Loading the cube from 3 datasources and getting 3 records for each keyfield

Hi All,
I am loading an InfoCube from 3 separated datasources. These 3 datasources are UD Datasources and their unique source system is UD Connect.
Each of the datasource contains a unique key field 'Incident Number' (same as we use have in Datasources for DSO).
The problem is, when I am loading data with these 3 datasources to the cube, for each 'Incident number' there becomes 3 records.
We have reports on this Infocube and the report also displays 3 records for each incident number.
If I remove Incident Number key field from 2 of the Datasources, the data from these datasources do not reach to the Cube.
For many of you, this may be a minor problem ( or may not be a problem at all !!! ) , but as a New Joinee in SAP field, this has become a showstopper issue for me.
Please suggest.
Thanks in Advance.

Hi Pravender,
Thanks for your interest.
The scenario is, I have 3 datasources form the same source system, All the 3 datasources have different fields except 'Incident Number'. So, each and every field has only one value in the report. But due to 3 separate datasources, it creates 3 records displahying values of each datasource in a separate record.
There is no field in the query output which is having different values for the different source systems. Due to 3 records in the cube, one record will contain the value for a particular field and the other two records will show a Blank for that field.
Regards.

Similar Messages

Can i get the iphone from USA and get it unlocked in India

can i get the iphone from USA and get it unlocked in INdia

No. Any locked phones purchased in the US cannot be unlocked.
You can just buy an unlocked phone direct from Apple in the US, but only if you are physically in the US.
Also, note that your warranty will only be valid in the US.

I tried to restore my iPhone 5 to factory setting and when i did it attached to a person i do not know apple id so now i can't use the phone. I purchase the phone from sprint and used it for 2 years and never had a problem.

Hi - I tried to restore my iPhone 5 to factory setting so I could give it to my son but when I did it reset to someone else's apple id. I don not know this person and I am the only owner of the phone purchased from Sprint. How do I get this phone to work?

Its called Activation Lock. Take the phone to Sprint and explain your problem. It is their fault and responsibility to properly reset used phones.
-Ethan

Hi, I can't load the videos from youtube or other sites for 2 days now. It waits a long time to open the videos, or waits until all the video is downloaded. It wasn't like that until 2 days ago. How can I fix this problem? Thanks in advance.

can't watch videos, waits a long time to open it, or it never opens it.

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

When i open my mail app it appear tp me onlu the list of in and out mail , for each account but I cannot read test an attachmentbecause I n tne right side appear only the subject not the message. qhat should I do?e

may I ask if this is aproblen of configuration or simething else?
I will be grate to whom can give me suffestions
giofrosr

See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

I have not synced my iphone to my new computer. My old computer is dead. How do I keep the music on my iphone from disappearing and get synced to the new computer?

I have not synced my iphone to my new computer. My old computer is dead. How do I keep the music from disappearing and get synced to the new computer?

This will cost you http://www.wideanglesoftware.com/touchcopy/index.php
or see this doc http://discussions.apple.com/docs/DOC-3141

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Regarding Loading the data from DSO to cube.

Hello Experts,
I have DSO which loads data from psa using 7.0 tranformation (using DTP). And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
Please help me with this.
i want to load the data in the init request to cube..
Thanks

Hi Shanthi,
Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
Thanks

How get all record from master and matching record from detail

hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamir

hi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid

HT1750 I purchased a new iMac, I have an old iPod mini I am trying to sync my iTunes library on my new Mac with my iPod. I purchsed additional music yesterday but I cannot get it to sync to load the music from my computer to my iPod.

I purchased a new iMac, I have an old iPod mini I am trying to sync my iTunes library on my new Mac with my iPod. I purchsed additional music yesterday but I cannot get it to sync to load the music from my computer to my iPod.

From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

We have a new iPod Classic and would like some help in choosing "Import Settings" (under Peferences) when loading the iPod from the Mac. We want to be sure that we can maintain a constant sound level. Used with Bose sound dock. OS 10.6.8 iTunes 10.6.1.

Using an iPod Classic on a Bose sound dock....when loading the iPod from the Mac, what "Import Settings" (under iTune "Preferences"), should be used to maintain a constant sound level when playing music? Mac OS 10.6.8, iTunes 10.6.1.
There are many Import Settings available and it is somewhat confusing. Any suggestions?

Go to iTunes>Preferences>Playback. Tick "Sound Check."
iTunes: About Sound Check

I downloaded several cds to my external hard drive in .mp3 format. Later, I copied them to iTunes. The songs only play when the external hard drive is plugged in. I tried to load the songs from iTunes to my iPhone and the songs don't play.

I downloaded several cds to my external hard drive in .mp3 format. Later, I copied them to iTunes. The songs only play when the external hard drive is plugged in. I tried to load the songs from iTunes to my iPhone and the songs don't play. I thought iTunes allowed me to transfer music to my iPhone and play it. What am I doing wrong?

Hi skoorb1,
When adding music to iTunes, you can set it to either make a local copy of the file, or simply point to the original location of the file (for example, on an external hard drive). If it is set to do the latter, it will not be able to play or transfer those files when the external hard drive is not plugged in. You may find the following article helpful:
iTunes: About the Add to Library, Import, and Convert functions
http://support.apple.com/kb/ht1347
Regards,
- Brenden

I downloaded OS X 10.9.5 and when I attempt to load the program from OS X 10.7.5 I click on the install icon and nothing happens. How do I install the upgrade?

I downloaded OS X 10.9.5 and when I attempt to load the program from OS X 10.7.5 I click on the install icon and nothing happens. How do I install the upgrade? Can I upgrade from Lion to Mavericks? Here are my specs:
MacBook Pro
15 – Inch Core 2 Duo
Processor 2.33 GHz Intel Core 2 Duo
Memory 4 GB 667 MHZ DDR2 SDRAM
Graphics ATI Radeon X1600 256 MB
Serial Number W8****W0L
Software Mac OS X Lion 10.7.5 (11G63)
Is my system capable of running the new upgrades?
<Personal Information Edited by Host>

kar89 wrote:
I downloaded OS X 10.9.5 and when I attempt to load the program from OS X 10.7.5 I click on the install icon and nothing happens. How do I install the upgrade? Can I upgrade from Lion to Mavericks? Here are my specs:
Sounds like you downloaded the OS X Mavericks 10.9.5 Update or Combo Update. Neither will work on a version of OS X prior to OS X Mavericks. Those are only used to update an existing install of OS X Mavericks. The Combo will update any version from 10.9.0 thru 10.9.4. The Update will only update version 10.9.4.
You need the full installer of OS X Mavericks from the App Store. However, the App Store no longer offers OS X Mavericks. Yosemite is the new FREE OS X.

I want to buy a wifi 3G iPad 2 from the US apple store and get a relative to bring it down to Sri Lanka. Does it come unlocked for other cellular carriers or is it restricted and needs to be unlocked?

Hi I want to buy a WIFI+3G iPad 2 from the US apple store and get it shipped to a relative in the US to bring it down to Sri Lanka. My question is, is the iPad 2 unlocked to be used with any carrier worldwide or will i have to unlock it myself? Or is there any way to purchase a iPad 2 without selecting a specific US carrier?
Thanks,
Milinda

iPads bought in the US are not locked to a carrier, but only the AT&T version uses micro-sim cards - the Verizon model is CDMA based and doesn't use sim cards, so for that reason is effectively locked. With the AT&T version you should be able to just swap in a local micro-sim - you don't have to activate a service with AT&T

I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the firefox homepage to come up. How can I get the Yahoo homepage off and get the firefox homepage on?

I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the Firefox homepage to come up. I have tried to reinstall Firefox, but the Yahoo homepage still comes up. How can I get the yahoo page off and get the Firefox page back on?

Here are instructions to [[How to set the home page#w_restore-the-default-home-page|restore the default home page]].

Loading the cube from 3 datasources and getting 3 records for each keyfield

Similar Messages

Maybe you are looking for