Loading the plan data

Hello All,
Iam using multiprovider which consists of Real time infocube and i have created aggregatelevel and planning function then executed the planning sequence but when i checked infcube there is no planned data .please help me by giving series of steps.
Thanks

Hi Priya,
Check the link below.
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Regards,
Sudeepti

Similar Messages

How can i check the planned data vs actual data

How can i check the planned data vs actual data with the infocubes?

Hi Srinivas,
You create one cube for plan data and create another cube for actual data.
Create a multiprovider and give comparision report. this is betterway.
Or you can also load actual and plan data in one cube but you need to maintain one character like version to seperate atual and plan data.This is not a good work.
Regards,
Vijay.

Unable to load sample planning data through EAS

Hi
I am using planning 9.3.1 version. I installed Planning ,EAS, previously I loaded the sample data a lot of times , right now I installed Provider services now I am getting error in loading the data through EAS when I am loading the data I am unable to select the error file but I can select the load file . Even when I am hitting the online help it is not opening too.Previously before installing APS I am able to load. Does any one face this issue.....
Thanks

Hi
I am using planning 9.3.1 version. I installed Planning ,EAS, previously I loaded the sample data a lot of times , right now I installed Provider services now I am getting error in loading the data through EAS when I am loading the data I am unable to select the error file but I can select the load file . Even when I am hitting the online help it is not opening too.Previously before installing APS I am able to load. Does any one face this issue.....
Thanks

Load maintenance plan data

Hi,
I have a file to load maintenance plan data(IP01).I used the standard program riibip00.
But only those maintenance plan categories for which the call object is initial are supported.(Mentioned in documentation of riibip00)
I have them not initial.
How do I proceed, other than Recording?

Hi Maruthi,
At my place though we have done the same using a BDC, but uploading a maintenance plan is quite possible via LSMW using"Direct Input Methord", IBIP Structure.
Object is 0460
methord is 0001.
you can even create a strategy plan using the same Program IBIP.
hope it will help you.
Regards,
Yawar Khan

Data Refresh Error: We cannot locate a server to load the workbook Data Model.

Hello,
Recently I have developed a PowerBI Report using Excel Workbook with external data source. It refreshes successfully for some days and then starts throwing error on every scheduled refresh as "We cannot locate a server to load the workbook Data
Model."
The workaround solution is to restart the application server which has SQL Server Power Pivot Services Installed which will again work for some more days and again start throwing error.
So, I am looking for permanent fix for it.
Following are additional details about our SP Farm:
No. of front end servers: 2, Application servers:2, DB servers 2 with windows fail over cluster.
PowerPivot Server is installed and configured from App 2 server.
Error Log from event viewer:
Unable to load custom data source provider type: Microsoft.PerformancePoint.Scorecards.DataSourceProviders.AdomdDataSourceProvider, Microsoft.PerformancePoint.Scorecards.DataSourceProviders.Standard, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.Type.GetType(String typeName, Boolean throwOnError)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.InitializeCustomDataSourceProviders()
PerformancePoint Services error code 10107.
Thanks,
Ibrahim

Hi ibrahim,
Please try to do the following steps:
1. Install "1033\x64\SQLSERVER2008_ASADOMD10.msi" from
http://www.microsoft.com/en-us/download/details.aspx?id=26728
2. In the Application Management section of the Central Administration home page, click Manage service applications.
On the Manage Service Applications page, click the Excel Services service application that you want to configure.
On the Manage Excel Services page, click Data Model.Click Add Server.
In the Server Name box, type the name of the Analysis Services instance that you want to add.
3. Check the thread below:
https://social.technet.microsoft.com/Forums/en-US/ecc18319-88d8-4dd0-bafd-fa0d2edceffb/external-data-refresh-failed-we-cannot-locate-a-server-to-load-the-workbook-data-model?forum=sharepointadmin
More information:
https://timpanariuovidiu.wordpress.com/2013/02/14/71/
https://support.microsoft.com/kb/2769345?wa=wsignin1.0
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

PowerPivot Data Refresh Fails - We cannot locate a server to load the workbook Data Model

Hello,
I have installed sql01\PowerPivot instance of Analysis services on my existing SQL Server and configured it per Configure Power Pivot for SharePoint 2013
http://technet.microsoft.com/en-us/library/dn456880(v=office.15).aspx . I did not install a second Database Engine on the server.
I created an Excel 2013 workbook using the Excel 2013 PowerPivot add-in and saved it to my SharePoint BI Center Document library.
When I try to refresh my workbook, I get 2 errors in the SharePoint log.
http://support.microsoft.com/kb/2756665?wa=wsignin1.0 indicates the sproc is deprecated, but that does not help me fix the issue.
Log errors:
Following error occured while trying to execute a sql query: System.Data.SqlClient.SqlException (0x80131904):
Could not find stored procedure 'DataRefresh.GetSchedule'.
EXCEPTION: NoAvailableStreamingServerException: We cannot locate a server to load the workbook Data Model.
macrel

Hi Marcel,
Based on my research, it seems that you have Microsoft SQL Server 2012 PowerPivot for SharePoint 2013 add-in installed on a computer. When you perform a data refresh operation on some PowerPivot workbooks in Microsoft SharePoint 2013, you receive two error
message.
As to the first error, this issue occurs because the Custom Properties on the Excel workbook are not correctly cleared before you set a new serialized schedule. This causes an extra custom property to remain after you set the new schedule. Therefore, the
new schedule fails. To fix this issue, please
install Cumulative Update 9 for SQL Server 2012 SP1.
As to the second error, please
running a repair using PowerPivot configuration wizard for SharePoint 2013. For more information about Troubleshooting PowerPivot Data Refresh, please see:
http://social.technet.microsoft.com/wiki/contents/articles/troubleshooting-powerpivot-data-refresh.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

XEM - Unable to load the initial data or the variances(delta) data into sys

I am installing xEM 2.0 SP 10 (SAP xApp Emissions Management) in a windows environment with SQL 5000. I installed xEM on NW 2004, usage types AS Java and EP 6.
I am attempting to load the initial data or the variances (delta) data into the system. Instruction is on page 15 in the install guide.
I am supposed to enter the following in the command line:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=[JDBC Driver];[JDBCUrl];[User];[Password]
Example command for import into SQL Server:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password
The customer I am with is running the xEM database on a different instance. This is where I run into a problem. I am not sure how to specify the instance in the script. This is what I have attempted so far:
C:\>cd temp\load
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43;SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establishing socket. Connec
tion refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establi
shing socket. Connection refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection ref
used: connect
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534;SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user
'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Lo
gin failed for user 'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534:SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>
My last attempt was a command using colons and semicolons with the following results. The closest (there was a significant delay before the error or failure) appears to have been //PRODSQL43;SQL3:1534; (second attempt). The error listed from this attempt is   "Error establishing socket. Connection refused: connect".
I also checked the default database that user SAPPEMDB has in place and it is assign the correct database.
Please help.
Message was edited by: Owner
        Mike Smayrabunya

Hey,
It looks like one of the following:
1. The DB is down,
2. The user SAPPEMDB does not have the right authorization.
3. The password of the user SAPPEMDB is not password
4. The syntax is incorrect
in order to find what is the problem,
please:
1. Login in the the DB PRODSQL43:1534 with the user "SAPPEMDB" and the password "password",
this will eliminate the options 1 - DB down, 2 -SAPPEMDB does not have authorization and 3 - password of the user SAPPEMDB is not password.
2. If the login failed, than please run sql trace with security elements (in the client there is a tool called "SQL Profiler"
3. If the login is correct, than you check the syntax of the command:
"java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password"
According to the error message "Error establishing socket. Connection refused"
it looks like The DB is down or syntax is incorrect.

External Data Refresh Failed. We cannot locate a server to load the workbook Data Model. ThisWorkBookDataModel

Hi All,
I have been trying to fix this for days now. I have tried solutions in many articles but to no avail. So while the error message is something you may have seen may times, I just can't find a solution in my case.
This is the error:
And in text just in case the image isn't viewable:
"External Data Refresh Failed. We cannot locate a server to load the workbook Data Model. We were unable to refresh one or more data connections in this workbook. The following connections failed to refresh: ThisWorkBookDataModel."
What is worse is I have checked the ULS (SharePoint Trace Logs), the Event Viewer Logs and the OWA Logs and I cannot find a specific error that would help pin point the problem.
Excel Workbook
So what am I doing? I have an Excel 2013 workbook and I create an "SQL Server" connection to the AdventureWorksDW database, add a pivot table and a pivot chart, test in in Excel and all works fine.
I save the Excel workbook to SharePoint 2013 and then select "Data" then "Refresh All Connections" and then I get the error in the picture above.
Even more puzzling is I have another Excel workbook that also has pivot tables and pivot charts in the AdventureWorksDW2012Multidimensional cube database in "SQL Analysis Services" and this works fine. Hmmm.
My Environment
My environment is Windows 2008 R2 Server, SharePoint 2013 with the April Service Pack1 and a separate server with OWA2013 SP1. It has an SQL Server 2008 R2 database which has been upgraded to SQL Server 2012.
Data Model Settings
In Excel Services this is set to my server name which is "server-name". As I do not have instances all I can enter is the server name. As this works everywhere else including the workbook outside of SharePoint I do not think this is the problem.
But I could be wrong.
Unattended Account
I have set this up for the PowerPivot Services App and Excel Services App.
ODC Connections in Excel
I have tried all 3 authentication modes, Windows, Secure Store ID and "None" which is the unattended account. I have not tried the other connection types, should I?
Not in WOPI
I am not in WOPI mode.
AD Accounts
I have added permissions in the SharePoint Services and SQL Server, and as they work in Excel outside of SharePoint, I do not think it is a permissions issue. I could be wrong of course, but the problem is in one of SharePoint, OWA, AD,
SQL Server, Excel, and Windows Server.
Isolate the Error
Below is a list of errors I think are relevant but they do not tell me much. The SharePoint logs are not really giving me an error that tells me what to do and where to do it, or even why it cannot refresh, (perhaps not noticeable by the untrained eye).
Problem with SQL Server Not Analysis Services
So my cube database in analysis services works fine in SharePoint/OWA but not the databases in sql server. This is my best clue but I have no idea what it means. Why would it work with an Analysis Services connection but not an "SQL Server" connection?
It Works Outside of SharePoint
If I run the excel worksheet outside of SharePoint all works fine. When inside OWA this is where the refresh error occurs.
Errors from Event Viewer on SharePoint Server using ULS Viewer
"Failed to create an external connection or execute a query. Provider message: There are no servers available or actively being initialized., ConnectionName: , Workbook:"
"Refresh failed for 'ThisWorkbookDataModel' in the workbook 'http://server...'. [Session: 1.V22.26itT0lx8piNFeqtuGVhN214.5.en-US5.en-US36.98c0e158-9113-46e9-850e-edda81d9ed1c1.A1.N User: 0#.w|ad\testuser1]"
And an error in the ULS under the "Data Model" category:
"--> Check Deployment Mode (server-name): Fail (Expected: SharePoint, Actual: Multidimensional)."
This last error, as it turned out, defined the problem concisely, although I was yet to work out what it meant in some detail.

I finally solved this myself (or should I say with the help of several key articles).
The refresh did not work because the database was not in "SharePoint Mode". Yes, SQL Server has modes, 3 of them in fact.
If you installed SharePoint to the default SQL instance which would be called <servername> then you cannot use this default instance for Excel 2013 workbooks in OWA 2013 because the refresh only works if the database is in SharePoint mode.
So what are these 3 modes? The Deployment Mode property in the msmdsrv.ini file has them as:
0 = Multidimensional mode (the default whenever you install SQL Server normally)
1 = PowerPivot for SharePoint mode
2 = Tabular mode mode
How do you know what mode you are in? That's easy, open SQL Studio Manager and connect to all your SQL database engine instances (ignore Analysis Services or SSRS as they are not database engines). If you only have the default instance then that is almost
definately in Multidimensional mode which is the default and what SharePoint installs its databases to.
You must have an instance called <servername>\POWERPIVOT. This instance is the "sharepoint mode" needed, and the default instance name when you install an SQL instance in this mode.
If you don't see <servername>\POWERPIVOT in SQL server then you are not in "sharepoint mode". It is more accurate to say, you do not have an instance that is in sharepoint mode. This is because you cannot simply switch modes on an SQL server.
You have to install a new instance in the required mode, thats the only way.
That's easy enough. Load up the SQL Server setup CD and run setup. Install a brand new instance and select "SQL Server PowerPivot for SharePoint" when you get there in the wizard.
Now you will have the default instance that stores all the SharePoint databases and that is in mode 0, and a new instance called <servername>\POWERPIVOT that is in mode 1. The "<servername>\POWERPIVOT" instance connection is what you
will use for Excel 2013 when rendering in OWA 2013.
You also need to ensure OWA 2013 is not in WOPI mode for Excel worksheets. See the last link below for more information about WOPI.
Next you should go to the Excel Service App in CA and click Data Model Settings and add the <servername>\POWERPIVOT instance.
Then you have to either turn off the firewall on the SQL server machine, or create an inbound rule on the Windows firewall to open the TCP port for the <servername>\POWERPIVOT instance:
1. Start Task Manager and then click Services to get the PID of the MSOLAP$InstanceName.
2. Run netstat –ao –p TCP from the command line to view the TCP port information for that PID.
Finally, you can now create Excel 2013 workbooks that run in OWA without refresh errors, as long as you are connecting to the <servername>\POWERPIVOT instance. Hooray.
REFERENCES
Look for the string "There are no servers available or actively being initialized" in this article:
http://blogs.msdn.com/b/analysisservices/archive/2012/08/02/verifying-the-excel-services-configuration-for-powerpivot-in-sharepoint-2013.aspx
Determine the server mode:
http://msdn.microsoft.com/en-au/library/gg471594(v=sql.110).aspx
Install the SharePoint PowerPivot instance (aka SharePoint mode)
http://msdn.microsoft.com/en-au/library/eec38696-5e26-46fa-bc83-aa776f470ce8(v=sql.110)
Open the port for the new SQL instance:
http://msdn.microsoft.com/en-us/library/ms174937(v=sql.110).aspx
Turn Off WOPI for Excel OWA
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/01/31/powerpivot-for-sharepoint-browser-refresh-fails-data-refresh-not-supported-in-office-web-apps.aspx

Error While Loading the Master Data from R3

Hi Gurus,
I am loading the masterdata from R3.I have enhanced the Datasource .In that datasource there is a field DATUB ( Valid To Date).For this field I have wriiten the User Exit at the R3 side.Now I am loading the data in BW.But I am not getting the values for DATUB field in the BW, though they are there at the R3 side.
I have done following to analyse the issue.
1.Have checked the datasource at the R3 from RSA3.Its populating the field DATUB correctly.
2.Have deleted the whole masterdata and tried to load again.But no success.
3.Have tried to load the data for the perticular Bill of Material(BOM).Then it get loaded correctly along with the value of DATUB.But when i tried loading the entire data i am not getting the field DATUB populated.
Please help me out.Its urgent.
Thanks.
Shalaka

Hello,
I finally got the solution to my problem.
If you append a field to generic datsource then you should check the tick in datasource for "field only". Or else you would not get the values handed over to BW.
Please check following link for more details about this "field only" setting for Generic datasources.
http://help.sap.com/saphelp_tm70/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
Regards,
Anuj

Error when loading the master data

Hi all,
Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
Thanks in advance.
Regards,
Shaik.

Hi,
Please go through the following threads:
PERFORM_CONFLICT_TAB_TYPE shortdump during data loading into ODS
Perform_conflict_tab_type error
PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
Next time you might want to just search the forum first... lots of surprises!
Hope this helps,
Cheers,
Gimmo

'Overlapping Time Intervals' error while loading the Master Data

Guys,
          Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM         Valid To                  Valid From                 Edition
1001             12/31/9999             04/01/2010                2010.1.1
1001             01/31/2010             03/01/2010                2010.1.2
1001             12/31/9999             02/01/2010                2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.

FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash

Error while loading the master data into hierarchy

Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
Prateek

Hello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep

Error while loading the master data

Hi Masters,
When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Could you please help me...
Thanks & Regards
Raja.S

Hi,
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
Resolutions:
Reload the Master Data manually again from Info-package at RSA1.

Want to move the planning data to HFM

Any recommendations to move the Planning data to HFM.
Thanks in Advance....
Prasanna..

Turn on keyboard navigation in the Keyboard shortcuts of Keyboard and Mouse prefs and you can use the keyboard to navigate through the menus, folders, etc. However, there is no way to drag.
Set full keyboard access to "All Controls" and you can tab through all the buttons in the dialog boxes. Use spacebar to "click" the selected button.
In the Finder, Cmd+down arrow opens a file/folder. Cmd+Up arrow goes up in the hierarchy.
Combine this with the previous tip and you can have it all, mostly.
Also, without any of that, esc or cmd+. cancels, and cmd+first letter of button usually selects the button. That last one is application specific.

Performance problem in loading the Mater data attributes 0Equipment_attr

Hi Experts,
We have a Performance problem in loading the Mater data attributes 0Equipment_attr.It is running with psuedo delta(full update) the same infopakage runs with diffrent selections.The problme we are facing is the load is running 2 to 4 hrs in the US morning times and when coming to US night times it is loading for 12-22 hrs and gettin sucessfulluy finished. Even it pulls (less records which are ok )
when i checked the R/3 side job log(SM37) the job is running late too. it shows the first and second i- docs coming in less time and the next 3and 4 i- docs comes after 5-7 hrs gap to BW and saving in to PSA and then going to info object.
we have userexits for the data source and abap routines but thay are running fine in less time and the code is not much complex too.
can you please explain and suggest the steps in r/3 side and bw side. how can i can fix this peformance issue
Thanks,
dp

Hi,
check this link for data load performance. Under "Extraction Performance" you will find many useful hints.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b
Regards
Andreas

Loading the plan data

Similar Messages

Maybe you are looking for