Loading video on youtube don't working :(

Hi,
I have version 11,1,102,55 installed of adobe flashplayers.
When I want to watch a video on youtube, it's start loading and it's stop a couple of second or minutes later for no reason and the loading bar go at the end of the video. I can't move the cursor forward because it's blocked. I reinstall flash last week to view if it will correct the problem, but it din't work.
I have windows 7 64x bits and I have a laptop. The video work very well on my normal PC, but not on my laptop.
When I watch more than 1 video at the same time, it's stop loading at the start of the video and the loading bar go at the end of the video.
1st: I don't have a FLASH folder, because I couldn't save them when installing. It's said RUN, SAVE (din't work) or CANCEL.
2nd: My flash is installed in my cumpter.

I think we should try a clean reinstall of Flash Player; do the following
go to http://forums.adobe.com/thread/909550
download the 64-bit uninstaller and save it to disk
download the 64-bit installer (for Internet Explorer) and save it to disk
close all browser windows, then run the downloaded uninstaller
restart Windows
using Windows Explorer, go to C:\Windows\system32\Macromed\Flash and delete any remaining files in there
using Windows Explorer, go to C:\Windows\syswow64\Macromed\Flash and delete any remaining files in there
now run the downloaded installer
Can you now see the Flasg animation at http://www.adobe.com/software/flash/about/ ?

Similar Messages

M30 - Front Mode and Audio/Video Control buttons don't work

Hi
The Front Mode and Audio/Video Control Buttons Don't Work
Any ideas?
Thanks

Hi
As far as I know the Toshiba Controls utility is responsible for key usage.
Did you try to install Toshiba Controls?
Check the Toshiba driver page for this driver.
Bye

Hello. Recently I am having a problem of loading video from youtube. The message "loading" keeps go on and on and nothing happens.Can you advise on how to fix this problem ?

Hello.
Recently I am having a problem of loading videos from Youtube.
The message " loading" keeps go on and on and nothing happens. Can you advise on how to fix this problem.
Thank you inadvance.

This problem has been fixed. I rebooted my laptop after clearing my Firefox cache and deleting all cookies. Once my laptop was rebooted, I opened Firefox and now I can access the regular YouTube site, not the mobile site.

Uploading videos to YOUTUBE doesn't work anymore

HI I upgraded my flash player to the latest adobe flash for
windows xp,
and now I can't upload any videos to youtube.. It used to
work, until now.

When you upload the site is has nothing to do with iWeb and people who work for the hosting companies and say that iWeb is the problem or is rubbish do not have a clue what they are talking about. They use it as an excuse because they don't understand what they are doing.
What folder do you have to upload your site to on the server? Is it called "public_html", or "htdocs" or something like this? If so, then in the directory/path, where some can leave it blank, you can enter public_html or htdocs or whatever file you upload to on your server. This should then work.
Your other option of course, is not to use the iWeb built in ftp, but to select publish to a local folder and then download Cyberduck - a dedicated ftp programme and use this to upload your site. If you use Cyberduck, then you can connect directly with your server and you can see exactly where all your site files are being uploaded to and exactly what folder on your server you have to upload to. If you use iWeb ftp, then you are working blind really and just hoping for the best.
Either try inserting the name of your folder in the directory/path section or publishing to a local folder and using Cyberduck to upload instead.

MSI fx5600 VTDR-128, video in function don't work

VIDEO IN DO NOT WORK!!!
drivers ver: 52.16 and wdm: 2.20
tried many different capturing software
checked video source and cable
don't work s-vhs nor composite
nview: disabled
Any help welcome!!!

ewaller wrote:
What is under the switches tab?
Oh -- By the way, that picture is over the size limit defined in the forum rules in tems of pixels, but the file size is okay. I'll let it slide. Watch the bumping as well.
If you want to post the switches tab, upload it to someplace like http://img3.imageshack.us/, copy the thumbnail (which has the link to the original) back here, and you are golden.
I had a bear of a time getting the microphone working on my HP DV4, but it does work. I'll look at the set up when I get home tonight [USA-PDT].
Sorry for the picture and the "bumping"... I have asked in irc in arch and alsa channels and no luck yet... one guy from alsa said I had to wait for the alsa-driver-1.0.24 package (currently I have alsa-driver-1.0.23) but it is weird because the microphone worked some months ago...
So here is what it is under the switches tab

Video/Audio Chats Don't Work (Screen Sharing as well)

From the time that I got my mac, I have been able to both audio and video, although not screen sharing. I can live without screen sharing, but it would be nice to have if fixable. Now though, audio and video chats don't work at all. I always get an error message that reads,
"There was a communication error during your chat.
Failed to start Video Chat because:
_________ cancelled the connection."
I know that my friends aren't canceling the chats, and especially the appleu3test02 bot.
Any ideas?
Thanks
Message was edited by: pretty good, but not great

How have you set up your router or modem to allow the ports iChat uses ?
9:11 PM Wednesday; January 9, 2008

Videos On YouTube Don't Display On Mobile Devices

I have tryed exporting from final cut pro x as apple device 1080p and then upload to youtube, as well as try and upload to youtue right from final cut pro. Either way i can not for the life of me figure out how to make it viewable on mobile devices. For instance if i go to my channel on my ipad and check it says "video not avalidable for this platform" or sometihng of that sort.
Thanks for the help
buggy687

I'm having a similar problem. When I upload the videos to youtube after editing in final cut pro, the videos will play fine on computer and my ipad, but something happens on iphone and android phones. The video will work on these mobiles, but the sound is all screwed up. In more depth, the interviews I recorded on my zune h4n are screwed up but the music i overlayed is actually perfect.
Also, if i plug in headphones to send the audio from my phone to airplay speakers, it works fine. the audio only stops working through iphone speakers. help?

Trouble loading videos on YouTube

All of the sudden I am having trouble loading videos on you tube. I can search but it does not load.

A lot of persons have this problem, including me. I have spent hours with Apple support over the phone. They claim Saffari can not load youtube, which is a LIE ! The youtube app, well they are not responsible for. Soooo, I guess ipad can not be used for youtube until they come up with a fix. They recommend calling youtube and complain there. My Iphone can load youtube from safari, and from the youtube app, no problem.
Tried reseting, turning on/off, closing all the other apps, etc. NO USE.
Maybe one day they apple will admit they have a problem with this and fix it.

Firefox can't load videos from youtube onto tumblr, why? D:

i tried uploading a video from youtube onto tumblr but firefox won't play it where as googlechrome does. please don't make me use google chrome =[

'''If you are running Adblock Plus...'''
While on a YouTube page, right click the ABP icon and "open blockable items".
When the window opens at the bottom of the page, right click this line: http://s.ytimg.com/yt/swfbin/watch_as3-vfl9DouAr.swf (or some variation) , then "Disable Filter".

I am not able to view videos on youtube, it stopped working last night after a brief power outage. What do I need to do to restore the ability to view youtube videos?

The power went out for a few seconds, when I went to watch videos on youtube, I was not able to. What do I need to do to restore this option. It seems to affect only youtube videos.

Duplicated: https://support.mozilla.com/en-US/questions/846960

Loading videos on youtube

Hello everyone, just curious I have a 96 MB video I'm trying to upload on Youtube and so far it has taken an hour. I compressed the video by exporting to quicktime conversion in FCP. Then once I got the file compressed to a acceptable size I transferred the file to a flash drive and hooked it up to my pc to upload the video on Youtube. Here's the specs
1. compressed using H.264 compression
2. then transferred from powermac G5 to flashdrive (no internet connection on
G5) and currently waiting patiently for video to say you have successfully
uploaded your video to youtube.
3. Using Hi-speed connection to upload video
QUESTION: Is there an amount of time (an estimate) that it takes to upload a
video for example and hour per 100 MB file if the uploader is
utilizing a high speed connection?
Thanks for the help guys and gals
Erv

Most high speed service providers provide service that is optimized for downloading not uploading. As a result your file transfer rates going out are a fraction of what they are coming in. You may want to check with your ISP to confirm this and see what you options are.
You can verify this by opening activity monitor and clicking network. This will display relative speeds uploading v/s downloading.
Other factors can affect file transfer times like network traffic, website traffic, website bandwidth, etc.
Sorry for no specific answer but I hope this information will help you to answer your concerns.
Best Regards,
David Finell

Firefox will not load videos on YouTube Mobile. It states that Flash needs to be updated, but it works fine in the Android browser.

When I browse to YouTube mobile (http://m.youtube.com/), and click on a video, it takes me to the video's mobile page. Once I click on the video itself (to play), it redirects me to the desktop version of the same video page and tells me I need to update my Flash plugin.
Until earlier today, it was not redirecting me to the desktop pages, but now it is.

Sorry, Flash for Android is not yet compatible with Firefox for Android. We hope to work with Adobe to fix this in a future release.
You can play some YouTube videos by enabling YouTube's HTML5 beta. Only videos available in the WebM or Theora formats will play in Firefox for Android: http://youtube.com/html5

Listen Audio Player when loading video from Youtube

Hi everybody
I'd like to solve such problem: when an online video (for example, from YouTube) is loading, the audio is completely controleld by firefox.
I mean...
Let us suppose I want to listen some songs while an online video is loading.
It seems I can't, as the audio "works only for the online video".
How can I decide which "sources" I want to listen?
Any ideas?

I don't know, linked wiki articles seem a bit difficult to me
Looking at the titles, however, it seem they not help me, as they talk about
NO SOUND IN FLASH
and this is not my problem (which is, in some sense, teh converse).
I'd like not to listen the sound of flash video within a web browser

Flash Video Cue Points don't work

I used the template sample from Adobe named :Flash video
template: Showcase website for personal video...I followed all the
steps sugested. I used Flash Video Encoder, created the cue points,
worte down the location of those cue points, which I wrote exactly
in the Settings.XML file for each chapter....etc. I guarantee you
that I did it all as sugested...In fact several months ago, it
worked for another project and another videos that I had.
But this time, when I am testing it, the video appears in the
screen all right but when I select a chapter for the section of
that video, an error appears like this :
VideoError: 1003: Invalid seek
at fl.video::VideoPlayer/seek()
at fl.video::FLVPlayback/seek()
at
Video_fla::MainTimeline/chapterClickHandler()[Video_fla.MainTimeline::frame1:184]
VideoError: 1003: Invalid seek
at fl.video::VideoPlayer/seek()
at fl.video::FLVPlayback/seek()
at
Video_fla::MainTimeline/chapterClickHandler()[Video_fla.MainTimeline::frame1:184]
My Settings file has the correspondent locations for each cue
point, like this :
<?xml version="1.0" encoding="utf-8"?>
<showcase>

<section>
<title>Safety Fair 2008</title>
<video>video/MOPS_safetyFair.flv</video>
<cuepoints>
<cuepoint>
<title>Fire Department 1</title>
<time>00:00:13.291</time>
<image>img/Gath1.png</image>
<caption>What to do in case of a fire at
home...</caption>
</cuepoint>
<cuepoint>
<title>Fire Department 2</title>
<time>00:01:39.686</time>
<image>img/Poison Center.png</image>
<caption>How to escape from a fire at
home</caption>
</cuepoint>
<cuepoint>
<title>Crime Stoppers</title>
<time>00:01:51.869</time>
<image>img/TxDepTra.png</image>
<caption>Buckle up...</caption>
</cuepoint>
<cuepoint>
<title>Texas Dep of Transportation</title>
<time>00:01:51.869</time>
<image>img/Poison Center.png</image>
<caption>Assistance by phone in case of
emergency...</caption>
</cuepoint>
<cuepoint>
<title>Poison Center</title>
<time>00:02:02.946</time>
<image>img/Gathering3.png</image>
<caption>Mops Gathering at the FLC Picnic
area</caption>
</cuepoint>
<cuepoint>
<title>Fellowship</title>
<time>00:02:09.591</time>
<image>img/Kids-with-Jenny.png</image>
<caption>Nice visit and gathering w/our
children</caption>
</cuepoint>
</cuepoints>
</section>
I have my file structure right as well in each folder IMG and
VIDEO.
What does this error means and how can I correct the
problem.....I have been expending hours trying different ways and
still can't get it to work.
Thanks,
Edna

you don't need a cuepoint to detect the end of your video. use:
var lo:Object = {};
lo.complete = function(eObj:Object):Void {
next_btn._visible=true;
flv_pb.addEventListener("complete", lo); // <- use the instance name of your flvpb component

Some videos on YouTube are not working

Vevo or any other official music videos are not playing in Firefox. After loading for 10 seconds, I am getting "An Error occurred" error. I don't have this problem with other videos.
This problem occurred yesterday, although I didn't do any system changes or software updates during the day. In Internet Explorer 11 which using HTML5 Player by default, those videos are starting to play but only after 10 seconds load and not immediately like other videos. When forcing HTML5 Player in Firefox those videos are starting to play after 10 seconds load like in IE but HTML5 Player is very instable in Firefox. Software wise everything is up to date and I already reinstalled both Firefox and IE but the problem is still there. Even System Restore didn't help. Net research also didn't bring any solutions.

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences'''<Enter> in the address bar
Select '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Loading video on youtube don't working :(

Similar Messages

Maybe you are looking for