Loading screen bar wont move! HELP!

After rebooting my phone for updates, my phone wont come back on. On the loading the screen the white bar wont move forward from the half way point. I took the battery out then put it back in and left it for about 2 hours. It still not loading all the way. I've taken out the SIM card and it still wont load. What should I do??

I'm having the exact same problem. The loading bar goes around two thirds the way across then stops and freezes. This is all because of rebooting after downloading the new update for Blackberry Messenger (BBM).

Similar Messages

  • HT1553 my macbook pro is frozen and does not move from loading screen. Can you help?

    my macbook pro is frozen and does not move from loading screen. Can you help?

    Call Apple Support and schedule a appointment for a hardware check, or take it into a Apple Store.
    We can't help you with that problem.
    Good Luck

  • IPad stuck on loading screen, won't move to recovery mode.

    I tried to restore my iPad but it got stuck on the loading screen and it didn't change for 6 hours. I tried restarting it a couple of times - it showed me the normal apple logo but then it went back to the loading screen. The computer doesn't respond to the iPad and i hadn't been able to put in on recovery mode.
    How do i turn my iPad back on? I don't mind stuff being deleted.

    Hi zafr1212,
    Welcome to the Support Communities!  The resource below will provide the steps to put your iPad into recovery mode.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT201263
    Use recovery mode
    You might need to use recovery mode to restore your device in these cases:
    iTunes doesn't recognize your device or says it's in recovery mode.
    You see the Apple logo onscreen for several minutes with no progress bar.
    You see the Connect to iTunes screen.
    Learn what to do if you see the progress bar onscreen for several minutes.
    To put your device into recovery mode, follow these steps:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes. 
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again. 
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.Get more help
    Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
    If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
    Last Modified: Nov 7, 2014
    I hope this information helps ....
    - Judy

  • My imac is stuck at the loading screen and wont start up...

    My 2006(ish) Intel core 2duo 2.16 mhz 20"  imac wont start up, it only stays at the loading screen, how can i fix this?

    Since you purchased your iMac long before the Lion OS was released your system should have come with a set of DVD's that can be used to reinstall the OS and applications. If you can locate those disks then stick the Install DVD into the optical drive, then power on the system while holding down the option key. Your system should boot with a menu showing the bootable volumes. After a few seconds you should hear the optical drive whirr and then see the Install DVD appear in the menu. Select the Install DVD and boot the system. Once booted you will have to select your language. Normally this disk is used to reinstall the OS, however for this exercise I would like you to pull down the Utilities menu in the menu bar and select Disk Utility. You can use the Disk Utility to check whether your hard drive is OK. If it fails the SMART (Self Monitoring Analysis, and Reporting Technology) status then you will need to replace the hard drive. You should also run the 'Verify Disk' and 'Repair Permissions' options if the SMART status indicates the drive is passing.

  • Was looking at app and its stuck on the page wont move help

    can someone please help im desperate was looking at a game on the apps download and its stuck on the page cannot get it to move even tried downloading it and still wont go away

    iOS Reset -
    Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

  • Ipod video ( 5th gen. ) - white screen only - wont reset -   HELP! please

    ipod video ( 5th gen. )
    all i get is a white screen
    wont reset, wont mount
    disk utility sees it sometimes but wont touch it....
    HELP! please
    T I A

    You might want to give a try to CopyTrans Doctor http://www.copytrans.net/doctor.php

  • Ipod touch keeps giving me a blue screen and wont work, HELP!!!

    So earlier today my ipod gave me a notification that a new ios software update was avaliable so i began the update. But during the update, i got impatient (like i always am -_-) and i decided to turn my ipod completely off by holding down the top and home buttons at the same time like an idiot........HUGE MISTAKE!! Now everytime i try and turn it on, all it does is show the logo and then it goes to a blue screen and the bluescreen fades out to white and stays that way. Each time i try and turn it off it keeps repeating this process. How can i fix this?? Will my ipod be like this forever? HELP :'(

    HI.. i have the same issue... any help !!!!!!

  • My mbp won't boot up. It froze so I had to hold the power button to shut down. Now it locks on the loading screen and freezes. Help

    Can anyone help? Mbp froze and pressed power button to shutdown. Now can't reboot :(

    Hi,
    Also, see these Support Articles for further Information:
    1) Disk Utility
    http://support.apple.com/kb/HT1782?viewlocale=en_US
    2) Resolve Start Up Issues
    http://support.apple.com/kb/TS1417
    HTH,

  • Windows 8.1 store stuck in the loading screen after update 1. pls help me!!

    I also tried to re-register the store but still its stuck in the loading screen ! pls someone help me!!. its not working after the update 1. I can't download any apps

    Hi,
    How did you re-register store? Is there any error message when you couldn't open Store?
    To resolve store opening problem, firstly, you can try to use WSRESET command to clear store cache for test.
    Secondly, try to use APP Troubleshooter to fix this problem.
    APP troubleshooter:
    http://go.microsoft.com/fwlink/p/?LinkId=268423
    Roger Lu
    TechNet Community Support

  • Ipod has shut off and only shows the apple logo and the loading screen for the past day

    I was downloading a song from one of the ipod apps for illegal songs and it just stoped downloading so i restarted my ipod and it would turn back on but if i would try to go back into the app it would only push me out of it. so after restarting it a coupld more times just with the ipod it has resulted in not turning back on and remaining on the apple logo screen then to the loading screen. it wont turn on at all. i have charged it (or tried) for a whole night but the whole night it has remained on the two screen. i cant plus it into my computer because then i will lose all my music. i dont know what to do.?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    You will very very likely lose the contents on the iPod. That is the way it is .

  • Loading screen above Applet from an iframe

    Hi,
    i am running this code for loading screen which is transparent
    http://www.andrewpeace.com/loading-screen.html
    now i am placing an iframe
    <p><iframe src="http://statlab0.fon.bg.ac.yu/eng/eng/apletieng/buffon/Coin.html" id="appletFrame"></iframe></p>
    so that i may also come behind the loading screen. But the applet is coming in front of the loading screen and not goin behind the screen. can anyone suggest a way to let the applet also to be behind the loading screen.
    the above html had the javascript code for loading screen.
    if anyone can help out today :(
    i am in urgent need.

    No, but maybe a trace could shed some light on the problem:
    To turn the full trace on (windows) you can start the java console, to be found here:
    C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
    In the advanced tab you can fill in something for runtime parameters fill in this:
    -Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
    if you cannot start the java console check here:
    C:\Documents and Settings\userName\Application Data\Sun\Java\Deployment\deployment.properties
    I think for linux this is somewhere in youruserdir/java (hidden directory)
    add or change the following line:
    javaplugin.jre.params=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
    for 1.5:
    deployment.javapi.jre.1.5.0_03.args=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
    The trace is here:
    C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log
    I think for linux this is somewhere in youruserdir/java (hidden directory)
    Print out the full trace of the exception:
    try{...}catch(Exception e){e.printStackTrace();}

  • Pearl stuck on load screen 100%

    Not sure why it even needed to reset. I just looked at it and it was on the load screen - bar loaded to 100%.
    After half an hour nothing has changed, and the phone is unresponsive.
    I've tried a battery pull.
    After looking on google I found this
    http://supportforums.blackberry.com/t5/BlackBerry-Bold/Stuck-on-start-up-screen/td-p/572603
    Which tells you to reset the software through blackberry desktop manager,
    but...
    The desktop manager won't connect to my phone and is stuck on connecting.
    I've only had the phone for under 2 months!
    Any suggestions?
    Thanks!

    Welcome to the user to User Technical Support Forum provided by Apple
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.
    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    There is No Workaround.

  • My iphone 4 after update ios wont turn on and stuck in restore with apple logo and loading bar not move

    When I update the ios on my Iphone 4 it wont turn on and I tried to restore it, but it stuck in restore with apple logo and loading bar not move at all, I contact apple support and they tried to help me but nothing work, then they told me to send it to replace it and I need to pay $149, that's mean if anybody has any problem with his iphone even the problem from apple software you need to pay, that's not fair at all.... I will try to sale all our apple device and by Samsung device to resolve this problems.

    I believe this means that it is bricked, just sell it for parts, to someone like me

  • Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.

    hi, please help.
    Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.
    i saved these files to a folder on the destop and then turned the computer off. oops!!! now computer wont start up
    How do i put the startupitems back to this folder or beter yet get into the computer to fix this.
    Please please help!!!

    Reinstall OS X, either from disc or a recovery partition. You don't mention which version of OS X you're running so I don't know which it will be.

  • I was using my 3rd generation ipod touch and i turned it off and the loading screen wont turn off to allow my ipod to turn off, help!!

    I was using my 3G ipod touch and i slid the power off button to turn it off and the loading screen before it shuts off wont allow my ipod to turn off. i cant do anything because my ipod has the loading screen still on it. HELP!!

    Try a hard reset.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.  Then try shutting your iPod off again.
    B-rock

Maybe you are looking for

  • How do I set up a different email address for HPePrint

    how do I set up a different email address for HPePrint

  • New logic board and now i-tunes music store and i-disk not able to connect

    Hi, My poor MBP died a few weeks ago - the Logic board went and took the Apple RAM with it (the Crucial one stayed fine!). As it's only six months old it has been fixed under warranty. However.... I've just tried to play some purchased music from i-t

  • Problem in opening cloned database

    i have cloned database with name test to test1 in the same oracle home.My problem is that i can't able to open the cloned database c:\>set oracle_sid=test1 c:\>sqlplus /nolog SQL>conn sys/oracle as sysdba; ORA-12560 TNS:Protocol adapter Error. But if

  • Adobe Reader uninstall problem

    I'm using Reader 10 and was advised to delete version 8.1.4 because it is vulnerable to hack.  I get the following error message when I try to uninstall from add remove programs.  "Installation source for the product is not available.  Verify that th

  • Robohelp is not "seeing" files

    I was struggling with Tortoise SVN on my computer, trying to get my Robohelp projects out of source control. I am not sure what happened but now when I try to generate WebHelp, I don't get the Generate wizard. Generate just runs briefly and nothing h