Loading the hierarchy of GL account

Hi all,
I am a new to BW,could you tell me how to load the hierarchy of GL account in BW.

Hi,
I would like to know, whether you want to load the hierarchy with flat file or from R/3 ?
With Regards,
PCR

Similar Messages

Error while loading the Hierarchy from R/3 to BI.

Dear all ,
I am trying to load a hierarchy FROM R/3 to BI . When I am executing the Info package its showing an below Error.
Hierarchy object is u201CWBS elementu201D
The level of the node ID 01494179 does not suit the lev. of the higher lev. node
The level of the node ID 01494178 does not suit the lev. of the higher lev. node
The level of the node ID 01493822 does not suit the lev. of the higher lev. node
Could you please let me know what would be the reasonu2026u2026?
Regards,
Raghu

Hi
looks like there is some inconsistency in hierchy data you are tring to laod.
Check hierarchy in r3 if its ok, if yes try deleting complete hierarchy and reloading it.
You may also chose to adjust it manually
Regards
Sudeep

Error while loading the Hierarchy to 0GLACCEXT

Dear all ,
I am trying to load a hierarchy ZEM 1 that is manually created in R/3. when I am executing the Infopackage its showing an Error that
1.Record 8 :Node characteristic 0GL_ACCOUNT is not entered as hierarchy characteristic for 0GLACCEXT
2.Too many error records - update terminated
and what is the the concept of 0BAL_DPEND to be added as attribute to OGLACCEXT.
Thanks

Hi Dash ,
I am providing the long test for the error ...Also can you tell me how I should use 0BAL_DPEND field as an attribute of Hieararchy of 0GLACCEXT. Coz i am supposed to do this
<u>Hierarchy for Characteristic 0GLACCEXT with Attribute 0BAL_DEPEND
The hierarchy for characteristic 0GLACCEXT is used as the financial statement version in BW queries. To technically enable the particular exception aggregation for contra items, the hierarchy table of characteristic 0GLACCEXT contains the attribute Balance-Dependency of a Hierarchy Node (technical name 0BAL_DEPEND).</u>
The Long Error Message
Diagnosis
    The nodes NODEID = [00000194, 00001627 ] have the same node names
    NODENAME = '10000000950090 '. This is not allowed because neither node
    is a leaf and both nodes are assigned to the same characteristic
    0GL_ACCOUNT .
    Note that a maximum of 50 characters is available for message variables.
    The node name NODENAME = '10000000950090 ' might not be displayed in its
    full length.
System Response
Procedure
    Try to localize the problem. If the hierarchy is loaded from an SAP
    source system, you can check whether the extracted data is correct by
executing transaction RSA3 in the source system. If necessary, check if
the data is modified with a user exit. If the hierarchy is loaded from a
file, check the contents of this file. The problem might also be due to
an error in the transfer rules or in the transformation.
You can identify the two duplicate nodes from the values for the node ID
NODEID = [00000194, 00001627 ].
The problem can be caused by identical nodes delivered more than once
from the source. It is also possible that incorrect values for
parameters such as the node name NODENAME or validity period [DATEFROM,
DATETO] are the cause of the problem.
First check if the value for node name NODENAME = '10000000950090 ' is
correct. The node name consists of the characteristic value for the
hierarchy basic characteristic and the characteristic values of all the
characteristics compounded to this characteristic. Errors creating the
node name often result in duplicate nodes. This problem also occurs if
the node names of all nodes are initial.
If the structure of the hierarchy is defined as time-dependent, the time
validity of a node can be restricted with the fields DATEFROM and
DATETO. Duplicate nodes generally do not occur if the validity intervals
of two nodes do not overlap in time. In this case check if the fields
DATEFROM and DATETO are correctly filled.
In this case the duplicate nodes are not leaves. If you want to reuse an
existing subtree at another location in the hierarchy, you can refer to
this subtree with a link node. Possibly one of the two duplicate nodes
were incorrectly not marked as link nodes.
please Suggest What to do

My iCloud account name was inputted incorrectly when my iPhone was set up. I made a new iCloud account but my phone still automatically loads the old and unusable iCloud account. How can I update my phone to load the new and correct account?

My iCloud account name was inputted incorrectly during initial phone set up. I created another iCloud account name but it is still the old and wrong iCloud account that automatically loads whenever I access the iCloud tab on my phone. How do I replace it my new and correct account name?

She won't after the change.
Note you can use the same Apple ID in
Settings > iTunes & App Store > Apple ID: > here to share purchased music, apps and books.
Other than that each of you should use your own Apple ID for iMessage, FaceTime, iCloud, Game Center, etc.

How to load a Hierarchy after a change in the R/3 system?

Hi All,
We have a hierarchy in BW hat we extract from R/3. But now they have added two new nodes to the hierarchical structure which is not being reflected in the BW version of the hierarchy. Can you tell me how to load into BW the latest version of the R/3 hierarchy with those two new nodes??
Thanks Much for any Input,
Reddy

Hi Reddy,
If you have modified just the function module to populate the hierarchy in R/3 then the hierarchies should load fine on BW. However if you have changed the datasource and there is a datasource(active) in the transport request in R/3 then you would need to replicate the datasource in BW and then load the hierarchy. Hope it helps.
Bye
Dinesh

Flat File loading into Hierarchy

Dear Gurus,
I am trying to load a hierarchy from a flat file. I am not able to do it successfully.
I have a small doubt. Do we need to load the master data into the master data table before loading the hierarchy?
Explanation:
I have an info object zcountry and i had added zzone and zstate as external characteristics in hierarchy. the hierarchy structure should be country with 2 nodes zone1,zone2 and zone one should have 2 states under it as nodes. In this case do I need to maintain the master data in the infoobjects before loading the hierarchies with flat file.?
<b>Node ID     InfoObject     Node Name     Link     Parent ID     Language     Short-Txt     Medium-Txt     Long-Txt</b>
1;     zcountry;     CountryNode;          0;     en;     CountryNode;     CountryNode;     CountryNode;
2;     zzone1;     SouthZone;          1;     en;     SouthZoneNode;     SouthZoneNode;     SouthZoneNode;
3;     zstate;     AndhraPradesh;          2;     en;     AndhraPradesh;     AndhraPradesh;     AndhraPradesh;
4     zstate     Karnataka          2     en     Karnataka     Karnataka     Karnataka
5     zzone1     NorthZone          1     en     NorthZoneNode     NorthZoneNode     NorthZoneNode
6     zstate     Haryana          5     en     Haryana     Haryana     Haryana
7     zstate     Rajastan          5     en     Rajastan     Rajastan     Rajastan
This is how the flat file looks like.
Kindly give me a solution.
Regards
Mohan Kumar.
Message was edited by:
        mohan kumar
Message was edited by:
        mohan kumar

Dear Gurus,
I also followed the same weblog but still i am not able to do that. That is the reason why I asked the question in that detail (with the data I am trying to load).
Regards
Mohan Kumar

Download of hierarchy nodes and accounts from BW

Hi,
Does anyone know how to download a list of the hierarchy nodes and accounts out of BW? I need the list to work on some analysis and documentation.
Thanks in advance.

Hi Jackie,
Have you seen this document:How to Download a Hierarchy to a Flat File
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb
Hope this helps...

Names for the hierarchy nodes???

Dear Friends,
During the process of loading hierarchies for 0MATERIAL, I have loaded the hierarchy Product Hierarchies for Material MARA (PRDHA) and when I go to the display mode of the loaded hierarchy under InfoObject 0MATERIAL, it has the nodes numbered (1,2,3 etc) but the names of the nodes do not appear as expected. Now how do I get the names for the nodes? Is there anything that I am missing?
Also is there any documentation which explains the procedure for loading hierarchies for 0MATERIAL? All or any help will be appreciated.
Thanks
Mike

Hi,
Try this:
Load the data for 0PROD_HIER_TEXT and then see the hierarchy on Material.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Unable to see text instead of account name in the hierarchy

Dear all,
I m new to SAP BI,
I have a Fianancial Statement Item in which hierarchy and text is loaded. Now when the report is executed I want the to display the coresponding text, that is loaded with the hierarchy, with the account name. How do i do that.

Place your cursor on any of the account field, then right click --> select "properties". You will get to see three tabs under teh properties for characteristics GL account. The first tab is General, where you can see the Display option dropdown list.
From here select Key and Text, then click OK , you can find the text for the field you are looking for.

I receive an error stating user name and password are not valid on my ipad and iphone 3Gs when attempting to load email from my icloud account. When I log onto icloud from my Mac, it wont load the email either.

One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both devices and get the same message. I logged into icloud from my Mac and while I can log in, it times out when I select email and wont load the email there either. Any Suggestons?

I am having the same problem; it started about 24-36 hours ago.
I know my ID/PW combo are correct because I can access all other aspects of iCloud except mail.
iPhone -- returns incorrect ID / Password
iPad -- Same
Mail.app on Mac -- returns incorrect password error
icloud.com -- allows me to log in and use all functions accept mail. When I try to use mail it stays on a white screen for about 60 seconds then returns a dialogue box that indicates a server error.
I contacted Apple and they placed my iCloud account into something called "Troubleshooting" mode. They generated a new strong password and sent it on to "Engineering."
I suspect there are a small number ofo users like you who are affected with the same problem I am. Too small a number for it to be reported as an outtage. I suggest you call Apple and open a case to have your mail investigaged.
Hope this helps...

I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?

I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?

Set it up as new device, explained in this article, without using the backup afterwards:
How to back up your data and set up as a new device

Error while loading the master data into hierarchy

Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
Prateek

Hello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep

How to Restrict the node level in account hierarchy

Hi experts,
I want to restrict the node level in account hierarchy. I attached one example. in that if i click 6000 node again it want to show error message. for one parent node i want to create only two child node. Further if i create means it want to show error msgs and not allow to create the node..
Regards,
gopi

Hi ,
The component is bp_hier, and method is onnew_node.
IF lv_tree->is_locked( ) = abap_false.
     lv_tree->lock( ).
   ENDIF.
   CHECK lv_tree->is_locked( ) = abap_true.
   lv_index = typed_context->accounthierarchy->selected_index.
   lv_tree_node = typed_context->accounthierarchy->get_node_by_index( lv_index ).
*key = lv_tree_node->node_key.
CALL METHOD lv_api->get_node_parent
     EXPORTING
       iv_node_key        = key
     IMPORTING
       ev_parent_node_key = lv_paent_key
*      ev_tree_guid       =
*   lv_parent = lv_tree_node->parent_entity.
*    typed_context->accounthierarchy->parent_entity.
CALL METHOD lv_tree_node->get_children
   receiving
     rt_children = rt_child.
   CHECK lv_tree_node IS BOUND.
   lv_tree_node->is_leaf = abap_false.
   TRY.
       lv_proxy_node ?= lv_tree_node.
       TRY.
           lv_object ?= lv_proxy_node->bo.
         CATCH cx_sy_move_cast_error.
           lv_mixed_node ?= lv_proxy_node->bo.
           lv_object ?= lv_mixed_node->if_bsp_wd_ext_property_access~get_model_node( ).
       ENDTRY.
       lv_object_name = lv_object->get_name( ).
       IF lv_object_name = 'BuilHierarchyNode'.
         lv_relation_name = 'BuilHNodeRel'.
       ELSEIF lv_object_name = 'BuilHierarchyHeader'.
         lv_relation_name = 'BuilHeaderNodeRel'.
       ELSE.
         RETURN.
       ENDIF.
       lv_tree_node->get_children( ).
       lv_object = lv_object->create_related_entity( lv_relation_name ).
       lv_child_node = lv_proxy_node->node_factory->get_proxy(
           iv_bo = lv_object
           iv_proxy_type = 'CL_BP_HIER_HIERARCHYTREEV_CN05'
           iv_parent_proxy = lv_tree_node ).
       lv_tree_node->expand_node( ).
       typed_context->accounthierarchy->refresh( ).
       typed_context->accounthierarchy->deselect_all( ).
       lv_child_node->selected = abap_true.
       lv_child_node->is_leaf = abap_true.
*accounthierarchy
*      selectedhierarchynode
       lv_col_wrap = typed_context->selectedhierarchynode->get_collection_wrapper( ).
       lv_col_wrap->clear( ).
This is the code.
i wrote . but its not getting.

Can I load the information from my iCloud account that was backed up earlier this year to a new device since my iPad was stolen?

Can I load the information from my iCloud account that was backed up earlier this year to a new device since my iPad was stolen?

Yes you can. iCloud: Restore or set up your iOS device from iCloud

Error in the hierarchy structure - Data Load Failure

Hi
We are having a regular Master data hierarchy Full load: 0WBS_ELMT. This data load is from the SAP R/3 source system. It was failed today with following message:
Error in the hierarchy structure
Node ID 00016749 does not exist.
Node ID 00005867 starts an endless loop
Node ID 00001367 has not been included in the hierarchy
Can any one help me out to solve this issue?
Best Regards,
Venkata.

hi,
refer to this thread.
No hierarchy displaying in the Maintain Hierarchies

Loading the hierarchy of GL account

Similar Messages

Maybe you are looking for