below thread.
Flat File Datasource
Hope it helps.
Regards,
Raghu

Similar Messages

Loading InfoObject master data into Cube

Hi Guys,
I have a question. I created an InfoObject as a data target and loaded data into that data target. I created a cube and I want to include this infoobject in the cube. Now How do I load data into this cube from the InfoObject.Because the InfoObject doesnt have any option to select data targets, since it is master data.
Data is being loaded into the InfoObejct. But when I check the cube there is no data.
How do I load this master data into the cube without update rules?
Thanks in advance.

Hi,
i think u need load some value to transaction data so that you can report on it, but how you are going to decide which row will be having which value from master data? in general value for this should come from transactional data, or you could assign some constant value to it.
Do you want to use any attribute of Inoobject in report? And if you have any key value for that coming from Transaction data, you can use rule type as read from master data
It depends upon your requirememt.
Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object into the cube.
As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
You have to get the value of your infoobject into Cube from datasource, even though you want to use attributes only.
You will have to add it and it wont have any effect the transaction data getting loaded into the cube will be different from the master data only SID's are matched during loading of the data.
You should load separate master data into the 0recontract infoobject with the master data source and make the respective object contract type and contract category as navigation there.
Also you should add 0recontract to the cube and update it from the transaction data source as you have said that it can be updated.
Then just do the normal restrication at the report level
You can make this display attribute as naviagatioonal first in the master data object and then in the cube make this attribute as navigational.
then you can use it to restrict in the cube
You can use Category as InfoObject in your cube, and while loading data for your infoobject in the rule type you can use option as reading from master data. It will take key of infoobject, and will update attribute value in your cube.
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
You can also restrict with attributes value, Just in the restrcition of your infoobject in query designer, slelect left-botton button of 'Dipaly Other Values', here you can select you attribute and its value for restriction as well
Regards,
Hareesh

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Data not loading /updating into cube 0lc_c03

Dear Friends,
I extracted data for three data sources i.e. 2lis_03_bx,
2lis_03_bf,2lis_03_um i got data in BW PSA with out any
error but that data is not updating in cube 0lc_c03
i have done settings at r/3 at t.code mcnb,SBIW and I had make NDI flag active at t.code FIBF. do i need to right.
at SBIW I have done like this settings: Inventory controlling
1,Determine Industry sector I have selected Standard (core).
2,Transaction key maintenance for SAP BW I have selected application MM and operat all i.e. 0,1,2,3,4,5,6........all of MM and saved
3,Then stock initialization.
and deleted setup table data for inventory controlling
and after assigning keys I again loaded setuptable.
I am geting data in r/3 rsa3 and in BW PSA with out errors for all three data sources but not geting in cube
but at data source 2lis_03_um update rules there are few key figures with out green light i.e. 'x' but update rules are active please guide me do ineed to write
any update rule level routines please guide me.
please guide me how to get data into cube.
Thanks in Advances
rafeeq ahmed
<b></b>

Hi rafeeq,
Are you using business content update rules or custom.
check each rule seperately. do a simulation on the data load, if you feel the update rules are correct.
Check if your validity table is maintained.
hope it helps.
kris

Error in viewing successfully loaded data into cube..

hi gurus,
I had a problem on viewing my data into cube. These data were successfully loaded from LIS environment. The errors i had received were 'Your user master record is not sufficiently maintained for object Commodity and Company Code Auth object'..'System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZFIN___ ZFIN___'... 'System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_BASIC_QUERY_DATA_GET ZFIN____ 64' ... 'System error: RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GET ZFIN____ 64 ...
Does anybody encounters these errors? Can you give me step by step procedure on how to deal on this errors?

This thread will solve your problem. look for Bhanu's post in it.
Re: Cube Security

Load MD attr into cube

Hi,
1) I have one master data 0PROJ into cube but never loaded. its attr of 0wbselement and loaded in MD.
I tried to add in update rule following code
data:    begin of i_wbs occurs 0,
                                0PROJ like /bi0/mwbs_elemt-PS_PRJTYPE,
         end of i_wbs.
should it load 0PROJ directly when i load cube ? but how coz i dont get any data into that field.
Thanks,
Edited by: Keral Smith on Feb 20, 2009 11:16 PM

Hi guys,
Thanks for your input.
you ask for more detail - here it is,
I have 0REC_NETWORK inthe cube. which comes from 0CA_TS_IS_1 extract structure. that table has the field POSID. its mapped properly in transfer rules also.
But not populated in cube neither its gets populated in RSA3 when i test extractor.
that means 0rec_network doesnt get records from even R/3 !!
I have 0PS_PRJTYPE -as a attribute of 0rec_network. since network doesnt have any data i m not able to get any data into 0ps_prjtype.
does it require changes into extractor ?
0ps_prjtype is been there as attr. into 0wbselement. But 0wbselement is not there into infocube. Can i get 0ps_prjtype populated from wbs element by changing into update rules ?
suggest any good way for that please.
Thanks,
KS

Dump ASSIGN_TYPE_CONFLICT when loading into Cube

Hi,
since an few weeks we have sometimes a problem when loading data from DSO to cube.
After transport a changed cube the first dataload into the cube dumps with ASSIGN_TYPE_CONFLICT.
We always activate all transformations and all DTPs which belong to the changed cube and also transport them.
When we repeat the dataload after the dump there is no problem and the data will be loaded successfully.
The dump appears on a very strange coding-place:
* FORM WRITE_DATA_CHAVL                                              *
* Kommentar: incoming data is based in characteritic values!        *
*              Transformation to Dimension Id's needs first to        *
*              translate the charateristic values into SID's          *
FORM write_data_chavl
USING
    i_r_data       TYPE REF TO data
    i_simulation   TYPE rs_bool
    i_trexaggr     TYPE rs_bool
    i_req_sid      TYPE rssid
    i_t_tabix      TYPE gt_t_tabix
    i_ncum_loadtp TYPE ncum_loadtype
    i_pkg_id       TYPE rssid
CHANGING
    c_subrc        TYPE i.
DATA:
    l_recno       LIKE sy-tabix,
    l_erridx      LIKE sy-tabix,
    l_nexterr     LIKE sy-tabix,
    l_errnumbers TYPE i,
    l_subrc1      LIKE sy-subrc,
    l_pdimid      TYPE rssid.
FIELD-SYMBOLS:
    <l_t_cubeval> TYPE g_t_cubecha,
    <l_s_cubecha> TYPE g_s_cubecha.
IF i_pkg_id <> 0.
*   bug, cube is not delta write enabled...
    cl_rsdd_cube_writer=>monitor_log(
      i_recno    = 0
      i_msgid    = 'DBMAN'
>>>      i_msgno    = '971'
      i_errtp    = ''
      i_errnm    = ''
      i_fieldnm = '' ).
    c_subrc = cl_rsdd_cube_writer=>nc_error-no_continue.
    RETURN.
ENDIF.
Does anyone else have this problem?
Or does anyone even have the solution?
I haven't found anything useful in SDN and SAP-Notes....
Christian

Hi Christian,
In that case check if this helps.....
1905680 - SP32: 'ASSIGN_TYPE_CONFLICT' in transformation during loading data using DTP
It says
SAP NetWeaver BW 7.31 (SAP NW BW 7.3 EnhP 1)
Import Support Package 10 for SAP NetWeaver BW 7.31 (SAPKW73110) into your BW system.
Regards

Getting an error while trying to load data into cube

Hello,
I am trying to load data into cube but it gives me following error:
fiscal year variant not expected.
Can someone tell what could be done on fiscal year
Cheers
Jim.

Hi,
May be you have not mapped anything to fiscal variant or not included fiscal variant in the cube but you have used fiscal period inside it.
You should load fiscal variant if you wanna use fiscal period.
Map fiscal variant to a constant K4 or from the source if present and then see the result.
Generally it is K4 except for FI-CO cubes .
In the transfer rules, select field '0fiscvarnt' 'Tp' click
Enter K4 for Constant................Save and Activate
Iam sure you'd fix the issue.
Regards,
Ray

While loading transaction data into cube what are the tables generats

Hi,
while loading transaction data into cube what are the tables normally generats.

Hi,
Normally datas will be loading to 'F'- Fact tables (/BIC/F****) *** - cube name..
When you do compress the request the data will be moved into E tables.
Regards,
Siva.

Loading data from APO-BW cube into DP planning area

Hello,
Please explain to me how to load data from an infocube within APO into the DP planning area. So far, I generated the data mart, created the update rules for the DP planning area (cube) and replicated data sources. The problem that I am having is that when I create the infopackage, there is no data targets on the data target tab. How can I get the data targets to display? All the other actions appear to be set up correctly (confirmed by BW experts). Can data be loaded from an APO-BW cube directly to the DP planning area cube?
Thanks

Hi James,
Loading of data from an InfoCube to a Planning Area is done using transaction /SAPAPO/TSCUBE (program /SAPAPO/RTSINPUT_CUBE). You just specify the InfoCube, target Planning Area, Selection condition, Infocube Key Figure to PA KF mapping, etc).
Have you tried this transaction already?
Hope this helps.

Error while loading data into cube 0calday to 0fiscper (2lis_13_vdcon)

Hi all,
I m getting following error while loading the data into cube.
"Time conversion from 0CALDAY to 0FISCPER (fiscal year V3 ) failed with value 10081031"
amit shetye

Hi Amit,
This conversion problem. Calender not maintained for Fiscal variant "V3", for Year: 1008.
Maintain calender for year: 1008 and transfer global setting from soruce(R/3).
RSA1--> Source systems --> from context menu --> transfer global settings > choose fiscal year variants and calender> execute
Hope it Helps
Srini

Failure while loading into cube

I am doing loading into Headcount cube on daily basis through a process chain from two different datasources.
The system is 3.5
But it fails while loading and it ends up with dump in ST22 with the exception ADD_PARTITION_FAILED.
Can anybody help regarding what needs to be done to overcome this issue?
Thanks.

Hi,
This thread solves ur problem
error while loading data into cube
Tarak

Failed loading from PSA into Cube

Hello,
I tried to load data from flat file into a cube. I defined the processing as PSA only in Infopackage, the loading was OK, but when I loaded data from PSA to cube, it failed. I checked the PSA, the Status indicator was red, this record is the first record in flat file. The detail error message as follow:
TYPE: Red
Message: Value "01.02.20" of characteristic 0Date is not a number with spaces
ID: BRAIN
NO.: 19
LTxt:
One record in flat file as this:
M-01;GP-01;1000;01.01.2006;2006;K4;20
the corresponded infoobjects:
Material;material group;customer;calend day;fiscal year;fiscal year variant;quantity
I was confused much on the error message, I checked flat file, infosource, transfer and update rules,cube and so on. Could you please help me to solve the problem? thanks advaned!
Ryan

Hi,
0DATE has to be available in internal date fomat to book into the infocube. you have the following options:
-Change the 0DATE-column in your flatfile to the format YYYYMMDD.
-In the transfer structure, choose a conversion routine to convert the external date format to internal date format.
Regards,
Beat

How to make data loaded into cube NOT ready for reporting

Hi Gurus: Is there a way by which data loaded into cube, can be made NOT available for reporting.
Please suggest. <removed>
Thanks

See, by default a request that has been loaded to a cube will be available for reporting. Bow if you have an aggregate, the system needs this new request to be rolled up to the aggregate as well, before it is available for reporting...reason? Becasue we just write queries for the cube, and not for the aggregate, so you only know if a query will hit a particular aggregate at its runtime. Which means that if a query gets data from the aggregate or the cube, it should ultimately get the same data in both the cases. Now if a request is added to the cube, but not to the aggregate, then there will be different data in both these objects. The system takes the safer route of not making the 'unrolled' up data visible at all, rather than having inconsistent data.
Hope this helps...

Loading Transfer Rules details into Info Cube/ODS - VVVVV urgent

Hi Guys.
I have a requirement to load all the active and inactive transfer rules into a cube so that i can prepare a report which are the active and inactive transfer rules existed in out BW system.
Please hel me out in this regards.
ThanX inadvance
Peter B

Hi Varaprasad,
Ok, can we make use of that table for reporting?
Or
I can created a Cube as per that table and i don't know ho to load that table data into that Cube.
Please let me know ASAP.
Thanks in advance
Peter B

Loading of lis extractions into cube

Similar Messages

Maybe you are looking for