Loading Pages on the Internet

I have been having issues loading pages on the internet--either extremely slow or not at all.
I have done MANY things to resolve this with no success. I have reinstalled my OS. Reset modem and connection. Checked speed of connection at the IP site. Daily I restart and reboot my computer. I have done a protocol of Safeboot five times many times.
I run Repair Disk in Disk Utility every few days. Today after Repair Disk finished the only issue that showed, after running it 3 times was "SUID file "systems/Library/CoreS . . . has been modified and will not be repaired". This is different than before as there were many issues listed after running Repair Disk.
One more thing, I plugged my computer into my housemates data chord and had no problem loading pages whatsoever. Our macs are hardwired to the same modem and router.
Does anyone know what the message in Disk Utility means exactly?? Is there a way to resolve that issue?? And does anyone have a new suggestion to help with loading pages issues?? THANKS.

G'day,
Welcome to the forums!
To help you, I need to understand you situation a bit better. So I have some questions:
1) Am I correct in saying that you had no problems when you connected using your friends data cable?
If you are normally connected by Ethernet cable, and it is only slow when on your cable, then it could be the cable that is broken.
2) Are you having problems when using the internet wirelessly?
3) Why did you reinstall the OS?
In relation to Disk Utility - don't worry about that - it is not a problem. All Macs give that message.
Cheers,
Rodney

Similar Messages

  • HT1338 since updating to mountain lion i have noticed a considerable decrease in the performance  of my iMac - most notably when loading pages on the internet.  Is this common and is there a fix?

    Since updating to mountain Lion, it's like being back in the 80's taking 30 seconds to load a page?  Is this common or are there any ideas?  I've checked my router and my ISP are all in order.  Whilst the mac is wired to the router, everything else in the house is running fine off the wifi network.  I am not very technically minded so any help is appreciated.

    Which model and version of iMac do you have, AND more importantly, How many GB's of RAM do you have?  Mountain Lion has shown itself to be very memory intensive in operation and the bare minimum amount of RAM to achieve any system speed is 4 GB's, according to other Forum users' experience, and mine.  And more RAM than that speeds it up more.
    Hope this helps

  • My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

    My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

    My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

  • How to extract HTML page from the internet

    i am new to java, i wish to know how to extract Html page from the internet and also how to identify the differences between the images and text information?

    You can create a java.net.URL that points to the file you want to "extract" and read the HTML code (or what ever that file contains) from there using the inputstream given by URL.openStream().
    The difference between images and text... well, images are embedded in html using the img-tag. example: <IMG src="http://forum.java.sun.com/images/reply.gif" alt="Reply">. Attributes width, height, alt are sometimes left out and there may or may not be quotes around the values and everything is case insensitive... you'll be having hard time trying to parse the input so I'd suggest using existing parsers.
    What are you trying to do anyway? You can load a URL directly to a JTextEditorPane with the setPage(URL page) method...

  • Every time that I try to print a page from the internet, my Mac crashes and I get a "Crash Reporter" icon.  Any suggestions?

    Every time that I try to print a page from the internet, My Mac (Maverick 10.9.4) crashes and I see a "Crash Reporter" icon.  Any suggestions?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Having an issue with a page in the internet

    Hello,
    I registered to the forum a few days ago but did not introduce myself. Please accept my apology.
    I have a Blackberry style 9670 model, of which I am very happy with.
    I was having an issue with a page in the internet, in which I was receiving errors on my device. My daughter has a Blackberry Curve and she was able to access the page without any errors. I can not figure out why I do.
    Thanks

    I am not sure if this is the same issue but there was a bug that caused small exchange numbers to become negative which was resolved in one of the 11.1.1.3 patches, it is worth logging into My Oracle Support and having a look at the patches available.
    9588147 – In exchange rates table, entering very small values become negative after you save the data forms. For example, 0.000071 becomes –7.1E-5 after you save the exchange rate.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • XMLu00B4s http page on the Internet

    HI all
    I have to build an scenario quite challenging for me. Look at this link: http://www.ecb.int/stats/eurofxref/eurofxref-daily.xml. This XML is a http page on the Internet, and I´m supposed to get the data from it in order to map it to an idoc.
    The problem is I don´t know how to recover the data from the http page on internet.
    ANy idea?
    Regards
    Noelia

    Hi Noelia,
    no need for any web service
    you can get the data from java (via java proxy)
    and you will have it inside your XI
    URL url  = null;
         URLConnection conn = null;
         BufferedReader innn = null;
         //url = new URL("http://address.com/file.xml");
          url = new URL(inin);
         conn = url.openConnection();
         innn = new BufferedReader(new       InputStreamReader(conn.getInputStream()));
    this is all you need to get that data from a WWW page:)
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Where to find the top line on a page on the Internet at IMac? I lost it when was trying to set my ITV on my computer. Can't go to any pages, because there is no line on top of the page. Thank you.

    Hello, where to find the top line on a page on the Internet at IMac? I was trying to made some settings to my computer and now I lost the line on top of my computer , when I open a page. Thank you.

    I'm not sure which line you are refering to as the top line.
    What web page? 
    What web browsr?
    What do you expect to see on the missing line?
    How about a picture?
    How to show us a screen image.  Avoid personal identification.
    command + shift + 3   Will take entire screen.  You hear a click.
    command + shift + 4 Lets you decide what to take.  Mouse pointer changes. Move mouse to upper left corner of desire image.  Hold down left mouse key where to start image.  Drag mouse to lower left of where you want to stop image.  Release mouse.
    You will get a picture n.png file on the desktop.
    one the forum input panel you will see the camera icon.
    click on camera icon.
    another window will appear.
    Make sure you have selected the from your computer tab.
    click on Browse button
    An open file panel appears.  Select the file.
    After selection a file, I have this screen showing.
    You will have to click on Insert Image.  You may have to scroll down to see Insert Image button.

  • How can I upload my web page to the internet?

    How can I upload  my web page to the internet. When I click on "publish" it automatically takes me to mobileme - which is no longer accepting members..

    http://financialbin.com/2011/06/13/steve-jobs-confirms-discontinuation-of-iweb-i n-icloud-transition/
    I don't think you can upload pages from iWeb anymore.
    Information about the MobileMe transition

  • I created a site in iWeb, I have a new computer. Where I can download the app to update my page on the internet.

    I created a site in iWeb, I have a new computer. Where I can download the app to update my page on the internet.

    Julianauip wrote:
    So the only way would be to buy iLife?
    If you don't have the old computer's install disks, that is indeed the case.
    Incidentally you don't need to post a duplicate response - all posters see all posts in a thread.

  • Firefox loads with "parent.lock" in profile folder. Can't get beyond start-up page on the internet. Creating a new profile & deleting old profile in ProfileManager did not solve prblm. When I start Firefox the file is back. scan disc found nothing

    Every time I open Firefox I can't get beyond the first page. No connection to internet. It just says "connecting" and hangs. I create a new profile and delete the old one and I can start firefox and get to the internet, but when I shut the system down, the next time it will not go beyond the first opening page and the "parent.lock" file is present in my profile folder.

    Every time I open Firefox I can't get beyond the first page. No connection to internet. It just says "connecting" and hangs. I create a new profile and delete the old one and I can start firefox and get to the internet, but when I shut the system down, the next time it will not go beyond the first opening page and the "parent.lock" file is present in my profile folder.

  • Problem loading page, error the proxy server is refusing entry

    My computer crashed a week ago, with numerous viruses. After it was fixed, when I go into Firefox, the screen I get is Problem Loading Page, then in a dropdown box it says the proxy server is refusing connection. Cannot get into the internet. What can I do?

    In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
    See "Firefox connection settings" in [[Server not found]]
    You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
    If you do not need to use a proxy to connect to internet then select No Proxy

  • Firefox stops loading pages and hoses internet connection for all other apps

    Running Firefox 3.6.3; XP sp3; FSecure Client Security 9
    After using Firefox for a while - sometimes a few minutes, sometimes a few hours, it will stop loading pages. If I click on a link, nothing happens. The program still responds to key / mouse input, but refuses to load any new pages. Furthermore, it stops all internet connections from my machine, so that IE and Opera stop working. I think it also stops email, but I am not sure.
    If I quit Firefox, the process is still running and I have to quit it manually from Task Manager. That solves the problem and internet connections are restored.
    I have tried in safe mode, I have tried removing all extensions, I have tried deleting my profile and doing a clean re-install. It's driving me crazy. Any thoughts?

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Firewalls]] and http://kb.mozillazine.org/Firewalls

  • How to print a specific page from the internet

    I have tried to print a specific page, and get about seven pages that are linked to it, without
    seeing the specific page I wanted printed out. The page settings under printer only lists header and footer
    info, and no choices to print only this page or frame. There is no way to print  one specific page on this printer?
    I always was able to do this  with the Epson printer I just replaced, but unable to with this printer.
    Please help! There must be a way to do this when printing from the internet. Thanks for any help.

    deezire
    Welcome to the HP Community Forum.
    I don't have any idea what you are trying to print, nor do I wish to know.  Smiling.
    The key may be to control this in Print Preview like you would with most things when you are printing from a Browser.
    Manage Print Output with Print Preview
    ========================================================================
    Depending on which browser you are using, you might also be able to make use of Smart Print:
    Downloads and Information:
    HP Printing Software
    Scroll down > look on the right side of the page under Web Page Printing for the HP Smart Print download
    How-To:
    Smart Print Help and FAQ
    Includes: How to update your installed version of Smart Print:
    #6: How do I get the latest version of Smart Print?
    Smart Print updates automatically using the default settings. You can choice to update manually by selecting the "?" on the Smart Print Preview/Print bar located in the upper left corner of Smart Print. Select the Updates tab to get the latest version.
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • We are an inner city youth organization, we purchased 30 emac computers for the kids.we can not get the old password off the accounts page for the internet

    We can't get on to the internet, all the account numbers are correct and it says we are connected, but the last step it wants to get the old password in order for us to open on to the internet. How do we find and remove the old password.
    We can't find the password or get it from the school we received the computer from.

    Go to System Preferences
    Click Network
    Highlight AirPort and click Configure...
    Choose “By default, join: Preferred networks”
    Select your access point and Remove your access point with the minus button.
    Launch your keychain access in Utilities and delete your access point keychain entry.
    Reboot
    Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.
    Instead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. Before I went through network diagnostics and all of that stuff in system preferences, and then I tried the "Join Other Network" method, and now it works like a dream.

Maybe you are looking for

  • Need help on ALV report

    hi, i am new to ALV programming,i awant to generate the report with three teable mseg,mkpf,mard. i need selection screen also. in the selection screen following is the field names. Matdoc number-mseg-mblnr mat number - mseg-matnr plant - mseg-werks s

  • Is creating empty views really necessary?

    I have a view_A (UIView class), and then i create a subview (view_background) using UIImageView, and then add another subview to the master view of a UIWebView style (UIWebView), and then an overlay view to catch touches view_overlay. My question is,

  • DVD-R plays on one machine but not on another

    I have an HDD-DVD recorder, which can burn DVD-R disks. The disks will then play in my 12" PB, but won't play in my iMac - although they did at one time. Putting the disk in results in a repetitive clicking and whirring but the disk does not appear o

  • Inserting data from excel into oracle db

    I have data in excel files. Can I insert it in Oracle DB?? any example will be highly appreciated thanks and kind regards

  • About JBOSS3.0 datasource error!!!!

    develop CMP2.0 ,USE JBuilder7.0+jboss3.0+jdbc_odbc bridge at first I have config correct odbc datasource in WIN2000; this my connection of datasource mysql.xml file; <?xml version="1.0" encoding="UTF-8"?> <!-- ========================================