Loadtest result in 9.2

Hi,
I just try the new version (9.2) of Oracle Application Testing Suite.
I executed an existing loadtest, and in the created report in Show Server Times Only mode. The values in the generated result table are false:
min: 0,209
max: 0,032
avg: 0,205
std dev: 0,026
90th %: -0,209
The minimum value is greater then maximum value, and the real execution time is about 500 second.
What can be the problem? How can I get the real server response time?
Br,
Tamas

Do you have any success story with Oracle Streams 9.2? We are exactly at the same point (trying the implement an historical database using Streams). The OLTP system is generating arround 50G of redo / day.
Actually, we got some issue with large transaction (500000 LCR).
I'am a little bit concern at this point...
Thanks

Similar Messages

VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
Hello All,
I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues.
Any suggestions on the issue i am facing
error is :
could not read result repository: unknown transaction id in results:
or
could not read result repository: unknown request id in results:
Thanks
Satish

Hi Kotapati,
>>Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
If possible, I suggest you could share me simple load test for us so that we will further help you.
You could upload your load test to OneDrive and then copy link here.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Not getting or clear about Load Test Result analysis

Hello Team,
I ran the load test VSTS 2012.
i am getting below result:
Overall Results
Max User Load
50
Tests/Sec
1.85
Tests Failed
3,288
Avg. Test Time (sec)
25.7
Transactions/Sec
0
Avg. Transaction Time (sec)
0
Pages/Sec
46.7
Avg. Page Time (sec)
0.26
Requests/Sec
221
Requests Failed
13,315
Requests Cached Percentage
43.2
Avg. Response Time (sec)
0.097
Avg. Content Length (bytes)
11,888
I am not clear about avg. response time: 0.097 ---actually it is in seconds right??
SO 0.097 means less than 1 seconds it it true???
sometime i observe that avg. response time as 0.67 ..............again it is less than 1 seconds
So how actually it is calculated in VSTS webtest 2012..............??
because when i took the reading from fiddler or network capture ---------for the same scenario -------i observed it is taking 7-8 seconds .........here -------its showing 0.097 ............
I understood ................here load is of 50 users..............but for single users also i observe avg. response time as 0.29 or 0.037 like that
Very confused about this result
Could you please tell me formula or detailed explanation?????????
If i get details about all parameters then it would great ------------------
Thanks in Advance

Hi Mon_bk,
As Jack has stated the response times are measured in secs.
If you think the response time is unrealistic have you tried doing a single test run directly from your script? What response time do you get?
Also how have you setup your users? Are they all cached enabled or 100% new users? You can check this if in the loadtest you click on the scenario name and then in the properties section there is a field called: "Percentage
of new users" if this is 0 that means all your users have cached enabled and this could be reason why the response times are so low.
Kind Regards

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses.

Refresh of Data in Xcelsius from Web Intelligence Results

Hello,
I am new to the forum but not to Business Objects/Xcelsius. I attended the SAP Sapphire Event last May and spent time in the Business Objects lab. Two Product Managers demonstrated how I would be able to refresh the data in an Xcelsius dashboard using Live Office by retreiving results from a Webi document without refreshing the Webi query.
For example, my Webi document contains 100,000 result rows. I want to be able to select a dropdown in my dashboard and have Live Office retreive only a subset of the 100,000 rows. This being done without having the Webi query being refreshed from the database. The Webi query would be refreshed nightly.
The Product Managers advised that this functionality would be available in Service Pack 3 or before. As of now I cannot find out how to make this work. Any help or information would be appreciated. Thanks.

Hello Charles,
WebIntelligence Input Controls are a way to enhance and customize user experience with report filters, they are therefore based on report filters and the feature is more focused on user interface & experience rather than exposition outside web intelligence.
Anyway, AFAIK, report filters are not available from Live Office report parts, you can only filter content with prompts, which requires the document to be refresh from the database, which has a direct impact on performance and scalability for consumers.
However, if you are with WebIntelligence XI 3.1 SP2 you have the alternative to publish from WebI Rich Client, report elements (any table or chart) as web services (called BI Services).
This tool is based on Qaaws technology, and share some of its features (main being that is uses the same Xcelsius Data Manager connection), it exposes a large part of WebI interactions to external consumers (esp. Xcelsius) : report filters, drill, prompts.
Besides this tool provides a set of call input parameters to tune web service consumption for best performance and scalability, enabling to leverage WebI document management features like scehduling, publishing and refresh, so consumers can balance performance with real-time data.
More information is available from WebIntelligence Rich Client user documentation from section sharing webi content with other web applications.
I recommend you install the latest fix pack (SP2.5 and above), as some initial fixes were required to ensure full compatibility with Xcelsius.
Hope that helps,
David.

When i login to yahoo, my first click results in the spinning wheel. Could i have a virus Or why does it only happen when i login to yahoo?

When i login to yahoo, my first click results in the spinning wheel. Could i have a virus? Or why does it only happen when i login to yahoo?

Firefox allows to select part of a word. You can select a word with a double click and use Shift + left click to set the end of the selection, so you need to click at the end of the last word instead of in it.

Sales Analysis Report - Items -- blank result

Hi,
I'm testing a setup and running the sales analysis report. It works for the Customer version but I get no results when running on Items.
I'm on SBO 2007A SP01 PL07. There are open and closed invoices for inventory items; no credit memos have been posted. All Item type invoices.
When I run by Customer, I get the correct data - open and closed invoices for that customer.
When I run by Items, I get no results. The date range is the same for both reports.
When I run the purchase analysis on Items, I get data for the same items I am trying to see in the sales analysis.
Any ideas what could be causing this?
Thank you,
Heather

HI Gordon,
I left the default settings:
- Annual Report, Invoices, Individual Display, No Totals
- Posting Date: whole fiscal year
- Main selection: left blank/default (group = all, no properties)
I have double/triple/quadruple-check even the Secondary SElection to make sure there's nothing there.
I have also run it on Due Date instead of Posting Date, still no results (if run on Items).
As I mentioned, the selection criteria is what I want but for some reason that one version, Items, does not work. The other 2 tabs work with the same selection.
Heather

BW Web Report Issue - Result set too large

Hi,
When I execute a BEx Query on Web I am getting “Result set too large ; data retrieval restricted by configuration (maximum = 500000 cells)”.
Following to my search in SDN I understood we can remove this restriction either across the BW system globally or for a specific query at WAD template.
In my 7x Web template I am trying to increase default max no of rows parameters, As per the below inputs from SAP Note: 1127156.
But I can’t find parameter “Size Restriction for Result Sets” for any of the web items (Analysis/Web Template properties/Data Provider properties)….in the WAD Web template
Please advise where/how can I locate the properites
Instructions provided in SAP Note…
The following steps describe how to change the "safety belt" for Query Views:
1. Use the context menu Properties / Data Provider in a BEx Web Application to maintain the "safety belt" for a Query View.
2. Choose the register "Size Restriction for Result Sets".
3. Choose an entry from the dropdown box to specify the maximum number of cells for the result set.
The following values are available:
o Maximum Number
o Default Number
o Custom-Defined Number
Behind "Maximum Number" and "Default Number" you can find the current numbers defined in the customizing table RSADMIN (see below).
4. Save the Query View and use it in another Web Template.
Thanks in advance

Hi Yasemin,
Thanks for all help...i was off couple of days.
To activate it I can suggest to create a dummy template, add your query in it, add a menu bar component add an action to save the query view. Then you run the template and change the size restriction for result set then you can save it by the menu.
Can you please elaborate on the solution provided,I created dummy template with analysis and Menu bar item...i couldn't able to configure menu bar item...
Thanks in advance

IR: aggregation result in report footer

Hello!
This quote from "Beginning Oracle Application Express 4.2" at page 174 (about aggregation in IR):
"The results are displayed at the end of the report."
There is a simple method to print the results of aggregation to the report footer on each page?

I asked - and I answered
For making this I create on-Demand process for calculation results of aggregation (using APEX_IR_PKG) and make ajax request to him in "After Refresh" event of IR.
There is the detailed manual with sample http://devsonia.ru/2013/11/14/oracle-apex-aggregation-in-interactive-report-on-each-page-en/.

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

How can i display the result of java class in InputText ?

Hi all,
How can i get the result of java class to InputText Or OutputText ???
also can every one in the forum give me road map for dealing with java in oracle adf because i'm beginner in oracle adf
i saw some samples in oracle adf corner but it's difficult for me.

User,
Always mention your JDev version, technologies used and clear usecase description (read through this announcement : https://forums.oracle.com/forums/ann.jspa?annID=56)
How can i get the result of java class to InputText Or OutputText ???Can you elaborate on your requirement? Do you mean the return value of a method in a class as output text? Or an attribute in your class (bean?) as text field?
-Arun

How can I use ONE Text search iView to event/affect mutliple Result Sets?

hello everyone,
i have a special situation in which i have 6 flat tables in my repository which all have a common field called Location ID (which is a lookup flat to the Locations table).
i am trying to build a page with a free-form text search iView on Table #1 (search field = Location ID). when I execute the search, the result set for Table #1 is properly updated, but how do I also get Result Set iViews for Tables #2-6 to also react to the event from Text Search for Table #1 so that they are updated?
i don't want to have to build 6 different text search iViews (one for each table). i just want to use ONE text search iView for all the different result set tables. but, in the documentation and iView properties, the text search iView doesn't have any eventing.
if you have any suggestions, please help.
many thanks in advance,
mm

hello Donna,
that should not be a problem, since you are detailw with result sets and detail iviews because custom eventing can be defined for those iviews.
Yes, it says "no records" found because an active search and record selection havent' been performed for it (only your main table does).
So, yes, define a custom event, and pass the appropriate parameters and you should be fine.
Creating a custom event between a Result Set iView and an Item Details iView is easy and works. I have done it.
See page 35 of the Portal Content Development Guide for a step-by-step example, which is what I used.
For my particular situation, the problem I'm having is that I want the Search Text iView's event (i.e., when the Submit button is pressed) to be published to multiple iViews, all with different tables. Those tables all share some common fields, which is what the Search iView has, so I'd like to pass the search critera to all of the iViews.
-mm

ITunes Match Unable To Get Past "Waiting for Apple to deliver your iTunes Match results..."

Been trying for days but it just gets to "Waiting for Apple to deliver your iTunes Match results..." and then stops and allows me to press the Start button again to start the match process. Sometimes I get error -3231.
I've called Apple and they want $19 to solve the issue even though I paid the $25 for Match.
I've turned iTunes Match off. Turned Genius off. Logged out of my iTunes account. Quit iTunes. Restarted. Logged back into iTunes account. Turn Genius on. Turn iTunes Match back on and let it go through the process again with no success.
My library has a couple hundred songs less than the 25,000 max but it is pretty large. Had the same issue when I tried with a smaller library some time ago. I've created a new library and have the same issue.

Hi,
You should consider rebooting your internet router
Then try holding option key whilst turning off match. Close iTunes and then reopen. Turn on iTunes Match and select add this computer.
Jim

How to get the results in one line

Hi
if i use the script below i get the name of path and then : and in next line i get the results.is there a way to get the results from every path after the : and not in the next line?
another question - is there a way that the script will not show the server name on every path?
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter
THC

If you take you script and pipe it to get member, it will give you a list of various script properties.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | get-member
You will see that the object type returned by "Get-Counter" is Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet.
TypeName:
Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet
Name MemberType Definition
Equals Method bool Equals(System.Object obj)
GetHashCode Method int GetHashCode()
GetType Method type GetType()
ToString Method string ToString()
CounterSamples Property Microsoft.PowerShell.Commands.GetCounter.Perfo...
Timestamp Property datetime Timestamp {get;set;}
Readings ScriptProperty System.Object Readings {get=$strPaths = ""...
You can try grabbing different properties, and they will print out differently, displaying the data on the same line in some cases. For example, pipe your output to a "foreach-object" block, and then for each object print out the CounterSamples property.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | foreach-object { ($_).CounterSamples }
This should all print on one line now. However, you also asked if there was a way to not have the server print out on every line. The way to control the format of these outputs is to use the "format-table" cmdlet. So you would pipe your output to format-table
and then give it various options. This is how you would pipe it (without any options).
(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | object { ($_).CounterSamples | format-table }#OR USE YOUR ORIGINAL CODE(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | format-table }
Now, it's up to you to give format-table the options you want. With no options, output will look unchanged. To see what options are available to you, use get-help.
get-help format-table
I hope this helps!
Thank for all the info...

My iPod touch is stuck in landscape view. Even when held vertically if I open facebook or safari is rotates to landscape. Have tried turning on and off, same results. Any ideas to fix?

My iPod touch is stuck in landscape view. Even when held vertically if I open facebook or safari is rotates to landscape. Have tried turning on and off, same results. Any ideas to fix?

Try switching it back from landscape to vertical. Or, go to settings and see if you have any special setting turned on that enable only landscape view. Also, try hooking it up to your computer and charging it to see what happens.

Loadtest result in 9.2

Similar Messages

Maybe you are looking for