Loading relational dimension into AW

Hi, I'm trying to create my first AW from a relational model (using the AW wizard). I actually sent the script to a file so I could run things manually to see where the problem is.
Everything works fine for populating the first 4 dimensions, all of which are pretty small (< 300 members each).
However, when I get to the "ownership" dimension, which has about 250,000 members in it, the session just seems to hang on the following call:
execute DBMS_AWM.REFRESH_AWDIMENSION('POWELS10', 'RMGMT', 'RMGMT1OWNERSHIP', 'TESTFri Oct 15 15:34:22 EDT 2004');
This has been running for at least an hour. Is that typical performance? I remember Express being MUCH faster than this - what can be happening?
Thanks,
Scott
p.s. I'm not sure how to even debug this, there doesn't seem to be a log file like the Express Administrator data loads used to generate to show how much data has been read. About the only thing I've been able to find was the v$aw_calc view, which shows these statistics:
aggregate cache hits / misses: 0 / 0
session cache hits / misses: 0 / 0
pool hits / misses: 39,658,051 / 1,130,980
pool new pages: 1,132,276
pool reclaimed pages: 0
cache writes: 1,150
pool size: 2,048
Why has a simple dimension load generated almost 40 million hits against the pool?
Thanks!
Scott

Hi John,
Yes, i am trying to load "Saved Assumption" against the UDA column. I tried using one more column with Account_Type specifying as "Saved Assumption". Here i need to have the UDA also as "Saved Assumption". But the error result was same.
Cannot load dimension member, error message is: java.lang.RuntimeException: The specified UDA "Saved Assumption" is not defined.
I would like to communicate few more as per my requirement;
1. I have created the Single currency application, which was fine.
2. By default i have Account, Period, Year, Scenario, Entity, Version. Later i added custom dimensions like BU, Product in Planning.
3. First dimension (with members) which i was trying to load was Account.
When i reversed the planning application in ODI models. I got one additional Column called UDA which is not in the dimension liast. If i would require UDA's to be added to the account, do i need to define the required UDA's using ODI to Planning? If so, can you please guide me?
Thanks
Damodhar Reddy

Similar Messages

Can't we load all dimensions using HAL

<p>Hi</p><p>i am using Hyperion Application Link to load members into mydimesions.</p><p>i was successfull in loading accounts. but when i tried toloading scenerios, i was not able to do that as my planning adapterdon't have that dimension in the drop down. i tried refresh , butnothing happened.</p><p>can't we load all dimensions into planning using HAL?</p><p>thanks in advance.</p><p> </p><p>-Balu</p><p> </p>

<p>Hello,</p><p> </p><p>Four dimensions which are Entity, Accounts, scenario &Versions are self generated in Planning.</p><p> </p><p>However we cannot use HAL for Scenarios and Versions.</p><p> </p><p>Hyperguy</p>

Unable to load Dimension into Hyperion planning using ODI ?

Hi All
We are trying to load Dimension into hyperion planning Ver. 11.1.2 using ODI. We have created the interface and mapped the source csv file to target planmning application using ODI KM.
LKM file to SQL
IKM SQL to Planning
We get success in ODI's Operator but the Dimension is not updated nor new data is insreted.
We get this message in Error file:-
+
Retail Format,Parent,Alias: Default,Data Storage,Two Pass Calculation,Smart List,Data Type,Plan Type (APlan),Error_Reason
ABC,Total Format,,StoreData,,,,Aplan,Cannot load dimension member, error message is: java.lang.RuntimeException: Fetch of saved member "ABC" failed.
+
We get this message in log files:-
+
2010-07-22 07:04:06,550 INFO [DwgCmdExecutionThread]: Oracle Data Integrator Adapter for Hyperion Planning - Release 9.3.1.1
2010-07-22 07:04:06,550 INFO [DwgCmdExecutionThread]: Connecting to planning application [******] on [********]:[11333] using username [admin].
2010-07-22 07:04:06,597 INFO [DwgCmdExecutionThread]: Successfully connected to the planning application.
2010-07-22 07:04:06,597 INFO [DwgCmdExecutionThread]: The load options for the planning load are
     Dimension Name: Retail Format Sort Parent Child : false
     Load Order By Input : false
     Refresh Database : true
2010-07-22 07:04:06,612 INFO [DwgCmdExecutionThread]: Begining the load process.
2010-07-22 07:04:06,612 DEBUG [DwgCmdExecutionThread]: Number of columns in the source result set does not match the number of planning target columns.
2010-07-22 07:04:06,659 INFO [DwgCmdExecutionThread]: Load type is [Load dimension member].
2010-07-22 07:04:06,675 ERROR [DwgCmdExecutionThread]: Record [[ABC, Total Format, null, null, StoreData, null, null, null, null, null, null, null, null, null, Aplan, null, null, null]] was rejected by the Planning Server.
2010-07-22 07:04:06,675 INFO [DwgCmdExecutionThread]: Planing cube refresh operation initiated.
2010-07-22 07:04:08,425 INFO [DwgCmdExecutionThread]: Planning cube refresh operation completed successfully.
2010-07-22 07:04:08,425 INFO [DwgCmdExecutionThread]: Load process completed.
+
Please help out .....

Can you check the error log file as you have posted the log file, it should give more information to why the records were rejected.
Cheers
John
http://john-goodwin.blogspot.com/

Error while loading valid, schema-related document into xdb

Hi Mark.
I tried to load other xml documents (ftp://ftp.tigr.org/pub/data/a_thaliana/ath1/PSEUDOCHROMOSOMES/) into the xdb.
The documents are related to the same schema as the documents i used until now.
I had to change the schema a bit. Three elements (protein_sequence, cds_sequence, transcript_sequence) are now stored as CLOB instead of VARCHAR2.
My first idea was, that the new documents are not valid, but they are.
The old documents still work. I get an ORA-00600 everytime.
I tried to get some information from the trace file but this did not help really.
I don't believe this will help you but i post it anyway:
Dump file d:\oracle\admin\pdw\udump\pdw_s000_6388.trc
Mon Jan 02 09:21:36 2006
ORACLE V9.2.0.7.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.0 Service Pack 4, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Windows 2000 Version 5.0 Service Pack 4, CPU type 586
Instance name: pdw
Redo thread mounted by this instance: 1
Oracle process number: 10
Windows thread id: 6388, image: ORACLE.EXE
*** 2006-01-02 09:21:36.218
*** SESSION ID:(23.9078) 2006-01-02 09:21:36.187
QMHD escaped text too long: dstlen=0 dstbuf=/
QMHD escaped text too long: dstlen=0 dstbuf=home
QMHD escaped text too long: dstlen=0 dstbuf=public
QMHD escaped text too long: dstlen=0 dstbuf=sys
QMHD escaped text too long: dstlen=0 dstbuf=xdbconfig.xml
QMHD escaped text too long: dstlen=0 dstbuf=/
QMHD escaped text too long: dstlen=0 dstbuf=home
QMHD escaped text too long: dstlen=0 dstbuf=public
QMHD escaped text too long: dstlen=0 dstbuf=sys
QMHD escaped text too long: dstlen=0 dstbuf=xdbconfig.xml
QMHD escaped text too long: dstlen=0 dstbuf=home
QMHD escaped text too long: dstlen=0 dstbuf=RSCHULZE
QMHD escaped text too long: dstlen=0 dstbuf=PDV70
QMHD escaped text too long: dstlen=0 dstbuf=SCOTT
QMHD escaped text too long: dstlen=0 dstbuf=SCOTT1
QMHD escaped text too long: dstlen=0 dstbuf=SCOTT2
QMHD escaped text too long: dstlen=0 dstbuf=hbachman
QMHD escaped text too long: dstlen=0 dstbuf=pdw_biowh31
QMHD escaped text too long: dstlen=0 dstbuf=pdw_stage
QMHD escaped text too long: dstlen=0 dstbuf=pdw_tigr_chromosome
QMHD escaped text too long: dstlen=0 dstbuf=uniprot
QMHD escaped text too long: dstlen=0 dstbuf=pdw_tigr_chromosome
QMHD escaped text too long: dstlen=0 dstbuf=data
QMHD escaped text too long: dstlen=0 dstbuf=xsd
QMHD escaped text too long: dstlen=0 dstbuf=data
QMHD escaped text too long: dstlen=0 dstbuf=seq1.txt
QMHD escaped text too long: dstlen=0 dstbuf=seq2.txt
QMHD escaped text too long: dstlen=0 dstbuf=seq3.txt
QMHD escaped text too long: dstlen=0 dstbuf=seq4.txt
QMHD escaped text too long: dstlen=0 dstbuf=seq5.txt
*** 2006-01-02 09:36:57.421
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [kokbgcip1], [196609], [63], [], [], [], [], []
Current SQL statement for this session:
INSERT /*+ NO_REF_CASCADE */ INTO "PDW_TIGR_CHROMOSOME"."SYS_NT0upV7+xbRnu3KquZIaRFgQ=="("NESTED_TABLE_ID","ARRAY_INDEX","SYS_NC_ROWINFO$") VALUES(:1,:2,:3)
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedmp+327          CALLrel ksedst+0
ksfdmp.108+14       CALLrel ksedmp+0 3
_kgerinv+131         CALLreg 00000000             D3E4368 3
kgeasnmierr+19      CALLrel kgerinv+0 D3E4368 4BE2A94 1AF86D4 2
4B56B40
kokbgcip+343        CALLrel kgeasnmierr+0 D3E4368 4BE2A94 1AF86D4 2 4
30001 4 3F
qerocImageIterStar CALLrel kokbgcip+0
t+160
qerocStart+265      CALLrel qerocImageIterStar 237701B4 D3E41E0
t+0
_kokbint+242         CALL??? 00000000             81DFD20 1
kokbeva+338         CALLrel kokbint+0 237700B8 237700FC
..1.42_2.filter.9+1 CALLreg 00000000 D3E41E0
101
insolev.73+164      CALLrel evaopn2+0 237700B8
insbrp.73+1558      CALLrel insolev.73+0 2374A8B4 81DDFF8 1
insrow+173          CALLrel insbrp.73+0
insdrv.73+1302      CALLrel insrow+0 81DDFF8 4B584E4 0
..1.6_1.filter.73+2 CALLrel _insdrv.73+0         81DDFF8
28
..1.5_2.except.29+1 CALLrel _insexe+0            2374A8B4 4B58730
6740
..1.2_1.filter.25+3 CALLrel _opiexe+0            4 3 4B58B24
347
opikpr+512          CALLrel opiall0+0 65 22 4B58D20 0 0 4B58DB8 9C
20 0 0 0 0 0
..1.1_1.filter.34+1 CALLreg 00000000 65 14 4B59980
356
rpidrus.43+167      CALLrel opiodr+0 65 14 4B59980 0
_skgmstack+113       CALLreg 00000000             4B590A0
rpidru+109          CALLrel skgmstack+0 4B590B8 D3E41F0 F618 59941C
4B590A0
_rpiswu2+839         CALLreg 00000000             4B59498
kprball+1537        CALLrel rpiswu2+0 1EA8DD18 102 4B59414 4
1E833D34 102 4B59414 0 59932C
5991DC 4B59498 8
kokbint+1766        CALLrel kprball+0 4B59980 500
kokbeva+338         CALLrel kokbint+0 2374E498 2374E4DC
..1.42_2.filter.9+1 CALLreg 00000000 D3E41E0
101
insolev.73+164      CALLrel evaopn2+0 2374E498
insbrp.73+1558      CALLrel insolev.73+0 25EC7468 7D0BD90 1
insrow+173          CALLrel insbrp.73+0
insdrv.73+1302      CALLrel insrow+0 7D0BD90 4B5AD78 0
..1.6_1.filter.73+2 CALLrel _insdrv.73+0         7D0BD90
28
..1.5_2.except.29+1 CALLrel _insexe+0            25EC7468 4B5AFC4
6740
..1.2_1.filter.25+3 CALLrel _opiexe+0            4 3 4B5B3B8
347
opikpr+512          CALLrel opiall0+0 65 22 4B5B5B4 0 0 4B5B64C 77
20 0 0 0 0 0
..1.1_1.filter.34+1 CALLreg 00000000 65 14 4B5BE70
356
rpidrus.43+167      CALLrel opiodr+0 65 14 4B5BE70 0
_skgmstack+113       CALLreg 00000000             4B5B934
rpidru+109          CALLrel skgmstack+0 4B5B94C D3E41F0 F618 59941C
4B5B934
_rpiswu2+839         CALLreg 00000000             4B5BD2C
kprball+1537        CALLrel rpiswu2+0 1EA8DD18 102 1EA891BC 4
1E833D34 102 1EA8923C 0
59932C 5991DC 4B5BD2C 9
qmskInsertXmlType+ CALLrel kprball+0 4B5BE70 180
1203
qmskStoreXobWithIm CALLrel qmskInsertXmlType+
age+526 0
qmskStoreXob+16     CALLrel qmskStoreXobWithIm
age+0
qmskFlushXob+22     CALLrel qmskStoreXob+0 4BFCFCC 4BE6698 0
_qmeSaveContents+44 CALLreg 00000000
6
qmePreSave+2417     CALLrel qmeSaveContents+0 4BFE790 2 1
_qmtEventFire+259    CALLreg 00000000             D3E4368 3 4BFE8B0
qmxiWriteXobToImag CALLrel qmtEventFire+0 D3E4368 3 4BFE8B0
eInternal+60
qmxiWriteXobToImag CALLrel qmxiWriteXobToImag D3E4368 4B5D418 0 4BFE8B0
eWithHeap+82 eInternal+0 700ECBC 4B5D398 4B5D364
4B5D384 60A09FC 4B5C37C 0 6
D3E4368 C 4B5D418
qmxtgGetOpqImageFr CALLrel qmxiWriteXobToImag D3E4368 4B5D418 0 4BFE8B0
omXob+430 eWithHeap+0 700ECBC 4B5D398 4B5D364
4B5D384 4B5D470 C 6 700ECF8
4B5D418
qmskStoreXobWithIm CALLrel qmxtgGetOpqImageFr
age+370 omXob+0
qmskStoreXob+16     CALLrel qmskStoreXobWithIm
age+0
qmskFlushXob+22     CALLrel qmskStoreXob+0 4BFE8B0 4BFF740 4B5D6FC
_qmeInsertResRow+22 CALLreg 00000000
5
qmeInsertRes+1831   CALLrel qmeInsertResRow+0
qmeLinkInternal+47 CALLrel qmeInsertRes+0
12
qmeCreOrBindRes+33 CALLrel qmeLinkInternal+0 4BFE790 60A5D14 1DFE0323 1D 0
1 1 0 4B5D7A0 4B5D85C 0 0
qmeCreateRes+115    CALLrel qmeCreOrBindRes+0 4BFE790 60A5D14 1DFE0304 1F
1DFE0323 1D 0 1 0 4B5D85C 0 0
4B5D85C 0
qmeuCreateOrUpdate CALLrel qmeCreateRes+0 4BFE790 1DFE0304 1F 1DFE0323
Res+2232 1D 0 0 0
qmhput+393 CALLrel _qmeuCreateOrUpdate
Res+0
_qmhProcessRequestD CALLreg 00000000             1DFE4398
ata+2576
qmpsrun+1220 CALL??? 00000000
opitsk+838          CALLrel qmps_run+0 D3E4368
opiino+698          CALLrel opitsk+0 0 0 D3EA5C8 278A650 3 0
..1.1_1.filter.34+1 CALLreg 00000000 3C 4 4B5F448
356
opirip+662          CALLrel opiodr+0 3C 4 4B5F448 0
opidrv+654          CALLrel opirip+0 32 0 0
sou2o+25            CALLrel opidrv+0
opimai+336          CALLrel sou2o+0 4B5FE1C 32 0 0
BackgroundThreadSt CALLrel opimai+0
art@4+356
77E7B385 CALLreg 00000000
--------------------- Binary Stack Dump ---------------------
========== FRAME [1] (_ksedmp+327 -> _ksedst+0) ==========
Dump of memory from 0x04B56A68 to 0x04B56AE0
4B56A60 04B56AE0 00522AC8 [.j...*R.]
4B56A70 00000000 00000000 00000000 00000000 [................]
4B56A80 FFFFFFFF 0000003F 0D3E4444 01AF86D4 [....?...DD>.....]
4B56A90 0D3E444C 04B56ADC 0283676E 0D3E4444 [LD>..j..ng..DD>.]
4B56AA0 0D3E444C 00000000 00000000 01AF86D4 [LD>.............]
4B56AB0 00000002 00000009 0D3E4368 04BE2A94 [........hC>..*..]
4B56AC0 01A89F00 0D3E41E0 04B56A74 0D3E4368 [.....A>.tj..hC>.]
4B56AD0 04B571F8 015DDE00 02775F44 FFFFFFFF [.q....].D_w.....]
========== FRAME [2] (_ksfdmp.108+14 -> _ksedmp+0) ==========
Dump of memory from 0x04B56AE0 to 0x04B56AEC
4B56AE0 04B56AEC 0078468B 00000003 [.j...Fx.....]
========== FRAME [3] (_kgerinv+131 -> 00000000) ==========
Dump of memory from 0x04B56AEC to 0x04B56B0C
4B56AE0 04B56B0C [.k..]
4B56AF0 02836849 0D3E4368 00000003 081B3444 [Ih..hC>.....D4..]
4B56B00 0D3E41E0 081B3444 081B3444 [.A>.D4..D4..]
========== FRAME [4] (_kgeasnmierr+19 -> _kgerinv+0) ==========
Dump of memory from 0x04B56B0C to 0x04B56B28

I have a new problem:
Due to the changes of the schema ( transcript_sequence ... stored as clob) i got an error in a view.
ORA-00932 : incosistent datatypes
The error occurs in V007 in the following rows
extractValue(value(tu),'/TU/TRANSCRIPT_SEQUENCE'),
extractValue(value(model),'/MODEL/CDS_SEQUENCE'),
extractValue(value(model),'/MODEL/PROTEIN_SEQUENCE')
But in V005 there is no error althought there is the row extractValue(value(tu),'/TU/TRANSCRIPT_SEQUENCE'),
the views
create or replace view V007_MODEL(FEAT_NAME,
                                                       GENE_SYNONYM,
                                                       GENE_SYNONYM_SYN_TYPE,
                                                       CHROMO_LINK,
                                                       TU_DATE,
                                                       TU_COORDSET_END5,
                                                       TU_COORDSET_END3,
                                                  TRANSCRIPT_SEQUENCE,
                                                       URL,
                                                       URL_URLNAME,
                                                       CURATED,
                                                       MODEL_COMMENT,
                                                       MODEL_FEAT_NAME,
                                                       PUB_LOCUS,
                                                       CDNA_SUPPORT_ACCESSION,
                                                       CDNA_SUPPORT_ACCESSION_DBXREF,
                                                       CDNA_SUPPORT_ACCESSION_IS_FLI,
                                                       CDNA_SA_UNIQUE_TO_ISOFORM,
                                                       CDNA_SA_ANNOT_INCORP,
                                                       MODEL_GENE_SYNONYM,
                                                       MODEL_GENE_SYNONYM_SYN_TYPE,
                                                       MODEL_CHROMO_LINK,
                                                       MODEL_DATE,
                                                       MODEL_COORDSET_END5,
                                                       MODEL_COORDSET_END3,
                                                       MA_AT_METHOD,
                                                       MA_AT_ATT_SCORE,
                                                       MA_AT_ATT_SCORE_DESC)
                                                       CDS_SEQUENCE,
                                                       PROTEIN_SEQUENCE)
as
select
     distinct
     extractValue(value(tu)           ,'/TU/FEAT_NAME'),
     extractValue(value(tu_gene_synonym)     ,'/GENE_SYNONYM/text()'),
     extractValue(value(tu_gene_synonym)     ,'/GENE_SYNONYM/@SYN_TYPE'),
     extractValue(value(tu_chromo_link)      ,'/CHROMO_LINK/text()'),
     extractValue(value(tu)           ,'/TU/DATE'),
     extractValue(value(tu)           ,'/TU/COORDSET/END5'),
     extractValue(value(tu)           ,'/TU/COORDSET/END3'),
     extractValue(value(tu)      ,'/TU/TRANSCRIPT_SEQUENCE'),
     extractValue(value(url)           ,'/URL/text()'),
     extractValue(value(url)           ,'/URL/@URLNAME'),
     extractValue(value(model)                    ,'/MODEL/@CURATED'),
     extractValue(value(model)                    ,'/MODEL/@COMMENT'),
     extractValue(value(model)                    ,'/MODEL/FEAT_NAME'),
     extractValue(value(model)                    ,'/MODEL/PUB_LOCUS'),
     extractValue(value(accession)      ,'/ACCESSION/text()'),
     extractValue(value(accession)      ,'/ACCESSION/@DBXREF'),
     extractValue(value(accession)           ,'/ACCESSION/@IS_FLI'),
     extractValue(value(accession)           ,'/ACCESSION/@UNIQUE_TO_ISOFORM'),
     extractValue(value(accession)           ,'/ACCESSION/@ANNOT_INCORP'),
     extractValue(value(model_gene_synonym),'/GENE_SYNONYM/text()'),
     extractValue(value(model_gene_synonym),'/GENE_SYNONYM/@SYN_TYPE'),
     extractValue(value(model_chromo_link) ,'/CHROMO_LINK/text()'),
     extractValue(value(model)                    ,'/MODEL/DATE'),
     extractValue(value(model)                    ,'/MODEL/COORDSET/END5'),
     extractValue(value(model)                    ,'/MODEL/COORDSET/END3'),
     extractValue(value(attribute_type)     ,'/ATTRIBUTE_TYPE/@METHOD'),
     extractValue(value(att_score)               ,'/ATT_SCORE/text()'),
     extractValue(value(att_score)               ,'/ATT_SCORE/@DESC')--,
     extractValue(value(model)                    ,'/MODEL/CDS_SEQUENCE'),
     extractValue(value(model)                    ,'/MODEL/PROTEIN_SEQUENCE')
from TIGR t,
     table(xmlsequence(extract(value(t)                    ,'/TIGR/PSEUDOCHROMOSOME')))                               p,
     table(xmlsequence(extract(value(p)                ,'/PSEUDOCHROMOSOME/ASSEMBLY/GENE_LIST/PROTEIN_CODING/TU')))           tu,
     table(xmlsequence(extract(value(tu)                    ,'/TU/GENE_SYNONYM'))) (+) tu_gene_synonym,
     table(xmlsequence(extract(value(tu)                    ,'/TU/CHROMO_LINK'))) (+) tu_chromo_link,
     table(xmlsequence(extract(value(tu)                    ,'/TU/URL'))) (+) url,
     table(xmlsequence(extract(value(tu)                ,'/TU/MODEL')))                                                                       model,
     table(xmlsequence(extract(value(model)               ,'/MODEL/CDNA_SUPPORT/ACCESSION')))                                         (+) accession,
     table(xmlsequence(extract(value(model)               ,'/MODEL/GENE_SYNONYM'))) (+) model_gene_synonym,
     table(xmlsequence(extract(value(model)               ,'/MODEL/CHROMO_LINK'))) (+) model_chromo_link,
     table(xmlsequence(extract(value(model)               ,'/MODEL/MODEL_ATTRIBUTE/ATTRIBUTE_TYPE'))) (+) attribute_type,
     table(xmlsequence(extract(value(attribute_type),'/ATTRIBUTE_TYPE/ATT_SCORE')))                         (+) att_score,
     table(xmlsequence(extract(value(model)               ,'/MODEL/EXON')))                                                                            exon
create or replace view V005_GENE_INFO(FEAT_NAME,
                                                            GENE_SYNONYM,
                                                            GENE_SYNONYM_SYN_TYPE,
                                                            CHROMO_LINK,
                                                            TU_DATE,
                                                            TU_COORDSET_END5,
                                                            TU_COORDSET_END3,
                                                            TRANSCRIPT_SEQUENCE,
                                                            URL,
                                                            URL_URLNAME,
                                                            LOCUS,
                                                            ALT_LOCUS,
                                                            PUB_LOCUS,
                                                            GENE_NAME,
                                                            GENE_NAME_IS_PRIMARY,
                                                            COM_NAME,
                                                            COM_NAME_CURATED,
                                                            COM_NAME_IS_PRIMARY,
                                                            GENE_INFO_COMMENT,
                                                            PUB_COMMENT,
                                                            EC_NUM,
                                                            EC_NUM_IS_PRIMARY,
                                                            GENE_SYM,
                                                            GENE_SYM_IS_PRIMARY,
                                                            IS_PSEUDOGENE,
                                                            FUNCT_ANNOT_EVIDENCE_TYPE,
                                                            FAE_ASSIGN_ACC,
                                                            FAE_ASSIGN_ACC_ASSIGN_METHOD,
                                                            GENE_INFO_DATE)
as
select
     extractValue(value(tu)                ,'/TU/FEAT_NAME'),
     extractValue(value(gene_synonym)               ,'/GENE_SYNONYM/text()'),
     extractValue(value(gene_synonym)               ,'/GENE_SYNONYM/@SYN_TYPE'),
     extractValue(value(chromo_link)                ,'/CHROMO_LINK/text()'),
     extractValue(value(tu)                ,'/TU/DATE'),
     extractValue(value(tu)                ,'/TU/COORDSET/END5'),
     extractValue(value(tu)           ,'/TU/COORDSET/END3'),
     extractValue(value(tu)                ,'/TU/TRANSCRIPT_SEQUENCE'),
     extractValue(value(url)                ,'/URL/text()'),
     extractValue(value(url)                ,'/URL/@URLNAME'),
     extractValue(value(tu)                              ,'/TU/GENE_INFO/LOCUS'),
     extractValue(value(alt_locus)                    ,'/ALT_LOCUS/text()'),
     extractValue(value(tu)                              ,'/TU/GENE_INFO/PUB_LOCUS'),
     extractValue(value(gene_name)                    ,'/GENE_NAME/text()'),
     extractValue(value(gene_name)                    ,'/GENE_NAME/@IS_PRIMARY'),
     extractValue(value(com_name)                     ,'/COM_NAME/text()'),
     extractValue(value(com_name)                     ,'/COM_NAME/@CURATED'),
     extractValue(value(com_name)                     ,'/COM_NAME/@IS_PRIMARY'),
     extractValue(value(tu)                              ,'/TU/GENE_INFO/COMMENT'),
     extractValue(value(tu)                              ,'/TU/GENE_INFO/PUB_COMMENT'),
     extractValue(value(ec_num)                     ,'/EC_NUM/text()'),
     extractValue(value(ec_num)                     ,'/EC_NUM/@IS_PRIMARY'),
     extractValue(value(gene_sym)                     ,'/GENE_SYM/text()'),
     extractValue(value(gene_sym)                     ,'/GENE_SYM/@IS_PRIMARY'),
     extractValue(value(tu)                              ,'/TU/GENE_INFO/IS_PSEUDOGENE'),
     extractValue(value(funct_annot_evidence),'/FUNCT_ANNOT_EVIDENCE/@TYPE'),
     extractValue(value(assign_acc) ,'/ASSIGN_ACC/text()'),
     extractValue(value(assign_acc) ,'/ASSIGN_ACC/@ASSIGN_METHOD'),
     extractValue(value(tu)                              ,'/TU/GENE_INFO/DATE')
from TIGR t,
     table(xmlsequence(extract(value(t)                         ,'/TIGR/PSEUDOCHROMOSOME')))                               p,
     table(xmlsequence(extract(value(p) ,'/PSEUDOCHROMOSOME/ASSEMBLY/GENE_LIST/PROTEIN_CODING/TU')))     tu,
     table(xmlsequence(extract(value(tu)                              ,'/TU/GENE_SYNONYM'))) (+) gene_synonym,
     table(xmlsequence(extract(value(tu)                              ,'/TU/CHROMO_LINK'))) (+) chromo_link,
     table(xmlsequence(extract(value(tu)                              ,'/TU/URL'))) (+) url,
     table(xmlsequence(extract(value(tu)           ,'/TU/GENE_INFO/ALT_LOCUS'))) (+) alt_locus,
     table(xmlsequence(extract(value(tu)           ,'/TU/GENE_INFO/GENE_NAME'))) (+) gene_name,
     table(xmlsequence(extract(value(tu)           ,'/TU/GENE_INFO/COM_NAME'))) com_name,
     table(xmlsequence(extract(value(tu)           ,'/TU/GENE_INFO/EC_NUM'))) (+) ec_num,
     table(xmlsequence(extract(value(tu)           ,'/TU/GENE_INFO/GENE_SYM'))) (+) gene_sym,
     table(xmlsequence(extract(value(tu)           ,'/TU/GENE_INFO/FUNCT_ANNOT_EVIDENCE'))) (+) funct_annot_evidence,
     table(xmlsequence(extract(value(funct_annot_evidence),'/FUNCT_ANNOT_EVIDENCE/ASSIGN_ACC'))) (+) assign_acc
I have a second question.
Usually I use WEBDAV or FTP to load the xml documents.
There are 5 documents for TIGR Arabidopsis. Now it works to load the documents into the xdb. I usually use WEBDAV. But when I load the first document I get an error. Nevertheless the document is shredded. Because the WEBDAV error message is not meaningful, I used PL/SQL.
I tried it like this
insert into TIGR values (xmltype(bfilename(USER,'/home/pdw_tigr_chromosome/data/CHR1.R5v01212004wos.xml'),nls_charset_id('AL32UTF8')))
( I deleted the expressions " xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="tigrxml.xsd" " in the document before).
But this didn't work.
So I tried
insert into TIGR values (xmltype(xdbURIType('/home/pdw_tigr_chromosome/data/CHR1.R5v01212004wos.xml').getClob(),'tigrxml.xsd',1,1))
and it worked. But it seemed to need more time than per WEBDAV or FTP ( but probably I err ). It took 1h 48m for a 74MB file.
When I load the documents with PL/SQL the document is not shredded. At least the document has its original size when i have a look at the repository per WEBDAV and not the usual 0 bytes. But the data is correctly stored in the xmltype table TIGR
Message was edited by:
Nick_MD

Loading an image into an Applet from a JAR file

Hello everyone, hopefully a simple question for someone to help me with!
Im trying to load some images into an applet, currently it uses the JApplet.getImage(url) method just before registering with a media tracker, which works but for the sake of efficiency I would prefer the images all to be contained in the jar file as oppossed to being loaded individually from the server.
Say I have a class in a package eg, 'com.mydomain.myapplet.class.bin' and an images contained in the file structure 'com.mydomain.myapplet.images.img.gif' how do I load it (and waiting for it to be loaded before preceeding?
I've seen lots of info of the web for this but much of it is very old (pre 2000) and im sure things have changed a little since then.
Thanks for any help!

I don't touch applets, so I can't help you there, but here's some Friday Fun: tracking image loading.
import java.awt.*;
import java.awt.image.*;
import java.beans.*;
import java.io.*;
import java.net.*;
import javax.imageio.*;
import javax.imageio.event.*;
import javax.imageio.stream.*;
import javax.swing.*;
public class ImageLoader extends SwingWorker<BufferedImage, Void> {
    private URL url;
    private JLabel target;
    private IIOReadProgressAdapter listener = new IIOReadProgressAdapter() {
        @Override public void imageProgress(ImageReader source, float percentageDone) {
            setProgress((int)percentageDone);
        @Override public void imageComplete(ImageReader source) {
            setProgress(100);
    public ImageLoader(URL url, JLabel target) {
        this.url = url;
        this.target = target;
    @Override protected BufferedImage doInBackground() throws IOException {
        ImageInputStream input = ImageIO.createImageInputStream(url.openStream());
        try {
            ImageReader reader = ImageIO.getImageReaders(input).next();
            reader.addIIOReadProgressListener(listener);
            reader.setInput(input);
            return reader.read(0);
        } finally {
            input.close();
    @Override protected void done() {
        try {
            target.setIcon(new ImageIcon(get()));
        } catch(Exception e) {
            JOptionPane.showMessageDialog(null, e, "Error", JOptionPane.ERROR_MESSAGE);
    //demo
    public static void main(String[] args) throws IOException {
        final URL url = new URL("http://blogs.sun.com/jag/resource/JagHeadshot.jpg");
        EventQueue.invokeLater(new Runnable(){
            public void run() {
                launch(url);
    static void launch(URL url) {
        JLabel imageLabel = new JLabel();
        final JProgressBar progress = new JProgressBar();
        progress.setBorderPainted(true);
        progress.setStringPainted(true);
        JScrollPane scroller = new JScrollPane(imageLabel);
        scroller.setPreferredSize(new Dimension(800,600));
        JPanel content = new JPanel(new BorderLayout());
        content.add(scroller, BorderLayout.CENTER);
        content.add(progress, BorderLayout.SOUTH);
        JFrame f = new JFrame("ImageLoader");
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.setContentPane(content);
        f.pack();
        f.setLocationRelativeTo(null);
        f.setVisible(true);
        ImageLoader loader = new ImageLoader(url, imageLabel);
        loader.addPropertyChangeListener( new PropertyChangeListener() {
             public void propertyChange(PropertyChangeEvent evt) {
                 if ("progress".equals(evt.getPropertyName())) {
                     progress.setValue((Integer)evt.getNewValue());
                     System.out.println(evt.getNewValue());
                 } else if ("state".equals(evt.getPropertyName())) {
                     if (SwingWorker.StateValue.DONE == evt.getNewValue()) {
                         progress.setIndeterminate(true);
        loader.execute();
abstract class IIOReadProgressAdapter implements IIOReadProgressListener {
    @Override public void imageComplete(ImageReader source) {}
    @Override public void imageProgress(ImageReader source, float percentageDone) {}
    @Override public void imageStarted(ImageReader source, int imageIndex) {}
    @Override public void readAborted(ImageReader source) {}
    @Override public void sequenceComplete(ImageReader source) {}
    @Override public void sequenceStarted(ImageReader source, int minIndex) {}
    @Override public void thumbnailComplete(ImageReader source) {}
    @Override public void thumbnailProgress(ImageReader source, float percentageDone) {}
    @Override public void thumbnailStarted(ImageReader source, int imageIndex, int thumbnailIndex) {}
}

How to load a jpg into my movie ???

I want to load an image stored on my pc into my swf file. i
know that i can use the loadMovie() method. but i didnt know how to
enter the url of the target file. For example i have the file in
the following directory - C:\Documents and Settings\Admin\My
Documents\image.jpg - how can i load this file into my movie ???
and THANX...

aha, ok now i have a problem in duplicating nested movie
clips. like if i have made a movieclip using the code (lets name it
OUTSIDE) and another one inside(lets name it INSIDE) it, when i
duplicate the movieclip OUTSIDE the INSIDE one doesnt exist in the
new copy. i think the reason is something related to the depth but
i'm not sure where is the problem. here is an example:
this.createEmptyMovieClip("line",this.getNextHighestDepth());
line.createEmptyMovieClip("lineIn",this.getNextHighestDepth());
line.lineIn.lineStyle(10);
line.lineIn.lineTo(100,100);
line.duplicateMovieClip("line2",this.getNextHighestDepth());
line2._x = 150;
when i duplicate the the movieclip (line), the movieclip
(lineIn) doesnt exist inside the new copy which is (line2)

Best method to load XML data into Oracle

Hi,
I have to load XML data into Oracle tables. I tried using different options and have run into a dead end in each of those. I do not have knowledge of java and hence have restricted myself to PL/SQL solutions. I tried the following options.
1. Using DBMS_XMLSave package : Expects the ROWSET and ROW tags. Connot change format of the incoming XML file (Gives error oracle.xml.sql.OracleXMLSQLException: Start of root element expected).
2. Using the XMLPARSER and XMLDOM PL/SQL APIs : Works fine for small files. Run into memory problems for large files (Gives error java.lang.OutOfMemoryError). Have tried increasing the JAVA_POOL_SIZE but does not work. I am not sure whether I am changing the correct parameter.
I have read that the SAX API does not hog memory resources since it does not build the entire DOM tree structure. But the problem is that it does not have a PL/SQL implementation.
Can anyone PLEASE guide me in the right direction, as to the best way to achieve this through PL/SQL ??? I have not designed the tables so am flexible on using purely relational or object-relational design. Although would prefer to keep a purely relational design. (Had tried used object-relational for 1. and purely relational for 2. above)
The XML files are in the following format, (EXAMINEEs with single DEMOGRAPHIC and multiple TESTs)
<?xml version="1.0"?>
<Root_Element>
<Examinee>
<MACode>A</MACode>
<TestingJID>TN</TestingJID>
<ExamineeID>100001</ExamineeID>
<CreateDate>20020221</CreateDate>
<Demographic>
<InfoDate>20020221</InfoDate>
<FirstTime>1</FirstTime>
<LastName>JANE</LastName>
<FirstName>DOE</FirstName>
<MiddleInitial>C</MiddleInitial>
<LithoNumber>73</LithoNumber>
<StreetAddress>SomeAddress</StreetAddress>
<City>SomeCity</City>
<StateCode>TN</StateCode>
<ZipCode>37000</ZipCode>
<PassStatus>1</PassStatus>
</Demographic>
<Test>
<TestDate>20020221</TestDate>
<TestNbr>1</TestNbr>
<SrlNbr>13773784</SrlNbr>
</Test>
<Test>
<TestDate>20020221</TestDate>
<TestNbr>2</TestNbr>
<SrlNbr>13773784</SrlNbr>
</Test>
</Examinee>
</Root_Element>
Thanks for the help.

Please refer to the XSU(XML SQL Utility) or TransX Utility(for Multi-language Document) if you want to load data in XML format into database.
Both of them require special XML formats, please first refer to the following docs:
http://otn.oracle.com/docs/tech/xml/xdk_java/doc_library/Production9i/doc/java/xsu/xsu_userguide.html
http://otn.oracle.com/docs/tech/xml/xdk_java/doc_library/Production9i/doc/java/transx/readme.html
You can use XSLT to transform your document to the required format.
If you document is large, you can use SAX method to insert data into database. But you need to write the code.
The following sample may be useful:
http://otn.oracle.com/tech/xml/xdk_sample/xdksample_040602i.html

How to control the measure based on the related dimension.

Hi Experts,
In order to improve performance, I have created three kinds of time tables in DB,such as Year .Month, Day.
Then import them into the physical layer in RPD, and combine them into one dimension in BMM.
Actually, it has three level fact related with three time tables,so they are also dragged into one fact in BMM,and one column will be corresponding with three column derived from different Fact table in physical layer.
So I want to know how to control the measure based on the related dimension.
For example:
when users drag the Year,Sales column, it will come from Year Dimension and Year Fact Table.
when users drag the Month,Sales column, it will come from Month Dimension and Month Fact Table.
when users drag the Day,Sales column, it will come from Day Dimension and Day Fact Table.

Hi,
Create a dimension Hierarchy, with Year >> Month >> Day Levels and
Next Double click on Year Table LTS >> click on Ocntetnt Tab >> set as Year
same way for Month LTS and Day LTS.
So now when you select year column then server canknow which LTS to hit and Hits Year LTS.
Mark If Helpfu/correct
Thanks.

Loading XML file into DB Table

Hi
I m quite new to the loading XML file into database table.
It will be great if anyone could guide me to through.
Now,
i have an XML file which has to be loaded into the DB table.
what are the steps involved in doing this. How do i go from here ??
your help is greatly appriciated ???
Thank you so much!!
-Shashi

OK - Although you really should read the XMLDB FAQ on this forum, here is some sample code of ONE of the ways of doing it
(there are multiple ways - and this is not the most simple one)
Based on Oracle 11gR1
-- sqlplus /nolog
clear screen
set termout on
set feed on
set lines 40
set long 10000000
set serveroutput on
set lines 100
set echo on
connect / as sysdba
col filename for a80
col xml      for a80
-- Create schema “OTN”
drop user OTN cascade;
purge dba_recyclebin;
create user OTN identified by OTN;
grant dba, xdbadmin to OTN;
EXECUTE dbms_java.grant_permission( 'OTN', 'java.io.FilePermission','G:\OTN\xmlstore','read' );
prompt pause
pause
clear screen
-- Create directory
connect OTN/OTN;
show user
drop directory OTN_USE_CASE;
CREATE directory OTN_USE_CASE AS 'G:\OTN\xmlstore';
SELECT extract((XMLTYPE(bfilename('OTN_USE_CASE','ABANDA-20030407215829881GMT.xml'),NLS_CHARSET_ID('AL32UTF8'))),'*') AS "XML"
from   dual;
prompt pause
pause
clear screen
-- Directory Listing - Tom Kyte
create global temporary table DIR_LIST
( filename varchar2(255) )
on commit delete rows
create or replace
and compile java source named "DirList"
as
import java.io.*;
import java.sql.*;
public class DirList
{public static void getList(String directory)
                   throws SQLException
{   File path = new File( directory );
    String[] list = path.list();
    String element;
    for(int i = 0; i < list.length; i++)
    {   element = list;
#sql { INSERT INTO DIR_LIST (FILENAME)
VALUES (:element) };
create or replace procedure get_dir_list( p_directory in varchar2 )
as language java
name 'DirList.getList( java.lang.String )';
prompt pause
pause
clear screen
-- The content of the global temporary table
exec get_dir_list( 'G:\OTN\xmlstore' );
select * from dir_list;
-- "COMMIT" will clear / truncate the global temporary table...
prompt pause
pause
clear screen
-- Combined: Reading XML content from multiple XML files
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
select * from dir_list where filename like '%.xml'
and rownum <= 10;
prompt pause
pause
clear screen
select extract((XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8'))),'*') AS "XML"
from dir_list dl
where dl.filename like '%.xml' and rownum <= 2;
prompt pause
pause
clear screen
-- If you can select it you can insert it...
-- drop table OTN_xml_store purge;
create table OTN_xml_store of xmltype
xmltype store as binary xml
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
set time on timing on
insert into OTN_xml_store
select XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8')) AS "XML"
from dir_list dl
where dl.filename like '%.xml';
set time off timing off
commit;
select count(*) from OTN_xml_store;
prompt pause
pause
clear screen
-- If you can select it you can create resources and files
set time on timing on
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
select count(*) from dir_list where filename like '%.xml';
set serveroutput on size 10000
DECLARE
XMLdoc XMLType;
res BOOLEAN;
v_foldername varchar2(4000) := '/public/OTN/';
cursor c1
is
select dl.filename FNAME
, XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8')) XMLCONTENT
from dir_list dl
where dl.filename like '%.xml'
and rownum <= 100;
BEGIN
-- Create XDB repository Folder
if (dbms_xdb.existsResource(v_foldername))
then
dbms_xdb.deleteResource(v_foldername,dbms_xdb.DELETE_RECURSIVE_FORCE);
end if;
res:=DBMS_XDB.createFolder(v_foldername);
-- Create XML files in the XDB Repository
for r1 in c1
loop
if (DBMS_XDB.CREATERESOURCE(v_foldername||r1.fname, r1.xmlcontent))
then
dbms_output.put_line(v_foldername||r1.fname);
null;
else
dbms_output.put_line('Loop Exception :'||sqlerrm);
end if;
end loop;
EXCEPTION WHEN OTHERS THEN
dbms_output.put_line('Others Exception: '||sqlerrm);
END;
set time off timing off
commit;
prompt pause
pause
clear screen
-- FTP and HTTP
clear screen
prompt
prompt *** FTP - Demo ***
prompt
prompt pause
pause
host ftp
-- open localhost 2100
-- user OTN OTN
-- cd public
-- cd OTN
-- ls
-- bye
clear screen
prompt
prompt *** Microsoft Internet Explorer - Demo ***
prompt
prompt pause
pause
host "C:\Program Files\Internet Explorer\IEXPLORE.EXE" http://OTN:OTN@localhost:8080/public/OTN/
prompt pause
pause
-- Accessing the XDB Repository content via Resource View
-- Selecting content from a resource via XBDUriType
clear screen
prompt set long 300
set long 300
prompt Relative Path - (path)
SELECT path(1) as filename
FROM RESOURCE_VIEW
WHERE under_path(RES, '/public/OTN', 1) = 1
and rownum <= 10
prompt pause
pause
clear screen
prompt Absolute Path - (any_path)
select xdburitype(any_path).getClob() as xml
FROM RESOURCE_VIEW
WHERE under_path(RES, '/public/OTN', 1) = 1
and rownum <= 1;
prompt pause
pause
-- CLEANUP ENVIRONMENT
clear screen
prompt
prompt >>>>> Clean UP !!! <<<<<<
prompt
prompt Cleanup environment and drop user...!!!
prompt
pause
clear screen
conn / as sysdba
alter session set current_schema=OTN;
begin
dbms_xdb.deleteResource('/public/OTN',dbms_xdb.DELETE_RECURSIVE_FORCE);
commit;
end;
alter session set current_schema=sys;
drop user OTN cascade;
Based on http://www.liberidu.com/blog/?p=1053

Loading hierarchical dimension in planning

Hi,
I'm trying to load an Account dimension in Planning..
It is a flat table with the following levels. The table basically created P&l and balance sheet hierarchies..
L1 L2 L3 L4 ACCOUNTID ACCOUNTDESC
Do I need to convert this table in parent child format before loading it using ODI?
If not how do I load it in a flat format using ODI..
Any same query for converting it in parent child format will be helpful..
Any responses will be much appreciated!!

A simple way would be to have multiple loads L1, L2 then L2, L3..... or load the file into a table and create a view on it.
Cheers
John
http://john-goodwin.blogspot.com/

SCD type 2 and 3 for Relational Dimension?

SCD type 2 and 3 for Relational Dimension?
==========================
Thanks for your replies.
I searched this forum and web on SCD 2 and 3 implementation using Relational Dimension (Table) using OWB.
I find some thread talks about implementing Oracle Dimensional structures, which has levels/hierarchy etc.
If we design our dimension in pure relational fashion, how do we go about using OWB for SCD 2 and 3?
Are there any new SQL features of 11g to help us here?
Thanks in helping.
RI

Hi,
several years ago Oracle published whitepaper which described steps for designing OWB mappings for loading SCD (types 1,2,3) tables.
But recently (after website reorganization) this whitepaper was removed, although you can stil find it by googling with "scdwhitepaper",
or you can directly download it from http://sourceforge.net/projects/owbland/files/Stuffs_from_Oracle_site/SCDWhitePaper.zip/download
Also it is available for download OWB experts which implement generation of SCD2 mappings according this whitepaper:
http://odi-ee.blogspot.com/2009/02/scd-type2-expert-table-operator.html
http://owbexpert.blogspot.com/2008/12/hallo-hallo.html
Also look at this thread {message:id=4336731} with discussion of bug which force to update all rows in target table, even they not changed between mapping executions.
Regards,
Oleg

HOW DO YOU LOAD A CD INTO A MAC BOOK LAP TOP

trying to load turbotax cd into my macbook

A [https://www.google.com/search?q=Mac+user+group&sourceid=mozilla-search&start=0&start=0&ie=utf-8&oe=utf-8num=100&gws_rd=ssl Mac Users Group] would be the place to ask that question, which isn't related to Firefox support. Thanks for your understanding.

What are impact of Braking one dimension into two

Hi Champs,
I have one Dimension say Product that has two child AC and AP. and these two children has two childs each.
and further these devided into many levels.
this is like
Product
-AC
-CC_A
-CC_B
-AP
-CP_A
-CP_B
A,B are showing some member, but both are repeting AC and AP.
Now I need to create a seperate dimension for A and B and remove from Product.
How this will be done and on what objects of Essbase will be affected. How to do.
Thanks in Advance
Shiv

Breaking a dimension into multiple dimensions has a number of implications. You have to modify dimension build and load rules, caclulation scripts, report scripts and front end tools/templates and source files to use the new structure. IT can be a lot of work.
I could not tell by your example, when you split the dimension in two, will you be able to get the data as an intersection of the two dimensions? If not, it would be hard to split. Can you explain further why the dimension needs to be split into to and perhaps I can make a more informed recomendation.
The paractical answer of exporting the data from Will is correct. You will need to export the existing data (or get it from source again) in a column format and create load rules to be able to reload it. Depending on how the intersections work, it might be an easy or extremely hard task

Loading relational cube

Hi,
Several questions regarding relational cubes (build using OWB wisard).
1. I would like to have an sample mapping for loading relational cube.
I am able to load all dimension correctly, but for some reason when I load the cube nothing is loaded.
2. Is it possible to on relational cube to aggregate the information on part of the dimensions? I have created relational cube based on 5 dimensions including time. The cube has two cumulative measures: amount and storage.
For "amount" and "storage" measures, I would like to sum up for all dimension except for time. For time I want to take the end_date of a period value.
3. Is it possible to add a third and forth measures avg_amount and avg_storage and issue an "average" aggregation on those measure (while on "amount" and "storage" we shall use "sum").
Hope the above is clear.
Thanks
Galit

Please ignore, I put it under wrong discussion group.

I'cant load SPRY content into a Frame

HOw can i load spry content into a frame.. i wrote a code..
and in the preview version works.. but when i upload to server..
it's not working.. this my code.. thk
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Collapsible Panel Group Sample</title>
<script language="JavaScript" type="text/javascript"
src="widgets/collapsiblepanel/SpryCollapsiblePanel.js"></script>
<script language="JavaScript" type="text/javascript">
function load_content ()
if (parent.document.getElementById('main_div')) {
parent.document.getElementById('main_div').innerHTML=document.getElementById('inner_frame ').innerHTML;
if (!parent.document.getElementById('main_div')) {
window.location=('index.html') ;
</script>
<link
href="widgets/collapsiblepanel/SpryCollapsiblePanel.css"
rel="stylesheet" type="text/css" />
<link href="css/samples.css" rel="stylesheet"
type="text/css" />
<style type="text/css">
#cp1 .CollapsiblePanelContent {
overflow: scroll;
height: 300px;
.CollapsiblePanel {
width: 300px;
.CollapsiblePanelTab {
font-size: 1em;
</style>
</head>
<body onload="load_content()">
<h3>Collapsible Panel Group Sample</h3>
<p>By default the panels in a collapsible panel group
are open.</p>
<div id="inner_frame">
<div id="CollapsiblePanelGroup1"
class="CollapsiblePanelGroup">
<div class="CollapsiblePanel">
<div class="CollapsiblePanelTab" tabindex="0">Panel
23</div>
<div class="CollapsiblePanelContent">
<p>Test 1.</p>
</div>
</div>
<div class="CollapsiblePanel">
<div class="CollapsiblePanelTab" tabindex="0">Panel
2</div>
<div class="CollapsiblePanelContent">
<p>test 2</p>
</div>
</div>
<div class="CollapsiblePanel">
<div class="CollapsiblePanelTab" tabindex="0">Panel
3</div>
<div class="CollapsiblePanelContent">
<p>test 3</p>
</div>
</div>
</div>
</div>
<script language="JavaScript" type="text/javascript">
var cpg1 = new
Spry.Widget.CollapsiblePanelGroup("CollapsiblePanelGroup1", {
contentIsOpen: false });
</script>
</body>
</html>

Im not sure if i'm doing it right, but it wont work for me
var scriptEle= document.createElement("script");
scriptEle.text = s;
ele.appendChild(scriptEle);
is this the exact code witch i have to replace the old one
with?
i also added the
Spry.Data.initRegions(ele);
on the end of the Spry.Utils.setInnerHTML function
i havent included the spry related javascripts in the main
page could tha be a problem?
actually i've tried to but it did'nt help
really thanx tha you willing to help

Loading relational dimension into AW

Similar Messages

Maybe you are looking for