Loads of pics in gallery

Hi is there anyway i can tidy the gallery up on my n95 as i have tomtom installed with loads of points of interest and loads of photos on it all of which show up in gallery so lookin for something in 800 pictures takes ages is there a way i can stop some showing in gallery or sort them in to folders thanks Wayne

Hi zerocool567
Perhaps you should look at this post by dan955uk:
/discussions/board/message?board.id=smartphones&message.id=54403#M54403
Used this procedure myself to get rid of all TomTom Navigator thumbnails.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

In elements 12, when I click a photo in Window Explorer, it will load the elements 12 editor, but it doesn't load the pic ( *.jpg ) into the editor? It always did in earlier versations?

in elements 12, when I click a photo in Window Explorer, it will load the elements 12 editor, but it doesn't load the pic ( *.jpg ) into the editor? It always did in earlier versations?

green
When you click on the Playclaw's Encoder tab, what do you see in the next dialog for Video Compression when the Container field in that dialog is set to .avi?
Since you are seeing some video at all in Premiere Elements (glitchy as it is), I am assuming the video compression is not AVCHD. If that were the case, I would expect you not to be able to import the file at all. By any chance is the video compression Xvid or DivX?
It appears that Video compression could also be "H.264 Intel QuickSync" with a mkv file extension. That seems ruled out since you say your file extension is .avi and not mkv.
So, with the .avi file extension
what is listed as Video Compression and what have you done, if anything, under the Encoder Setup button?
Do you have the same issues with and without the antivirus and firewall(s) disabled?
Also, if you took footage that worked before in Premiere Elements back into today's Premiere Elements, problems or no problems?
At this time, can you import a bunch of jpg photos into a project and work without this type of issue?
Thanks.
ATR

Hi can anyone please help me! My I phone is in recovery mode i lost it and it was returned to me fully working. I ran an update and it shut down. I have loads of pics and vids of my little girls including my youngest counting to ten for the first time.

Hi can anyone please help. My I Phone is in recovery mode. I have loads of pics and vids including my little girl counting to ten for the first time.
Can I recover these files or have I lost them? I lost the phone last week and it was returned working but with an update to install I did this and it shut down.
If anyone can please help I would be eternally in your debt I have loads of sentimental pctures in here but cant get to them.

Sorry, but if it's in recovery mode, anything on the phone is already gone. If you had PhotoStream turned on, hopefully the photos will still be out there.
You have no choice at this point but to restore from your last backup.

Loading a pic from a Movie Clip

I currently have a site that loads pics by rolling over a
button. I would like to change the buttons to Movie Clips but still
be able to load the pics.
In the root of my Flash file I have this action script:
var myMCL:MovieClipLoader = new MovieClipLoader();
Then on each button I have this script which loads the pic
into an empty MovieClip called "container":
on (rollOver) {
myMCL.loadClip("images/image01.jpg", "container");
This script doesn't seem to work when I apply it to a
MovieClip that I want to fucntion like a button. I need it to be a
MovieClip because there is other stuff I want the MC to do that a
button can't do.
Any ideas?

I thought that might be the problem but I;m not sure where to
put "this._parent.container"
I tried this with no luck:
on (rollOver) {
myMCL.loadClip("images/image01.jpg",
"this._parent.container");

I loaded some pics from my SD card and then I loaded some from my iPhone. But I am unable to see the pics from my SDcard in iPhotos.

I loaded some pics from my SD card and then I loaded some from my iPhone. But I am unable to see the pics from my SDcard in iPhotos.

I think it is 7.1.1 - there was another update today which I've uploaded but it didn't make any difference. It's just the music libary on the 5 that's causing me problems.

How do i load selected pics from my mac to my ipod touch?, How do i load selected pics from my mac to my ipod touch?

How do i load selected pics from my Macpro to my ipod touch?

You really need to read the manual.
Open itunes, connect ipod, go to photos tab, select what you want, sync.
iPod touch User Guide (For iOS 5.0 Software)

On my iPhone 5, upon receiving a picture, when I touch the arrow to open it I just get a blank loading screen that never loads the pic! Didn't have this issue on my iPhone 4 running OS 6.

On my iPhone 5, upon receiving a picture, when I touch the arrow to open it I just get a blank loading screen that never loads the pic! Didn't have this issue on my iPhone 4 running OS 6. Is anyone else having this issue?

Thank You, thank You ...so much......that feature made me crazy!
Ocean20 wrote:
This can be turned off in settings/accessibility/zoom. Then on the next screen turn off

Clear loaded pictures in xml gallery to load another set

i cannot figure how to unload my already populated xml gallery, before loading new content :
here the functions i want :
//following 2 functions will be called by a button :
// removes previously placed objects
function clearLoadedPictures():void {
// Load another ,xml to load new pictures set - ok : works fine
function LoadNewPictures():void {
 i_g = 0;
 // xml data
 var xml_gallery:XML = new XML();
 var xml_gallery_List:XMLList = new XMLList;
 // XML data loader...
 var xmlUrlReq:URLRequest = new URLRequest("xml/gallery2.xml");// gallery2.xml will replace gallery.xml already loaded
 var xml_gallery_UrlLoader:URLLoader = new URLLoader(xmlUrlReq);
 xml_gallery_UrlLoader.addEventListener(Event.COMPLETE, xml_gallery_Complete);
 xml_gallery_UrlLoader.addEventListener(IOErrorEvent.IO_ERROR, xml_gallery_LoadFailed);
here the xml gallery code :
var _mc:item;
var total:int;
var i_g:int;
var id:int;
var btn_Gallery_Ready:Boolean;
var speedX:Number;
var spaceR:Number;
var img_gallery_Loader:Loader;
i_g = 0;
 // xml data
 var xml_gallery:XML = new XML();
 var xml_gallery_List:XMLList = new XMLList;
 // XML data loader...
 var xmlUrlReq:URLRequest = new URLRequest("xml/gallery.xml");
 var xml_gallery_UrlLoader:URLLoader = new URLLoader(xmlUrlReq);
 xml_gallery_UrlLoader.addEventListener(Event.COMPLETE, xml_gallery_Complete);
 xml_gallery_UrlLoader.addEventListener(IOErrorEvent.IO_ERROR, xml_gallery_LoadFailed);
 bottom24.gallery.content_mc.addEventListener(MouseEvent.ROLL_OVER, startScroll);
 bottom24.gallery.content_mc.addEventListener(MouseEvent.ROLL_OUT, stopScroll); //
// xmlComplete function
 function xml_gallery_Complete(e:Event):void
 xml_gallery = XML(e.target.data); //
 xml_gallery_List = xml_gallery.item; // <item> in gallery.xml
 total = xml_gallery_List.length();
 spaceR = xml_gallery.attribute("space"); // specified in gallery.xml file as is : <gallery space="119" speed="0.2">
 speedX = xml_gallery.attribute("speed");
 init_gallery();
 function xml_gallery_LoadFailed(e:IOErrorEvent):void {
 trace("Load Failed: " + e);
 function init_gallery() //
 //bottom.gallery.content_mc.itemHolder_mc.
 _mc = new item(); //
 _mc.alpha = 0;
 //_mc.imgMask_mc.scaleY = 0; // condition pour apparition des timbres ds la gallery - OLD
 _mc.imgMask_mc.alpha = 0; // condition pour apparition des timbres ds la gallery - NEW
 _mc.x = i_g * spaceR;
 _mc.btn.id = i_g;
 _mc.btn.mouseChildren = false;
 bottom24.gallery.content_mc.itemHolder_mc.addChild(_mc);
 Tweener.addTween(_mc, {alpha:1, time:0.8, transition:"easeOutExpo"});
 _mc.online_mc.alpha = 0; //invisible sans roll over
 if (xml_gallery_List[i_g].url != "")
 _mc.btn.buttonMode = true;
 _mc.online_mc.visible = true;
 btn_Gallery_Ready = true;
 else
 _mc.btn.buttonMode = false;
 _mc.online_mc.visible = false;
 btn_Gallery_Ready = false;
 var imgRequest:URLRequest = new URLRequest (xml_gallery_List[i_g].image); //
 img_gallery_Loader = new Loader(); // var imgLoader:Loader;
 img_gallery_Loader.load(imgRequest); //
 img_gallery_Loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, imgLoading);
 img_gallery_Loader.contentLoaderInfo.addEventListener(Event.COMPLETE, img_gallery_Complete);
 i_g++;
 function imgLoading(event:ProgressEvent):void // tiny preloader in bottom thumbs pics
 _mc.preloader_mc.width = Math.round(img_gallery_Loader.contentLoaderInfo.bytesLoaded / img_gallery_Loader.contentLoaderInfo.bytesTotal * 100);
 function img_gallery_Complete(event:Event):void
 _mc.imgHolder_mc.addChild(img_gallery_Loader);
 Tweener.addTween(_mc.imgHolder_mc, {_saturation:0.9, time:0.6});// desaturate scrolling thumbs
 //_mc.imgHolder_mc.alpha = 0.5; // test
 // apparition des timbres ds la gallery, ici fade in : - NEW
 Tweener.addTween(_mc.imgMask_mc, {"alpha":1, delay:i_g / 20, time:0.4, transition:"easeOutExpo"});// test
 // apparition des timbres ds la gallery, ici image apparait de haut en bas : - OLD
 //Tweener.addTween(_mc.imgMask_mc, {"scaleY":1, delay:i_g / 10, time:1, transition:"easeOutExpo"});
 // la ligne de preloader qui diminue vers la gauche :
 Tweener.addTween(_mc.preloader_mc, {"scaleX":0, delay:0, time:1, transition:"easeOutExpo"});
 _mc.btn.addEventListener(MouseEvent.ROLL_OVER, onMouseOver);
 _mc.btn.addEventListener(MouseEvent.ROLL_OUT, onMouseOut);
 _mc.btn.addEventListener(MouseEvent.CLICK, onMouseClick);
 if (i_g < total)
 init_gallery();
thanks

hi,
back to work,
then i used a loop in the first clear function:
var n:int = 0;
 while (n < xml_gallery_List.length() -1) {
 bottom24.gallery.content_mc.itemHolder_mc.removeChildAt(n); //
 i++;
and it remove all my previously loaded pictures,but it throw me an error :
RangeError: Error #2006: The supplied index is out of bounds.
at flash.display: DisplayObjectContainer/removeChildAt()
it seems error come from the removeChildAt, but i can't figure out what's wrong
i've tried to replace removeChildAt(n); by removeChild(n); and the loop crash Flash software....
any suggestion ?

How to add a loader to an image gallery loading content using only actionscript

hi i am loading all thumbs and images in a container on a single frame using action script..but the size of the swf becomes 1.2 mb so i want to add a loader to it...the loader i am trying to add counts the frames but my file has just one frame so the loader doesnot show up..
here is the script of my gallery..and the timeline has just one frame...
import mx.transitions.Tween;
import mx.transitions.easing.*;
this.createEmptyMovieClip("container",1);
var imagesNumber:Number = 18;
var scrolling:Boolean = true;
for (i=1; i<=imagesNumber; i++) {
container.attachMovie("thumb"+i,"thumb"+i+"_mc",i);
myThumb_mc = container["thumb"+i+"_mc"];
if (i==1)
myThumb_mc._x = (0.0)*myThumb_mc._width;
else
myThumb_mc._x = ((1.2*i)-1.2)*myThumb_mc._width;
myThumb_mc._y = (Stage.height-myThumb_mc._height)/2;
myThumb_mc._alpha = 100;
myThumb_mc.largerImage = i;
myThumb_mc.onRollOver = function() {
this._alpha = 60;
myThumb_mc.onRollOut = function() {
this._alpha = 100;
myThumb_mc.onRelease = function() {
this._alpha=100;
for (i=1; i<=imagesNumber; i++) {
var myClip = container["thumb"+i+"_mc"];
myClip.enabled = false;
scrolling = false;
_root.attachMovie("image"+this.largerImage,"large_mc",2);
large_mc._x = (Stage.width-large_mc._width)/2;
large_mc._y = (Stage.height-large_mc._height)/2;
new Tween(large_mc, "_alpha", Strong.easeOut, 0, 100, 0.5, true);
new Tween(container,"_alpha",Strong.easeOut,100,50,0.5,true);
large_mc.onRelease = function() {
scrolling = true;
var myFadeOut = new Tween(large_mc, "_alpha", Strong.easeOut, 100, 0, 0.5, true);
new Tween(container,"_alpha",Strong.easeOut,50,100,0.5,true);
myFadeOut.onMotionFinished = function() {
for (i=1; i<=imagesNumber; i++) {
var myClip = container["thumb"+i+"_mc"];
myClip.enabled = true;
large_mc.removeMovieClip();
container.onEnterFrame = function() {
if (scrolling){
this._x += Math.cos((-_root._xmouse/Stage.width)*Math.PI)*20;
if (this._x>0) {
this._x = 0;
if (-this._x>(this._width-Stage.width)) {
this._x = -(this._width-Stage.width);
anyone knows how to add a loadre to this...?
thanks..

Check these links for tutorials on loading images
http://www.kirupa.com/developer/flashcs3/loading_image_as3_pg1.htm
http://tutorials.flashmymind.com/2009/02/loading-multiple-images/

Will not load still pics or audio

I have recently experienced big problems with my Elements 9 program after I have loaded into a new HP PC. When I am editing my project it will not let me import pics or audio as I use to do in my old laptop. I have upgraded from XP to Windows 7. Would that account for it by itself? Also, the editing is very slow, and in fact my program actually shuts down several times during the editing process. Once my computer said that all processing power was being used (I have a quad computer with 3.6 ghz speed...I bought it sepcifically after getting advice from this forum). I am very disappointed. Do I need to upgrade? Should I take the two projects I have loaded in the program out and then reload? I can't make videos until I do something. Help!!! Bill

I'm concerned that you can't import audio or photos. That would indicate some serious issues at your end, and not something we can likely help you with here on the forum.
That is assuming that by audio you mean WAV files and that by photos you mean photo that have been resized to no larger than 1000x750 pixels in size.
Other than that, Premiere Elements 9 works great on Windows 7. I had no problem running it on my Windows 7 machine.
Although version 10 runs even better and version 11 runs better than any version of the program, especially with AVCHD footage.
You say the program runs slowly during the editng process. What type of media files are you editing? (I assume you're not working with photos or audio files, since you say can't load them into a project.)
What model of camcorder is your video coming from and what format and resolution is it? Did you use Premiere Elements' Get Media tools to get the video from your camcorder to your computer?
When you started your Premiere Elements project, what project settings did you select? If you selected the correct project settings for your video you will NOT see red lines above your clips when you add them to your timeline. Is that the case in your project?

Index page won't load images in flash gallery

this is the first time I have used a .us extension for a domain. I created a lighroom flash image gallery, exported it from lightroom into a folder called the domain name (pearlconcepts) which is located in my sites folder on my computer. I uploaded that folder (pearlconcepts) to my server into the root folder which holds all my domain folders. when I call up the url in my browser (pearlconcepts.us) the index page loads fine. but the web gallery images don't load (the flash player reads only 'loading'). however, if I upen the index page on my own computer (pearlconcepts.us/index,html), it loads all the images in the flash gallery perfectly.
I am wondering if there is some code in lightroom's web module which sets .com as a preference (my other sites are all .com and the uploaded folders all work fine). or if there is something I need to do to the root folder on the server to make the images load properly.
many thanks!
lenore

Starting with the first error.
Line 6, Column 26: character "&" is the first character of a delimiter but occurred as data
<title>Applegate Gallery & Custom Framing - Quality custom picture framing in V…
On the web, ampersands need to be expressed as HTML entities.
In your <title>, change & to this:
&
Save.
Just work through the list of errors and skip any you don't feel comfortable about changing for now. When you get most of the errors removed, re-upload your pages & we can take another look at your progress.
Nancy O.

Gmail not loading, n pages r not loading properly, pics r missing n too slow. dont know what is happening after re-installing the software also it is same

Pages r not opening fully, like g mail is stopped loading,pics r not completely opening in sites n loading is too slow but, my internet speed is 10Mbps.. actually I'm facing this problem since 4 days. i tried reinstalling the software too but it is in same condition. can u please help me to get out from this problem...
Please assist me to rectify this problem

Pages r not opening fully, like g mail is stopped loading,pics r not completely opening in sites n loading is too slow but, my internet speed is 10Mbps.. actually I'm facing this problem since 4 days. i tried reinstalling the software too but it is in same condition. can u please help me to get out from this problem...
Please assist me to rectify this problem

Transferring recieved pics to Gallery

I want to get pics of my grandson printed from my phone, which are in Messages / Saved Items. The shop I went to said that they must be in the gallery for them to print them. The assistant didn't know how to transfer them to Gallery and neither do I. I have a Nokia 6500 slide phone.
I would appreciate any help as I'm no Rhodes Scholar when it comes to finicky technology.
Regards

Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

How do I send pics from Gallery to my computer e-mail

How do I send pics from my droid mini gallery to my computer e-mail. When I try it seems the wifi is not set up.

Johno15218,
Lets get those picture to your email account. To email yourself the pictures follow the steps here... http://vz.to/1iRYNWg Let us know if this helps.
LindseyT_VZW
Follow us on Twitter @VZWSupport

Must reaccess page to load external pics

1. I must thank everyone's help in the forum for my success
in loading the Total photonumber variable using LoadVars and
captions from an XML file.
2. When tested locally on different computers to ensure that
paths are correct, the mini pics load correctly.
3. However, once the files were posted to my website, you
must access the page TWICE by first going to it, exiting, and when
you RETURN to the same page, the mini pics are visible.
For example, you click on the topics button which brings you
to another movieclip that contains the actionscript below:
All of the _global variables are defined in the maintime.
These 4 mini pics are loaded from an external directory. When
you click on one, the big picture shows up.
Examples:
http://www.4themax.com/photogallery1.html
-> WFUV (photos)
http://www.4themax.com/photogallery1.html
-> Topics
http://www.4themax.com/photogallery1.html
-> Topics -> clicking the big pic will take you to a
portfolio page like one of the above.
======================================= THE CODE
====================================
//initialize variables and properties
big._alpha = 0;
//_global.WhichMainPic = 1;
//initiate change to new image when buttons are clicked
next.onPress = function() {
if (_global.WhichMainPic< _global.TP[foldnum] &&
!fadeIn && !fadeOut) {
fadeOut = true;
_global.WhichMainPic++;
input = _global.WhichMainPic;
back.onPress = function() {
if (_global.WhichMainPic>1 && !fadeIn &&
!fadeOut) {
fadeOut = true;
_global.WhichMainPic--;
input = _global.WhichMainPic;
_root.onEnterFrame = function() {
// when a new Photo is selected, fade out, load new image,
and fade in
if (big._alpha>10 && fadeOut) {
big._alpha -= 10;
if (big._alpha<10) {
loadMovie(_global.PhotoFolder+"0/"+_global.WhichMainPic+".jpg",
"big");
fadeOut = false;
fadeIn = true;
if (big._alpha<100 && fadeIn && !fadeOut)
big._alpha += 10;
} else {
fadeIn = false;
// limit input field
if (input>_global.TP[foldnum]) {
input =_global.TP[foldnum] ;
// initiate change to new image when Enter key is pressed
if (Key.isDown(Key.ENTER)) {
fadeOut = true;
_global.WhichMainPic = input;
// if a number is entered in the input field but Enter is not
pressed, change
// back to current Photo number when clicking anywhere else
//inputField.onKillFocus = function() {
input = _global.WhichMainPic;

This issue can be caused by malware on your computer.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Loads of pics in gallery

Similar Messages

Maybe you are looking for