Loading with the spinning wheel.

Hello all. I made the update to my iphone last evening as I just got it a week ago so I am on the most current software. I am noticing a couple of things i would like your help with. First i have 3 bars of 3g service and safari seems to take forever to load certain websites. Second I downloaded a free app called sportstap. I get the spinning wheel there also and it never loads. Third and hopefully the last I have gmail set up on my phone for my email and it says connecting and the wheel just spins and spins and never gets my email. Any thoughts or suggestions would be great.
Thanks

The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup

Similar Messages

I updated Efi firmware, but force quit twitter to install. Now system won't come on, it just shows grey screen with the spinning wheel loading. I am running lion 10.7.3

I updated Efi firmware, but force quit twitter to install. Now system won't come on, it just shows grey screen with the spinning wheel loading. I am running lion 10.7.3.
Thank you

The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup

My MacBook pro will not load past the grey screen with the spinning wheel. What do I do?

My MacBook will not load past the grey screen with the spinning wheel of death. Anyone have any solutions?

Invoke Safe Mode by holding down the shift Key as you restart. This will do a Disk Utility "Repair Disk" as it starts up (so it takes a few minutes longer) and then load with minimal extensions loaded, and request your login username and password, even if you normally do not use them to log in.
Safe Mode runs the screen using simple, unaccelerated commands. Most things are available in Safe Mode, but things that rely on extensions will not be.
Acomputer that works in Safe Mode, but fails again after you restart, often implicates your extensions and add-ons.

Mac Book Pro on boot up, the apple sign will appear with the spinning wheel. After some time, a grey screen wil appear with a movable mouse, but will not boot up. Help!

Mac Book Pro on boot up, the apple sign will appear with the spinning wheel. After a period of time the screen will turn grey, but the mouse will still operate, but not boot up.

If it was purchased brand new then it's running a version of Lion, so to reinstall Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.

I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands

I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .

You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them.

FCP X is loading and loading with the colour wheel revolving for ever for the past few days.

FCP X is loading and loading with the colour wheel revolving for ever, for the past few days.
FCP X was working fine in my new 15" Mac book pro (Retina display with Mountain Lion 10.8.2) for the past one month. Now a days, each time I try to open the FCP X, the same non-stop colour wheel is rotating, trying to restore one of my project. It continues even for hours together. Finally I am force quiting the application.
How do I come out of it ? Will I be able to recover my project. I didn't do any backup in particular.
Is backing up on the regular basis is required?
I tried the following guidance by Apple,
In the Finder, hold down the Option key and choose Library from the Go menu.
In the Library folder that opens, go to Application Support/Final Cut Pro.
Drag the Layouts folder from the Final Cut Pro folder to the Trash.
Still my problem is continued
Help me

This is my pet checklist for questions regarding FCP X performance - you may have already addressed some of the items but it's worth checking.
Make sure you're using the latest version of the application - FCP X 10.0.5 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.5.
First, check that you have at least 20% free space on your system drive.
For smooth playback without dropping frames, make sure 'Better Performance' is selected in the FCP X Preferences - Playback Tab.
If you have not already done so, move your Projects and Events to a fast (Firewire 800 or faster) external HD. Make sure the drive's formatted OS Extended (journalling's not required for video). You should always keep at least 20% free space on the Hard Drives that your Media, Projects and Events are on.
Check the spec of your Mac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Check the spec of your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install of the OS would be recommended.
Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
If your playback in FCP X is not good, I strongly recommend you use ProRes 422 Proxy - it edits and plays back like silk because the files are small but lightly compressed (not much packing and unpacking to do) - but remember to select 'Original or Optimised Media' (FCP X Preferences > Playback) just before you export your movie, otherwise it will be exported at low resolution.
The downside of 'Proxy' is that it looks awful. DON'T use Proxy when you're assessing things like video quality - especially focus.
If you have plenty of processor power, for the ultimate editing experience, create Optimised Media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
Personally, I work with XDCAM EX and h.264 from a Canon DSLR. Both of these run fine with my system, but I do transcode multicam clips.
Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot. There's a great application for this, called Event Manager X - for the tiny cost it's an invaluable application.
http://assistedediting.intelligentassistance.com/EventManagerX/
Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
If none of this helps, you might have incompatible or corrupt media or project files. Move ALL your Events and Projects to temporary folders so that FCP X doesn't find them on launch. If it launches OK, re-introduce the Events and Projects one at a time, re-launching each time, so that you can track down the corrupt or incompatible files.
Andy

My iMac is stuck on the desktop with the spinning wheel

Please help...my iMac is stuck on the desktop with the spinning wheel.

Press Command-Option-Esc, then select the unresponsive app from the Force Quit window that appears, and click Force Quit.

My Imovie app is stuck in loading mode with the spinning wheel

I put a slide show onto my Imovie Application and now when I pull up that app it comes up with the slide show it gets stuck in the spinning wheel loading mode.

If you want to start the Restore Process over then follow these simple steps. Restart computer. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click Restore button of iTunes.

My MacBook pro won't turn on all the way gets to the apple with the spinning wheel underneath and that's all I need help asap

My MacBook pro won't turn on it just gets 2 the spinning wheel and keeps spinning

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If this doesn't work then you will need to erase the drive and install Snow Leopard from scratch:
Erase and Install Snow Leopard
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. When completed quit DU and complete the Snow Leopard installation.

How do i get my macbook pro to surpass the spinning wheel of death, once i turn it on, it stays on that screen with the spinning wheel of death

Everytime i turn my computer on it stays stuck on the apple with the spinning wheel

You likely have a failing drive or some sort of network issue that's delaying the operating system so it's showing the spinning beach ball while it waits.
It's likely a very serious problem you will need to address.
1: Determine your users files if they are backed up off the machine or not as those are not replaceable, OS X and programs are.
This is your options if the machine or drive is dead.
My computer is not working, is my personal data lost?
This is your possible recovery option
.Create a data recovery/undelete external boot drive
2: Hold the Shift key down on a wired or built in keyboard for Safe Mode, this disables some things hopefully to get you in and do manual backups to a external storage drive (do not use or only trust TimeMachine as it has been known to restore corrupted data or not at all)
Most commonly used backup methods
3: Once your data is off the boot drive you can run through the Steps to determine if it's a hardware issue (Hardware Test, Disk Utiltiy check), then run through possible software issues. Or if it's a network issue.
..Step by Step to fix your Mac
Diagnosing network issues
4: Sometimes a almost 100% filled boot drive will cause the issues your seeing as the computer is trying to find space for swap memory and can't locate anymore.
This can assist if you can get into the machine to see what your drive space or other slowdown issues, then off load large files like Movies or Pictures to a external drive and reboot.
Why is my computer slow?
5: If it's a hardware issue then you can have the drive replaced (if it's that) or take it into Apple for a free evaluation.
Install/upgrade RAM or storage drive in Mac's
If you need more assistant see if any of these tips can assist.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

My MacBook Pro will not start up. I only get a grey screen with the spinning wheel. No blue page appears and the grey screen remains. Tried starting with the Shift key but ineffective as well.

Can't get my MacBook Pro to start up. Have shut it down several times and tried restarting but all I get is a grey screen with the spinning icon. Apple Support online suggested starting with power button followed immediately with the shift key. Same results. Also tried power button with shift key, command, and V. Black screen appeared instead with lots of data language but still no starting. This final page was suppose to result in an internal system check and restart but nothing happened and the black screen remains.Where do I go from here? Scheduled for the Genius Bar tomorrow but would like to resolve this beforehand.

You may be having a hardware problem that you cannot resolve on your own. Nevertheless...
...hold down the command and R keys whilst booting to try to get to your Recovery partition. If you can, use Disk Utility to try to Verify your boot drive (usually named "Macintosh HD" unless you've renamed it). If the verification fails, try to repair your hard drive. If everything appears to be OK, restart.
If you can't get into your Recovery partition, your problem is likely hardware related. If so, keep your appointment and see what the Apple techs have to say.
Clinton

I'm having trouble with the spinning wheel

What causes the spinning wheel? And how do I fix it? Should I be running a maintenance procedure periodically? And if so, how is that done? As you can tell, I am pretty computer illiterate. I am running Safari 5.1.10 as my browser.

Useful article here on the causes of the Spinning Beach Ball and how to troubleshoot it:
http://www.computerworld.com/s/article/9177479/Troubleshoot_the_spinning_beach_b all?taxonomyId=89&pageNumber=1
and also this:
http://www.thexlab.com/faqs/sbbod.html

HELP Word crashed with the spinning wheel, i need the Doc , HELP!!!!!

My wife was working on a word document and i got the spinning wheel when she tried to do a spell check. I can't quit word as my wife need the document for her college course and she didn't save it, before she did tyhe spell check. Would it had been stored as a temp file that i can recover in some form. Word is still open ad i will keep the mac power up, until i find and answer or my wife through my mac through the window.Please Please Help as my wife is frantic.!!!!!

Get thee to the Microsoft Word for Mac forum found here <http://groups.google.com/group/microsoft.public.mac.office.word>. You'll find several experts there who may be able to assist you. Also have a look at this resource put together by some of those experts <http://word.mvps.org/mac/>.
Word for Mac is a Microsoft product, not an Apple product. You'll find more answers there than you will find here in a forum dedicated to Mac and Windows compatibility. Be sure to search the forum first. You may find that someone else has asked a similar question and that it has already been answered. You'll hopefully get your answer faster this way.
Good luck! bill
1 GHz Powerbook G4 Mac OS X (10.4.8)

Safari - Slow loading and the spinning wheel of death!

it seens that every page i surf to i get the spinning wheel of death . i have to wait and wait and wait, you get the picture. this happens on just about every page i go to, more on the pages that have forms to fill out.
I have read on another post that clearing the cache may help. NOT! and that trashing the favicons folder will help. Where is the favicons? also that restetting the application will solve all my problems. This is not internet exploader. this is suppossed to be apple. rock solid and all that crap.

Hi Darryl S,
* You will find the Favicons in:
HD/User/Your_Name/Home/Library/Safari/Icon Folder
* Quit Safari an trash the whole folder, when you relaunch Safari again, a NEW Icon Folder will be regenerated.
* Now go back to the Icon Folder in Safari an only select the Folder once, no get info by pressing the Command-i key. Set the Icon Folder to ONLY READ this prevents that the Favicons will be stored.
Also:
1. Empty your cache & History settings via the Safari menu
2. Shut down your computer . . . unplug the computer, modem, and router, if you have one. Also the power to support the modem. Let everything sit for 2-3 minutes. Plug everything back in, start up your modem & router, then restart your computer.
* Good luck ...
Dimaxum

I'm having issues booting up my MacBook Pro. When I turn it on, I get the sound and the apple logo with the spinning wheel, then a loading bar appears, then after about 30 seconds it shuts off. Suggestions?

I believe it's OSX 10.7.5 or .4, can't check now. I'm not able to boot up past the login screen. A bar comes up below the apple logo as if it's installing an apple update, but doesn't make any progress. Eventually, the bar goes away and just the apple logo and spinning wheel are there, then it just shuts off soon after. I've tried holding shift key on power up to enter safe mode, but nothing happens. Any help/ suggestions would be greatly appreciated. Thanks!

You can't backup without booting the computer unless you remove the drive. But it may be you have a more serious hardware problem, so I think you may be better off taking it in for service.
But here's what you might try since you now have an external drive.
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your drive's main entry (topmost one) and click on the First Aid tab, then click on the Repair Disk button. This will fix the boot block if it's damaged. Next, select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button.
If you have no problems with the above, then quit DU and return to the Main Menu. Select Restart from the Apple menu. See if the computer will boot properly.
If you get this far you should backup the drive ASAP. You will need to prepare your external drive:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Loading with the spinning wheel.

Similar Messages

Maybe you are looking for