Loading various addresses in CRMXIF_PARTNER_SAVE_M

Hi,
Can I upload multiple adresses in E101_EI_BUPA_POSTAL_ADDRESS and E101BUS_EI_STRUC_ADDRESS while uploading BP data through LSMW? if so, then how do we distinguish lets say Invoice to part address/Sold to party address... etc while populating the segments?
Thanks,
Avimanyu

Hi,
i don't know what you really want, but have a look to the Interface IF_EX_CRMXIF_PARTNER_MAP, perhaps it helps.
torsten

Similar Messages

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful. Mid 2013 iMac.

I don't know how rare this is. I went a week or so without a problem, and now it's starting to recur. Also, in some instances, an email will look unsent (remain in the outbox on the Treo), but it has been sent, and recipients are replying while I'm trying to figure out what is going on. Further, it will send the same email over and over during this madness.
This is a show stopper. If there isn't a software fix soon, I may chuck this phone in the garbage.
Post relates to: Treo 800w (Sprint)
UPDATE: The problem comes and goes. The next day, no changes to the treo, everything workeds. Now i'm suspecting the sprint server, and how it/the phone responds from failing to send while roaming. I've since turned off roaming, and haven't had a problem for several days.
Message Edited by slrichardson on 12-22-2008 01:12 PM

Cisco switches and virtual ip address(load balancing address) on xenapp portals

Hi I am quite new in configuring cisco switches and stumble across an issue after installing xenapp7.6 with load balanced portal to the ddc`s
It seems i only can ping or get access to portal if using real ip address behind cisco switch from other subnets in my network.
I can ping ddc01 and ddc02 and connect to the portal with http without problem. However when i triy to access the load balancing address of the ddc`s
it wont answer to ping or http
In same subnett it is no problem connecting to the load balancing address of the ddc`s, but in loactions on other subnets i only can access real server ip
eks
dd01 192.168.1.4 ok ping and access behind cisco switch from subnets
ddc02 192.168.1.5 ok to ping access behind cisco switch from subnets
load balancing for both ddc 192.168.1.6 not able to get answer og access from subnets, only in same subnett
Is there any way to configure switch to access the load balancing address of the ddc`s ?
Regards
Pål Arne Røberg

Wrong forum. This forum is dedicated to feedback related to CSC framework itself. You should not wish for response here.
Moved by moderator, no longer apply.

After install KB2889927 Outlook client cannot load Offline address book.

After install KB2889927 Outlook client cannot load Offline address book. Client says: Offline address book Connecting to Microsoft Exchange, and does nothing.
After Uninstall KB2889927 Outlook clent download address book successfully.
Somebody has a problem with KB2889927?
P.S. Exchange 2013 SP1 RU6

Hi,
According to your description, I noticed that the issue occurred after install KB2889927 for October 2014 Office 2013 updates.
I read the
November 2014 Office Update Release and find that the following KB can resolve the OAB download issue in Outlook 2013, please install it to have a try:
For Office 2013: http://support2.microsoft.com/kb/2899493
Or for Outlook 2013: http://support2.microsoft.com/kb/2899504
Regards,
Winnie Liang
TechNet Community Support

Hi! I lost all the programs on my mac book's hard-drive. I reinstalled Mac os x snow Leopard Disc, the computer, now works well.But, I am unable to load my address book and transfer some pictures for a CD (I used to have) back to the Mac Book. Can you hel

I am trying to reinstall my programs (which I lost when my hard-drive crashed) on my Mac Book.
The unit works well, having used my mac os x Leopard Cd.
I am however, unable to load my Address Book (from a stick) and some pictures from a Cd which used to work previously on the unit.
Can you help?

I am trying to reinstall my programs (which I lost when my hard-drive crashed) on my Mac Book.
The unit works well, having used my mac os x Leopard Cd.
I am however, unable to load my Address Book (from a stick) and some pictures from a Cd which used to work previously on the unit.
Can you help?

Input Field Layout - Documementation For Various Address Cleanse Engine

Hi All,
Where I can get a documentation for input field layout for various address cleanse engine available in Global Address Cleanse transformation:
1. Australia
2. Canada
3. EMEA
4. Global Address
5. Japan
6.USA
Thnaks,
Amit

Hi,
Thanks for the reply.
I meant that both usa and germany address has only street and country information and without other information.
And of cos without sufficient information, global address cleanse would not be able to correct it.
The difference i am having is that, after global address cleanse, the PRIMARY_NAME1 field of the output field of the germany record is filled up as what we gave for the input However, the PRIMARY_NAME1 field of the output field of the USA record is blank.
Both records are of status info code 2000 (Unable to identify locality, region, and/or postcode information on input. )
So the question is that, if the USA engine is not able to cleanse the data, would it map the input street field onto the output PRIMARY_NAME1 field? Or would it give a blank PRIMARY_NAME1 field?

Firefox no longer loads webpages, try to load web address and it goes back to about:home

Just upgraded to Firefox 17 from 15 and when the update installed it said successful, however when I try to load a web address the address bar blinks quickly and shows "about:home" and the webpage doesn't even change at all. Anyone have any ideas of why this could be happening?

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

"loading" in address bar

hi, only had my mac for a month so please bear with me lol. i'm running snow leopard version 10.6.2 . i switched my mac on this morning, went on line and when i enter a new site, it loads up quickly enough, but the word 'loading" and the little line circle thing doesn't dissapear from the address bar. i have to click on the 'x" next to it to get rid of it. it's been fine up until this morning. any ideas?

Hi shine01120,
Try going to your Window Menu>Activity and checking for any loading error (after you have stopped the page load with the "x"). This should show what is hanging up the full loading of the page. I'm using an older version of Safari then you but the Activity selection should be there I assume.
LS

Can I combine two methods of code to load various SWF files into the same location

I presently have a set up where a large SWF file brought on the stage by clicking small icons from the scrollable thumbnail menu on the bottom of the stage. All of it happens at the same frame with .xml loading file.
Here is the code for constructing the ImageLoader(for thumbnails) and SWFLoader for (bigger SWF files)
[CODE]
   function _xmlCompleteHandler(event:LoaderEvent):void {
   _slides = [];
   var xml:XML = event.target.content; //the XMLLoader's "content" is the XML that was loaded.
   var imageList:XMLList = xml.image; //In the XML, we have <image /> nodes with all the info we need.
   //loop through each <image /> node and create a Slide object for each.
   for each (var image:XML in imageList) {
    _slides.push( new Slide(image.@name,
          image.@description,
          new ImageLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/thumbnails/appThmb_imgs/" + image.@name + ".jpg",
               name:image.@name + "Thumb",
               width:_THUMB_WIDTH,
               height:_THUMB_HEIGHT,
               //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates
               //x:260, y:320,//doesn't work here but works in line 69
               scaleMode:"proportionalInside",
               bgColor:0x000000,
               estimatedBytes:13000,
               onFail:_imageFailHandler}),
          new SWFLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/images/" + image.@name + ".swf",
                name:image.@name + "Image",
                width:_IMAGE_WIDTH,
                height:_IMAGE_HEIGHT,
                //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates
                x:0, y:144,
                scaleMode:"proportionalInside",
                bgColor:0x000000,
                estimatedBytes:820000,
                onFail:_imageFailHandler})
[/CODE]
Here is what I would like to resolve. I have another section on the site with an image collage. Every image is a button. I want to script this each image on click to go to the label with ImageLoader and SWFLoader AND TO OPEN A UNIQUE SWF (ASSOCIATED WITH AN IMAGE CLICKED) ON THAT PAGE
Previously this is what I did to achieve it. I would specify a String:
[CODE]
var sourceVar_ProductsPopUps:String;
[/CODE]
and then all my buttons will have their unique SWF assigned for them which opens at another labeled section ("prdctsPopUps" in this example):
[CODE]
function onClickSumix1PopUp(event:MouseEvent):void {
sourceVar_ProductsPopUps="prdcts_popups/sumix1-popup_tl.swf";
gotoAndPlay("prdctsPopUps");
[/CODE]
Then in the "prdctsPopUps" section I would specify that var string to bring up SWF files. The value of sourceVar_ProductsPopUps allows to load mulitple SWFs from the previous page.
[CODE]
loaderProductPopUps = new SWFLoader(sourceVar_ProductsPopUps,
[/CODE]
But I need both of them to be working at the same time. First there is a sectionA from where a user can navigate to specifically targeted SWF to section B's SWFLoader. Then in the section B a user has an option to bring up other SWF files into SWFLoader from the scrollable thumbs menu. Is there a way to combine these two lines into one:
[CODE]
          new SWFLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/images/" + image.@name + ".swf",
[/CODE]
and
[CODE]
new SWFLoader(sourceVar_ProductsPopUps,
[/CODE]

Thanks for looking into my issue.
Unfortunatelly I am not so advanced in AS and do not complitely understand the logic of the problem. I will try to decribe my set up more precise.
So, my main flash file is broken into labeled sections on the main time line.
One of the sections is "Applications" It has an animated collage of images. Each image acts as a button and once clicked brings a user to a section called "ApplicationsPopUps".
"ApplicationsPopUps" section has small image thumbnails scroll menu at the bottom of the screen and a large SWFLoader in the middle of the screen. User can click on an image in the thumbnails scroll menu and a corresponding SWF file will load in the middle of the screen in SWFLoader. User can click on left/right navigation buttons and preceeding/following SWF file will load in SWFLoader.
Everything works fine (with your previous help)
Here is the working code for the ImageLoader and SWFLoader (please let me know if you need additional code on the page):
function _xmlCompleteHandler(event:LoaderEvent):void {        _slides = [];       var xml:XML = event.target.content; //the XMLLoader's "content" is the XML that was loaded.        var imageList:XMLList = xml.image; //In the XML, we have nodes with all the info we need.        //loop through each node and create a Slide object for each.       for each (var image:XML in imageList) {         _slides.push( new Slide(image.@name,               image.@description,               new ImageLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/thumbnails/appThmb_imgs/" + image.@name + ".jpg",               {                    name:image.@name + "Thumb",                    width:_THUMB_WIDTH,                    height:_THUMB_HEIGHT,                    //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates                    //x:260, y:320,//doesn't work here but works in line 69                   scaleMode:"proportionalInside",                    bgColor:0x000000,                    estimatedBytes:13000,                    onFail:_imageFailHandler}),                 new SWFLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/images/" + image.@name + ".swf",                   {                     name:image.@name + "Image",                     width:_IMAGE_WIDTH,                     height:_IMAGE_HEIGHT,                     //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates                   x:0, y:144,                     scaleMode:"proportionalInside",                     bgColor:0x000000,                     estimatedBytes:820000,                     onFail:_imageFailHandler})
Thumbnails in the section "ApplicationsPopUps" and images in the image collage in the section "Applications" represent the same photographs. So when a user clicks on one of the images in "Applications" section it would be natural that that image will load in the "ApplicationsPopUps" section. However "ApplicationsPopUps" section presently has a working code (as sampled above) It looks too complex for me and I do not know hot to implement this feature. I do want to keep the functionality of the thumbs image scroller in section "ApplicationsPopUps" as it is now. But I want to add that when a user click on an image from section"Applications" then that particular SWF file will load in SWFLoader in section "ApplicationsPopUps" and then the present functionality can as well be exectuted. Presently it just opens on a first image in xml order.
P.S. I see that you had a download link in your answer. How did you do it? I could also upload a small sample file with my problem. This way you could see all the set up right away.

Problem loading email address

I have an email with a private domain, so am selecting "other" for type of email. Once typing in the email address and password, I get the error "Mail couldn't sign in. Please try again". I am using the correct details. Could someone advise please?

Abi99 - no I don't, it is with a proper hosting company. My email address is basically myname@mysurname - but I am only asked for address and password, never having gone beyond this stage. I have been able to do this on 3 other brands in the past, but having lost/broken them, got the Nokia 311 as an interim measure.

Cant load ip address with port number

I am trying to load my vps control panel at https://ipaddress:9999/ on firefox 4 mac and I cant open the page. Firefox wont respond at all when I hit enter. I can open it without issue in safari and chrome.

I was thinking that could be it, but didnt couldnt find those articles. Unfotunately, the override didnt work. It's weird. Its as though the browser will not even respond when I hit enter. No error messages or anything. Just a white screen.

OOPs the browser is blocking my loaded email address book - How do I fix this?

Oops browser is blocking popups - error msg - comes up when I try to access my email address book.
How do I stop this from happening?

To turn off pop-up blocking for a site, you could try this (open the dialog using either of these):
* right-click a page on the site > View Page Info > Permissions tab
* while viewing the site: Tools menu > Page Info > Permissions tab
Under Open Pop-up Windows, uncheck "Use Default" and click the bubble for "Allow", then close that dialog.
Does it work?

Loading limited addresses into auto hard drive

I purchased a 2009 BMW with bluetooth. I have more contact info in my Blackberry than the BMW hard drive will accept. Therefore, it loads the contacts starting with the A's and only accepts 100 contacts. How can I load only the desired 100 contacts that I want into the BMW hard drive.

I think that would be a better question for http://bmwforums.com/forum/
But I would guess you would have to delete the extra ones from your device.
If someone helped you give them kudos. Research all info!

Load various apps in different Spaces at login?

Hello all,
Is it possible to launch, at login, different apps in each space of Spaces? I'd like upon login to have each one of my four spaces to have apps preloaded. Some apps need to be usable in all spaces, some not. I know you can assign login apps to a specific space, but that is not what I need. Since the Login prefs panel doesn't allow to select a startup launch Space for each app, I've been searching high and low for a solution. Maybe Automator or Applescript, but I know very little about both. Thank you for any help !

Thanks WBW, but won't that cause the behavior I'm trying to avoid, ie systematically opening a given app in a specific space? I know I can do that in the spaces prefs, but what I want is keep all apps able to be opened in any space, while having each space launch a specific instance of certain apps upon login. For instance, I have a space for entertainment and another for work, among others, so I'd need a copy of Firefox in each, for instance, along with a text editor in the work space and a video player in the entertainment one, for example... does that make more sense? I apologize for any ambiguity.

Cannot load vpn address onto ipad

I Have my expat vpn. It works fine on my iPhone 4 s . But will not work on my iPad using same ios 8.
any advise please help

This is a wild stab-in-the-dark but a system Reset cures many ills and takes but a minute to perform:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A Reset does NOT delete apps, photos, movies, music or any other data. A Reset does NOT delete any settings for email, network access, etc.
Also, you might wish to download the 4.2 User Guide. Pay special attention to page 170.
http://support.apple.com/manuals/#ipad

Loading various addresses in CRMXIF_PARTNER_SAVE_M

Similar Messages

Maybe you are looking for