Local Area Taxes

Dear All,
Can any one suggest how to configure local area taxes (US payroll) and reflection of the same in Payslip.
Regards,
Anil Kumar P.

Hi,
You can only see planned/psted deprecation listed in tab 'Posted Values' (AW01N) when the area is set to post to GL - see OADB. Only for parallel curr. aras the setting can be 0 and still you will see depreciation planned/posted in the said tab. In this case the system recognizes itself by the customizing that this is a parallel currency area. For all other areas you must indicate if a depr. area is posting depreciation in OADB. Else you will find a text saying "There is no depreciation".
Kind regards,
Brigitte

Similar Messages

Pennsylvania Local Service Tax Not Calculating correctly

I received a TUB for a local service tax area that is going from a $10 tax to a $52 LST( tax type 084). When I review the BSI interface/ script , I see an additional tax code of a 9 which means to substitute the lump sum for the pro-rated LST amount which is for authorities that have a $10 or less tax.
The LST is showing up as a lump sum of $52 for /484. In PA the LST is prorated per pay period of $2 per pay period. I need to remove the Additional Tax Code. Once I do this, the tax will calculate as it should in the amount of $2.00.
Please advise how to remove this additional tax code of 9. I am referencing TUB # 179.
Thanks,

Tax Authority - East Petersburg Borough (PAKV). Tax Type 84, Local Service Tax. When I maintain PAKV on the IT 0207 record it calculates the local withholding.
I am testing TUB # 205. This particular tax authority is adopting local service tax (84) instead of OPT (51). Effective immediately.
When we first loaded the TUB and I ran payroll for an employee, the tax area was not pulling in the payroll results. I did the steps I listed in my post and I now get the tax authority pulling in but the $2 bi-weekly deduction is not coming out. I also noticed, the taxable earning is showing $0 thus the tax is showing $0.
Thanks for your response,,,

Local sales Tax

Dear SD CIN experts,
I have maintained the condition records for Local sales tax with the combination of
Country
Region
Region of plant
Customer Classification
Material classification
Even though taxes are not dtermining at sales order level pls help me out in which combination
condition records has to maintain so that taxes can be detemine.
thanks
supriya

Hi!
To know the reason why Sales Tax is not flowing, try following things :
1. First Check if you are using TAXINJ or TAXINN Tax procedure.
If you are using TAXINN then check the condition records.
For TAXINJ check the condition records of UTXJ use table 368
Country/PlntRegion/Region/TaxCl1Cust/TaxCl.Mat
Check the tax code mentioned in the condition record of UTXJ. Then using FTXP transaction, Check the Condition Rate of Tax Conditions ( Ideally JIN1, JIN2, JIN3, JIN4 etc)
If no rate is maintined then pls maintain the same and save the Tax code.
Also check if you have used the same condition type in the pricing procedure.
Moreover, Check Customer Master data where Region need to be available.
Finally check the delivery plant has been assigned to the item.
If all above is in place then System will populate the tax in Sales Order.
Hope this will resolve your issue.
Regards,
Dnyandeo H. Ainarkar

Local area connection doesn't have valid ip

I have a Touchsmart 320-1030 that belongs to a friend. Everything was working fine then for no apparent reason connection to the internet was lost. They have contacted their isp and gone through all troubleshooting with them. All other equipment (ie laptops, phones, ect..) connect and work fine. The windows troubleshooter offers no help and says local area connection doesn't have valid ip is the reason it won't connect. This is true when trying to connect wired or wireless. I piddle with fixing computers as a hobby so they have asked me to see what I can do if anything. I have been Googling, reading, and trying everything I have found for three days and have had no luck. So I am hoping I can find some help here. I have never seen anything like this. It may be a hardware problem and I'm not smart enough to realise it. But I need to know that too.
System -
Touchsmart 320-1030
Win 7 Home Premium
4 gigs ram
What I have done -
Brought system to my house to see if it will connect, it does not so I am working on it here.
I have rebooted modem & router
Connected systen directly to modem bypassing router
Uninstalled and allowed windows to detect and reinstall network drivers
Updated network drivers
Updated Bios
Tryed to inatall orginal drivers from support but they wont install
I have changed from detect automaticly to use this ip in tcip ip4 and used ip I know is good to my router -
When I did this last thing the wireless did see my network but the network 2 thingy that it makes still won't connect even tho when I search for connections the list says I am connected to my network. The little thing by the clock says not connected. Also the ethernet adapter says unknown public network when I do that. Wireless says unknown public network or connection when I have it detect ip automaticly.
Network discovery will not turn on in homegroup, nether will the services assocated with it.
I have run tweaking . com firewall repair
I have uninstalled avast security, there are no other av or firewall programs
I have uninstalled bonjoir because I read that causes a conflict of somekind
I have run tweaking . com windows repair ( just in case because it looked liked the firewall repair was doing something).
I have run sfc /scannow and it found and fixed some things, ran it again and it found nothing.
I am pulling my hair out with this one. Please help.
Thanks for your time.

SSCRSR1, welcome to the forum.
Wifi problems can be very difficult to diagnose. Here is the Wireless / Networking / Internet section for the computer. Read the Wireless area to see if there is any help with the problem.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

I am unable to access intranet on my MacBook Pro 13" with OS X mavericks. Is it possible to use files on the Local Area Network?

I am unable to access intranet on my MacBook Pro 13" with OS X mavericks. Is it possible to use files on the Local Area Network? I use the files on the Local Area Network on my windows computer by typing in the I.P address in the library. Kindly guide me how i can use these files stored over the Local Area Network.

I disabled GateKeeper's automatic blocking of unrecognised developers, and so I was able to install the driver.
The Mobile Connect program is now installed, but the computer still does not recognise the modem.
I also borrowed a USB hub from a friend and it didn't make a difference.

How to set password for Local are connection?

How to set password for Local are connection?

do you mean the 802.1x authentication?
check out links below:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/Sw8021x.html
http://technet.microsoft.com/en-us/network/bb545365.aspx
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Can somebody can tell me is CC for team can support to save the files in the local area without using the cloud ?

Can somebody can tell me is CC for team can support to save the files in the local area without using the cloud ?

The desktop applications are still installed on your computer, and the files are also saved on your computer.
Optionally you can upload files with a browser to https://creative.adobe.com/files, or sync up files using the file sync that is part of the Creative Cloud desktop application. The online file storage is private to you, no one else can see it your files.
If you do want to share your files there are two options:
You can Collaborate, which is sharing a folder with another Adobe ID. Only the person you collaborate with can see the folder.
You can use Send Link to send a publicly accessible url to a file or folder.

Address Book won't import local area code

I'm trying to export my contact info from Palm Desktop to Address Book. Everything works fine, expect that AB doesn't import a contact's area code if it's my local area's code. In this case AB only imports a contact's 7 digit phone number. This isn't a problem with area codes outside of my local code, --they import just fine, and I get the whole 10 digits.
I've tried exporting both vCards and text files. By opening the text file with TextEdit, I have verified that Palm Desktop is indeed exporting the area codes --both my local code and distant ones. Yet when I import that same file into AB, contacts in my local area are stripped of the area code.
Any ideas?
Thanks in advance, --Brian
12" Powerbook G4 Mac OS X (10.4.8)

Thanks for your questions/suggestions. I think they have helped lead me in the right direction over the past 24 hours, though I still don't have a solution.
To make the long story short:
I believe the problem lies in the fact that as I've added contacts to Palm Desktop over the years, I've not included an area code if they were in my area. Now I'm switching to AB since it can sync with my new cell phone, and I'm needing area codes for all calls. Rather than enter my local code for hundreds of contacts, I've used a Palm preference whic sets up a "default area code."
What I have discovered is that contacts for which I have manually entered an area code transfer to AB just fine. Contacts for which this preference provides the area code lose this information in the transfer. This is baffling, because the two cases look identical when viewed with Textedit, --the area code is visible plain as day in either situation.
Just as puzzling --when AB imports a contact it gives a chance to review the information if the card is a duplicate. When I perform this review a "Text File Import" window appears. In this window areas codes always appear, --whether manually entered or provided by the Palm preference. However, in the "Reviewing Card" window which follows, cards which had Palm preference provided area codes have inexplicably lost those codes, while those with manually entered codes have retained them.
Any further thoughts?
Thanks some more, --Brian
12" Powerbook G4 Mac OS X (10.4.8)

Local area network disable internet connection

Hello,
i have a strange problem, i explain
Computer A win XP ip 192.168.2.231 with onboard network card
Computer B win 98 ip 192.168.2.232 with pci network card
Router Linksys WRT54GS, with ip 192.168.2.230, but i use it just like a hub because i don't have here internet connection
both computers connected with cable and all work nice.
Then i added a wireless/USB Planet because i want to connect it to another router in another building to get internet connection, so i connected this Planet wireless/USB to computer A, all work nice, i get signal internet connection and ip 192.168.1.102
but ..... and that is the problem, when i connect computer B win local area it disable my internet connection, i try to ping some domain name from computer A, where Planet adaptor is installed, but it try to find this domain name in local area instead to route in internet connection, if i deactivate local area ..... internet connection work like a charm.
I tried to change several ip groups, all in 192.168.1.x, tried to disable, enable DHCP server in router, tried to change subnet mask, tried to use proxy, to play with router configuration...... nothing it not work.
So i think something about network onboard conflicts, so i installed a new pci card in computer A, ouffff nothing when i active local network i stop to have internet connection, i tried also to install another USB wireless adaptor and connect it via wireless with router, nothing ... when i active local network i stop to get internet connections
So the only way to get internet connection is do disable local network oufffff
any suggestions about ?
tks
Max

No i don't have wireless card in 98 computer, it have only pci network card.
Windows xp computer have on board network card, local network, and USB Planet adatptor for internet.
Forgot to say that, both compuers are connected to router1 WRT54GS, i use it just for local area network and printers
Via wileress USB Planet adaptor i want to connect to another router WRT54GS located in another building, all work nice, i get internet etc... my problem is local are, when i active it .. internet connection stop to work

Local Area Network Application

Please I am trying to write a local Area Network Application that would work for an organisation.
I intend using RMI to approach it. But I would want to know if RMI approach to network programming as any security issues. Cause i want the application to be super secure. I would have used socket but i kind of find it difficult to use socket to develop complex applications. I would also appreciate if any one could help me with a tutorial that explains in details on how to use socket to develop complex applications.
This is my email address *[removed by moderator]*.
Or you could give me a link were I can download it.
Edited by: EJP on 16/06/2012 10:41: removed your email address. These forums are for public questions and public answers. If you want a private consultant, hire one.

Well, you would use sockets to implement a complex application just as you would to implement a simple application -- only your application is going to be more complex. You wouldn't use the sockets any differently in your complex application.
To find a tutorial about how to use sockets, your web search keywords are "java socket tutorial". Choose the Oracle tutorial from the list which you get from your search engine.
As for RMI: it's implemented using sockets, as is any Java application which communicates across a network. Whether it has any security issues -- I'm no security expert, but no doubt you can use a packet sniffer to see what it's sending. And since it sends serialized Java objects, it might be possible to reverse-engineer the packet sniffer's output to inspect the contents of those objects. Whether that counts as "super secure" is up to you when you clarify the term's definition.

Local Area Mobility

I am having troubled with the local area mobility. Using two different networks over frame relay. I have setup the LAM according to the articles posted with access list, EIGRP.
I have setup a computer on network 1 with a network 2 address. Added the address to the access lists on both networks.
The computer is showing up in the IP route table on network table as a "D" code. And on network 1 showing up in the IP route table as a "M" code for mobile.
I have done a show arp and network and it is showing up there. My problem is that I can not ping the address or even get to that computer on either network.
Does anyone have any suggestions in getting this to work?

Okay I am going to try to explain what I have setup so far.
Laptop computer IP: 192.168.2.250 Subnet:255.255.255.0 Gateway 192.168.2.1
Router1 IP: 172.16.0.254 Subnet 255.255.0.0
Router2 IP: 192.168.2.1 Subnet 255.255.255.0
I have configured both routers with Local area mobility directions that cisco has provided. Put the Laptop in the router 1 subnet. Router 1 has the arp entry in its table. In the show ip route it has the entry in there as a mobile node and points back to router2.
In Router 2 the entry shows up in the ip route as D EX as was asked about in a previous message.
When I have the laptop as a local IP address I can ping it with out a problem and remote desktop to it also. The routers also can not ping the device.
I will attach part of the configs if that will help.
Is any of you currently using this?
Here is what I am trying to do with this, I have server on router1 and a backup server on router2 if for any reason that I should lose the main server i will do a rollover on the backup and it will take the IP address of the main and the users won't which system they are on.
Is there a better way of doing this? Mobile IP won't work on this cause of the system that I am using (AS/400).
So any suggestions or is anyone else doing something like what I am trying to accomplish.
Also, I have had this working when I had the routers sitting next to eachother and using the Fastethernets hooked together. So now we are going over a serial connection, could that be our problem? Does the serial support this kind of protocol? Why I question that is that all the information that I have seen is on the Fastethernet and nothing on the Serial connection.
Thank you everyone for your response in trying to solve this issue.
I have attached copies of the configs.

Local Area Connection

Every time i plug up the router it says limited or no local area connectivity
and when i put the modem back on it works so wats happening?
Model: WRT56G
I have windows xp
Message Edited by Eric11 on 11-12-2007 05:33 PM

As it shows "limited or no connectivity" on Local area connection...... it means itis not getting valid Ip address from router .....
Power cycle the router for 20-30 seconds ...... check that you are getting Ip address or not ...
If not ..... change the port from the back panel of router ......
Or lower down the card speed of Ethernet NIC to 10 Half Mbps ....
If still you are not getting valid Ip reset the router for 30-40 seconds & see whether there is any Ip address or not....

Can i be a reseller in my local area (Cambodia ) ?

I am a Cambodian and i want to buy LED and LCD direct from Sony for reselling in my local area . Is it possible that i get discount from Sony if we order it around 100 sets ?

what wrong with DBCA ..
once u installed the xpress edition ,
go to the command promt and give DBCA

Configuring UK Local Area Codes for BE3000 Site

When configuring sites for the BE3000, it is possible to define a local area code. This creates entries in the dial plan that allow users to just dial a local number with the system automatically adding the area code.
Currently (as of version 8.6.4) the BE3000 user interface requires that these local area codes are defined without the national trunk access code (i.e. the leading zero).
Examples:
Customer Location
Local Area Code
BE3000 Site Configuration
London
020
20
Bristol
0117
117
Bath
01225
1225

Hello,
I've escalated this issue and hope that we can provide better coverage for this part of the UK. A common reason for the lack of Skype #s in a particular location is often the inability of the local telco to make sufficient #s available to Skype to enable the facility to be offered.
That may or may not be the case here and a review will establish the reason.
Thank you for your informative posts.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Local Area Taxes

Similar Messages

Maybe you are looking for