Local Adjustment Brush - create a line

Hey everyone,
I thought that in Lightroom 2, you could use the local adjustment brush, click on an area, then hold down ctrl key, click another area, and a line would be drawn between the two points. How do you do it in Lightroom 3? Am I mistaking this in Lightroom 2? I'm pretty sure I used it alot for a while and can't figure it out now.
Thanks ahead of time,
Colby

Colby McLemore wrote:
I used this feature in the past to paint along straight edges that Auto mask does a poor job on. It may have been in Photoshop that I did this but I thought I also used it in Lightroom.
Not in Lightroom. Applying changes to a selection is sort of the domain of a pixel editor.

Similar Messages

My Local Adjustment Brushes no longer recognized after LR 4.3 update

After running 4.3 update, my local adjsutment brushes are no longer recognized and appearing in the Lightroom GUI. They are all still located under 'Lightroom' folder --> 'Local Adjustment Brushes' folder (nothing has changed and I see all files are still there in Finder), but no matter how many times I've restarted LR, they are not showing up in the GUI.
Please advise ASAP!! Thank you

It's not clear from your initial problem description, but are you talking about local adjustment presets that you have created yourself (i.e. user presets), or are you talking about the standard presets supplied by Lightroom (Burn, Dodge, Soften Skin, etc)?
If it's the latter, go to Preferences>Presets Tab and click on "Restore Local Adjustment Presets".

Sharing custom preset local adjustment brushes between 2 computers?

As I start to do more and more of my work in either Lightroom 2.2 or ACR, I'm creating "preset" local adjustment brushes.
I run on a desktop and a lap top.
Is there a way to copy and move the new preset brushes from one computer to another?
Asked another way, where does ACR and/or Lightroom store these things on a Mac so that I can copy from one and move to another?
Thanks.
Steve

ACR Presets and Settings etc. are stored in:
Users/Library/Application Support/Adobe/Camera Raw/
You can copy them to another computer and store them in the equivalent place.

Local Adjustment Brush Sliders Are Gone

I did a reinstall, repair actually of LR 2.6 due to blue screen errors (which turned out not to be LR related) and now my local adjustment brush sliders are gone! I've got the old style, one slider with the other controls being + & - buttons. I've got no clue what else is gone but I would like my sliders back.
What happened? LR says it's the most current version.

Jim,
In the upper right corner of the brush panel is a little whte buttton. It is on the same line as "adjustment:".
Click that button to reveal your sliders
Rich

Wacom Tablet Pen Pressure stops working in Photoshop after using Lightroom Local Adjustment Brush

Hi all,
I am experiencing a problem with my Intuos Pro Medium (driver 6.3.9w3 on Windows 8.1)
I am using Lighroom 5.6 and Photoshop CC 2014.
I an get the pen pressure to work in Photoshop without any problem. However, if I go into Lightroom and use the Local Adjustment Brush and then transfer the photo into Photoshop (Right Click Edit In => Edit in Adobe Photoshop 2014 CC) then the pen pressure stops working in Photoshop.
Really frustrating... The only workaround is to close both Photoshop and Lightroom, then reopen Photoshop, then usually the Pen pressure feature starts working again.
Has anyone experienced this before or has any idea how to fix this?
Thanks,
Guillaume

Your tablet driver isn't reporting pressure correctly.
The knockoff tablet drivers usually need to be revised for each new version of Photoshop (and we have no idea why).
Contact your tablet maker to see if they have updated drivers to fix their bugs.

Local adjustment brush, not in XMP file

Local adjustment brush, not in XMP file
I shoot everything on location and make minor edits while on location. My location edits usually transfer with the XMP file. I used the new local adjustment tool while on location, however when I got back to my main workstation and transferred the images the local adjustments were not there. Can this be fixed somehow, as it would be nice to only make those edits only once? I do not use as a catalog program, once the job is complete it is removed from the lightroom catalog so again those local adjustments are gone.
Thanks
Mark

The problem may be and I am only guessing here that because no other program
currently supports the adjustment brush options that that information is not
added to XMP file. Not even Photoshop or ACR supports that as of yet. Though
I honestly would have expected that information to be there anyways it would
just be ignored by programs that don't know what to do with (basically
everything but LR 2.0).
Have you tried using DNG files. From what I understand an XMP file it not
needed as the information that is normally in a XMP file in kept inside of
the DNG file. This maybe another reason to go with the DNG format.
Good luck.

Strange behavior of LR3 local adjustment brush

Lately, it seems that LR3 (Mac) is acting strange when doing local adjustments. When using the adjustment's brush, the area being "painted on", i.e., adjustments, a square area centered on the cursor position is shaded a bit darker than the area not covered by the brush. What gives?
dds

Hi,
dsteinauer wrote:
Lately, it seems that LR3 (Mac) is acting strange when doing local adjustments. When using the adjustment's brush, the area being "painted on", i.e., adjustments, a square area centered on the cursor position is shaded a bit darker than the area not covered by the brush. What gives?
dds
I have had similar problems with 3.2 and also (while doing local adjustments)
- rectangular areas of the image suddenly duplicated elsewhere in the image
- whole image flipped upside down while painting with the local adjustment brush
Using Undo always put back the image in a normal state (the state it was before starting to apply the last local adjustment).
I have not seen this in 3.3 (final release) until now but I didn't use it much since it has been made available.
NB: (before someone asks) Yes, I do have the latest NVidia driver installed.

How to change local adjustment brush size when unselecting ?

Perhaps a stupid beginners question but i cannot seem to find this one..
Using the local adjustment brush i can change the size of the brush using the [ and ] brackets
However.. when i make a small error and want to erase brushed-area by using the ALT key then the brush size seems to be fixed to one size ???
Erwin
http://www.erwinbeckers.nl

Erwin,
As they say, there are lots of ways to skin a cat.
Erase mode uses a different setting for the brush size. You can adjust it, but not with the brackets while the Alt key is held down.With the Alt held down, you can still move the size slider in the brush panel with the mouse.
I can't speak for Macs, but on Windows, my scroll wheel works to change the size of the brush, whether the alt key is pressed or not.
If that won't work for you, you can click on the "Erase" text button in the brush panel and then use the bracket keys to change sizes. You'll be in erase mode even without holding down the Alt key. In fact, in that mode, holding the Alt key puts you back in "paint" mode.
Hal

Local Adjustment Brush - can't choose color

When I choose to add color to a local adjustment brush, there is a small square on the color spectrum but I cannot select anything as my eye dropper has disappeared. How do I get it back? I am able to choose a color from the swatch above but not within the color spectrum below.
I appreciate any help.
Lightroom3

I'm using Windows 7 and my monitor drives are up to date (or at least as recently as last week I checked). I think it is a setting somewhere. I can still choose a color but have to do it with the arrow keys.

Local Adjustment Brush Panel Changed in LR3?

In LR2, I used to be able to click a small rectangular button in the local adjustments brush panel to change the lay out of the effects sliders. I can't seem to find the button in LR3, and the default layout of the effects sliders is much more cumbersome to work with than the alternative view offered in LR2. What am I missing???

So does that mean I could create a custom + exposure, +
saturation, +clarity +sharpening brush?
Another Q: when I use the local mask, I get what looks like sand smeared around the edges of the brush on solid surfaces. When I am using the local mask around the edges of vegetation, the leaves sart to get a lot of halo-ing. Is this normal? When is the best time to use the local mask?

Acr local adjustment brush erase

In the local adjustment panel of ACR my erase button deactivates when I start to use it. The add button becomes active and the brush only adds to the mask. I am able to erase by holding the option button . This is inconvenient when I go to resize the brush.

I have the most recent version of PS cc 2014 according to my APPS. This issue was resolved via a live chat with Adobe support. An earlier update didn't install correctly.

Local Adjustment Brush does not work in Windows 7, 64-bit

All other tools and functions work OK. My issue is just with the Adjustment Brush; The Adjustment Panel opens when the brush is selected and the brush moves, but none of the adjustments are applied to the image. The problem is clearly related to the new operating system. This was just confirmed, by removing the hard drive with the Windows 7, 64-bit OS, and inserting an old hard drive with Windows Vista, 32-bit installed. The adjustment brush works fine with the old OS and the same version of PS.
My normal monitor resolution is 1920 x 1200 with a DPI of 151; however, this DPI is not compatible with PS, so I reset it to 149 evey time I use PS. Lower screen resolutions and DPI settings don't resolve the problem. I mention this only because of a previous cursor problem that was resolved by changing the DPI.
I'm using CS4 with Camera Raw version 5.6. Version 5.5 also does not work.
Can anyone offer suggestions?

Problem solved. One of the recent upgrades to Camera Raw reset the flow rate to zero, which I did not notice until after posting the message.
Sorry for the error.

Lightroom 2.2 is locking up or crashing while using localized adjustment brush

Ever since I started using the LAB, lightroom has locked up or just flat out crashed after 5-15 minutes of work with the brush on the same image. Why and how do I solve this?
PRODUCT: Lightroom 2.2 , Photoshop CS3 10.0.1
PLATFORM Dell PWS690, Intel Xeon CPU 5150 @ 2.66GHz, 4 GB of Ram
Lightroom Library on internal one gig drive.
Backed up to a Dell raid array with 6TB of storage via a gigabit Ethernet
Nikon D3
Thanks,
Mark Gamba
[email protected]

i gotta say i'm getting pi**ed off as well with this version. i'm having the same issue with LR crashing about 5 minutes into the picture using the adjustment brush.
i've got 4 gig of ram and no other programs running. i should be able to keep CS3 open but closing then re-opening is a pain.
anyone from Adobe looking into this or are we just shouting into an empty cave?

LR 3.2 - Local adjustment brush and heal/clone tool broken

Hi,
After installing LR 3.2, the first thing I noticed is that it is much slower than the previous version (using XP Pro + 3GB memory and a speedy processor).
But the most terrible novelty of this version is that the Adjustment Brush is going berserk after a while:
It first slows down to a crawl, so slow that it's almost impossible to work with.
While working with it after a while, it starts to show random rectangular areas that are copies of other areas of the image that have nothing to do with the area I'm working on. This happens after a brush stroke. The Undo command makes these rectangular "patches" disappear.
From time to time, the whole image is flipped upside down (You can't believe it? Neither could I).
Eventually, afte a brush stroke, the sandclock mouse cursor is displayed and the program freezes (at this time it can be using over 1 GB of memory although I'm working on a single, standard EOS 5D image). The only way to stop this madness is to kill the process.
The Heal/Clone tool also shows a similar misbehavior.
I didn't have these problems with the previous version.

Ian,
Ian Lyons wrote:
Are you looking for help? If so then it would really useful if you provided some information on hardware, OS and what exactly are you doing when the system freezes. Also worth noting that applications very rarely (even badly coded apps) cause the hardware to crash. System crashes are more often than not due to bad device drivers or bad hardware that an application may expose.
I'm a software professional since PCs exist. I have enough experience to identify software problems when they appear. At least, I'm able to determine whether I have a hardware problem or if the software I'm using (or writing) is buggy. I have read many reports, many threads, many advice about these performance issues. I'm pretty sure that the problem is LR. I repeat: I do not have any performance issue when editing images in Bibble 5, Photoshop or DxO Optics Pro. BB5 is at least an order of magnitude faster than LR when editing images.When I use the Adjustment Brush in Camera Raw, there's absolutely no problem. My hardware is powerful enough and my installation is pretty clean (could it be powerful enough in Camera Raw and not in LR?). My OS is very stable. I have not seen a BSOD since years and all my applications are running flawlessly on this system (which includes image editing applications, software development tools, and many others...).
Users having various and very powerful systems (PC or Mac) are reporting the very same problems. Like Bruce, I'm convinced that this is not a hardware resource problem. We didn't have these problems with LR2 and LR3 was supposed to enhance performances. Version after version, it has now become unusable for me.
Drawing the conclusion that since many users don't have any performance issues, the problem must be on the user's side would be erroneous. The bug is in LR and may or may not appear depending on the circumstances. Any developer knows that a bug may or may not hit a given user depending on how she uses the software. I admit that these bugs are hard to fix. But LR has to be fixed, no doubt.
I profoundly regret that Adobe do not acknowledge this.

[CS] Basic brushes create dotted lines instead of solid

I just received an almost-new Wacom CTL-470 tablet from my father yesterday, so naturally I began fooling around with Photoshop line drawings and simple art.
The initial problem I discovered was that, oddly enough, the basic brush tools, when dragged, would not create a solid line. It would only create a dotted line, the spaces between dots varying with speed of the pen against the tablet.
If I dragged the pen slowly enough (very... very slowly), it would create a kind of shaky line, which was just dots very close together.
Naturally I thought it was the tablet's fault, but upon trying to use the mouse to do the same function, the problem persisted.
I use Photoshop CS and I didn't change any settings at all today.
I have some things that friends wanted me to do for them, and this problem is starting to irritate me as I have no idea where it came from or how to get rid of it.
I would also like to know how I can use my tablet to create a tapering effect with my pen pressure. The "pen pressure" setting in the Brushes menu seemed to have no effect.
I have never experienced this problem before and I would like help as soon as possible. Thank you so much in advance.
Here's an example of the issue, both in large brushes and a smaller one in the background.

Look under Brush Tip Shape and look at the spacing settings or that spacing is not unchecked. (the default spacing is usually 25%)
For tapered strokes set the Size Jitter under Shape Dynamics to Pen Pressure, then the size varies depending on how hard you press the pen on the tablet.

Local Adjustment Brush - create a line

Similar Messages

Maybe you are looking for