Loading second Infocube from an ODS

Hi SDN,
I have a cube C1 with already data in it through the ODS. I have copied C1 to C2 and would like the same data to come in C2 from the ODS. After I create the update rules, how do I get in the data into C2?
Thanks

Hi All,
Thanks for the suggestions.
Using 'Update Data Targets' I am unable to schedule because though I see C2 in Data Targets, the message says that delta for the request so and so already processed. I selected 'Initial Update' to set up the load. I did uncheck C1 from the list of data targets. I also cannot do anything with Data Selection tab.
If I use the method of creating an export data source from C1, how can I avoid that it does not get transported to QAS or PRD?
Please help.
Saf.

Similar Messages

I need to load an InfoCube from an InfoSet - Is this possible in 2004s?

Greetings,
This question looks long, but it's really not. I'm just trying to give a lot of detail about the screens that I am seeing. Anyway, here goes:
I am in 2004s. I want to load an InfoCube from an InfoSet. I know that an InfoSet is just a view and does not physically store data, but recent documentation published by SAP seems to indicate that this is
possible in 2004s (There is a document called "Developer Guide - 2004s" that says the following:
"InfoSets are an additional, easily manageable data source for generic data extraction. They allow you to use logical databases of all SAP applications, table
joins, and further datasets as data sources for BI". )
So... that led me to believe an InfoSet could load an InfoCube. In other words, the InfoSet would be the source and the InfoCube would be the target. I am in RSA1, and I right-click on the cube that I want to be the target. I select the "Create Transformation" option from the context menu. In the "Create Transformation" screen that pops up, I enter "InfoCube" in the target object type field and the name of the InfoCube in the target name field. I enter "InfoSet" in the source object type field and the name of the InfoSet in the source name field.
I get a pop-up that says "Cannot generate proposal". I click the green arrow, and then I get an error message
that says "Transformation does not exist (see long text)".
When I click on the error message, I get the following information in the Performance Assistant:
"Transformation does not exist (see long text)
Message no. RSTRAN010
Diagnosis
The transformation specified by transformation ID , source and target , does not exist.
System Response
The system terminates processing."
Any help would be much appreciated! It seems like it must be possible to use an InfoSet as a source in a data load, or else it would not be an option in the "Create Transformation" screen. ????
I've also tried right-clicking on the cube and selecting "Create Data Transfer Process". I enter the same information on this screen: the types and names of the source and target. Then I get a pop-up that says "Source and target have not been linked with a transformationDo you want to generate a default transformation?". There are two buttons I can click: one labeled "Yes" and one labeled "Abbrechen". I choose "Yes", because I have no idea what "Abbrechen" means.
Then I get the same pop-up from before: "Cannot generate proposal". I hit the green arrow, and I'm back in the
"Create Data Transfer Process" screen. So... I'm stuck in an infinite loop of screens that I can't get out of.
If someone could help, I would be grateful! THANK YOU VERY MUCH!

Thank you so much, Ram! I REALLY APPRECIATE YOUR HELP!
I am wondering if it possible to manually create a node in RSA6 for the InfoSet. I tried it by doing the following:
I went to RSA6 and clicked on the white icon for "Create Node". I then entered the number "8", followed by the name of the InfoSet. (I entered an "8", because all our DataSources seem to start with an "8". I'm not sure why.)
The DataSource now shows up, but when I double-click on it, nothing happens. When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
Also, do you know where I can get my hands on the white paper?
Thanks again!
Regards,
Sarah-Jane

Filtering data loaded to an infocube from an ODS

Hello people!
I have a question for you.
I have an ODS (lets name it ODS_1) that has for example information about sales and infcubes (CUBE_A and CUBE_B) that uses the ODS as DataSource.
In ODS_1 I have the information for all sales, but then, I want to load the information of a sale in CUBE_A or CUBE_B depending on the value of a characteristic of the ODS...
Is it possible? how?
Thanks in advance, any clue would be appreciated and awarded.

hi Sebastian,
you can use that particular characteristic in the data selection tab of the infopackage which you will be creating to load the data from ODS to Cube. for infopackage_A where you will select characterestic value as A, u can select cube_A as data target and in the infopackage_B with characteristic value B select data target as infocube_B.
hope this helps.
regards,
manish

Reload an infocube from an ODS with erroneous information

Hi:
I have an Infocube that is update from an ODS. My problem consists in the R/3 system from LO, they put an invalid string. It pass without a problem from R/3 to the ODS. But when it makes the request to load the infocube it displays red light because of this string.
I made a selective delete from the ODS, but when i run the chain proces just to load the data from ODS to the infocube it continue this mistake.
Is there any table that I have to delete?
Points for helpful answers!!
Thanks

Hi Herr,
The selective delete from the ODs would just remove the records from the Active table of the ODS, not the Change logs (from which the delta records move). If you like you can set up error handling in the InfoPackage loading to the cube, so that this record is held back and the others go through and reporting is enabled. Or if the record is required and removing it will change the numbers, you can try to change this record in the PSA and correct it, then load from PSA to the cube.
Hope this helps...

Data Loading into Infocube from ECC.

Hi,
Can someone help me with the list of steps to be followed for loading data into infocube using Data trasnformation process. Steps to be perfomed in the system.
Also please share any links on various methods of loading data into infocube from ECC.
Thanks!

The steps would be *** foloows:-
1) Create the info-objects.
2) Create the infocube. If you a Planning area and the cube is a replica of the PA you can use /SAPAPO/TS_PAREA_TO_ICUBE to create the infocube.
3) You create a source system as a file system.
4) You create the datasource with the relevant fields.
5) You create a transformation for the cube using the datasource you created in step 4.
6) Last step would be to create DTP. When you create the DTP, on the first screen, check the checkbox for "Do not load data from PSA". This will give you additional fields to enter the file path. When this DTP is created and generated, goto the last tab of the DTP to execute.
This will help you to directly pull the data from the file and load it into the cube.
You can also create a Process chain to automate this process.
Hope this helps.
Let me know in case of any more information.

How to load an infocube from more than one source system?

HI all,
Can u please tell me how to load an info cube from more than one source sytem?

Hi,
same confiig is required for one or more source system. (From Data source to update rule, obviously cube remains the same).
Its the infopackage execution which loads the data from different source system.
Regards,
Nawanit

Error while loading Delta request from one ODS to another

Hi,
I have 2 ODS . ODS1 is the source ODS and ODS2 is the target ODS. ODS1 has full loads daily
I have initialised delta from ODS1 to ODS2 and i was loading delta on a daily basis.
Today while loading from ODS1 to ODS2 it failed. Then i deleted the data from ODS2 (Target ODS) and tried loading again. But it again said 'No delta possible'. So i deleted the full loads from ODS1. But when i load again it says the previous delta is invalidated since the full loads in the ODS1 are deleted. Can anyone of you please let me know how to handle this situation without re-initialising.
Regards,
Pramod

Hi,
I am not sure if you can go ahead without initializing again.
I feel you may not have reset the datamart before pulling the repeat delta. This was a mistake. On top of that you have pulled a Full request. It should have been ideally a full repair.
If you still have that full request in target try converting that into full repair by using this SE38 > RSSM_SET_REPAIR_FULL_FLAG (Change a full request to full repair request ) .
If it works you have a chance of continuing with your deltas. But you may have lost the last delta.
If it doesnt work and you have not pulled any delta after that load you have two options to retrieve the delta.
1. See if its in PSA. then pull from PSA and once done force request to green , next delta should be fine.
2. If its not there try reset the datamart in source ODS and pulling the delta again.
If both doesnt work you may need to perform full repair and then reinit.
Thanks,
JituK

Data loading to Infocube from SAP R/3 System

Hello Friends,
I started load in BW four days back in background. Initially i could able to see the load running in SM50 t.code. This load has 28 data packets. Out of 28, five data packets are successfully updated data to the cube, Remaining data packets are not through yet and in yellow colour. Now there is no job running in background in SM50 and i didn't find any runtime error in ST22.Source system is SAP R/3.The data is related to Employee HR Position.
Could anyone plz throw some light on this.Thanks in advance. Your responose will be appreciated.
Regards,
Sreekanth

Hi,
for this u have to chk the luw entries in SM58 of R/3....
if there are some entries ur load won't be successful...
and also chk these all
1) wht in the details of extraction is ur data selction ended?
2) after that chk in sm58 there shuld be no entire there...
3) still ur load is in yellow, u can maually change the status to RED and goto each data packet and right click and select manual update...this takes soemtime to turn into green...
do the same for all packets in yellow and then after the whole packets r green u can change the status from red to back to technical status..
rgds,

OBJECTS_NOT_CHARLIKE when loading to infocube from DTP

Hello Guru's,
I am trying to load a simple excell spreadsheet into our BW system.
I created the data source, turned excell into matching format then saved as csv, created a conversion to be able to load from the data source, then created the info package and finally created the dtp to load (it's a full load, not delta package)
When i start InfoPackage it loads the excell to PSA perfectly but when i start the DTP i get an error that says
OBJECTS_NOT_CHARLIKE
I checked all the characteristics and keyfigures have matches in the cube, also in the conversion i used no rutines.
I am waiting for your answers, thanks in advance for helping,
Davut

Here are the fields in Data Source
1     /BIC/ASEM_POIT                              ASEM_POIT     CHAR     16     0     16
2     /BIC/ACOMCODE                              ACOMCODE     CHAR     4     0     4
3     /BIC/ABOLGE                              ABOLGE     DEC     3     0     2
4     /BIC/AARMATOR                              AARMATOR     DEC     5     0     4
5     FISCPER3     Posting period     0FISCPER3     NUMC     3     0     3
6     FISCYEAR     Fiscal year     0FISCYEAR     NUMC     4     0     4
7     /BIC/LHGCH013                              LHGCH013     CHAR     2     0     2
8     /BIC/ASMIKTAR                              ASMIKTAR     QUAN     17     0     17
9     VERSION     Version     0VERSION     CHAR     3     0     3
10     UNIT     Unit of measure     0UNIT     UNIT     3     0     3
11     FISCVARNT     Fiscal Year Variant     0FISCVARNT     CHAR     2     0
And this is a sample line from our excell file
AC01605018      AG03     8     4     1     2010     20     1406     4   ADT     K4
I hope it is clearly viable.
Thanks for cooperating again.

Error During Load Infocube from ODS

Hi guys i hae an infocube and an ODS i load data to the ODS directly from SAP and its OK but i have an error when i try to load data from ODS to infocube, i`ve created an update rule from ODS to infocube theres an error in the load request "Load Request is invalid" i try to load to infocube from ODS in many ways Full, Init Delta but i have the same error in all of them.....i need to do something before or i need to change in any way the data targets.....
I hope somebody could help me with this.......

HI,
Activate the data in ur ODS. Then right click on ur ODS n choose "create export datasource". Now right click ur ODS and go to "Manage" and make sure that the QM status is green and the Datamart status is checked with a green mark. Now carry on the load from ODS to infocube.
Hope this helps...Let me know
Regards,
R.Ravi

Problem in loading transactional data from to 0MKT_DSO1(ods) to 0MKTG_C01

Hi,
I am trying to load lead transaction data to the standard Crm lead management cube from ODS.There is a problem while loading transaction data from 0MKT_DSO1(ods) to the infocube 0MKTG_C01 as the field 0STATECSYS2(CRM STATUS) is set to 10 in ods -meaning incorrect transaction. This feild is not there in the infocube.
There is a routine in the cube that deletes data records with (0statecsys2) set to 10.
THIS field is not coming in the transaction.
so, where can i see the master data in crm source system? and why is that feild getting set to 10 ?
thanks in advance!

Thanks for the reply..
I have checked the Fact table which shows
1. packet Dimension
2. Time dimension
3. Unit dimension.
I have kept the 0CALDAY as the time characteristics.
Sample data i have loaded from ODS to Cube.
Sample data in ODS.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
I have loaded this data in Cube with Full Upload.
Data in Cube.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
Again i am loading the same data to cube
Data in cube after loading.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
800001___________12/02/2009____15
The data is duplicated and it is not cumulating.
Am i missing anything on this.
Pls help..
Thanks,
Siva.

Load from 3 ODS to 1 cube

Hello All,
Our requirement is to load the cube from 3 ODSs. Each time we are loading the data from the 3 ODS to Cube the load gets failed due to job getting terminated in the source system.
POP UP for the ERROR:
Express document generated error in data selection Check load from Author.
ERROR TERMINATED:
Job in source system terminated --> Request is set to red.
Message no. RSM078
We think There is Some problem in the data selection from the ODS.
Please suggest us some solution for this.OR a check list for loading the data from 3 ODS to a cube.
Thanks & Regards,
Pallavi.

Check SAP Note: 869445.
Check this:
Job terminated in source system --> Request set to red
Load data into InfoCube 0FIGL_C10
Thanks

How to load data from a ODS to CUBE Request ID - by - Request ID?

How to load data from a ODS to CUBE Request ID - by - Request ID?
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "data mart status of request" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.

Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley.

Error while loading data from one ODS to anther ODS

Hi all,
while loading the data from one ODS to another ODS, we are getting error message - Error: No match found in target. No Space on ODS.
I have done a runstat on these tables of the ODS.. but the issue repeated.
Can anyone tell how do we solve this issue.

Check if you get any other Dump message in ST22 to see if it is due to some space availability in the DSO or underlying tables.
Or Post in detail if any other errore message is available.

Loading the cube from 3 datasources and getting 3 records for each keyfield

Hi All,
I am loading an InfoCube from 3 separated datasources. These 3 datasources are UD Datasources and their unique source system is UD Connect.
Each of the datasource contains a unique key field 'Incident Number' (same as we use have in Datasources for DSO).
The problem is, when I am loading data with these 3 datasources to the cube, for each 'Incident number' there becomes 3 records.
We have reports on this Infocube and the report also displays 3 records for each incident number.
If I remove Incident Number key field from 2 of the Datasources, the data from these datasources do not reach to the Cube.
For many of you, this may be a minor problem ( or may not be a problem at all !!! ) , but as a New Joinee in SAP field, this has become a showstopper issue for me.
Please suggest.
Thanks in Advance.

Hi Pravender,
Thanks for your interest.
The scenario is, I have 3 datasources form the same source system, All the 3 datasources have different fields except 'Incident Number'. So, each and every field has only one value in the report. But due to 3 separate datasources, it creates 3 records displahying values of each datasource in a separate record.
There is no field in the query output which is having different values for the different source systems. Due to 3 records in the cube, one record will contain the value for a particular field and the other two records will show a Blank for that field.
Regards.

Loading second Infocube from an ODS

Similar Messages

Maybe you are looking for