Loading problems.

Hi All,
In my Production system, i just ran an full upload from source system to BW dso and from dso i triggerred an delta to cube
Now i found that there is no use of this uploads and it disturbed the values in cube.
i have a proposal
1. to delete the datarequest in cube
2. deleting the data mart status in dso and also the request in dso.
is this ok?? will it have an impact on the next loads??
i have a question here tommorow if process chain runs which loads data from Source>dso> cube. it should not fail .
Pls guide me??
Thanks,
V.Singh

Hi
Please go ahead with deletion, follow the below steps
1) delete the data mart status for the request in DSO
2) delete request from CUBE
3) Delete request from DSO
3) delete the same request from PSA
make sure all your inits are not corrupted.
one from source to Data source, one from Data source to DSO, last one from DSO to CUBE.
hope you know how to check init
Regards,
Venkatesh.

Similar Messages

Flat-File Loading problem

Hi Friends,
I am struggling with flat-file loading problem. I am trying to load a .csv file into data target. I took all pre-cautions while loading data. I look into preview and simulate the data. Everything is ok, but when i schedule the data, i found 0 records in the monitor. The following is the STATUS message of the above problem:
   No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
         Can anybody help me what is the problem and procdure to resolve it?
Regards,
Mahesh

Hi Eugene,
Thanks for the quick reply. The following screen-shot tells you the messages of detail tab;
OVER ALL STATUS MISSING WITH MESSAGES OR WARNINGS
REQUEST: MISSING MESSAGES
EXTRACTION
EVERYTHING IS OK
DATA REQUEST RECEIVED
NO DATA AVAILABLE DATA ELECTION ENDED.
PROCESSING
NO DATA
           The above message was shown in details tab. Pls guide me to locate the problem.
Regards,
Mahesh

App keeps loading problem solve

Anyone with an app still loading problem can get rid of it by going into the app store. tap on "updates"- bottem right corner. tap on purchased where you get a list of your downloads then tap on the cloud with the arrow, enter your pin. hit ok for app over 20mb. go back into the app store and to your purchased list and wait for it to reload. once done come out of the app store and hopefully all the loading apps are gone. hope it works for you.

I had this same problem when trying to download some training app. I could not delete or get it to upload completely either. Very frustrating. What I did was plug it into my computer, went to Itunes and searched the same app. I was able to download it here and then it starte to sync with my Iphone. You can remove the app after it finishes the download if u want. Hope this works!

Loader-Problem mit I.Explorer / FireFox ist OK

Die Domain "http://woopi.net"
enthält eine "site", die nur mit Flash generiert wurde.
Teste ich diese "Site" mit Firefox, dann gibt es keine Probleme, alles OK.
Teste ich mit dem Internet-Explorer, dann muß dieser erst lernen mit den LoaderKomponenten umzugehen,
nach dem 2. oder 3. "rollOver" werden dann diese Elemente richtig angezeigt.
Ziel-Beschreibung:
beim Aufruf von "woopi.net" wird auf dem Bildschirm die Bundesrepublik dargestellt.
Ein Klick auf die BRD öffnet ein Navigationsfeld mit 7 Button.
Der Klick auf den Button "Alle Banken in Deutschland" öffnet ein Navigationsfeld, in welchem bei einem RollOver
unten links auf dem Bildschirm ein Bild angezeigt wird, in einer LoaderKomponente.
Der InternetExplorer zeigt diese Bilder falsch an, erst nach dem 2., ev. nach dem 3. RollOver wird das Bild richtig angezeigt.
Unten rechts auf dem Bildschirm gibt es den Zugang zu einem weiteren Navigationsfeld, "WebKatalog 2".
Die Darstellung in diesem Navigationsfenster ist geradezu scheußlich.
Hinweis:
auch die Html-Seiten in denen die Flash-Seiten eingebettet sind, wurden mit Flash-Cs4 generiert.
Es wurden keine ProgrammErweiterungen verwendet.
Wer kennt die Problemlösung?
mfG, Jochen

danke für die Information:
"you have incomplete swf embedding code"
Die Kompelation der html-Datei erfolgt unter Flash automatisch, ich habe leider
"fast keine" html-Kenntnisse, kann also nur laborieren. Können Sie mir einen Hinweis geben ?
cue.fla "wurde kompelliert". Ergebnis:
cue.swf
cue.html
Hier das, was ich vorfand:
<body bgcolor="#e7e7e7">

<a href="./cue/queue2.swf"></a>
<a href="./cue/queue3.swf"></a>
<a href="javascript: end("document.cue");"></a>
<a href="http://www.basiszins.de"></a>
<a href="http://www.onvista.de"></a>


<script language="JavaScript" type="text/javascript">
 AC_FL_RunContent(
Es müßte vielleicht so aussehen:
<body bgcolor="#e7e7e7">

<a href="./cue/queue1.swf"></a> //das Script in cue.swf: loadMovieNum("./cue/queue1.swf", 1);
<a href="./cue/queue2.swf"></a> //d.Script in queue1.swf: on (release){loadMovieNum("./cue/queue2.swf",2);}
 //d.Script in queue2.swf: loadMovieNum("./cue/queue10.swf", 3);
<a href="./cue/queue3.swf"></a> //d.Script in queue1.swf: on (release){loadMovieNum("./cue/queue3.swf",2);}
 //d.Script in queue3.swf: loadMovieNum("./cue/queue30.swf", 3);
<a href="javascript: end("document.cue");"></a>
<a href="http://www.basiszins.de"></a>
<a href="http://www.onvista.de"></a>


<script language="JavaScript" type="text/javascript">
 AC_FL_RunContent(
Das "Loader-Problem" zeigt sich aber schon in der "queue1.swf" Datei, welche nach _level1 geladen wird.
Es wird hier nur Actionscript 2 eingesetzt. Bemerkenswert ist, daß sich Firefox ohne Probleme sehr stabil verhält.
Vielleicht können Sie hiermit etwas anfangen. Wenn ein SreenShoot eine bessere Analyse ermöglicht, schiebe ich ein Bild gerne nach.
mfG. Jochen

XSD Loading problem

I got this error from bpel console .. Can any one please update on this.. Why this this error should occur?.
<messages><input><InvokePlanningOrderRoadshowProducerInputVariable><part name="PlanningOrderRequest" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><PlanningOrderRequest xmlns:ns0="http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder" xmlns="http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder">
<ns0:PlanningOrderHeader>
<ns0:OrderId>10215568</ns0:OrderId>
<ns0:BookingId/>
<ns0:OrderType>Standard</ns0:OrderType>
<ns0:CustomerName>MRS JUNE OCKWELL</ns0:CustomerName>
<ns0:ClientAccountId>EMP</ns0:ClientAccountId>
<ns0:ClientPreAdviceNumber/>
<ns0:Title/>
<ns0:ClientOrderNumber>W3221000-36</ns0:ClientOrderNumber>
<ns0:Latitude>53.526969</ns0:Latitude>
<ns0:Longitude>-2.657221</ns0:Longitude>
<ns0:Street/>
<ns0:HouseNumber>8 Bentinck Street</ns0:HouseNumber>
<ns0:Postcode>WN3 6RB</ns0:Postcode>
<ns0:Town>WIGAN</ns0:Town>
<ns0:Status/>
<ns0:PhoneCallRequired>Y</ns0:PhoneCallRequired>
<ns0:Phone1>01942202596</ns0:Phone1>
<ns0:Phone2>07584651731</ns0:Phone2>
<ns0:SlotPeriodStart/>
<ns0:SlotPeriodEnd/>
<ns0:SlotLength/>
<ns0:StopDuration/>
<ns0:PlanningOrderLines>
<ns0:PlanningOrderLine>
<ns0:OrderLineId>443405</ns0:OrderLineId>
<ns0:OrderId>10215568</ns0:OrderId>
<ns0:ItemNumber>EMP-TC750</ns0:ItemNumber>
<ns0:ItemDescription>RICHMOND KING BED</ns0:ItemDescription>
<ns0:NoOfPieces>03</ns0:NoOfPieces>
<ns0:ServiceString>01000</ns0:ServiceString>
<ns0:ShipsetId>01</ns0:ShipsetId>
<ns0:ClientUPI>009707300553D094</ns0:ClientUPI>
<ns0:OrderLineType>Delivery</ns0:OrderLineType>
<ns0:OrderLineNumber>01</ns0:OrderLineNumber>
<ns0:SpecialInstruction>IF NOT IN GO TO NUMBER 6 FOR KEY</ns0:SpecialInstruction>
<ns0:DeliveryVolume/>
<ns0:DeliveryWeight/>
<ns0:CollectionWeight/>
<ns0:CollectionVolume/>
<ns0:Status>LOADED</ns0:Status>
</ns0:PlanningOrderLine>
</ns0:PlanningOrderLines>
</ns0:PlanningOrderHeader>
</PlanningOrderRequest>
</part></InvokePlanningOrderRoadshowProducerInputVariable></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>file:/SOA2M01/app/oracle/product/10.1.3/bpel/domains/operations/tmp/.bpel_PlanningOrder_1.0_06bcbd311b9a0d44d808edcbcee42770.tmp/PlanningOrderRoadShowProducer.wsdl [ Produce_Message_ptt::Produce_Message(PlanningOrderRequest) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
</summary>
</part><part name="detail"><detail>org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
</detail>
</part></bindingFault></fault></messages>

You remove xmlns:ns0 attribute from PlanningOrderRequest and the prefix ns0: from xsd tags. When you declare xmlns:ns0 means it is looking for that ns0 namespace in the project directory or oracle server global directory.

PSE 12 trial version - loading problems

I have been trying for 3 days to load the 30 day trial of PSE12 on my new computer. My computer is loaded with Windows 8. I have encountered problems over and over again with loading PSE12, but never the same problem.
For example: after one download the start menu would open but it wouldn't go to the organizer or editor. So I deleted that program and re-loaded it BUT -
then , it went straight to the organizer - and froze, so I clicked out - tried to click back in, and NOTHING> >> not even the start menu.
THIS IS SOOO FRUSTRATING! Makes me really second guess whether I should purchase this or not
Please help!!!

I think it said error 101, but not totally sure that I recall it
correctly. I deleted everything and reinstalled and then it worked.
Haldis
In a message dated 12/31/2013 11:27:15 A.M. Pacific Standard Time,
[email protected] writes:
Re: PSE 12 trial version - loading problems
created by Jeff A Wright (http://forums.adobe.com/people/JeffAWright)
in Trial Download & Install - View the full discussion
(http://forums.adobe.com/message/5969733#5969733)

Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
The view stops after a while and only the Loading… (icon) can be seen on the page.
Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
Test the html5 version of this project at: http://kurs.dokker.no/captivate/
and see for yourself what happends.

I changed the Preferences/Project/Start and End Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
stopped like before on one of the first slides, loading… screen like before in IE11.
In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
In Opera 23.0 sound was missing and else working as bad as IE.
All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

Flex 1.5 loader problem

Hi previous we wore having some loader problem. Now it is
cleared. but now our problem is,
In our home page, we are having one loader. In to that we
are loading our applicaions by clicking different links. It was
also fine. By clicking But1 we will get app1 in our loader. By
clicking But2 we will get app2 in our loader. Up to now OK. But
when i click the But1 again, we are able to load app1 but the
cursor is not stopping with its clock symbol. This is become a very
big problem for us. Can anybody know how to recover tis. I am
attacing my sample code.
<mx:GridItem horizontalAlign="center"
vScrollPolicy="off">
<mx:Loader id="mainpage_content_loader" width="700"
horizontalAlign="center" showBusyCursor="false" />
</mx:GridItem>
.as file:
function f1()
//getURL("../growthchart/userchart.mxml");
mainpage_content_loader.width="700";
mainpage_content_loader.height="2500";
mainpage_content_loader.contentPath = app1.mxml.swf";
function f2()
mainpage_content_loader.width="700";
mainpage_content_loader.height="500";
mainpage_content_loader.contentPath = "app2.mxml.swf";
function f3()
mainpage_content_loader.width="700";
mainpage_content_loader.height="500";
mainpage_content_loader.contentPath = "app3.mxml.swf";
Thanks

With the free developer's license, all swfs generated by Flex
will expire in 24 hours.
You can put the Flex server (developer's license) on the
network server. It is limited to the first 5 IP addresses that hit
the site until you restart the Flex server.
Tracy

Mail loading problem

Hi all
I've got this mail loading problem,
whenever the mail is loading I always scroll down to read the text first
but it always to back to the top, I scroll down again it scroll back up.
this happen only during the images are loading.
it is very annoying, though it might be fix in 10.5.7
but it was not.
any plan to solve this?

I have the same problem. Did you get any answers?

Macbook Pro/Mozilla Firefox --Page Loading Problems

I experience 'page loading' problems when going from one page to another. Sometimes the page takes a long time to load. Sometimes it times out and never does load.
Does anyone else with this combination of laptop and browser experience these problems? Any suggestions for overcoming this lag?

I know OS X used to have some problems with the way some routers do DNS. There was this topic a while ago:
http://forums.verizon.com/t5/FiOS-Internet/DL-page-load-speed-great-but-browser-quot-looking-up-quot...
For our Mac we had to set the router to send external IP addresses of a DNS system (either verizon's or something like OpenDNS which we use).
You could manually change the DNS settings on the Mac to see if that fixes the problem and then you could mac the change the settings at the router level if you like.

IMac, sudden extremely slow webpage loading problem

Hi guys,
I had this problem all of a sudden, not sure whether it was caused by malware, my own python scripts or the 10.8.2 update. However all the other devices in my wifi network work just fine. And also my iMac is not disconnected from the internet, ping "www.google.com" is fine, and other IM apps are working properly too.
I tried different browswers (chrome, firefox, safari) since then, and all the other suggested solutions (resetting DNS, using static ip address, clear cache and etc.) None of them actually solved the problem.
My friend told me to reinstall a clean OS X, which could be a huge pain for me.
However, I accidently found out some softlinks and permissions are messed up in my superuser directories. So I did a "repair disk permission" , now the browsers are back on the horse. That actually makes sense to me.
Long story short, verify/repair disk permissions (in Utilities/disk utility) might solve your browser page loading problem! I just wanna to share with you guys if you are struggling on the same issue as I was.
Regards,
candyquicksort

Thanks for the report & sharing!

Safari page load problems and 10.5.3

Since I have upgraded to 10.5.3, I am experiencing Safari page load problems on all my user accounts on my 2.0 GHz Core Duo Black MacBook. I have reviewed threads in this forum and that of the Safari forum with no solution that solves the problem. so I post here in hopes of additional expert solution ideas.
*The Problem:* Since upgrading to 10.5.3 Safari fails to complete page downloads for some, but not all websites. When these same websites are accessed with Firefox there is no problem. With Safari the page load will stop at about 75% completion, or the page will not load at all.
Here is an example of a webpage that will not complete: http://www.realclearpolitics.com/
Here is an example of a webpage that will not load at all: http://cherylsguitar.com/site (my wife's business)
I also have a G4 iMac running 10.4.11 on the same WiFi network that does NOT experience the Safari page load problems. All is good and speedy on this trusty machine.
*Solutions Attempted:*
- Deleted plist (with no effect)
- Re-installed Safari from Leopard disk (with no effect)
- Scoured User Preferences in Library for offending applications, plug-ins, etc.
- Reset PRAM
- Reset and examined cable modem and router (AirPort Extreme 802.11g)
*Hardware and Network info:*
- 2.0 GHz Core Duo Black MacBook
- 2 GB Ram
- AirPort Extreme Base Station (generation 1) running 802.11g

Allan Eckert wrote:
Hi Perry Lehman;
Have you cleared out your cookies?
Allan
Allan,
Yes. I have reset Safari clearing all but website icons with no effect. I also tried turning of the Safari pop-up blocker with some very limited success. Disabling pop-up blocker will marginally help page load speed for some websites, but others still fail to load at all.
Thanks for taking time to post.

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery args.get_isPartialLoad().
My page is loaded into a palcehold within the Ajax update panel within the current Masterpage, so page loadload doesn't occur. But if my Muse page can capture the partial pageload then I can tell jquery to run the Muse formating routine.

Jackie, I am having the same issue and agree that it obscures our site analytics.
I only have the "WebMarketing" subscription - so I cannot see how often people visit my site (unless I just dont know how to view that). Here is a screen shot of how many different locations I have and how much it affects my site visitor count based on the other locations which seem "legit" because they have more page views than visits.
I hope there is a way to fix or block this.

Xlm loading problem

I have what I think is a loading problem but it might be
something else. I get the mp3 file listed in the xml to play but
none of the other info in the xml display. I have song titles &
band info that is not appearing. I didn't realize this at first
because if the mp3's had info already attached that was showing up
in my display. I now realize that that info was not coming from my
file.
I am a total newbie at this so any help appreciated .
(I think that I've added all potentially relevant
code)

I have what I think is a loading problem but it might be
something else. I get the mp3 file listed in the xml to play but
none of the other info in the xml display. I have song titles &
band info that is not appearing. I didn't realize this at first
because if the mp3's had info already attached that was showing up
in my display. I now realize that that info was not coming from my
file.
I am a total newbie at this so any help appreciated .
(I think that I've added all potentially relevant
code)

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Little circle turns/ page doesn't load/ problem triangle comes up almost all the time

The little connecting circle comes on and turns no matter what -- whether it's from a bookmark, an email, a typed in address. It turns and turns, then either times out or says problem loading page ALMOST all the time (I can't figure our why or why not). I just downloaded the latest versions of both Firefox & Thunderbird. I check my AVG and Firefox has a clear pass.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Loading problems.

Similar Messages

Maybe you are looking for