Loading to Inventory Management Snapshot ODS and Cube

I am trying to develop an Inventory data model and have already created and loaded to the Inventory Management (0IC_C03) cube.
I have now created a Snap Shot ODS and Snap Shot cube, is there a way that I can load to these objects without having to do a re-init? Thanks

Hello Niten,
There is no need to do re-init, you can load the data into non-cumulative and snapshot targets in parallel. Through sam infopackage with which you are loading to 0IC_C03, load to snapshot targets also.
Regards,
Praveen

Similar Messages

Inventory Management SnapShot ODS

What is the purpose of the SnapShot ODS, in the sense that why can I not just load directly to the SnapShot cube, my understanding is that if I look at the logic for say the total quantity and value key figures in the update rules to the cube this should be able to give me an upto date scenario or am I mistaken? Thanks

Hi Niten,
I am not sure if you are referring to any standard content ODS. But, generally speaking about snapshot scenarios, the advantages of introducing an ODS layer are:
- Overwrite feature
- you can keep data at a very granular level in ODS and create different cubes for different reporting scenarios or aggregation levels.
- additional flexibilty in loading data to cubes due to the introduction ODS.
Hope this helps. If you are looking at any specific case, do write back with details.

Inventory Management: Snapshot ODS 2LIS_03_UM

In the How to guide the Update rule from 2LIS_03_UM for the Key Figure refers to:
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
Is there only an error in the comment (duplicated) or is it that we only need one of the statements? Thanks

hi Niten,
returncode = 0 will update, returncode = 4 not update,
seems duplicated, comment will impact nothing to the program/routine.
hope this helps.

OFI_AP_4 Delete all data and REINIT the load to FIAP ODS and Cube

Hi bw GURUS I need a quick help, I have requirement to Delete all data and REINIT the load to FIAP ODS and Cube i have data source ofi_ap_4, please tell me what should i do as i know LO extraction but whats is the transaction code to run the set job for FIAP like for Purchasing I have OLI3BW now tell me what will be the steps to reinit the load to fiap ods and cube.
i know this much as below
Delete the data from cube and ODS
Delete the Init in Cube AND ods NOW reinit i mean load the init, but now problem is before doing that i need to run the set up job or tell me what are the steps please
its very important since i am doing in production
thanks
Soniya

You are right by your approach to update from PSA to ODS as u have wrritten before. Just got to PSA tree select the PSA request and choose update Immediatly or scedule for update.
(and if u have 0FI_GL_4 but u r not using it ..it is fine. I was telling that in case u have that and you are trying to use somethin with 0FI_AP_4)

Inventory Management SnapShot model

In the How to guide it discusses on how to create a SNAPSHOT model for monthly loads.
Can I create a SNAPSHOT ODS and eliminate the Cube as part of my Data Flow and if so I believe the only change that I need to make is to check the BEx reporting flag in the ODS. Is this correct and are there any possible limitations with this approach? Thanks

Hi Niten,
I read in the document...
"If the SnapShot Scenario is chosen to reduce the Query-Runtime it should be taken in account that for recovery reason and for the ability to retrace the data it is only advisable to run an InfoCube with non-cumulative keyfigures with all the movements in parallel for a certain timeframe. For the administrator it is much easier to avoid, find and repair inconsistencies in the data. Inconsistencies could happen if data in the PSA is deleted and the update-/ transferrules do not fulfill all the EndUser requirements or the coding is just wrong. A reinitialization of all the past data could be necessary. In the SnapShot Scenario the past data is nowhere stored."
Hope it helps!
Bye,
Roberto

Selection TAB in ODS and Cube

Hi Friends,
I see Selection TAB in the manage TAB of ODS and Cube, what is the difference of this TAB in cube and ODS??
Is this selection criteria we give in the Data Selection TAB of Infopackage for that particular data target??
Thanks in advance,

This is to be used when you have to selectively delete data from the ODS. For example lets say you've realized that the data is being loaded incorrectly into the ODS from some time (past 3 months). But not all the data is incorrect but only for a few customer numbers (as an example). In this case, you use this selective deletion and give the customer numbers which have incorrect data and delete these records. After deletion and fixing the root cause, you can reload to the ODS using the same selections in the infopackage (mark the request as full repair if you have deltas going into the ODS at the same time). Hope this helps.

GL data ODS and Cube

Dear Friends,
Why we are loading 0FI_GL_4 data into first ODS and than Cube.
Both are daily delta uploads.
Is there any special reason?
Regards
ramu

From a business perspective you can change a GL document therefore you need the DSO to resolve the duplicates for an after image extractor
However for CCA - you cannot change the source documents therefore in CCA even though it is an after image extractor you do not need a DSO to resolve this

Delete request in ODS and Cube from process chain

Hi Experts,
I have the next situation: I have a process that each month need to extract data with a selection criteria of fiscalperiod and fiscalyear, only I can maintain a data request with this selection. For this, I need a delete the old request when I am extracting new data with the same selection criteria, in ODS and Cube.
Is it possible?
Thank you very much for your collaboration.
Regards,
Jeysi

Hi Jeysi,
DSO works on 'Overwrite' principle.
You need to check your data source.(The images your data source sends).
Even if your updating the key figures using addition method, the data source will send you the correct images and correct delta to keep your DSO as a reflection of the latest image of your source system.
Hence you would not require to delete a request with the same selection in the DSO.
Moreover, if you have a cube at the downstream of the DSO, loading deltas from the DSO to cube would alone be sufficient and you would not need to use delete overlapping request.
However, if you are loading full request to the cube from the data source with the selections of fiscal year and fiscal period , then yes you do require delete overlapping selections.
In 3.x data flow, this was configured in infopackage in data target tab there is one column for automatic deletions, here you could set the conditions on which the overlapping request in the data target(cube) in this case should be deleted.
In process chain, you can use , delete overlapping request from the process chain.under application node, load process and post processing.(This can be configured for both infopackages and DTP's)
Hope this helps,
Regards,
Sunmit.

ODS and cube data

Hi All,
Please let me know the difference between ODS and Cube practically with a simple example. I red and know diferences but I did't get the concept.
1. What detail level reporting. How ODS supports this and not in Cube?
2 .When we go for ODS(daily/latest info) and Cube(monthly/ aggreated info )?
3.Where can we see the diff. I know overwrite & addition?
Please explain me with example.Surely I will assign points.
Thanks in advance.
Cheers,
Sri.

HI ALL,
Thanks for your immediate replies.
I did a file upload with full load to ODS:
1st load
======
CID PRICE QTY
C01 10 1000
C02 20 2000
C01 20 2000
In Active table & change logs:
======================
CID PRICE QTY
C01 20 2000
C02 20 2000
2nd load
======
CID PRICE QTY
C01 35 1500
C02 40 2200
C03 5 100
2nd load Active table
=================
CID PRICE QTY
C01 35 1500
C02 40 2200
C03 5 100
In Change table
======================
CID PRICE QTY
C01 20 2000 N
C02 20 2000 N
C01 35 1500
C01 20- 2000- X
C02 40 2200
C02 20- 2000- X
C03 5 100 N
I generate report on ODS, but we I can't see any details. It shows only latest info , what we have in Active table.
We can do the same detailed in info cube also, if we check DB aggregation.
I have a doubt:
customer orders in a day :
CID PRICE QTY DAY
C01 5 15 2007.05.03
C01 5 25 2007.05.03
C01 5 35 2007.05.03
C01 5 45 2007.05.03
we load this 4 times and overwrites evry time and see the latest record.
In ods : we can see :this only : latest :
C01 5 45 2007.05.03
In Cube: we can see
CID PRICE QTY DAY
C01 5 15 2007.05.03
C01 5 25 2007.05.03
C01 5 35 2007.05.03
C01 5 45 2007.05.03
and if we check DB aggregation. we can see
C01 5 120 2007.05.03 (summed all)
With my know knowlege we can see detail BW report on cube . all 4 records we can see , but in ODS we ca see this rec
C01 5 45 2007.05.03 only
Please explain , how ODS support detail record and cube supports summarized.
Thanks in advance.
Cheers,
Sri.

ODS and Cube

Hi Epxerts,
When we say the difference between ODS and Cube : we Say cube is summerization data and ODS is Detailed data .What exactly this meaning.
Plz explain with example.

Hi,
Consider a scenario where gives detailed description:
There are three main steps to the entire data process:
step1:
Loading the data into BW and storing it in the PSA
The data requested by BW is stored initially in the PSA. The PSA is a transparent database table, in which data is saved, per request, in the format of the transfer structure. A PSA is created for each DataSource and each source system. The PSA is the storage location for incoming data in BW. Requested data is saved, unchanged, to the source system.
Processing and storing the data in ODS Objects.
In the second step, the ODS Objects are used on two different levels.
In level 1, the data from an InfoSource from several source systems is stored in ODS objects. This allows data to be saved in a consolidated way in the technical format of BW. The transfer rules cleanse the data from the source system-dependent data format of the PSA. In level 1, the data is stored at document level (for example, orders and deliveries) and constitutes the consolidated database for further processing in BW. Reporting is therefore not usually carried out on the ODS objects at this level.
In level 2, transfer rules subsequently combine the data from several ODS objects into a single ODS object in accordance with business-related criteria. The data is very detailed, for example, information such as the delivery quantity, the delivery delay in days, and the order status, are calculated and stored per order item. Level 2 is used specifically for operative reporting issues, for example, which orders are still open from the last week. Unlike OLAP reporting, where very large quantities of data are selected, here data is displayed and analyzed selectively.
Storing data in the InfoCube
In the final step, the data is aggregated from the ODS object on level 2 into an InfoCube, meaning in this scenario, that the InfoCube does not contain the order number, but saves the data on a customer, product, and month level. OLAP reporting using the BEx Query is also run on this data. You can still display the detailed document data from the ODS object whenever you need to. Use the Report/Report Interface from a BEx query. In this way, you are able to analyze the aggregated data from the InfoCube, and target the specific level of detail you want to access in the data
reward helpful answers..
shylaja.

New fields addition to BW 3.5 version ODS and Cube and transport to PRD.

Hi,
We have a scenarion on 3.5 wherein there is a enhancement to ODS and Cube(few new fileds are added), this New ODS also feeds data to Cube. Since we do not had data on Quality system, we had no problem in adding fields to ODS and cube, but now we need transport these changes to Production, In production ODS and Cube has large data. we have few doubts.
1. Shall we need to delete data from ODS and Cube then Transport request to Production server.
2. Is it ok to move transport request without deleting data in ODS and Subsequent Cube in production system
Guys and Gals,
what is your suggestion on this one. WE are in BW 3.5 only. No BI7.
Please revert back.

Hi
you can directly transport that to production.
the image will over write with the existing one and for the new object add , a new table space will be created.
it will not affect the Old data
But in the Cube even if the data is there there is a concept called remodeling
http://help.sap.com/saphelp_nw70/helpdata/en/58/85e5414f070640e10000000a1550b0/content.htm
hope this helps
santosh

Inventory management snapshot model using Datamart Interface

Hi,
We have implemented Inventory management NON-CUMULATIVE scenario.
Now for reporting needs we are adding snapshot model and trying to use datamart interface to fill up snapshot cube.
But how to get value of KF say "ZTOTALST" becuase NON-*** cube has only changes stored as "0RECTOTSTCK" and "0ISSTOTSTK". If anyone has implemented or has any ideas on using snapshot model with datamart interface , please help .
regards,
Daljit Boparai

Try out with this
http://help.sap.com/bp_biv335/BI_EN/index.htm
Regards
Kumar

Error while loading data from write optimized ODS to cube

Hi All,
I am loading data from a write optimized ODS to cube
I have done Generate Export Datasource
schedulled the info packge with 1 selection for full load
then it gave me following error in Transfer IDOCs & TRFC
Info IDOC 1: IDOC with errors added
Info IDOC 2: IDOC with errors added
Info IDOC 3: IDOC with errors added
Info IDOC 4: IDOC with errors added
Data packege 1 arrived in BW Processing : selected number does not agree with transferred number
Processing below is green
shows update of 4 new records to Datapackage 1.
Please provide inputs for the resolution
Thanks & Regards,
Rashmi.

please let me know, What more details you need?
If I click F1 for error details i get following message
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
Thanks & Regards,
Rashmi.

How to Match / Lookup in ODS and Cube

Hi Friends
I need to Match a field " Status " in an "ODS" and " Infocube " ,
If this match found ( from ODS and Infocube ) I need to Create a New Cube with the matched data.
Pls give me some idea how to do this Match /lookup to get Matched Status field Values to New Cube
Thanks
Sree

Hi Sree,
You can do this.
Create a transformation from ODS to new cube.
In the transformation write a start routine.
Here read data from the cube by using function module "RSDRI_INFOCUBE_READ" into internal table.
You can pass the filter and fields which you want to read from the cube to this function module.
By looping on the soruce package and the internal table which contains the cube data, check if the data is matching or not. If a record is not matching then delete it from the source package.
This way, after the start routine source_package will have only those records where status is matching.if status is not matching for any record , then 0 records will be loaded to new cube.
THis will surely help.
- JAimin

Inventory Management - Snapshot Scenario

Hi,
We are implementing the Snapshot scenario for inventory management based on the "How to Handle Inventory Management Scenarios in BW" and am facing the problem on the point 51 in the document.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
"51. Create a start routine to multiplicate the old row with minus 1, set the record mode to R Reverse-Image and create a new row with the month 12.9999, if the ...."
the logic seems to be incomplete. Has anyone implemented this scenario. Please let me know what is the missing piece.
Thanks
RK

I am only in design phase. I have post this message because the How to guide is old and I would know if someone have find a new solution ( with less step to reduce development phase).
As not recent solution is provided, I use the how to guide and adapt because I have more indicator to implement in my solution.

Loading to Inventory Management Snapshot ODS and Cube

Similar Messages

Maybe you are looking for