Loading profit center hierarchy into 0plant
Hi,
I need to load 0proft_ctr hierarchy into 0plant. Can anyone please give me step by step solution ?
I have generated export datsource for 0profit_ctr.
Then I am creating transfer rules on exported datsource with 0plant. Here what infosource & datasource I have to assign ? profit center hierarchy datasource is not available.
Pleasse tell me if I am wrong and give me step by step solution.
Gud points will be provided.
this will help http://forums.sdn.sap.com/thread.jspa?threadID=1551111
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c08b1f70-6fb1-2b10-97a5-df4c503e03cb?QuickLink=index&overridelayout=true
http://forums.sdn.sap.com/thread.jspa?threadID=1362783
Similar Messages
-
How to load Profit Center hierarchy from R3 to BW
Hi people,
Sorry, but I already saw some documentations here and I couldn´t solve my problem.
I need to load Profit Center Hierarchy from R3 to BW.
I already have the InfoSource 0PROFIT_CTR activated and I would like to know what are the steps to load the "Standard Hierarchy" that we have in the transaction KCH6N in R3.
I tried to create the Infopackage based on 0PROFIT_CTR_HIER and when I tryed to schedule, the system asked me the file name to put in the "external data", but I don´t have file to load, I need to load de hierarchy directly from R3.
Help me please,
Thanks,
Rosana.U have to activate datasource 0PROFIT_CTR_0106_HIER in R/3 system and replicate that to BW.
And u should install standard transfer rules (0PROFIT_CTR_0106_HIER from BI CONTENT) in BW system.
Create infopackage to load hierarchy.. In Infopackage properties, 'Hierarchy Selection' tab, click 'Available Hierarchies from OLTP' and select ur profit center hierarchy.
There is no difference loading hierarchy data in BW 3.5 and BI 7.0 -
How do I create a BW hierarchy from an R/3 profit center hierarchy?
I am trying to create a profit center hierarchy in BW using a profit center hierarchy from R/3. I know there is a way to do this, I just can't find the way.
Thank you for your help.Hi Aaron,
you have to activate the specific datasource 0PROFIT_CTR_0106_HIER in R/3 transaction RSA5. After doing this, replicate your source system in BW anf then assign the datasource to 0PROFIT_CTR infosource, create an infopackage and finally load your hierarchies !
Hope it helps (and don't forget to assign some points by clickin'on the star to the contributors that will help you !).
Bye,
Roberto -
Profit center hierarchy and cost center hierarchy
Hi
What are the things we have to consider to create Profit center hierarchy and cost center hierarchy and what is the need to assign profit center hierarchy to profit center and cost center hierarchy to cost center. What levels does this fall into? Can some one please guide me.
Thanks.As you would for any other infoobject
Activate the business content hierarchy datasources on R3 for cost centre and profit centre
Go into BW - replicate the metadata
Then just connect via transformations or transfer rules the datasources to yoru infosources or master data objects
Create an infopackage per hierarchy!!!!! - press the button available hirachies from OLTP - click the one you want on the left - fire it off
Then repeat new infopackages for all hierachies -
Profit Center Hierarchy Process Chain fails
Hello Friends,
I have Profit Center Hierarchy load using Process Chain daily. Last night it failed. The log says : Saving Hierarchy Month 00 is not plausible. Does anyone have any idea about it.
joseHi Jose,
seems that one of yourinfoapckages seems to have a logic for naming the hierarchy where the previous month is calculated. This logic seems to fail for january.
Regards,
Juergen -
I was getting data load error while loading profit center in BCS
Hi,
I was getting error message while i was loading profit center master data.The error message is the total 6 records were readed from the file 6 records contain parameter setting exceeded the user limitation of execution the data collection task"
Just i want to load Profit center into BCS.I have create method master data upload,where i have specified fields layout as below
Header
Controling area
Fiscal Year
Posting Period
Data Row
Profit Cneter
When i execute Flexible upload and method where i was getting error message saying the 6 recors are ignored
My flat files is in this format
Controling area fiscal year posting period
2000 2008 8
50030
50035
50040
50045
50050
50055
Please some one advise me how to load it into BCS.
Its urgent requirment and i appreciate your solutions
Edited by: Prasad B on Oct 22, 2008 7:42 PMThanks alot Dan and Eugene.
I was following Eugene Blog for flexible update master data.I have create the way you have specififed in the document.
I have created Method to upload Profit center and try to load the data where i am getting error.
I am loading attributes,but not hierachy.I am not understanding why i am not able to load flat file profit center master data into BCS.
The error is "
7 of 7 data rows were ignored
Message no. UCF7017
Diagnosis
A total of 7 data records were read from file C:\Documents and
Settings\Laxmikant.dube\Desktop\P. Of those, 7 records contain parameter
settings that exceed the user limitations for executing the data
collection task.
System response
The ignored records were not checked any further and will not be
written.
Procedure
Make sure that the ignored records are irrelevant for the current task.
If some of the ignored records were supposed to be written, then the
file probably contains an error.
In this case, closely examine the settings for the fields Version,
Fiscal Year, Period, Group Currency, and Consolidation Units in the
file.
If you have more than one characteristic with the role consolidation
unit (a socalled "matrix organization"), also check whether the settings
in the ignored records refer to valid combinations of consolidation
units.
Character string "2000,2008,8" is cut off after 4 characters
Message no. UCF7003
Diagnosis
The current data row contains for characteristic Controlling area the
value 2000,2008,8. But the maximum length for values of this
characteristic is only 4 characters.
System response
The character string "2000,2008,8" is cut off after 4 characters.
Procedure
Check if the string "2000,2008,8" is indeed supposed to be interpreted
as the value of characteristic Controlling area. If this is the case,
avoid exceeding the maximum length for this characteristic.
However, if there has been a mix-up, compare the structure of the file
with the definition in the upload method. If variable column widths are
used, particularly pay attention to the number of field separators in
the data row involved.
Please advise me on this.It would be great help -
Profit Center Hierarchy is not updating in Variable
HI Guru's,
Profit Center Hierarchy is not updating in Variable .
We have 3 new profit center added of which i have updated the master data ie, attr, txt, and hierarchy and Txn data. Where after updating i can find the thing updated but when i execute the report in the variable i dont find the updated profit center.
Please guide
PrasadBut just to update you that we don't have data for the new profit centerin R3. Is it because of this i don't find the new profit centers in
Variable screen ( though i can see in Query Designer)
Please guide -
RE: Profit center hierarchy
Hi Guru's
Can any one explain to me about Profit Center hierarchy, Where to create that one, where i need to activate, I'm trying to create Tcode KCH1, KCH5N.
-Please explain to me breifly, urgent.
- Points will assing,
thanks
venkat.Hi Venkat
You have to first assign the name of the Profit Center Standard Hierarchy in OKE5. Then come to KCH1 and create the standard hierarchy with the same name that you have given in OKE5. If it helps, plz assign points.
Regards
Rajaram -
Profit Center Hierarchy Level in ABAP-HR
I am working on an ABAP-HR report related to Organisation management.
There is a requirement wherein I need to retrieve data from a Profit Center Hierarchy Level .Can u please advice me on this.
Thanks in advance,
Raja.Hi ,
(i_name is the entered profit center group name)
Get the internal name of the entered profit center hierarchy.
CALL FUNCTION 'G_SET_LIST_SELECT'
EXPORTING
SETCLASS = '0106'
SHORTNAME = I_NAME
KOKRS = 'MIT '
KTOPL = 'HEUS'
TABLES
MATCHING_SETS = T_SETLIST.
IF T_SETLIST[] IS INITIAL.
MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
EXIT.
ELSE.
READ TABLE T_SETLIST INDEX 1.
ENDIF.
Get the entered profit center hierarchy info.
CALL FUNCTION 'G_SET_TREE_IMPORT'
EXPORTING
SETID = T_SETLIST-SETNAME
TABLES
SET_HIERARCHY = T_SETHIER
SET_VALUES = T_SETVALUES
EXCEPTIONS
SET_NOT_FOUND = 1
ILLEGAL_FIELD_REPLACEMENT = 2
ILLEGAL_TABLE_REPLACEMENT = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
EXIT.
ENDIF.
or try one of these
FC_PRCTR_HIERARCHY
TXW_EXTRACT_CO_PCTR_HIERARCHY
Regards,
pankaj singh.
Message edited by pankaj singh -
Copy cost center hierarchy to profit center hierarchy: is this possible?
Hi,
I would like to know or I can copy my standard cost center hierarchy to my standard profit center hierarchy. If so, how to proceed?
Thank you in advance,
Eric van Zundert.
Ps. We do not have enterprise organisastional active.Hi Eric,
No standard tool exists for this operation. However, if you really prefer to do it manually, you can pull a trick. You can export your cost centre hierarchy to TXT file, correct there certain parameters (change BCCSS to BGLPCT, etc.) and then import it as profit centre hierarchy.
Regards,
Eli -
Structure view "Profit center hierarchy" for Information system
Hi Experts
The structure view "Profit center hierarchy" is not available in standard system. I have created a new key with assignement of PS Hierarchy type '2'.
But iam getting below message when I use this new structure view:
Alternative hierarchy could not be determined
Message no. OK032
Diagnosis
You attempted to structure your project elements according to an alternative hierarchy (profit center, cost center or summarization hierarchy). The alternative hierarchy could not be read.
System Response
The system uses the "Work breakdown structure" view.
Any suggestion?
warm regards
ramSivaOk lets start from basics
go to CN41 and enter a project with std PS info profile 000000000000001
if you click o the DB profile you will have basic setting 000000000000001 etc
this gives us the project structure
Now in transaction OPUR create a view for PC hierarchy
Z00000000001 - whatever description
select PS hier type 2 - Profit Ctr via set
I think you have done this
In this configuration there is a group name - you need to enter the profit centre hierarchy group name from your system
this group must exist in your system check using transaction KCH3 to display group - if this is not entered correctly you will get the exact error you have got - I have been able to replicate in my system
Now run CN41 change DB profile project view from 00000000001 to Z0000000001 -
Need profit center HIERARCHY FM
Hello Experts,
I know the profit center and profit center group. Could you tell me which function module i have to use to get the complete hierarchy?
Regards,
AmitHi,
<i>(i_name is the entered profit center group name)</i>
Get the internal name of the entered profit center hierarchy.
CALL FUNCTION 'G_SET_LIST_SELECT'
EXPORTING
SETCLASS = '0106'
SHORTNAME = I_NAME
KOKRS = 'MIT '
KTOPL = 'HEUS'
TABLES
MATCHING_SETS = T_SETLIST.
IF T_SETLIST[] IS INITIAL.
MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
EXIT.
ELSE.
READ TABLE T_SETLIST INDEX 1.
ENDIF.
<i>
Get the entered profit center hierarchy info.</i>
CALL FUNCTION 'G_SET_TREE_IMPORT'
EXPORTING
SETID = T_SETLIST-SETNAME
TABLES
SET_HIERARCHY = T_SETHIER
SET_VALUES = T_SETVALUES
EXCEPTIONS
SET_NOT_FOUND = 1
ILLEGAL_FIELD_REPLACEMENT = 2
ILLEGAL_TABLE_REPLACEMENT = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
EXIT.
ENDIF.
Regards
Sudheer -
Alternate profit center hierarchy
Hi All
How to maintain alternate profit center hierarchy ?Hi ,
While maintaining controlling area in OKKP in right bottom there are two tick boxes for Cost center and Profit center.Click on that .While creating standard hierarchy sytem will create alternate hierarchy side by side.
Thanks & Regards
Deepa -
Profit Center Hierarchy Maintenance
Hello
As part of a project we need to transfer an existing Profit Center Hierarchy (including all Profit Center groups and Profit Centers) to a different Controlling Area. The hierarchy in question contains over 2500 Profit Centers and we would like to avoid doing this manually, to reduce both time and margin for error.
We know that we can use KCH1 to copy the Profit Center Groups to the new Controlling Area, using the original Controlling Area as a reference, but this does not copy across the Profit Centers master data.
Master Data transaction KE55, does not allow Controlling Area to be amended.
Questions:
- Is there a way to transfer/copy the complete hierarchy (including Profit Centers) to a different Controlling Area?
If we use KCH1 - how can we copy/reassign the Profit Centers to the new Controlling Area?
Any ideas for this would be greatly appreciated
ThanksHi
It can not be fully the way you like...
You can go to KCH4 and select your Prof Ctr Hie.. Click on Extras > Export... This would create a text file...
Create Std Hie with same name in new contr area and SAVE.. Then click on Extras > Import.... This would create the Hie Structure and also the profit center names under it.. But, as such the Prof Ctrs wont be created...
You need to create them again using KE51... Ideal way would be to create it using reference of the same profit center (LSMW)
Regards
Ajay M -
Profit Center Hierarchy Error - profit center hierarchy not defined
in Quality client QA
0ke5, the configuration settings is not transfered from DEV through transport request.
now i have created the Profit Center Hierarchy and started process testing. Now i try to assign the hierarchy in 0ke5, error message standard hierarchy not defined in controlling area XXX.
I also try to define the Dummy Profit Center KE59, but error comes profit center hierarchy not defined.
also note that 0ke5 and 1kef are blank.try to re-transport PCA
IMG; CO--> PCA --> tools --> transaport customizing set. -->
but i believe if you transport only the "master data" Q will function fine. ( try OKEQ first)
Maybe you are looking for
-
After receiving an error when I try to install the latest update of OS-X, I took my laptop to oour schools IT dept. They tried to run the update in safe mode and then they got an error saying the system could not find the hard drive. Now they want to
-
Open images in Express from a mac?
How do I open images from a mac? Do they need to be in the "Camera Roll" folder on the Ipad Air (7)? Thanks, Qwerky
-
Access 2010 InfoPath Data Collection Export Fails Due to Date Format That Includes Time Zone
I created an Access 2010 database that has multiple data collection (InfoPath) forms that were generated from Access and have been in use for about 1.5 years. Starting in 2013 (for about a week now), the submitted data fails to Export due to a "data
-
Auto update of OC4J xml configuration files with JDev
When using JDeveloper with source control (such as ClearCase), Is there a way to configure JDev to prompt the user to check-out the ejb-jar.xml, orion-ejb-jar.xml, web.xml, or application.xml files when JDev needs to update them but finds them to be
-
my app store is not responding