Loading three consecutive external bitmap images

Hi,
My question is very simple. I just want to know that when loading three consecutive images in a row (via LOADER() and URLREQUEST()), if I only need to watch for the completion of the last image load. Or, will all three files load simultaneously (the smallest file completing first)?
Also, is the following relatative URL acceptable?
"../../Usifb/Images/Photos/Animations/WheelFreeTractor.png"
Regards,
Ron

There is no telling what order the files will be loaded unless you control the order by loading them sequencially. To load them sequencially you need to have a listener for each one.

Similar Messages

How to load and save a Bitmap Image?

Hi, I have to load a directory of bitmap images, take the background(in this case: light green) and then swap those exact pixels with another image's corresponding pixels, and then save them in the same format(bitmap) in a different directory. Can anybody advise me on which libraries I need to use, and how I should approach this? I need help with every step so any help will be good. Thanks. Basically I need to do the following:
1. Load 2 directories of images(Lets say the images are corresponding like Image1A and Image1B)
2. Take Image1A's green pixels and swap them with the corresponding Image1B's pixels.
3. Save Image1A in a new Directory.
This will go on for however many images there are in those 2 directories. Can anybody advise me how to do this? I need critical help in all three stages. Thanks.
Edited by: Taufiq on Feb 25, 2008 9:10 AM

Taufiq wrote:
Doesn't java handle bitmap images? Does it HAVE to be gif etc. ?
Edited by: Taufiq on Feb 25, 2008 10:17 AMI'm not familiar with windows-specific stuff, but ImageIO supports additional image readers/writers. You should google.
Edit: Actually, I just checked and ImageIO comes with readers and writers for both BMP and WBMP files:
http://java.sun.com/javase/6/docs/api/javax/imageio/package-summary.html

Loading multiple consecutive .swf files in Flash 8

I have a question and hope that someone may be able to help;
this might be a piece of cake for you...
I have a container .fla movie and would like to load
consecutive external .swf files. Right now I have a play button
triggering the loading of the next movie, but what I would REALLY
like is a smooth transition from .swf to .swf using a listener so
that the next .swf will load once the previous one has finished. I
have a counter which determines the next .swf in order.
So far, my code is this:
Counter:
stop();
//SETUP OUR COUNTER
var mcCounter:Number = 0;
//THIS BLOCK IS ONLY TO HANDLE THE LOADER AND THE FIRST
MOVIE, movie0.swf
var myMCL:MovieClipLoader = new MovieClipLoader();
var loadListener
bject = new Object();
myMCL.addListener(loadListener);
myMCL.loadClip("movie" + mcCounter + ".swf", 6);
loadListener.onLoadComplete = function():Void {
_level0.play();
//-------------------------<CLIP
LOADERS>------------------------------\\
function loadNextClip():Void {
if(mcCounter < 6) {
mcCounter++;
var nextMCL:MovieClipLoader = new MovieClipLoader();
nextMCL.addListener(this);
nextMCL.loadClip("movie" + mcCounter + ".swf",6);
//LOADS PREVIOUS CLIP , WON"T GO PAST ZERO
function loadPrevClip():Void {
if(mcCounter > 0) {
mcCounter--;
var prevMCL:MovieClipLoader = new MovieClipLoader();
prevMCL.addListener(this);
prevMCL.loadClip("movie" + mcCounter + ".swf",6);
//-------------------------</CLIP
LOADERS>------------------------------\\
Any suggestions? I appreciate ANY help you can offer. I have
been unsuccessfully looking for hours online, and can't find any
examples, although it doesn't seem as if it should be the hardest
thing in the world.
Thanks!

You need a monitor to know when one movie clip has completed
play. A simple
monitor could be adding onEnterFrame handler to the
container_mc when
MovieClipLoader onComplete or onInit is fired. In that
handler a test to see
when the loaded clip's _currentframe == the loaded clip"s
_totaframes.
Ex:
this.createEmptyMovieClip("container_mc",
this.getNextHighestDepth());
container_mc._x = 0;
container_mc._y = 0;
var swfNumber:Number = 0;
var swfNumberMax:Number = 25;
var swfNamePrefix = "MovieClipLoaderDetectEndOfPlay_Movie";
var mclListener
bject = new Object();
mclListener.onLoadStart = function(target_mc:MovieClip)
target_mc.startTimer = getTimer();
mclListener.onLoadComplete = function(target_mc:MovieClip)
target_mc.completeTimer = getTimer();
mclListener.onLoadInit = function(target_mc:MovieClip)
var timerMS:Number = target_mc.completeTimer -
target_mc.startTimer;
target_mc.play();
target_mc.onEnterFrame = function()
trace(this._currentframe)
if (this._currentframe == this._totalframes)
trace("Load Next Swf")
loadNextSwf()
var container_mcl:MovieClipLoader = new MovieClipLoader();
container_mcl.addListener(mclListener);
function loadNextSwf()
swfNumber++;
if (swfNumber <= swfNumberMax)
var swfSuffix = ((swfNumber<10)?"0" :"") + swfNumber;
container_mcl.loadClip(swfNamePrefix + swfSuffix + ".swf",
container_mc);
loadNextSwf()
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"dragonlilly" <[email protected]> wrote in
message
news:[email protected]...
I have a question and hope that someone may be able to help;
this might be
a
piece of cake for you...
I have a container .fla movie and would like to load
consecutive external
.swf
files. Right now I have a play button triggering the loading
of the next
movie, but what I would REALLY like is a smooth transition
from .swf to .swf
using a listener so that the next .swf will load once the
previous one has
finished. I have a counter which determines the next .swf in
order.
So far, my code is this:
Counter:
stop();
//SETUP OUR COUNTER
var mcCounter:Number = 0;
//THIS BLOCK IS ONLY TO HANDLE THE LOADER AND THE FIRST
MOVIE, movie0.swf
var myMCL:MovieClipLoader = new MovieClipLoader();
var loadListener
bject = new Object();
myMCL.addListener(loadListener);
myMCL.loadClip("movie" + mcCounter + ".swf", 6);
loadListener.onLoadComplete = function():Void {
_level0.play();
//-------------------------<CLIP
LOADERS>------------------------------\\
function loadNextClip():Void {
if(mcCounter < 6) {
mcCounter++;
var nextMCL:MovieClipLoader = new MovieClipLoader();
nextMCL.addListener(this);
nextMCL.loadClip("movie" + mcCounter + ".swf",6);
//LOADS PREVIOUS CLIP , WON"T GO PAST ZERO
function loadPrevClip():Void {
if(mcCounter > 0) {
mcCounter--;
var prevMCL:MovieClipLoader = new MovieClipLoader();
prevMCL.addListener(this);
prevMCL.loadClip("movie" + mcCounter + ".swf",6);
//-------------------------</CLIP
LOADERS>------------------------------\\
Any suggestions? I appreciate ANY help you can offer. I have
been
unsuccessfully looking for hours online, and can't find any
examples,
although
it doesn't seem as if it should be the hardest thing in the
world.
Thanks!

Could work an animated flash bitmap image exported in html 5, in DPS ?

I'm new in DPS, just started for a couple of weeks and I need to use a image in an animation.
I created the animation in inDesign exported in .fla, used de toolkit js, load it in a container with web content overlay, and when I preview it with Adobe Content Viewer it doesn't work, it apears a blank screen. Neighter of animation from that stage won't work.
To be very precise any animation works fine, when I test the html in a browser, the problem appears only in the content viewer.
The animation is very simple: smal logo entering in the stage from the right, not very complex.
I tried in flash with other images in a test file and loaded in inDesign, and still don't work. Other vector animation works well, no problem. I saw that if I have an image in library in flash and export a simple animation with a vector ball, won't work in indesign preview, with content viewer.
My question is, Could work an animated flash bitmap image exported in html 5, in DPS ? If so, what should I need to do ?
Thank you in advance.

Two possible solutions I was considering:
1) In my index/first page, have all the swfs present (scaled to 1x1, behind something, or invisible) and have a preloader code on that first page... so all the content gets loaded before continuing onto the rest of the site. That would certainly work in making the site run quick... but would mean a relatively lengthy wait at the start. Luckily, unlike my current site, all the actual site content (aside from the header/nav interface) is HTML... so the bulk of the site's content is in the HTML pages, not as part of the Flash header... so it probably wouldn't be too horrific a wait. However, it would be loading EIGHT of these swfs, since there are eight pages... so then maybe it would be....
2) Have an swf that consists of just the 'draw up' of the interface, and it's idle state... then when each button is pressed, load a new swf to replace the main one, which has the specific page's animated title sequence, and ends with the code to load the html page. So, each separate HTML page would have embedded into it only the main swf, and the title animation swf would be swapped in when a nav button is pressed. Main issue here is each button press would envoke a preloader sequence (kind of tedious)... and unfortunately all the 'main interface' elements loaded in with the main swf would have to be loaded in again at the start of each animated title swf (although none of the draw up... just the loading of the interface and buttons). For highspeed users, it should be okay, I guess....
Thoughts or better ideas?

Independent X and Y scaling of a bitmap image

I would like to change the size of a bitmap image in the x and y directions independently. Essentially I am loading in an image, calculating the size of the image on the screen (inches) and then comparing that to the actual real world part size. Following this I decide whether the screen image is bigger or smaller than the real part and would like to scale the screen image to match the real size of the part. The problem is that the scaling factors are not equal in the X and Y directions. Can I scale the image independently in both directions using the Zoom property node of a picture function?? If not how else could I accomplish this?? I am using LabView 8.0. Thanks!!
Kirk

Try Image Toolbox ($)
George Zou
http://webspace.webring.com/people/og/gtoolbox

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff .... WILL THIS FIREFOX ERROR SOON BE FIXED ?
Don't know what more to ask. I looked at the known problems and couldn't make any sense of the answers

Upgrade your browser to Firefox 8 and check
* getfirefox.com

External/Remote Images no longer appear in Design View!

Hi,
First post here.
Suddenly external/remote images in Dreamweaver CS3 no longer appear when viewed in Design View.
All I get now is grey boxes!
I have tried toggling 'Display External Files' on and off, made sure Cache is off (tried it with on too) and nothing seems to make a difference.
If anyone could help please, it's so annoying
Thanks,
James

Windows XP.
I'm an experienced web designer, 10+ years so you will have to trust me my code is fine.
It just shows the grey boxes in place of where the images should be.

How do i insert a splash screen or a loading screen and a application image for a phone app on Dream

How do i insert a splash screen or a loading screen and a application image for a phone app on Dreamweaver 6, 5.5 had the mobile application setting that is seemingly no longer present? and i also heard you can use animanted backgrounds on the mobile application in dreamweaver 6 but figuring out how to set the splash screen and application image like it was in 5.5 would be nice. All i can get to pull up is the web application i developed i am trying to build into a phone app on google chrome, if i could officially designate it as a phone app where i can set each splash screen and app image to where it is recognized as a phone app that would be really nice.

Duely noted, the server will still not connect, so i have left an inquery in the suggested forum.
Date: Mon, 15 Oct 2012 07:37:34 -0600
From: [email protected]
To: [email protected]
Subject: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    Re: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    created by David_Powers in Developing server-side applications in Dreamweaver - View the full discussion
jmed0411 wrote: the phonegap program loads for quite some time and eventually reaches to the unfortunate conclusion that the server cannot be reached and to please try again. Any ideas on how that problem can be mended if the solution is in my hands?? I haven't used PhoneGap Build recently, but I have seen several reports about problems connecting to the server. One suggestion that I've heard is that there has been unexpectedly high demand on the server since the launch of Edge Tools and Services as part of the Creative Cloud last month. As far as I know, the only thing you can do is wait, and try again later. You could also try posting in the PhoneGap Build forum: http://community.phonegap.com/nitobi/products/nitobi_phonegap_build.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4774799#4774799
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4774799#4774799
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4774799#4774799. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Developing server-side applications in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

CS3 - Design View not showing externally linked images

In CS3 Design View, externally linked images are not showing
up... i am only getting the place holder.
To prempt some questions:
1/ Links are correct and complete - apart from the fact that
they show up when previewing in the browser(s) - i have
crosschecked
2/ There are no spaces in the url
3/ In the 'View' menu, 'Display External Files' is checked
I had this problem before and escargo suggested saving and
rebooting. It worked then but strangely, today, that file is again
showing some of the externally linked images but not all. And on a
new file, created today, none of the externally linked images are
showing up... :(
I'm sure there's a simple solution to the problem... anyone
have any idea what it could be?
Thanks and cheers,
JJ

Nope. Some show - some don't.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jhabrix" <[email protected]> wrote in
message
news:faom5n$9ku$[email protected]..
> Bump....
>
> Anyone have a solution to the above problem???

Using a script to get the color of a colorized Black & White Bitmap image

I've been running into this wall for quite some time and would greatly appreciate any help that can given for it.
I have an Illustrator script that runs inside of a BridgeTalk session within an InDesign script. Yeah, it's complicated. The upshot is that the Illustrator part opens up an EPS file, looks through all objects on a certain layer in that file, and returns an array of the colors used in it. So, it looks at fill colors, stroke colors, gradient stops, etc. One of the biggest stumbling blocks (next to PlugIn Items, which I'll ask about in a separate post) is getting the color of raster images.
Most raster images, I realize, are going to be CMYK or RGB images, but our company mostly deals with either Grayscale images or Black & White Bitmaps that are embedded in the EPS file. Those two allow the ability to colorize them by simply selecting them and then choosing a color, such as a spot PANTONE color from one of their color books.
Now, I need the script to read the color that the raster image has been colorized with. This works okay for images that have a GrayScale color space, as the script just looks at Colorant[0] of that image. However, I run into a problem with Black & White Bitmap images. Here's a piece of code that I try to make work with an EPS file that has a raster image:
var document = app.activeDocument;
for (var i = 0; i < document.layers[0].pageItems.length; i++) {
          // Stepping through each item on the layer.
          var currentItem = document.layers[0].pageItems[i];
          $.writeln("Current item is " + currentItem.typename);
          $.writeln("Number of channels is " + currentItem.channels);
          $.writeln("Color Space is " + currentItem.imageColorSpace);
          $.writeln("Colorized Grayscale? " + currentItem.colorizedGrayscale);
          $.writeln("Number of Colorants: " + currentItem.colorants.length);
          for (var j = 0; j < currentItem.colorants.length; j++)
                    $.writeln("Colorant number " + j + " is " + currentItem.colorants[j]);
          $.writeln("Its parent is " + currentItem.parent);
          $.writeln("Parent's typename is " + currentItem.parent.typename);
This code runs successfully on an Illustrator file that has a Black & White Bitmap image on the top layer, but if you try and run it, you'll see the problem: Even if you've colorized your Bitmap image with a PANTONE spot color (and the script even returns "true" on the line "Colorized Grayscale?"), Colorant number 0 is "Gray". It should be the spot color assigned, not "Gray".
Can anyone please help me figure out how to get the script to recognize the actual colorant of a Black & White Bitmap image in Illustrator?

If you're a professional photographer with 50,000 pictures stored now and more coming all the time, you need to forget about using iPhoto and get yourself some professional-quality digital asset management software. iPhoto is not meant for people like you, and instead of providing a simple, elegant one-stop answer to all your needs, iPhoto is actually complicating your life.
You need an application that will:
- catalog ALL your images and keep track of where they are, no matter how many DVDs, folders, partitions or hard drives they're spread over;
- display thumbnails of ALL of them, even when the DVD that contains them is not present in any drive, so you can select all the ones you want for a project;
- find and copy (or export) the originals of all the files you've selected in the browser window, even if it means prompting you to insert the necessary DVDs for all of them.
I suggest Googling "digital asset management software Macintosh" and seeing what turns up. I used to use an old version of Extensis Portfolio, and even that would have been better for your purposes than iPhoto is.

Bitmap images have grayscale settings

I'm creating pdfs using Acrobat Standard 6.0 from Word documents. The documents contain images in color, grayscale and bitmap mode. For some reason the bitmap images in the final pdfs are not appearing as bitmaps but appear with the settings for the grayscale images. Meanwhile, the actual grayscale images appear with the color settings. The color images are fine. I've experimented with different resolutions for each type of image and each time the results follow the pattern described.
I'd be interested to know where in the chain of events is the problem is occurring, or if anyone can suggest a way of trying to pin it down. I've tried two separate versions of Word, so I'm assuming the problem lies elsewhere.
Thanks for any advice.

Is there a way really one can use to convert bitmap
images into vectored images?
I ask this question in response to a problem that I
have. I take photos using a camera of resolution 72
pixels per inch and then process them in a program I
have written in Java. I then print cards as the
output of the system processing. The picture quality
I then produce is a worry. The images are blurred and
they rather look like zoomed bitmap images. Its not
very disgusting but its something the clients are
complaining about. And what makes you think that vectorizing an image is actually an improvement?
Suggestions with regards to where I could be going
wrong are very much welcome.Get a better camera.

Problem with warp tool and bitmap images

While you apply warp tool to a bitmap image, the image becoming corrupted on each touch. Please check screen shot...

OK. I start to understand what you're doing there.
It's simply that Illustrator is not a bitmap editor. It's not optimized for editing this kind of artwork.
What you can do is apply an envelope and then use the warp tool on the envelope.
Also: edit the envelope options. You can get higher image quality with that.

How to convert color of bitmap image?

I am programming with Acrobat 7.
I'd like to change color of all object to CMYK color or gray.
In case of plain object like path or font,
I need to seek CMYK color from the object's RGB color.
and I change the property of the object color space and value with it.
but in case of bitmap image, i don't know how to at all.
it has numerous colors.
I hope your advice.

Thank you both of you.
by the way, Leonard, Could you tell me that APIs more detailly?
I have look into the document for long time. it is still hard to find proper API.
I have to say this again. I am trying to find APIs based on version 7.
I am using custom function ACEconvertColorProfile which is placed in snippetrunner. it consists of these APIS ACMakeColorTransform, ACApplyTransform, and so on.
but I can't find the way to convert bitmaps once and for all.
I hope you give more hint.
Thanks again.

Trying to add album from iphoto into idvd slideshow. Not all photos are loading. Message "creating thumbnail images...(31 remaining). Been there a long time. What is wrong?

trying to add album from iphoto into idvd slideshow. Not all photos are loading. Message "creating thumbnail images...(31 remaining). Been there a long time. What is wrong?

Open your iPhoto Library, go to that particular album and verify that you can view the full sized version of each image by double clicking on them. Report back with the results.
OT

Query: How does scale9grid work with bitmap images?

I have a custom component I use as website header built in flash catalyst. Below is the code for the component.
<?xml version="1.0" encoding="utf-8"?>
<s:Group xmlns:s="library://ns.adobe.com/flex/spark" xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:d="http://ns.adobe.com/fxg/2008/dt">
<s:BitmapImage smooth="true" source="@Embed('/assets/images/TIBB/Header.png')" d:userLabel="Header" width="100%" />
</s:Group>
The problem is that it doesn't scale according to 9 slice scaling. How do I use scale9grid for the bitmap image?

http://www.roseindia.net/tutorial/flex/flex4/components/9slicescaling.html

Loading three consecutive external bitmap images

Similar Messages

Maybe you are looking for