Loading Windows 7 on new hard drive
I have a Mac Book and I just upgraded to a 500gb hard drive and restored it from Time Machine and everything is working great. On the old original drive I was able to use Boot Camp and partition the drive to run Windows 7 Ultimate and it worked fine. Today I used Boot Camp to partition, and it asked for 32-bit software (I have 32 & 64 disks). I did so and it started up, but got amessage, “that windows must be installed to a partition formatted as a NTFS” Did I miss a step and can anyone advise on what I need to do?
In Boot Camp Assistant:
See the checkbox: Doownload the latest Windows support software from Apple. You can download the drivers to a USB flash drive or USB drive connected to your computer. Format the USB device in Disk Utility:
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the partition scheme to MBR. Set the format type to MSDOS (FAT). Click on the Options button, then click on the OK button. Click on the Partition button and wait until the process has completed.
Similar Messages
-
Trying to load windows onto new hard drive from usb, stuck at "starting windows" screen
So I am actually down grading from windows 8 pro to windows 7 pro both 64. I was finally able to get the comp to not only recongize, but load from the usb. My problem is that when it does start up, I get stuck at the "Starting windows" screen. I was wondering maybe I need to format a patition first? It is a new warranty hard drive from Lenovo. (Kind of funny how that send only cds for a laptop that has no cd drive) I looked into formatting from a usb, have had some trouble finding a reliable way.....thanks
Solved!
Go to Solution.Hi davefromsb,
Windows 8 computers come with a "UEFI" bios and therefore will come with "Secure Boot" as well as "UEFI Only" booting enabled. Disable secure boot if you haven't already, and switch the booting method to "Legacy Only". The problem is most likely that the Windows 7 image that was burned to the USB stick was burned using a MBR partition scheme instead of a GPT one. Hope this helps.
-Brian Chan
My Thinkpads: T42 (GPU failure), T60, W530
W530: Windows 7 Pro | i7-3720qm | FHD screen | 256gb Samsung 840 Pro SSD | 500GB Ultrabay HDD | 16gb Crucial RAM | Nvidia K1000m -
Windows 7 won't load after installing new Hard Drive and Recovery software
HP G72 Notebook PC
xz218UAR
I guess a virus crashed my hard drive so I bought a new one. I installed the new drive and loaded the recovery disks that I also bought from HP. Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS. I've tried starting over from Disk 1 but it's not doing anything different to fix it.
I removed the new hard drive and reinstalled it but it's still doing the same thing.
What am I doing wrong and HOW DO I FIX IT?Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Can I load "Pages" onto new hard drive without having to pay for it again?
I have a 5 yr old Mac that just had it's hard drive replaced. I had paid for and loaded Pages onto the original hard drive. Wondering if there's any way to load Pages onto my new hard drive without having to pay for the program again. Thanks so much
If you originally installed Pages from a CD or DVD, reinstall it from there.
If you installed Pages from the Mac App Store, yes, from the Apple ID you purchased it with.
If you got Pages from the iTunes App Store, the Mac version of it is a separate purchase.
(67842) -
M7 -j010dx: need help w/recovery Windows 8 new hard drive
installed new hard drive installed (old one hard disk (3f0) error and confirmed dead by Geek Squad). I have recovery discs from HP. how to proceed from here? Tried the "put App and Driver recovery disc in and turn on" route. no go and same "Boot device not found. Please install operating system on your hard disk. hard disk (3f0)." error comes up.
Is there more to the process than this? I'm not getting what's going on.
Thanks in advance...
This question was solved.
View Solution.correct. kicked it right back out.
still moving positive... -
Windows did not detect any networking hardware, Windows 7, New Hard Drive
Message "Windows did not detect any networking hardware"
Satellite P505 S8980 Windows 7 Home Premium.
I replaced the Toshiba 500 GB HD with 500 GB Seagate.
Device Manager icon for any device with yellow exclamation mark,
Click on "Update Driver". Lan eNet details as follows:
Antheo - R8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
Browse to the folder where the setup program has the driver...
Message: "The best driver software is already installed."
(But the yellow exclamation mark still harasses me.)
--- Go to "Setup new connection" ---
"Choose a connection option"
Click on "Connect to the Internet"
Response: "Windows did not detect networking hardware"
As near as I can tell, that translates from error 0x8E5E0247
I have this same error on other yellow exclamation marks respective of what kind of device it is.
=> To test my sanity, I put the old hard drive (same size) back in and except for the impact of slowness due to error retries, everything works okay.
Note:
Same issue (hardware not detected) for Video adapter and Audio.
I bought new USB Wireless adapter to test, and the driver installed but not activated because "not digitally signed", and that same issue fits all the above hardware. I down loaded them from Toshiba, and they are confirmed installed, but not accepted with digitally signed. I have uninstalled and reinstalled with same results.
Solved!
Go to Solution.I'm discovering I am not as well as I thought... running on the AF hard drive which was built with a copy drive from old format drive which was the product of system recovery disc set.
Review for context: Advanced Function HDD
Scenario that exposes harm caused by cloning data from 4K blocks drive to 512 bytes blocked drive (AF)
Toshiba supplied Windows-7 System Restore Discs: to factory state
Then I built the Windows-7 Repair Disc... used later.
Hard drive was replaced when it caused SMART warning at every system boot.
Acronis was only utility that quickly detected problem (3 sectors had permanent read errors.) Active@Disk Image and Power Quest Drive Image (Ghost) did not detect the issue.
I tried Seagate 500 GB and Western digital 500 GB HDD drives as copy target.
That new drive would not boot: "Required source not found"
Booted My newly created Windows-7 repair disc, and used to to fix startup.
See images.
That worked and then the ST9500423AS disc booted.
Now... next day I discovered Window Update is not working.
I get message:
Windows Update cannot currently check for updates, because the service is not running. You need to restart your computer.
I ran Microsoft Fixit for updates. It says it fixed two items.
I still have the problem.
The service shows "started"
Control Panel/ ACTION Center/ Maintenance/ Check for Updates
"No action needed"
"Windows Update does not require any action"
I checked Update History...
... It is empty, else window is vacant... blank.
Soooo..... for a sanity check, I swap out hard drive; go back to the old format (which is the one I copied).
It works! 7 updates to install, including SP1... but I did NOT install them.
Switch back to the AF drive... Update doesn't work. I am broke again.
Is this another strange problem caused by the Advance Format issue?
What to do?
By the way... I did install an Intel storage Matrix driver update, but I do not have RAID chip, so that driver is not for me... unless I missed out on something.
Carl -
Install Windows to new Hard drive from USB system backup
I have bought a new 1TB hard drive for my G580 and have created a USB system recovery drive using Windows 8.1's system restore functionality but when I swap the drives out and try to reset the PC to factory setting settings it fails by saying a partition can't be found. I've formatted partitioned and formatted the new drive but to no avail.
Any ideas?
Solved!
Go to Solution.I have a Lenovo G580 laptop with UEFI firmware (BIOS) embedded Windows 8 product key. These instructions will work in my computer.
How to install Windows 8/8.1 to a blank hard disk from the Windows 8/8.1 recovery USB flash drive?
http://www.eightforums.com/installation-setup/44021-need-help-reinstalling-windonws-8-usb-2.html#pos...
-or-
How to clean install Windows 8.1 if you have an OEM computer with UEFI firmware (BIOS) embedded Windows 8/8.1 product key?
http://www.eightforums.com/installation-setup/38486-need-help-formatted-genuine-windows-8-lenovo.htm... -
Re-loading itunes on new hard-drive
I would like to know the safest way to reload my itunes program and files into a larger hard disk. Basically my C drive is almost full and I want to transfer and run itunes from the D drive.
Firstly is iTunes set up such that it keeps the iTunes folder organised and is it also set to copy new files to the iTunes Music Folder when adding to the Library? These and other settings can be found under Edit>Preferences>Advanced>General.
If not I would make it so and then and only then I would select Consolidate Library from the Advanced menu of iTunes. This will then copy any files from 'outside' the iTunes folder into it.
Once you have done all the above:
Copy the iTunes folder from it's location on your 'C' drive to your 'D' drive. Once the copy has finished check the contents of the itunes folder and see if most things are listed.
Next navigate again to Edit>Preferences>Advanced>General
Next to the iTunes Music folder location click the Change button and now navigate to the iTunes folder you copied to you 'D' drive and make that the new location for your iTunes Library.
Now not until you are happy that all your files are in the new location do you delete the old iTunes folder!!
If you do find any that are missing first check that the settings are as above and drag the missing files to the iTunes Library icon in the main iTunes window. iTunes will now add those files to the library and copy them to its music folder on the 'D' drive.
Phil -
Lost my hard drive and also an Ipad, but have 7 k photos on a Touch that I need to load on fixed IMAC with a new hard drive, how do I do it. (There were more photos than the 7k, but they were saved on other drives, thank goodness). 7K pohotos on the Touch are no where else, must be saved! Just never went from a Touch to iMac. I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics! New Aperture and IPhoto on IMAC with no other photos loaded on the new hard drive yet.
I'd ask in the iTouch forum where there are more iTouch users there than here and they should know how to off load the photos. It might take a 3rd party app.
OT -
How to install and reconfigure a new hard drive?
How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can giveHow to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
I know how to physically install it i just need help with the software part. and my current hard drive is backed up on my time machine. The MBP is running mountain lion
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
How do you install 10.7 onto a new hard drive
I have a 2008 Mackbook pro with a 200 gb hard drive which is full.( it filled up very quickly after installing 10.7. I have the 10.5 disks that came with it and the 10.6 disks that I got from Apple last year. Then I upgraded to 10.7 by downloading it from apple. I have a time machine back up copy of my system on a firewire hard drive.
I am going to Install an new hard drive and was thinking of doing that myself to save a few dollars of instalation fees, but I am not sure haw to reinstall 10.7?
Do I Install 10.6 from the disks and then download 10.7? Do I have to upgrade to 10.6.8 and then 10.7? Or is there some way of getting directly to 10.7?How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
Load Leopard on a New Hard Drive with Windows XP already loaded
How can I load a new, fresh Leopard operating system on a new hard drive, with Windows XP already loaded and working on it's own independent hard drive via bootcamp beta. I have been using Tiger on it's own drive and wish to discontinue Tiger and move to Leopard without reloading windows. Can I just put in a new drive, and load Leopard with the Windows drive in place?
Please, any suggestions would be appreciated.
Mac Pro Mac OS X (10.4) Runing Windows and Mac operating systemsMalcolm:
Thanks so much for replying to my question! I am new to MAC and have Tiger and Windows XP on separate drives. I will be removing the drive with Tiger and putting in a new drive to load Leopard and I wondered how that would effect accessing Windows XP since the Windows drive will remain in the system. Is there anything I need to do with bootcamp, since Windows was loaded using the Beta version of bootcamp, and bootcamp icon currently shows in the Windows XP taskbar. Tiger was pre-loaded when the computer was purchased. In fact I had to backdate the beta bootcamp version in order to get it to work. I hope this is not asking too much, but I wondered if there would any problem with Windows after the Leopard load.
THANKS IN ADVANCE!! -
Hp 6310y can't get new hard drive to load windows 7
model 6310y -- Windows 7 home premium 64 bit
My desktop PC stopped working. I took it to local computer store and they said it was HD. I bought new hard drive and tried to install retail Windows 7 home premium 64 bit OS. I got an error message Code 0x80070002.
I called HP support....they told me I needed their brand of recovery discs because the motherboard or BIOS wouldn't allow me to install Windows 7 on the new replacement HD w/o it being their (HP) discs. So I ordered them...$17
I bought another new HD and tried to install Windows 7 OS with the HP recovery discs. This time got Error Code 0xe0ef000e.
I should mention both times trying to install OS on new replacement HD...it got approx 8 to 12 minutes into installation before getting error messages.
I called HP support....this time was told that the retail version of Windows 7 OS should have worked and that I didn't need the HP brand recovery discs when installing new replacement HD. They offered me to pay $199 and send them my desktop to fix it....all inclusive fix.
Very confused. I have never encountered anything like this before...I've had mulitple hard drives die over the years and have replaced them myself and installed all the software including OS myself w/o any problems like this.
Memory checked out ok when utilizing the diagnostics f9 key .... it did show problems with HD during one of my many diagnostic attempts
Not sure if its a bad motherboard or built in video card ..... not sure how to find out either....since I can't get the PC up and running
It will boot to blue HP screen & most of time won't allow me to get into f10, f9 or esc screens.
Not sure if its worth paying $200 to fix this or go and buy a new one for around the same price.
any suggestions or help is appreciated
thanks
This question was solved.
View Solution.1) A retail OS should have worked. That particular motherboard's NVidia Sata controller chip had a bad batch. You need to make sure the hard drive is recognized in the BIOS. If not, nothing can be done.
2) Their brand of recovery disks was wrong, and was acknowledged. What about your $17 ??
If you had either a retail OS, or the recovery Disks that you made, these are acceptable.
The HP version when used with a new hard drive require conditioning "CyberLink Recovery Discs utility resolves an issue where Recovery Discs sent from HP do not work on a new hard drive".
Here's the list:
FAILED series computer with M2N78LA boards
That series motherboard was installed in many different models of HP computers. It is fraught with problems.
http://h30434.www3.hp.com/t5/Desktop-Hardware/m8530f-desktop-PC-with-a-m2n78-la-mother-board-doesn-....
Here are the reported models with M2N78LA boards that have failed. This is not the complete list.
a4316f
e9140f
p5210y
p6130y
p6142p
p6157c
p6210f (Voilet)
p6210y
p6214c
p6310y
p6320y
a6720y
m8530f
m9120y
m9350f
m9517c
m9530f
m9840sc
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus -
I Get a panic we are hanging error when trying to install the os on a new hard drive on a G5
Yes, the hard drive needs to be formatted and OS X must then be installed.
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit Disk Utility and return to the installer. Proceed with the OS X installation.
It's only a lost cause when nothing else works. -
Windows XP Pro doesn't recognize new hard drive on T61 thnkpad
Hard drive: 160GB 7200 RPM SATA
The Lenovo part number for the new hard drive on my invoice is: 41N5737
However, the sticker on the hard drive itself has this Lenovo part number: 42T1057
It is made by Hitachi.
Thinkpad: T61 (8891-CTO)
OS: Windows XP Pro SP2 (newly purchased, shrink-wrapped)
This thinkpad had Vista Home on it. I bought the new hard drive for the purpose of loading a just-purchased copy of Windows XP Pro SP2 on it (. After installing the new hard drive:
1. I turned on the machne and inserted the Windows XP CD.
2. Files from the CD (drivers, etc.) started being loaded (into memory, I guess).
3. Then got a prompt to select whether I'd like to install a new version of XP or restore an existing version.
4. I selected Install a new version.
5. Then I got a message saying Windows could not find a hard drive on my machine.
6. Then I restarted, and interrupted the restart to look at the BIOS config settings
7. I found the hard drive test function, and started the hard drive test.
8. It took a while, but the hard drive test was successful. So hard drive is OK, and the BIOS is aware of it.
How can I make Windows XP aware of my new hard drive?
Thanks for any help....
Solved!
Go to Solution.Tdc3, welcome to the forum,
change the BIOS settings in Config > SATA to Compatibility Mode from AHCI.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Maybe you are looking for
-
i have a slow macbook, i ran live disk utilities (from hard drive), turned out I needed to repair disk from a installation disk. Did that, I got the volume (Hard drive) repaired from the installation disk disk. To this point, great! When I reboot fro
-
Hi, I had a condition like test -table code - column t --> True f --> False I had two choices of writing query select decode(code,'t','True','False') from test; or select case code when 't' then 'True' else 'False' end from test; I want to know which
-
IWork-pages and Prepress PDF files
I work in the prepress end of printing monthly magazines. When printing to 4 color presses the layouts need to follow the press quality standards. When make a PDF file from a page layout app it needs to follow PDF/X-1a standards. This means when plac
-
Unable to define RETURN REASONS in CREDIT_MEMO_REASON in Receivables Lookup
Hello All, I am unable to define RETURN REASONS in CREDIT_MEMO_REASON in Receivables Lookup for RMA in 12.0.6 version. How to define. The moment i click the line level the add button gets disable. Please help me regarding this. It is urgent. Thanks i
-
Create a workflow on automator. Download attachments from email and import to iphoto
I would like to create a workflow on automator to do the following task: save email attachments (photos) from an specific inbox to downloads, for example, and then, import to iphoto. I would like to do this on automator rather than applescript. I hav