Loading of master sata

Hi Experts,
I am new to BI. pls help me.
i want to load the master data for 0MATL_GROUP_TEXT i have both infosource and datasource but no info object.
and when i am trying fid this in the BI content i am not able to find this.
how to load this master data.
Regards,
Sridhar

Hi Dilek,
thanks yes i have found that and for info providers how can i load the data for this.
when i am trying to insert characteristic as info provider it is iving msg that
InfoObject OMATL_GROUP is not yet available
or it is inactive;
Do you want to create and activate the InfoObject ?
when i click yes it is saying that Action was cancelled
pls ive me the solution.
Regards,
Sridhar

Similar Messages

Error in Loading Project master Data into BW from R3

Hi Experts,
Actually I am trying to load Project Master Data from R3 to BW through a BW Process chain, Its a daily activity which we are performing since long time.
But since last 2 days loading is getting failed with an error in ST22 in source system (R3):
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Date and Time          27.09.2011 01:47:15
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_CGPL_TASK==================CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "PREPARE_FOR_RELOAD" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "ME->OUTLINE_PARENT").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
I tried to reload the data but no help, I am not sure how to reolve this issue, I also contacted to BASIS even they are not aware of this error.
I am seeking help from you guys.
Please help to overcome this problem...!
Thanks.

it seems basis issue
howver check below links
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/objects_objref_not_assigned-1793688
OBJECTS_OBJREF_NOT_ASSIGNED error in a background execution
thanks
pathak

Error while loading 0Plant master data in PSA

Hi,
i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
<i><b>'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked'</b> .</i>
We are not using SD module and so no sales organization data is maintained have through a couple of posts posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.

Hi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Error when loading the master data

Hi all,
Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
Thanks in advance.
Regards,
Shaik.

Hi,
Please go through the following threads:
PERFORM_CONFLICT_TAB_TYPE shortdump during data loading into ODS
Perform_conflict_tab_type error
PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
Next time you might want to just search the forum first... lots of surprises!
Hope this helps,
Cheers,
Gimmo

'Overlapping Time Intervals' error while loading the Master Data

Guys,
          Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM         Valid To                  Valid From                 Edition
1001             12/31/9999             04/01/2010                2010.1.1
1001             01/31/2010             03/01/2010                2010.1.2
1001             12/31/9999             02/01/2010                2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.

FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash

Getting the error while loading the master data

Hi
i have tried to delete the master data using right click and delete master data, but still there are data.
Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
and data load got failed with error message "master data/text of 0vendor already deleted "
and due to this i could not able to load my other infoprovider (which have 0 vendor).
can any body help me, it very urgent...
thanks and regards
Anupam

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Error while loading the master data into hierarchy

Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
Prateek

Hello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep

Error while loading the master data

Hi Masters,
When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Could you please help me...
Thanks & Regards
Raja.S

Hi,
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
Resolutions:
Reload the Master Data manually again from Info-package at RSA1.

Impact on transactional Loads if Master data is not loaded

Scenario for your reference:
The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21.
I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
And how can i find out the impact and correct the transaction data if it does?
Can any 1 help me with this?

Hi,
If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
So, first load the master data and run the attrib change run process.
After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
If delta loads are there, you might need to performa full repair.
Regards,
Rahul

Loading InfoObject master data into Cube

Hi Guys,
I have a question. I created an InfoObject as a data target and loaded data into that data target. I created a cube and I want to include this infoobject in the cube. Now How do I load data into this cube from the InfoObject.Because the InfoObject doesnt have any option to select data targets, since it is master data.
Data is being loaded into the InfoObejct. But when I check the cube there is no data.
How do I load this master data into the cube without update rules?
Thanks in advance.

Hi,
i think u need load some value to transaction data so that you can report on it, but how you are going to decide which row will be having which value from master data? in general value for this should come from transactional data, or you could assign some constant value to it.
Do you want to use any attribute of Inoobject in report? And if you have any key value for that coming from Transaction data, you can use rule type as read from master data
It depends upon your requirememt.
Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object into the cube.
As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
You have to get the value of your infoobject into Cube from datasource, even though you want to use attributes only.
You will have to add it and it wont have any effect the transaction data getting loaded into the cube will be different from the master data only SID's are matched during loading of the data.
You should load separate master data into the 0recontract infoobject with the master data source and make the respective object contract type and contract category as navigation there.
Also you should add 0recontract to the cube and update it from the transaction data source as you have said that it can be updated.
Then just do the normal restrication at the report level
You can make this display attribute as naviagatioonal first in the master data object and then in the cube make this attribute as navigational.
then you can use it to restrict in the cube
You can use Category as InfoObject in your cube, and while loading data for your infoobject in the rule type you can use option as reading from master data. It will take key of infoobject, and will update attribute value in your cube.
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
You can also restrict with attributes value, Just in the restrcition of your infoobject in query designer, slelect left-botton button of 'Dipaly Other Values', here you can select you attribute and its value for restriction as well
Regards,
Hareesh

Problem loading material master (IS Mill) data from ECC to BI

Hi Gurus,
We have a problem loading Material master data from ECC to BI 7.0 SP 18.
The scenario is :
The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
That is data element MATNR has 18 chars and its output length is 40 chars.
When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
OMSL setting shows length as 40.
When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
Till here no problem.
On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
OMSL setting cannot be set more than 18.
Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
Diagnosis
Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
I did search for SAP note related to this... but could not find any.
There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
Requesting you all experts for help.
Best Regards,
Deepak

Hi,
follow bellow steps:
1. you need to activate the Datasouce in BI side.
Goto RSA1> Datasource> Select Datasource> Double click> Check fileds and Activate.
2. Replicate the Datasource into BI side.
3. Check the RFC connections by useing SM59.
Regards.

Load back Master Data

Hi, Export,
I was trying to load text for dataSource "0FUND". It was loaded with Master data. Then I unchecked "With master data", the "Attribute" was deleted. But now I would like to get that "Attribute" (Master data) back. I checked "With master data", the "Attribute" tab appeared. But all the "Master Data Tables" under "Master data/texts" tab is disappeared. How I can get them back? Thanks.
Marea

Hi,
After you activate the infoobject, all the tables will appear under master data tab. I think you are trying just by selecting the marking the master data box, without activating the infoobject. Please activate and check whether it is appearing or not.
Thanks
Sathish

DIM IDu0092s are polluted only when we load the Master data and SIDu0092s

DIM IDs are polluted only when we load the Master data and SIDs are polluted only when load the retraction data. System automatically performs the reconciliation of DIM and SIDs when we delete the transaction and master data.
a. True
b. False

Hi,
You can use the mapping section of the transformation file for this purpose. It should be something like:
*COL(5) + *Str(_) + *COL(1)
I am considering that the 5th column of your file is the property. The 1st column is the ID.
Please take a look at the below link for more information:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/5d/9a3fba600e4de29e2d165644d67bd1/content.htm
Hope this helps.

How to Load the Master Data for custom defined Z infoobjects?

Hi Gurus,
This is the requirement.
Some screen enhancements has to be made by adding new Custom fields( like two text boxes,eg Name and city ) in such a way if we enter data into that text box,that data value for both of the Enhancements has to be stored in some table.If this data is a master data,then how would I pull this master data into BW.
Please someone throw some light on this problem.
Lets say a Screen is enhanced with NAME and CITY with text text boxes.Let the user enters the value for NAME and CITY.Let them be stored under two different tables ZTAB1 and ZTAB2.How would I load this master data into custom Defined Z infoobjects ZNAME AND ZCITY in BW.
Please help me out.
Thanks is Advance,
Regards

you can by creating generic datasources on thoase tables with Full load or delta.
if the number entries is less.. you can try full load...
if it is more... along with required fields...put date also as one fields. which needs to get date of execution of program or date of uploading to Tables. this will be useful build Delta Mechanism.
all the best.
Nagesh Ganisetti.

Adobe form for loading material master

Hello
I am looking at adobe form for loading material master. We are currently on ECC 6.0 but without netweaver however reading some of the documents on the internet most of them talk about netweaver. Is netweaver a pre-requisite for interface from adobe form?!
Please let me know.
Thanks

Hi Jean,
Better go though the thread given at Wiki...it help out alot to under all abt it...
http://wiki.sdn.sap.com/wiki/display/ABAP/SAPInteractiveFormsbyAdobe
Regards
Priyanka.P

Loading of master sata

Similar Messages

Maybe you are looking for