Loadmovie causing weird errors

hey all,
i'm using loadmovie("filepath", location) to call movies into
common loading clip for a site i'm building but i'm noticing a
weird error. if a clip is loading, and then another clip is loaded
in its place, the new movie doesn't play properly and completely
bugs out. it's like it can't get past the first 1 or 2 frames and
plays in a loop. also, i can't load any other clips after that as
they all bug out in the same fashion.
any ideas why this is happening?

Hi, I think now u need to reset your router. To Reset your Router hold the reset button on the back of your router for 30 sec and after 30sec unplug the power and Replug the power and release the Reset Button, and after that try accessing the router setup.

Similar Messages

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Weird error message using phone as iPod

When I plug my iPhone into my car's iPod connection cord (which works fine with regular iPods and does not cause regular iPods to display any weird error messages), the iPhone says something about how "...that accessory does not work with the iPhone..." and asks me whether I want to switch to airplane mode. In spite of this weird message, I am able to play my music via the usual method in my car. Weird. Remedy?

Actually Human,
Many iPod accesories were not designed to operate in close proximity to a GSM phone. The iPhone is a GSM phone. There is a program for iPod accessory manufacturers to test and certify their accesories for use with the iPhone. This article contains more information:
http://docs.info.apple.com/article.html?artnum=305766
That being said, many will work without going into airplane mode, some will get interference from the GSM signal that will come through as a hum or sometimes popping noise. Since sending and receiving the GSM signal is needed to make calls, the iPhone can't be shielded to prevent interfering, the accessory needs to be.
This article contains more information on potential interference:
http://docs.info.apple.com/article.html?artnum=305662
The short answer is the car adapter may work without going into Airplane Mode, or it may have interference from the GSM signal at times.
Hope this helps,
Nathan C.

Getting this weird error

# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d03b7cd, pid=2752, tid=2804
# Java VM: Java HotSpot(TM) Client VM (11.0-b12 mixed mode, sharing windows-x86)
# Problematic frame:
# C [awt.dll+0x3b7cd]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x02ee4400): JavaThread "AWT-Windows" daemon [_thread_in_native, id=2804, stack(0x03220000,0x03270000)]
siginfo: ExceptionCode=0xc0000005, writing address 0xe1fe8c80
Registers:
EAX=0x17e4d6c4, EBX=0x00000bf4, ECX=0x00000100, EDX=0xe1fe8c80
ESP=0x0326f3a4, EBP=0x00000400, ESI=0x17e4d6c4, EDI=0xe1fe8c80
EIP=0x6d03b7cd, EFLAGS=0x00010206
Top of Stack: (sp=0x0326f3a4)
0x0326f3a4: 0326f47c 00000100 0326f484 00000100
0x0326f3b4: 6d0a462a 00000400 00000400 00000100
0x0326f3c4: 00000100 0326f600 0326f400 00000000
0x0326f3d4: 00000000 00000100 02be8828 00000100
0x0326f3e4: 00000400 e1fe8c80 0010e4c0 00000000
0x0326f3f4: 00000000 00000100 00000100 00000000
0x0326f404: 00000000 00000100 00000100 00000000
0x0326f414: 00000000 00000004 00000400 00000000
Instructions: (pc=0x6d03b7cd)
0x6d03b7bd: 00 00 00 8b 4c 24 14 8b e9 c1 e9 02 8b f0 8b fa
0x6d03b7cd: f3 a5 8b cd 83 e1 03 f3 a4 8b 74 24 18 8b 4c 24
Stack: [0x03220000,0x03270000], sp=0x0326f3a4, free space=316k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [awt.dll+0x3b7cd]
[error occurred during error reporting (printing native stack), id 0xc0000005]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j sun.awt.windows.WToolkit.eventLoop()V+0
j sun.awt.windows.WToolkit.run()V+69
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x02f00400 JavaThread "Thread-6" daemon [_thread_blocked, id=4036, stack(0x04050000,0x040a0000)]
0x02fd5c00 JavaThread "Thread-5" daemon [_thread_blocked, id=3692, stack(0x03990000,0x039e0000)]
0x02fe7c00 JavaThread "Thread-4" daemon [_thread_in_native, id=2840, stack(0x03940000,0x03990000)]
0x02fcb000 JavaThread "Thread-3" daemon [_thread_blocked, id=2820, stack(0x038f0000,0x03940000)]
0x02fa8000 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=2000, stack(0x03870000,0x038c0000)]
0x00396400 JavaThread "DestroyJavaVM" [_thread_blocked, id=2360, stack(0x003b0000,0x00400000)]
0x02f6d800 JavaThread "TimerQueue" daemon [_thread_blocked, id=2228, stack(0x03670000,0x036c0000)]
0x02f6ac00 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=580, stack(0x03620000,0x03670000)]
=>0x02ee4400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=2804, stack(0x03220000,0x03270000)]
0x02ec7000 JavaThread "AWT-Shutdown" [_thread_blocked, id=3564, stack(0x031d0000,0x03220000)]
0x02e94000 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1264, stack(0x03180000,0x031d0000)]
0x02e9e400 JavaThread "EventQueue" daemon [_thread_blocked, id=728, stack(0x030e0000,0x03130000)]
0x02b21400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2384, stack(0x02dd0000,0x02e20000)]
0x02b1b000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=1532, stack(0x02d80000,0x02dd0000)]
0x02b19800 JavaThread "Attach Listener" daemon [_thread_blocked, id=3844, stack(0x02d30000,0x02d80000)]
0x02b18400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3968, stack(0x02ce0000,0x02d30000)]
0x02b13400 JavaThread "Finalizer" daemon [_thread_blocked, id=2356, stack(0x02c90000,0x02ce0000)]
0x02b0ec00 JavaThread "Reference Handler" daemon [_thread_blocked, id=2644, stack(0x02c40000,0x02c90000)]
Other Threads:
0x02b0d000 VMThread [stack: 0x02bf0000,0x02c40000] [id=1772]
0x02b23400 WatcherThread [stack: 0x02e20000,0x02e70000] [id=2316]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 960K, used 761K [0x16960000, 0x16a60000, 0x17d10000)
eden space 896K, 77% used [0x16960000, 0x16a0e630, 0x16a40000)
from space 64K, 99% used [0x16a40000, 0x16a4fff8, 0x16a50000)
to space 64K, 0% used [0x16a50000, 0x16a50000, 0x16a60000)
tenured generation total 11972K, used 8697K [0x17d10000, 0x188c1000, 0x26960000)
the space 11972K, 72% used [0x17d10000, 0x1858e578, 0x1858e600, 0x188c1000)
compacting perm gen total 12288K, used 5163K [0x26960000, 0x27560000, 0x2a960000)
the space 12288K, 42% used [0x26960000, 0x26e6afd8, 0x26e6b000, 0x27560000)
ro space 8192K, 63% used [0x2a960000, 0x2ae6bdf8, 0x2ae6be00, 0x2b160000)
rw space 12288K, 52% used [0x2b160000, 0x2b7ba3c8, 0x2b7ba400, 0x2bd60000)
Dynamic libraries:
0x00400000 - 0x00424000      C:\WINDOWS\system32\javaw.exe
0x7c900000 - 0x7c9b5000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c900000      C:\WINDOWS\system32\kernel32.dll
0x77f40000 - 0x77feb000      C:\WINDOWS\system32\ADVAPI32.dll
0x77da0000 - 0x77e32000      C:\WINDOWS\system32\RPCRT4.dll
0x77f10000 - 0x77f21000      C:\WINDOWS\system32\Secur32.dll
0x7e390000 - 0x7e421000      C:\WINDOWS\system32\USER32.dll
0x77e40000 - 0x77e89000      C:\WINDOWS\system32\GDI32.dll
0x76330000 - 0x7634d000      C:\WINDOWS\system32\IMM32.DLL
0x7c340000 - 0x7c396000      C:\Program Files\Java\jre6\bin\msvcr71.dll
0x6d800000 - 0x6da56000      C:\Program Files\Java\jre6\bin\client\jvm.dll
0x76af0000 - 0x76b1e000      C:\WINDOWS\system32\WINMM.dll
0x6d280000 - 0x6d288000      C:\Program Files\Java\jre6\bin\hpi.dll
0x76bb0000 - 0x76bbb000      C:\WINDOWS\system32\PSAPI.DLL
0x6d7b0000 - 0x6d7bc000      C:\Program Files\Java\jre6\bin\verify.dll
0x6d320000 - 0x6d33f000      C:\Program Files\Java\jre6\bin\java.dll
0x6d7f0000 - 0x6d7ff000      C:\Program Files\Java\jre6\bin\zip.dll
0x6d000000 - 0x6d136000      C:\Program Files\Java\jre6\bin\awt.dll
0x72f70000 - 0x72f96000      C:\WINDOWS\system32\WINSPOOL.DRV
0x77be0000 - 0x77c38000      C:\WINDOWS\system32\msvcrt.dll
0x774a0000 - 0x775dd000      C:\WINDOWS\system32\ole32.dll
0x5b190000 - 0x5b1c8000      C:\WINDOWS\system32\uxtheme.dll
0x6d220000 - 0x6d274000      C:\Program Files\Java\jre6\bin\fontmanager.dll
0x10000000 - 0x10171000      C:\WINDOWS\system32\nview.dll
0x77e90000 - 0x77f06000      C:\WINDOWS\system32\SHLWAPI.dll
0x7c9c0000 - 0x7d1e2000      C:\WINDOWS\system32\SHELL32.dll
0x770e0000 - 0x7716b000      C:\WINDOWS\system32\OLEAUT32.dll
0x5d4e0000 - 0x5d57a000      C:\WINDOWS\system32\COMCTL32.dll
0x77bd0000 - 0x77bd8000      C:\WINDOWS\system32\VERSION.dll
0x77390000 - 0x77493000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\comctl32.dll
0x77650000 - 0x77671000      C:\WINDOWS\system32\NTMARTA.DLL
0x71b80000 - 0x71b93000      C:\WINDOWS\system32\SAMLIB.dll
0x76f20000 - 0x76f4d000      C:\WINDOWS\system32\WLDAP32.dll
0x03380000 - 0x033ce000      C:\WINDOWS\system32\NVWRSNL.DLL
0x746a0000 - 0x746ec000      C:\WINDOWS\system32\MSCTF.dll
0x03410000 - 0x0346d000      C:\Program Files\Actual Window Minimizer\awmemb.dll
0x75250000 - 0x7527e000      C:\WINDOWS\system32\msctfime.ime
0x4fd10000 - 0x4feb6000      C:\WINDOWS\system32\d3d9.dll
0x6deb0000 - 0x6deb6000      C:\WINDOWS\system32\d3d8thk.dll
0x6d610000 - 0x6d623000      C:\Program Files\Java\jre6\bin\net.dll
0x71a30000 - 0x71a47000      C:\WINDOWS\system32\WS2_32.dll
0x71a20000 - 0x71a28000      C:\WINDOWS\system32\WS2HELP.dll
0x6d630000 - 0x6d639000      C:\Program Files\Java\jre6\bin\nio.dll
0x036d0000 - 0x036e5000      C:\WINDOWS\system32\nvwddi.dll
0x719d0000 - 0x71a10000      C:\WINDOWS\System32\mswsock.dll
0x76ee0000 - 0x76f07000      C:\WINDOWS\system32\DNSAPI.dll
0x76f70000 - 0x76f78000      C:\WINDOWS\System32\winrnr.dll
0x16080000 - 0x160a5000      C:\Program Files\Bonjour\mdnsNSP.dll
0x76d20000 - 0x76d39000      C:\WINDOWS\system32\Iphlpapi.dll
0x76f80000 - 0x76f86000      C:\WINDOWS\system32\rasadhlp.dll
0x61200000 - 0x61259000      C:\WINDOWS\system32\hnetcfg.dll
0x71a10000 - 0x71a18000      C:\WINDOWS\System32\wshtcpip.dll
VM Arguments:
jvm_args: -Xmx256m
java_command: com.speljohan.rsbot.Application GUIController nonmembers
Launcher Type: SUN_STANDARD
Environment Variables:
CLASSPATH=.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\TortoiseSVN\bin;C:\Program Files\QuickTime\QTSystem\
USERNAME=gavin van der star
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 6 Stepping 4, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 2 (2 cores per cpu, 1 threads per core) family 15 model 6 stepping 4, cmov, cx8, fxsr, mmx, sse, sse2, sse3
Memory: 4k page, physical 2095532k(1209308k free), swap 4032792k(3244508k free)
vm_info: Java HotSpot(TM) Client VM (11.0-b12) for windows-x86 JRE (1.6.0_10-beta-b25), built on May 29 2008 00:51:46 by "java_re" with MS VC++ 7.1
time: Thu Nov 20 17:54:40 2008
elapsed time: 9 seconds

prakashdewangan wrote:
This is not a weird error... This is Java HotSpot... It comes when java is unable to continue run and it has to Exit. Like in windows you would have seen error box when program terminates.
The posted trace is from a windows box.
Java HotSpot generely I have seen because of Too High CPU usage (and memory too). Java does not get enough resource to run... Please check your code where is the Loop which needs high resource... try to refactor that code...No.
Standard general causes of this.
- Use of JNI or a third party library that uses JNI
- A combination of video drivers, video card and fonts. This one is less prevalent than it used to be.
- Bad environment, memory, installs, programs, etc.
- Bug in the VM.
Presuming in your reported case that none of the other causes applied then you found a bug in the VM. That doesn't mean that anyone else found the same one.

X11vnc gives weird errors

Hi,
I've been trying to get x11vnc working on my other box but if I start it I get weird errors, and I can't find anything on google about this, as many other things are causing these kinds of errors, while no results turn up if I add x11vnc to the search parameters...
Here's the output:
[medja@myhost ~]$ x11vnc -rfbauth -display :0
14/02/2008 16:50:06 passing arg to libvncserver: -rfbauth
14/02/2008 16:50:06 x11vnc version: 0.9.4 lastmod: 2007-12-21
14/02/2008 16:50:06 Using X display :0
14/02/2008 16:50:06
14/02/2008 16:50:06 ------------------ USEFUL INFORMATION ------------------
14/02/2008 16:50:07 X DAMAGE available on display, using it for polling hints.
14/02/2008 16:50:07 To disable this behavior use: '-noxdamage'
14/02/2008 16:50:07
14/02/2008 16:50:07 Wireframing: -wireframe mode is in effect for window moves.
14/02/2008 16:50:07 If this yields undesired behavior (poor response, painting
14/02/2008 16:50:07 errors, etc) it may be disabled:
14/02/2008 16:50:07 - use '-nowf' to disable wireframing completely.
14/02/2008 16:50:07 - use '-nowcr' to disable the Copy Rectangle after the
14/02/2008 16:50:07 moved window is released in the new position.
14/02/2008 16:50:07 Also see the -help entry for tuning parameters.
14/02/2008 16:50:07 You can press 3 Alt_L's (Left "Alt" key) in a row to
14/02/2008 16:50:07 repaint the screen, also see the -fixscreen option for
14/02/2008 16:50:07 periodic repaints.
14/02/2008 16:50:07
14/02/2008 16:50:07 XFIXES available on display, resetting cursor mode
14/02/2008 16:50:07 to: '-cursor most'.
14/02/2008 16:50:07 to disable this behavior use: '-cursor arrow'
14/02/2008 16:50:07 or '-noxfixes'.
14/02/2008 16:50:07 using XFIXES for cursor drawing.
14/02/2008 16:50:07 GrabServer control via XTEST.
14/02/2008 16:50:07
14/02/2008 16:50:07 Scroll Detection: -scrollcopyrect mode is in effect to
14/02/2008 16:50:07 use RECORD extension to try to detect scrolling windows
14/02/2008 16:50:07 (induced by either user keystroke or mouse input).
14/02/2008 16:50:07 If this yields undesired behavior (poor response, painting
14/02/2008 16:50:07 errors, etc) it may be disabled via: '-noscr'
14/02/2008 16:50:07 Also see the -help entry for tuning parameters.
14/02/2008 16:50:07 You can press 3 Alt_L's (Left "Alt" key) in a row to
14/02/2008 16:50:07 repaint the screen, also see the -fixscreen option for
14/02/2008 16:50:07 periodic repaints.
14/02/2008 16:50:07
14/02/2008 16:50:07 XKEYBOARD: number of keysyms per keycode 6 is greater
14/02/2008 16:50:07 than 4 and 91 keysyms are mapped above 4.
14/02/2008 16:50:07 Automatically switching to -xkb mode.
14/02/2008 16:50:07 If this makes the key mapping worse you can
14/02/2008 16:50:07 disable it with the "-noxkb" option.
14/02/2008 16:50:07 Also, remember "-remap DEAD" for accenting characters.
14/02/2008 16:50:07 X FBPM extension not supported.
14/02/2008 16:50:07 X display is capable of DPMS.
14/02/2008 16:50:07 --------------------------------------------------------
14/02/2008 16:50:07
14/02/2008 16:50:07 Default visual ID: 0x21
14/02/2008 16:50:07 Read initial data from X display into framebuffer.
14/02/2008 16:50:07 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/9856
14/02/2008 16:50:07 *** unrecognized option(s) ***
14/02/2008 16:50:07 [1] 20
14/02/2008 16:50:07 For a list of options run: x11vnc -opts
14/02/2008 16:50:07 or for the full help: x11vnc -help
14/02/2008 16:50:07
14/02/2008 16:50:07 Here is a list of removed or obsolete options:
14/02/2008 16:50:07
14/02/2008 16:50:07 removed: -hints, -nohints
14/02/2008 16:50:07 removed: -cursorposall
14/02/2008 16:50:07 removed: -nofilexfer, now the default.
14/02/2008 16:50:07
14/02/2008 16:50:07 renamed: -old_copytile, use -onetile
14/02/2008 16:50:07 renamed: -mouse, use -cursor
14/02/2008 16:50:07 renamed: -mouseX, use -cursor X
14/02/2008 16:50:07 renamed: -X, use -cursor X
14/02/2008 16:50:07 renamed: -nomouse, use -nocursor
14/02/2008 16:50:07 renamed: -old_pointer, use -pointer_mode 1
X Error of failed request: BadShmSeg (invalid shared segment parameter)
Major opcode of failed request: 148 (MIT-SHM)
Minor opcode of failed request: 2 (X_ShmDetach)
Segment id in failed request: 0x0
Serial number of failed request: 35
Current serial number in output stream: 39
[medja@myhost ~]$
vncserver (for virtual screens :1 and such) is working well btw and there is no firewall installed on that box. It's a twinview setup if that matters. I have no idea what's wrong...
Any idea?

To run x11vnc from ssh session you either have to "su" to root or run x11vnc from local console.
AFAIK shared memory access from different virtual terminal is disabled by default so you have to have root priviliges to access it.
Sorry this bit of necromancy, but i've searched the net about this problem and could't find any specific pointers so now hopefully google will find this solution

I am trying to install current Firefox 3.6, as I am currently running an older Firefox on my Windows ME, but I keep getting this error message: "Setup has caused an error in SETUP.EXE Setup will now close."--Please help?

I have downloaded all IP changer Privacy software I have purchased and am trying to install it, and although it is made to work with WindowsME that I am currently using on my computer, it now says it requires Firefox 3 or above to be able to install the software. Therefore, I am trying to update my Firefox to current 3.6 but once Firefox 3.6 downloads it doesn't install. Instead I just keep getting the same error message: Setup has caused an error in SETUP.EXE. Set up will now close. Several times, I have also tried restarting the computer as the error message also recommended But I just still keep getting the same error message when I try to update/install Firefox 3.5. Please help/advise on how I can fix this problem. Many thanks in advance!

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
[ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
http://sourceforge.net/projects/kernelex/

Weird Error!!cant figure it out

Good day ppl! i posted in the Vga section of this forum but noone seems to reply with a clear cut answer..someone said memtest and it reported no errors??pls read my post and give me a diagnosis!! ure help is very much appreciated!
i have a slight problem which i cant seem to find a solution to...
whenever i run games like Counterstrike 1.6 and Warcraft FT, a few mins in the game, i get a weird error which closes the application...the error is as follows:
Microsoft Visual C++ Runtime Library
Runtime Error !
Program D:\Valve\hl.exe
abnormal program termination
once this error shows, i have to click the OK button as nothin else can be clicked.on clicking another error appears....
CiceroUIWndFrame: hl.exe -Application Error
The instruction at "0x10232929" referenced memory at "0x10528688".The memory could not be read.
Click ok to terminate program..
I have to click ok and this terminates my game...becos of this problem i reinstalled my windows XP pro SP1 again and then reinstall my MSI gfx latest drivers again, then also reinstalled the games again.but it still keeps coming..PLS HELP ME!!!
any solution ppl...u all are geniuses as i have come to see and very helpful
MSI 875p Neo Fisr Bios 1.6
512 DDR 400 Twinmos Rams
MSI GF4 FX5600 VTD 128
i dont know but is this a problem with my vga card and if so how can it be solved..
ive run adware, spyware, antivirus, tuneup utilities 2003 to check for any possible errors or virus or worms or trojans but it all comes empty..i have pc-cillin 2003 also and ran a scandisk with no reported viruses..
my power supply is the Vantec ION 400 Wtt powersupply SATA ready..
3.3V 26A
5V 40A
12 16A
i have Twinmoss Pc3200 DDR 400 512 MB ram(single stick)--- no memory issue as of sort as i have more than 70% of it free whenver running windows and programs in the background...
i have 5 cooling fans including a Vantec Tornada( 3 intake and 2 exhaust) with 2 HDD( 80gb and 40gb barrcudas)
i hope this info will be good enuf for u ppl to diagnos my problem
again i thank u all for ure time

Agreed; Since the FX-5800 and up GPU's Require up to 7 Amps from the +12V Rail, then Yes 16 Amps is Very Light indeed , Dont Forget your P4 CPU under Stress (Gaming) Can require up to 10-11 Amps, combine that with the 7 Amps that your GPU May Require, and you are Over your +12V Rails Power capabilities...You should have at Least 20Amps on your +12V Rail, and because you are a Gamer! You should Have one of the Better PSU's Available that have 30 Amps + available on the +12V Rails. ie Enermax 465W or Antec 480W..............Sean REILLY875

A view, function and TO_DATE causing an error.

I have the following statement which calls a view, VW_DIST_RPT_WORK_LIST which in turn calls a function which returns either 'Null' or a date string e.g. '07 Oct 2003' as a VARCHAR2 (alias PROJECTED_DELIVERY_DATE).
Statement:
SELECT CUSTOMER_NAME, PROTOCOL_REFERENCE, SHIPPING_REFERENCE, CUSTOMER_REFERENCE, COUNTRY, PROJECTED_DELIVERY_DATE, STATUS, NOTES,
TO_DATE(PROJECTED_DELIVERY_DATE)
FROM VW_DIST_RPT_WORK_LIST
WHERE EXPECTED_DESP_DT IS NOT NULL
AND UPPER(PROJECTED_DELIVERY_DATE) NOT LIKE('NULL%')
AND EXPECTED_DESP_DT <= TO_DATE('07/10/2003', 'DD/MM/YYYY')
AND TO_DATE(PROJECTED_DELIVERY_DATE) <= TO_DATE('31/12/2003', 'DD/MM/YYYY') --< Problem here
I need to be able to specify a date filter on the PROJECTED_DELIVERY_DATE field and hence used the TO_DATE(PROJECTED_DELIVERY_DATE) <= TO_DATE('31/12/2003', 'DD/MM/YYYY') but this is generating an ORA-01858: a non-numeric character was found where a numeric character was expected.
I think the problem lies with the fact that this field can contain 'Null' which cannot be converted to a date using TO_DATE. I've tried adding a NOT LIKE ('NULL%') statement to catch any nulls which may be creeping in bu this doesn't solve the problem.
I've added TO_DATE(PROJECTED_DELIVERY_DATE) to the select above to determine if the nulls are being caught and if the TO_DATE in performing the conversion correctly which it is on both counts.
Any ideas anyone ?

The answer provided above by Monika will work for this situation. However, you should seriously think whether you should be using a string for date datatype. Ideally, you should rewrite the function that returns PROJECTED_DELIVERY_DATE and change the return type to DATE. The least you should do is to return NULL (instead of the string 'NULL') from the function. Oracle handles nulls perfectly, there is no reason you should write code to handle nulls;
One more thing. Looking at the type of error you are receiving, it seems that you are using rule based optimizer. Why do I think so? Because, in rule based optimizer, the conditions are evaluated in a specific order (viz, bottoms-up for AND clauses). To show this, look at the following simple demonstration. I did this in Oracle 8.1.6 (also in 9.2.0.4.0 on Windows).
-- Check the database version
select * from v$version;
BANNER
Oracle8i Enterprise Edition Release 8.1.6.1.0 - Production
PL/SQL Release 8.1.6.1.0 - Production
CORE 8.1.6.0.0 Production
TNS for Solaris: Version 8.1.6.0.0 - Production
NLSRTL Version 3.4.0.0.0 - Production
-- Create the test table
create table test (a number(2));
insert into test(a) values (0);
insert into test(a) values (1);
insert into test(a) values (2);
insert into test(a) values (3);
insert into test(a) values (4);
insert into test(a) values (5);
insert into test(a) values (6);
insert into test(a) values (7);
commit;
-- See that I have not analyzed the table. This will make use of RULE based optimizer
select * from test
where a > 0
and 1/a < .25;
and 1/a < .25
ERROR at line 3:
ORA-01476: divisor is equal to zero
-- Look at the query clause. Even though I specifically asked for records where a is positive
-- the evaluation path of rule based optimizer started at the bottom and as it evaluated the
-- first row with a=0, and caused an error.
-- Now look at the query below. I just re-arranged the conditions so that a > 0 is evaluated
-- first. As a result, the row with a=0 is ignored and the query executes without any problem.
select * from test
where 1/a < .25
and a > 0;
A
5
6
7
-- Now I analyze the table to create statistics. This will make the query use the
-- cost based optimizer (since optimizer goal is set to CHOOSE)
analyze table test compute statistics;
Table analyzed.
-- Now I issue the erring query. See it executes without any problem. This indicates that
-- the cost based optimizer was intelligent enough to evaluate the proper path instead of
-- looking only at the syntax.
select * from test
where a > 0
and 1/a < .25;
A
5
6
7
Does the above example seem familiar to your case? Even though you had the AND UPPER(PROJECTED_DELIVERY_DATE) NOT LIKE('NULL%') in your query, a record with PROJECTED_DELIVERY_DATE = 'NULL' was evaluated first and that caused the error.
Summary
1. Use dates for dates and strings for strings
2. Use cost based optimizer
Thanks
Suman

Using Site Content and Structure unable to move documents,pages and getting weird error message

Hi ,
earlier we are moving a page ,document from one site to another sub site with in the Site Collection.
Now,we are getting a un-readable format error.
After selecting the destination we are getting the error.
and the file can't move.
What might me be the error.
Expecting answers related to my question.
1.As we can do using Internet Explorer,
2. Using Send To also we can move.
Using this Site Content and structure we can maintain Versoining also.
If any one face the same issue then we can easily find out the solution.
Regards ,
Prathap
SP Developer
Specify the destination to move the items you selected.

Hi,
Using Site Content and Structure unable to move documents,pages and getting weird error message
We are getting Below error:
When Moving Document items from one site to another site in the same site collection using Site content and structure(But it's working in same site,we can move documents from one library to another library)
1576|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|cccccccccnncnnnnn|

Weird error message on Adobe Reader XI installation.

I've just downloaded Adobe Reader XI and started to instal it but get this weird error message: "The ordinal 459 could not be located in the dynamic link library urlmon.dll". What does this mean and what can I do about it?

Hi EbSax,
Please try out the suggestions mentioned here - http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/the-ordinal-459 -could-not-be-located-in-the/d93d1cdf-763b-4403-bcc8-ca06d16f4f4a
~Deepak

Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION

With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
Plug-ins that failed to load:
   DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION - - from the file “DigitalAIRProv2.plugin”Flash:
   Connections
   Kuler
This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
Reinstalling the plug-in did not make any difference. What can cause this error?

Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to.

DESADV01 E1EDP07 segment per line item causes EDIFACT error

When a Sales Order has the PO Number + Date populated, the subsequent outbound Delivery IDoc (DESADV01) contains a parent E1EDP07 segment for every child line item segment (E1EDP09). For a SO without PO Date, the IDoc is created with a single E1EDP07 with multiple child E1EDP09 segments. This is standard SAP - do you need to code around this?
The first scenario causes an error in EDIFACT mapping, as a limit of 9 RFF segments is allowed (E1EDP07 is a level 1 segment). Partner systems reject this.

Hi,
Segment field should be optional, so check the posting keys in OB41, check the GL account which hit this posting and check the FIeld status in OBC4 and make the segment field as optional.
while posting the transactions you can check in more then Profit center and segment details will be updated in the postings.
try out, this might help. check the new ledger document types also.
Regards,
Padma

Does anyone know what is causing this error please?

I recently ran sfc /scannow. It completed without giving me any notifications other than a number of:
"Files that are required for Windows to run properly must be copied to the DLL cache."
I was prompted to insert my XP SP3 installation CD and click on 'retry'.
The scan lasted for around 40 minutes then closed.......at no stage was I advised that it had been unsuccessful.
When I restarted my computer directly afterwards, half way through booting a 'please wait' appeared, as if something was taking place.
I thought all had gone well until I looked in Event Viewer later. There are approximately 90 Windows File Protection entries there mostly with the following information:
The system file ........ could not be copied into the DLL cache. The specific error code is 0x800b0100 [No signature was present in the subject]. This file is necessary to maintain system stability.
Does anyone know what causes that error and what I need to do to resolve it please?

Thank you very much for helping.
I have already tried to run the Microsoft Fix it from there for XP SP3, the os I have>>>>>>>"This troubleshooter does not apply to your system. We're sorry, but this troubleshooter is not compatible with your current system's configuration."
That was the only Microsoft information I could find on the specific error code I received: 0x800b0100......although the article applies to Microsoft Updates, I thought it might cover this too.
I have now run SFC three times, but errors still showed in Event Viewer.
I regularly run Chkdsk, last few times no errors.
I am actually having my computer checked for malware right now by specialist malware removers......all the malware scans I regularly run have given me the all clear for some time (McAfee Stinger, Hitman Pro, Malwarebytes - MBAM, TDSSKiller) but there has
been malware on my computer in the past, which was removed (not serious I was told).
In two of the scans the techs asked me to carry out there are
hundreds of dll cache entries under
Files/Folders - Created Within 30 Days on the date I run SFC.
I am waiting for this to be confirmed, but it looks to me as if SFC was actually successful to a large extent and the entries in Event Viewer are some failures (not all as I previously thought)?
I also have a serious problem in relation to Microsoft Updates (please see my other question).

[svn:fx-trunk] 11999: Fixed: ASC-3889 - Using setting in a for loop causes Verify error

Revision: 11999
Revision: 11999
Author:   [email protected]
Date:     2009-11-19 11:37:09 -0800 (Thu, 19 Nov 2009)
Log Message:
Fixed: ASC-3889 - Using setting in a for loop causes Verify error
Notes: emit pop after callstatic to a void function to balance the stack.
Reviewer: jodyer+
Testing: asc,tamarin,flex checkin tests
Ticket Links:
    http://bugs.adobe.com/jira/browse/ASC-3889
Modified Paths:
    flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/CodeGenerator.java

Blacklisting the ahci module does indeed get rid of the error. Would be nice to figure out why it was conflicting with the ahci module though.
I have not yet tried the 173xx drivers, but the latest drivers for the Quadro FX 580 are the 256.53 drivers according to nvidia.
Posted at the nV forums (http://www.nvnews.net/vbulletin/showthread.php?t=155282), so we'll see what they suggest.

[svn:fx-trunk] 11530: Fix ASC-3790 ( conditional expression in for loop causes verifier error) r=jodyer

Revision: 11530
Author:   [email protected]
Date:     2009-11-06 13:23:05 -0800 (Fri, 06 Nov 2009)
Log Message:
Fix ASC-3790 (conditional expression in for loop causes verifier error) r=jodyer
Ticket Links:
    http://bugs.adobe.com/jira/browse/ASC-3790
Modified Paths:
    flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/ConditionalExpressionNode.java

Loadmovie causing weird errors

Similar Messages

Maybe you are looking for