Loading Stock intialising data.

Hi Experts,
Please can you explain me the total steps to load data from DS 2LIS_03_BX.
Thanks in advance.

Hi...
The DataSource 2LIS_03_BX is used to extract an opening stock balance
on a detailed level (material, plant, storage location and so on). At
this moment, the opening stock is the operative stock in the source
system.
The DataSource 2LIS_03_BF is used to extract the material movements
into the BW system. This DataSource provides the data as material
documents in the MCMSEG structure.
1.   Initialization of the current stock (opening balance) in the R/3
source system (transaction code in R/3: MCNB).
2.   Setup of statistical data for material documents in the R/3 source
system.
3.   Loading the opening stock balance (InfoSource 2LIS_03_BX) into
InfoCube 0IC_C03. In the InfoPackage, choose the upload mode Create
opening balance.
4.   Compressing the request containing the opening stock that was just
uploaded. Make sure the "No marker update" indicator is not set.
5.   Loading the historical movements into the InfoCube 0IC_C03 via the
DataSource/InfoSource 2LIS_03_BF. Choose the upload mode "Initializing
the delta process" here.
6.   After successfully uploading the historical material movements,
the associated request has to be compressed. You must make sure the "No
marker update" indicator is set.
7.   Schedule the V3 update for 03 area.
8.   Delta uploads can be started with the DataSource 2LIS_03_BF from
this point in time on.

Similar Messages

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Stock Report Date Wise

Dear All
I am devlop new Stock Report Date wise
my output follows
Material Plant Storagelocaton Saleorder OPenning stock Closing Stock Total
Which Table stored that details?
how will calculated?
Thanks and Regards
Suresh

hey
i think the following tables
will be helpful for the report:-
1>MARA
2>MBEWH
3>MSEG
4>VBRP
hope this will help
good luck
harry.

Data Refresh Error: We cannot locate a server to load the workbook Data Model.

Hello,
Recently I have developed a PowerBI Report using Excel Workbook with external data source. It refreshes successfully for some days and then starts throwing error on every scheduled refresh as "We cannot locate a server to load the workbook Data
Model."
The workaround solution is to restart the application server which has SQL Server Power Pivot Services Installed which will again work for some more days and again start throwing error.
So, I am looking for permanent fix for it.
Following are additional details about our SP Farm:
No. of front end servers: 2, Application servers:2, DB servers 2 with windows fail over cluster.
PowerPivot Server is installed and configured from App 2 server.
Error Log from event viewer:
Unable to load custom data source provider type: Microsoft.PerformancePoint.Scorecards.DataSourceProviders.AdomdDataSourceProvider, Microsoft.PerformancePoint.Scorecards.DataSourceProviders.Standard, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.Type.GetType(String typeName, Boolean throwOnError)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.InitializeCustomDataSourceProviders()
PerformancePoint Services error code 10107.
Thanks,
Ibrahim

Hi ibrahim,
Please try to do the following steps:
1. Install "1033\x64\SQLSERVER2008_ASADOMD10.msi" from
http://www.microsoft.com/en-us/download/details.aspx?id=26728
2. In the Application Management section of the Central Administration home page, click Manage service applications.
On the Manage Service Applications page, click the Excel Services service application that you want to configure.
On the Manage Excel Services page, click Data Model.Click Add Server.
In the Server Name box, type the name of the Analysis Services instance that you want to add.
3. Check the thread below:
https://social.technet.microsoft.com/Forums/en-US/ecc18319-88d8-4dd0-bafd-fa0d2edceffb/external-data-refresh-failed-we-cannot-locate-a-server-to-load-the-workbook-data-model?forum=sharepointadmin
More information:
https://timpanariuovidiu.wordpress.com/2013/02/14/71/
https://support.microsoft.com/kb/2769345?wa=wsignin1.0
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

PowerPivot Data Refresh Fails - We cannot locate a server to load the workbook Data Model

Hello,
I have installed sql01\PowerPivot instance of Analysis services on my existing SQL Server and configured it per Configure Power Pivot for SharePoint 2013
http://technet.microsoft.com/en-us/library/dn456880(v=office.15).aspx . I did not install a second Database Engine on the server.
I created an Excel 2013 workbook using the Excel 2013 PowerPivot add-in and saved it to my SharePoint BI Center Document library.
When I try to refresh my workbook, I get 2 errors in the SharePoint log.
http://support.microsoft.com/kb/2756665?wa=wsignin1.0 indicates the sproc is deprecated, but that does not help me fix the issue.
Log errors:
Following error occured while trying to execute a sql query: System.Data.SqlClient.SqlException (0x80131904):
Could not find stored procedure 'DataRefresh.GetSchedule'.
EXCEPTION: NoAvailableStreamingServerException: We cannot locate a server to load the workbook Data Model.
macrel

Hi Marcel,
Based on my research, it seems that you have Microsoft SQL Server 2012 PowerPivot for SharePoint 2013 add-in installed on a computer. When you perform a data refresh operation on some PowerPivot workbooks in Microsoft SharePoint 2013, you receive two error
message.
As to the first error, this issue occurs because the Custom Properties on the Excel workbook are not correctly cleared before you set a new serialized schedule. This causes an extra custom property to remain after you set the new schedule. Therefore, the
new schedule fails. To fix this issue, please
install Cumulative Update 9 for SQL Server 2012 SP1.
As to the second error, please
running a repair using PowerPivot configuration wizard for SharePoint 2013. For more information about Troubleshooting PowerPivot Data Refresh, please see:
http://social.technet.microsoft.com/wiki/contents/articles/troubleshooting-powerpivot-data-refresh.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

XEM - Unable to load the initial data or the variances(delta) data into sys

I am installing xEM 2.0 SP 10 (SAP xApp Emissions Management) in a windows environment with SQL 5000. I installed xEM on NW 2004, usage types AS Java and EP 6.
I am attempting to load the initial data or the variances (delta) data into the system. Instruction is on page 15 in the install guide.
I am supposed to enter the following in the command line:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=[JDBC Driver];[JDBCUrl];[User];[Password]
Example command for import into SQL Server:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password
The customer I am with is running the xEM database on a different instance. This is where I run into a problem. I am not sure how to specify the instance in the script. This is what I have attempted so far:
C:\>cd temp\load
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43;SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establishing socket. Connec
tion refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establi
shing socket. Connection refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection ref
used: connect
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534;SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user
'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Lo
gin failed for user 'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534:SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>
My last attempt was a command using colons and semicolons with the following results. The closest (there was a significant delay before the error or failure) appears to have been //PRODSQL43;SQL3:1534; (second attempt). The error listed from this attempt is   "Error establishing socket. Connection refused: connect".
I also checked the default database that user SAPPEMDB has in place and it is assign the correct database.
Please help.
Message was edited by: Owner
        Mike Smayrabunya

Hey,
It looks like one of the following:
1. The DB is down,
2. The user SAPPEMDB does not have the right authorization.
3. The password of the user SAPPEMDB is not password
4. The syntax is incorrect
in order to find what is the problem,
please:
1. Login in the the DB PRODSQL43:1534 with the user "SAPPEMDB" and the password "password",
this will eliminate the options 1 - DB down, 2 -SAPPEMDB does not have authorization and 3 - password of the user SAPPEMDB is not password.
2. If the login failed, than please run sql trace with security elements (in the client there is a tool called "SQL Profiler"
3. If the login is correct, than you check the syntax of the command:
"java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password"
According to the error message "Error establishing socket. Connection refused"
it looks like The DB is down or syntax is incorrect.

External Data Refresh Failed. We cannot locate a server to load the workbook Data Model. ThisWorkBookDataModel

Hi All,
I have been trying to fix this for days now. I have tried solutions in many articles but to no avail. So while the error message is something you may have seen may times, I just can't find a solution in my case.
This is the error:
And in text just in case the image isn't viewable:
"External Data Refresh Failed. We cannot locate a server to load the workbook Data Model. We were unable to refresh one or more data connections in this workbook. The following connections failed to refresh: ThisWorkBookDataModel."
What is worse is I have checked the ULS (SharePoint Trace Logs), the Event Viewer Logs and the OWA Logs and I cannot find a specific error that would help pin point the problem.
Excel Workbook
So what am I doing? I have an Excel 2013 workbook and I create an "SQL Server" connection to the AdventureWorksDW database, add a pivot table and a pivot chart, test in in Excel and all works fine.
I save the Excel workbook to SharePoint 2013 and then select "Data" then "Refresh All Connections" and then I get the error in the picture above.
Even more puzzling is I have another Excel workbook that also has pivot tables and pivot charts in the AdventureWorksDW2012Multidimensional cube database in "SQL Analysis Services" and this works fine. Hmmm.
My Environment
My environment is Windows 2008 R2 Server, SharePoint 2013 with the April Service Pack1 and a separate server with OWA2013 SP1. It has an SQL Server 2008 R2 database which has been upgraded to SQL Server 2012.
Data Model Settings
In Excel Services this is set to my server name which is "server-name". As I do not have instances all I can enter is the server name. As this works everywhere else including the workbook outside of SharePoint I do not think this is the problem.
But I could be wrong.
Unattended Account
I have set this up for the PowerPivot Services App and Excel Services App.
ODC Connections in Excel
I have tried all 3 authentication modes, Windows, Secure Store ID and "None" which is the unattended account. I have not tried the other connection types, should I?
Not in WOPI
I am not in WOPI mode.
AD Accounts
I have added permissions in the SharePoint Services and SQL Server, and as they work in Excel outside of SharePoint, I do not think it is a permissions issue. I could be wrong of course, but the problem is in one of SharePoint, OWA, AD,
SQL Server, Excel, and Windows Server.
Isolate the Error
Below is a list of errors I think are relevant but they do not tell me much. The SharePoint logs are not really giving me an error that tells me what to do and where to do it, or even why it cannot refresh, (perhaps not noticeable by the untrained eye).
Problem with SQL Server Not Analysis Services
So my cube database in analysis services works fine in SharePoint/OWA but not the databases in sql server. This is my best clue but I have no idea what it means. Why would it work with an Analysis Services connection but not an "SQL Server" connection?
It Works Outside of SharePoint
If I run the excel worksheet outside of SharePoint all works fine. When inside OWA this is where the refresh error occurs.
Errors from Event Viewer on SharePoint Server using ULS Viewer
"Failed to create an external connection or execute a query. Provider message: There are no servers available or actively being initialized., ConnectionName: , Workbook:"
"Refresh failed for 'ThisWorkbookDataModel' in the workbook 'http://server...'. [Session: 1.V22.26itT0lx8piNFeqtuGVhN214.5.en-US5.en-US36.98c0e158-9113-46e9-850e-edda81d9ed1c1.A1.N User: 0#.w|ad\testuser1]"
And an error in the ULS under the "Data Model" category:
"--> Check Deployment Mode (server-name): Fail (Expected: SharePoint, Actual: Multidimensional)."
This last error, as it turned out, defined the problem concisely, although I was yet to work out what it meant in some detail.

I finally solved this myself (or should I say with the help of several key articles).
The refresh did not work because the database was not in "SharePoint Mode". Yes, SQL Server has modes, 3 of them in fact.
If you installed SharePoint to the default SQL instance which would be called <servername> then you cannot use this default instance for Excel 2013 workbooks in OWA 2013 because the refresh only works if the database is in SharePoint mode.
So what are these 3 modes? The Deployment Mode property in the msmdsrv.ini file has them as:
0 = Multidimensional mode (the default whenever you install SQL Server normally)
1 = PowerPivot for SharePoint mode
2 = Tabular mode mode
How do you know what mode you are in? That's easy, open SQL Studio Manager and connect to all your SQL database engine instances (ignore Analysis Services or SSRS as they are not database engines). If you only have the default instance then that is almost
definately in Multidimensional mode which is the default and what SharePoint installs its databases to.
You must have an instance called <servername>\POWERPIVOT. This instance is the "sharepoint mode" needed, and the default instance name when you install an SQL instance in this mode.
If you don't see <servername>\POWERPIVOT in SQL server then you are not in "sharepoint mode". It is more accurate to say, you do not have an instance that is in sharepoint mode. This is because you cannot simply switch modes on an SQL server.
You have to install a new instance in the required mode, thats the only way.
That's easy enough. Load up the SQL Server setup CD and run setup. Install a brand new instance and select "SQL Server PowerPivot for SharePoint" when you get there in the wizard.
Now you will have the default instance that stores all the SharePoint databases and that is in mode 0, and a new instance called <servername>\POWERPIVOT that is in mode 1. The "<servername>\POWERPIVOT" instance connection is what you
will use for Excel 2013 when rendering in OWA 2013.
You also need to ensure OWA 2013 is not in WOPI mode for Excel worksheets. See the last link below for more information about WOPI.
Next you should go to the Excel Service App in CA and click Data Model Settings and add the <servername>\POWERPIVOT instance.
Then you have to either turn off the firewall on the SQL server machine, or create an inbound rule on the Windows firewall to open the TCP port for the <servername>\POWERPIVOT instance:
1. Start Task Manager and then click Services to get the PID of the MSOLAP$InstanceName.
2. Run netstat –ao –p TCP from the command line to view the TCP port information for that PID.
Finally, you can now create Excel 2013 workbooks that run in OWA without refresh errors, as long as you are connecting to the <servername>\POWERPIVOT instance. Hooray.
REFERENCES
Look for the string "There are no servers available or actively being initialized" in this article:
http://blogs.msdn.com/b/analysisservices/archive/2012/08/02/verifying-the-excel-services-configuration-for-powerpivot-in-sharepoint-2013.aspx
Determine the server mode:
http://msdn.microsoft.com/en-au/library/gg471594(v=sql.110).aspx
Install the SharePoint PowerPivot instance (aka SharePoint mode)
http://msdn.microsoft.com/en-au/library/eec38696-5e26-46fa-bc83-aa776f470ce8(v=sql.110)
Open the port for the new SQL instance:
http://msdn.microsoft.com/en-us/library/ms174937(v=sql.110).aspx
Turn Off WOPI for Excel OWA
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/01/31/powerpivot-for-sharepoint-browser-refresh-fails-data-refresh-not-supported-in-office-web-apps.aspx

HT1766 I have forgotten my iPhone backup password. Is there a way of getting it as I am trying to load my old data from iPhone 4 to an iPhone 5?

I have forgotten my iPhone backup password. Is there a way of getting it as I am trying to load my old data from iPhone 4 to an iPhone 5?

If on a Mac, and you elected to save such to your Keychain, you can recover it from your Keychain. Otherwise, you can't.
While you can continue to sync/backup, if you can't remember it & want to remove it, you'll have to delete your existing backups & restore the phone as a new device. Your data will be unrecoverable.

Error in Loading Project master Data into BW from R3

Hi Experts,
Actually I am trying to load Project Master Data from R3 to BW through a BW Process chain, Its a daily activity which we are performing since long time.
But since last 2 days loading is getting failed with an error in ST22 in source system (R3):
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Date and Time          27.09.2011 01:47:15
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_CGPL_TASK==================CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "PREPARE_FOR_RELOAD" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "ME->OUTLINE_PARENT").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
I tried to reload the data but no help, I am not sure how to reolve this issue, I also contacted to BASIS even they are not aware of this error.
I am seeking help from you guys.
Please help to overcome this problem...!
Thanks.

it seems basis issue
howver check below links
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/objects_objref_not_assigned-1793688
OBJECTS_OBJREF_NOT_ASSIGNED error in a background execution
thanks
pathak

Error While Loading the Master Data from R3

Hi Gurus,
I am loading the masterdata from R3.I have enhanced the Datasource .In that datasource there is a field DATUB ( Valid To Date).For this field I have wriiten the User Exit at the R3 side.Now I am loading the data in BW.But I am not getting the values for DATUB field in the BW, though they are there at the R3 side.
I have done following to analyse the issue.
1.Have checked the datasource at the R3 from RSA3.Its populating the field DATUB correctly.
2.Have deleted the whole masterdata and tried to load again.But no success.
3.Have tried to load the data for the perticular Bill of Material(BOM).Then it get loaded correctly along with the value of DATUB.But when i tried loading the entire data i am not getting the field DATUB populated.
Please help me out.Its urgent.
Thanks.
Shalaka

Hello,
I finally got the solution to my problem.
If you append a field to generic datsource then you should check the tick in datasource for "field only". Or else you would not get the values handed over to BW.
Please check following link for more details about this "field only" setting for Generic datasources.
http://help.sap.com/saphelp_tm70/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
Regards,
Anuj

Unable to Load the XML data file in to RTF template

Hi Team,
We are working on the XML publisher reports,where the xml data is containing the Japanese Characters.
I am facing an error while loading my xml data which has the japanese characters values in between the XML tags into the RTF Template.Though i have installed Japan fonts in my system,still unable to load the data.
Could any one please help me out in this regard.
Thanks in Advance.

Hi;
Hi please clearfy below question for can make you fast help
1. What is your OS?
2. What is your EBS verison?
3. What is your DB version and Db character set?
Also check:
About Oracle XML Publisher Release 5.6.3 [ID 422508.1]
Regard
Helios

Error while loading 0Plant master data in PSA

Hi,
i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
<i><b>'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked'</b> .</i>
We are not using SD module and so no sales organization data is maintained have through a couple of posts posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.

Hi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Error when loading the master data

Hi all,
Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
Thanks in advance.
Regards,
Shaik.

Hi,
Please go through the following threads:
PERFORM_CONFLICT_TAB_TYPE shortdump during data loading into ODS
Perform_conflict_tab_type error
PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
Next time you might want to just search the forum first... lots of surprises!
Hope this helps,
Cheers,
Gimmo

'Overlapping Time Intervals' error while loading the Master Data

Guys,
          Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM         Valid To                  Valid From                 Edition
1001             12/31/9999             04/01/2010                2010.1.1
1001             01/31/2010             03/01/2010                2010.1.2
1001             12/31/9999             02/01/2010                2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.

FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash

Getting the error while loading the master data

Hi
i have tried to delete the master data using right click and delete master data, but still there are data.
Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
and data load got failed with error message "master data/text of 0vendor already deleted "
and due to this i could not able to load my other infoprovider (which have 0 vendor).
can any body help me, it very urgent...
thanks and regards
Anupam

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Loading Stock intialising data.

Similar Messages

Maybe you are looking for