Local Client Copy Error in Post-Processing

Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice. Also performed the update statistics on db.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name                  Component       Package
/SAPCND/CC_GROUP_WS_NG      AP-PRC-CON      Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
Antarpreet

Hello Gagan,
I am facing the errors in table /SAPCND/CC_GROUP_WS_NG belonging to component AP-PRC-CON. It says post processing required.
The oss note says about component FINB-TR-DERIVATION.
I am not sure whether it is good to run the steps as mentioned in oss note 1235955.
Thanks for your response and look forward to further help.
Regards,
Antarpreet

Similar Messages

  • Local Client Copy error in post processing phase

    Hello All,
    We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice.
    All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
    Table Name                  Component       Package
    /SAPCND/CC_GROUP_WS_NG      AP-PRC-CON      Post-Processing Required
    Following entires in the file logs are displayed:
    Begin of GEN_STATUS Update
    Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
    No fields in structure /1CN/WS_ID_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
    No fields in structure /1CN/WS_IS_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
    No fields in structure /1CN/WS_ED_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
    No fields in structure /1CN/WS_ES_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
    No fields in structure /1CN/WS_UI_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Begin of GEN_STATUS Update
    Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
    Can anyone guide me the best way forward.
    Thanks,
    Antarpreet

    Hi,
    You need not worry at all as this is not a warning (although marked
    so in message), and its just an information so you are better able to run
    the job RGUGBR00 in SE38 with all the options mentioned in message above
    marked.
    Regards,
    Aidan

  • Local Client Copy Error : Completed w. Dictionary Errors

    Hi,
    I have performed local client copy in the ECC 6.0 system.I mean SAP Netweaver 7.0 EHP1.I have selected source system 100 and target system 200 and profile is SAP_CUST with my User ID in 200 client having SAP_ALL,SAP_NEW.In the SCC3 throws error i,.e, Completed w. Dictionary Errors.The client 200 is newly created in the system.
    Target Client             200
    Source Client           100
    Copy Type               Local Copy
    Profile                      SAP_CUST
    Status                      Completed w. Dictionary Errors
    User                        I998769
    Start on                   06.12.2009 / 12:47:59
    Last Entry on          06.12.2009 / 14:00:12
    Statistics for this Run
    - No. of Tables            56872 of     58391
    - Deleted Lines           5705995
    - Copied Lines            5770444
    Warnings and Errors
    Table Name             Component          Package
    A001                   SD-MD-CM           DDIC Error        (See SE14)
    A004                   SD-MD-CM           DDIC Error        (See SE14)
    A005                   SD-MD-CM           DDIC Error        (See SE14)
    A006                   SD-MD-CM           DDIC Error        (See SE14)
    A007                   SD-MD-CM           DDIC Error        (See SE14)
    A009                   SD-MD-CM           DDIC Error        (See SE14)
    A010                   SD-MD-CM           DDIC Error        (See SE14)
    A012                   SD-MD-CM           DDIC Error        (See SE14)
    A015                   SD-MD-CM           DDIC Error        (See SE14)
    Nearly about 1520 tables are not copied from the source client and there is no dumps for that.Please,find below for the file log information which is highlighted in red color in log.
       Start of post-processing by application exits 13:57:48
       Automatic postprocessing of client 200 was incorrect -> long text
       Post-processing required for FINB_TR_CC_EXIT_TARGET
       Validation/substitution: Programs should be regenerated
       Selected tables           :         58.391
       Copied data in kBytes  :      2.933.491
       Deleted data in kBytes :      2.845.416
       Program ended with error or warning, return code: W
       Runtime (seconds)         :          4.333
       End of processing: 14:00:12
    Kindly,help me how to resolve the issue and provide relavent notes which is applicable to my error as per the SAP release.

    Hi,
    We encounter the same problem with different A***-tables. The problem is that these seem to be pooled tables. I had a look at sap note 1248769 and it mentions that the reconstruct-option is only liable for transparent tables. This seems to be right, as the option "Reconstruct" is greyed out in tx SE14 when we try to.
    Any other options?
    Jan
    PS. Sorry for hijacking the thread, but it seems the topic starter is still looking for an answer as well
    Edit: Found another SAP Note which seems relevant: 1171306. This note has the following segment in it:
    If you still want to remove the inconsistency, you can proceed as described in the following.  However, the table must be empty for you to be able to do this (you can check this with the report NROWS:  start the report NROWS, enter DVPOOLTEXT for "Table 1" on the selection screen and choose Execute.)
    1. Call transaction SE14.
    2. Edit DVPOOLTEXT.
    3. Delete the database table.
    4. Create a database table.
    If the pool is not empty and the data is required, it must be unloaded in advance and then read again after you have recreated the table.
    Ofcourse we would like to preserve our data in the tables. Let's take a look at an example in our system: Table A017. This table has encountered the DDIC error during client copy. We have performed the following analysis actions on it:
    Report NROWS mentions 116.390 entries for table A017.
    In SE16 table A017 has 0 entries.
    In SE14 I have performed two checks: The runtime object seems ok. When I check database object in SE14 the system returns the following message: "Table is not created in database".
    Any tips?
    Edited by: Jan Laros on Sep 8, 2010 2:25 PM

  • Local client copy Error

    I have fresh installed ECC 6.0 with HP UX. I want to do local client copy.but it give error
    lient copy from 03.02.2009 23:20:18
    ystem ID............................ QAS
    arget client........................ 900
    /3 Release.......................... 700
    Basis Support Package...............SAPKB70009
    ost................................. quality
    tart in background............. .....X
    ser................................. SAP*
    arameter
    ource client........................ 000
    ource client user masters............000
    opier profile:.......................SAP_ALL
    able selection
    ustomizing data .....................X
    ith application data................ X
    nitialize and recreate......... X
    hange documents are not copied
    est mode (without database update).. R
    thanks
    Manu

    thanks for your reply.I have set my INDIA time in 001
    But during client copy it gives  system Log
    Details Page 2 Line 9 RSLG0001 - SAP Analysis of the Central System Log       1
    Time     SAP instance   Type Nr  Clt User TCode Program Terminal Package Grp N Text
    18:16:23 quality_QAS_00 BTC  008 900 SAP*                        SBAC    BY  4 Database error 24909 at SEL access to ta
    Details
    Recording at local and central time........................ 05.02.2009 18:16:23
    Task...... Process                      User...... Terminal Session TCode Program Cl Problem cl         Package
    04523      Background Processor No. 008 SAP*                      1               K  SAP Web AS Problem SBAC
    Module nam Line SQL functi Table Name
    dbrepo     2655 SEL        REPOLOAD
    Documentation for system log message BY 4 :
    After the attempt to access a database table the database system has
    returned an error code which indicates that the operation concerned
    could not be performed successfully.
    The text of the system log message shows the error number, an
    identification of the operation and the name of the table concerned.
    The following abbreviations are used for the database operations:
    CLC - Closing a database cursor
    CRT - Creating a table on the database
    DEL - Deleting table entries
    EXE - Immediate execution of a database operation
    FET - Reading one or several records of a database cursor
    INS - Inserting one or several records into a database table
    PRE - Executing a PREPARE operation
    SEL - Executing a database selection
    UPD - Changing one or several records in a database table
    echnical details
    File Offset RecFm System log type    Grp N variable message data
       1 135000 g     Database SQL Error BY  4 24909 SELREPOLOAD                                   dbrepo  2655
    Plesae suggest
    RAJ

  • Local client copy error - Table "BKPF" not edited due to excessive number

    Hi,
    I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
    ===
    2 ETA163 Table "BKPF" not edited due to excessive number of errors
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "COEP" not edited due to excessive number of errors
    3 ETA311 Process "00002" started on server "sfrndevsap15"
    (time: "17:20:51")
    2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
    3 ETA311 Process "00003" started on server "sfrndevsap15"
    (time: "17:20:52")
    4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
    0 0 17:20:52"
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "HRP1001" not edited due to excessive number of errors
    3 ETA311 Process "00004" started on server "sfrndevsap15"
    (time: "17:20:52")
    4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
    0 29 17:21:21"
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "PCL4" not edited due to excessive number of errors
    ===
    Please help ASAP, as this is effecting our testing team.  I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client.  This is also taking quite a long time.
    Thanks in advance,
    Abdul

    Hi Abdul,
    What does your system log say ?
    Check this SAP Note
    Note 579783 - CC ERROR: Loss of data - table not copied
    run the report RSCC_VERIFY to check if the table is consistent within the source client.
    SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
    RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
    Regards,
    Siddhesh

  • Local client copy error very..very......urgent

    Hi experts,
    while i am performing local client copy in background mode from 000 to 200
    it is terminattin and it showing the below error
    Target Client           200
    Source Client                   000
    Copy Type               Local Copy
    Profile                 SAP_CUST
    Status                  Cancelled
    User                    SAP*
    Start on                10.05.2008 / 14:53:00
    Last Entry on           10.05.2008 / 14:53:51
    Statistics for this Run
    - No. of Tables                 0 of     53448
    - Copied Lines                  0
    Check System Log (SM21)
    arnings and Errors
    Table Name       Component Package
    /1FB/MD___3M0001           DDIC Error        (See SE14)
    /1FB/MD___3M0002           DDIC Error        (See SE14)
    /1FB/MD___3M0003           DDIC Error        (See SE14)
    /1FB/MD___3M0004           DDIC Error        (See SE14)
    /1FB/MD___3M0005           DDIC Error        (See SE14)
    /1FB/MD___3M0006           DDIC Error        (See SE14)
    /1FB/MD___3M0007           DDIC Error        (See SE14)
    /1FB/MD___3M0008           DDIC Error        (See SE14)
    /1FB/MD___3M0009           DDIC Error        (See SE14)
    /1FB/MD___3M000A           DDIC Error        (See SE14)
    /1FB/MD___3M000B           DDIC Error        (See SE14)
    /1FB/MD___3M000C           DDIC Error        (See SE14)
    /1FB/MD___3M000D           DDIC Error        (See SE14)
    /1FB/MD___3M000E           DDIC Error        (See SE14)
    /1FB/MD___3M000F           DDIC Error        (See SE14)
    /1FB/MD___3M000G           DDIC Error        (See SE14)
    /1FB/MD___3M000H           DDIC Error        (See SE14)
    and when i checkd in system log in sm21 it is showing
    he transaction has been terminated.  This may be caused by a
    ermination message from the application (MESSAGE Axxx) or by an
    rror detected by the SAP System due to which it makes no sense to
    roceed with the transaction.  The actual reason for the termination
    s indicated by the T100 message and the parameters.
    plz......any one can help me
    cheers
    deepak

    Actually it is problem with my database
    recently i restored my database after that i performd client copy
    when i am doing it above error showed in scc3 i checked the system log in that i found oracle error for that i reused my temp datafile using sql commands
    SQL:>alter tablespace PSAPTEMP 'path of the file' add tempfile reuse;
    finally i finished the my client copy with out any error
    regards
    deepak

  • Error in Post processing of Client Copy

    Hi,
    While doing a Client copy, i am facing an error in Post Processing step.
    Its getting hanged saying:
    "Client copy is completed with status "Post-Processing Required". There is an error in log for object FINB-TR-DERIVATION"
    Please help me out of this error.
    Regards,
    Twinkle

    Hi Twinkle,
    I got the same error while doing client copy.
    During processing of client copy there was huge workload into your system. But due to workload into the system, these tables weren't created as fast as needed by Client Copy process.
    This is the reason it failed in post processing step.
    You can go thru the note 1235955.
    Hope this will solve your problem.
    Regards,
    Habeeb

  • Need Help!! Errors during Local Client Copy

    Doing a Local Client Copy and getting these error messages in the log:
    Table Name       Component          Package
    /1CN/CMFSAPH0FOR                    DDIC Error        (See SE14)
    /1CN/CMFSAPH1FDT                    DDIC Error        (See SE14)
    /1CN/CMFSAPH1FFX                    DDIC Error        (See SE14)
    /1CN/CMFSAPH2TGR                    DDIC Error        (See SE14)
    /1CN/CMFSAPH2TRM                    DDIC Error        (See SE14)
    /1CN/CMFSAPH3TCT                    DDIC Error        (See SE14)
    /1CN/CMFSAPH3TUS                    DDIC Error        (See SE14)
    /1CN/CMFSAPH4TFX                    DDIC Error        (See SE14)
    /1CN/CMFSAPH4TQU                    DDIC Error        (See SE14)
    Then I go to SE14 then put the name of the tables then click CHECK >> DATABASE OBJECT and then as the result I get:
    "Table is not created in the database"
    If I go down to the database level and look within the Oracle database dba_tables the tables and objects exists within the database but SAP is unable to recognize them.  All objects were imported with a Oracle Data Pump dump file and now I just need help in getting SAP to recognize the tables.
    Edited by: Adam Gendle on Feb 19, 2010 12:29 AM

    Hi,
    Its showing inconsistency between ABAP Dictionary and the database.
    Have you run Test-Run before performing actual client copy ?
    Please check the Consistency of affected Tables.
    SE11 -> Display Table -> Utilities -> Database Object -> Check
    (check DB Object as well as Run time Object)
    Please refer this [SAP Note 686357 - Table pool length incorrect after Unicode conversion|https://service.sap.com/sap/support/notes/686357] to get more information. The relevant solution is mentioned there if the pool tables having inconsistency with VARDATA field.
    Also refer SAP Note 1171306 - Error with pooled tables when copying a client.
    Regards,
    Bhavik G. Shroff

  • Local client copy with warnings and errors

    Hi ,
    I am doing a local client copy and is still running . There are a few large tables which have not been copied successfully and is shown under "Warnings and Error". The tables show "Program Cancel (See SM21)". In SM21 , I find the workprocess was disconnected from the database.
    Now my questions is , once all the remaining tables complete , will I be given an option to repeat the copy for the failed tables only. The system is 6 TB and it is running for more than 15 days now.
    Please suggest.
    Regards
    Ratnajit

    will I be given an option to repeat the copy for the failed tables only
    No, it doesn't ask you to repeat copy only for failed tables.
    The system is 6 TB and it is running for more than 15 days now
    What is the requirement to do such BIG client copy?
    Regards,
    Nick Loy

  • Local Client Copy Hanged

    Hi All,
    My ERP version is ECC 6.0 DB is Oracle 10g OS: Windows.
    When i am performing Local Client Copy from 000 to 111, the copy is hanged and in SM50 it is showing
    8     BGD     3580     Running          Yes                    15158     SAPMS38L     111     SAP*     Delete     D010INC
    Log:
    3 EGZ211 Report RGCUMRSE successfully generated for databases "FILCT" "FILCA"
    In the log above is the last line and hereafter it is not going further. In the log it is not showing any error.
    Please analyse this.
    Regards,
    Praveen Merugu

    Hi
    Client Copy process is require to lock the source client while copying and How long the process running ?
    Regards
    Anwer Waseem
    SAP BASIS

  • Local client copy running from long time

    Hi Experts,
    The local client copy is running from very long time at the phase "Post Processing"(since 14 hrs).
    and our database size is 971.5 GB.
    Could some body help me , generally how much time it will take to complete this phase,
    and really if some thing is going wrong could you please where to check why its taking this much time.
    Current screen shot:
    Target Client                400
    Source Client (incl. Auth.)  500
       Source Client User Master 500
    Copy Type                    Local Copy
    Profile                      SAP_ALL
    -  Restart                   X
    Status                       Processing (Restart)...
    User                         SAP*
    Start on                     14.03.2011 / 10:10:11
    Last Entry on                15.03.2011 / 22:06:46
    Current Action:              Post Processing         Component
    -  Last Exit Program         RSSOUSCO_FOR_CC         BC-SRV-GBT
    Statistics for this Run
    - No. of Tables (Total)          55537 of     55852
    - In This Run                        0 of       315
    - Previously Copied Tables       55537
    - Deleted Lines               39542230
    - Copied Lines               300488666
    Thanks in advance.
    Suresh Babu

    Hi,
    As sunny explained.. there is lot of factors involved in Client copy.
    1) Database Size
    2) Tables
    3) System Resources
    You can exclude the tables in client copy if you really dont need the data of tha particular tables while scheduling the client copy.
    any way we could see that  No. of Tables (Total) 55537 of 55852 copied.. it's almost done 300+ tables are there to copy.
    -Srini

  • Client Copy Error - ERROR: Type 'F' user exit with SYS_ERROR:

    Hello,
    We want to create a client copy from client 001 to clien 715.
    The client copy test runs successfully.
    The following error occurs in normal mode of client copy.
    1 ETA028XClient copy from "03.11.2010" "17:12:43"
    1 ETA029 System ID............................ "IS3"
    1 ETA043 Target client........................ "715"
    1 ETA030 R/3 Release.......................... "701"
    1 ETA354   Basis Support Package..............."SAPKB70107"
    1 ETA031 Host................................. "xxx"
    1 ETA000 Start in background............. ....." "
    1 ETA032 User................................. "SAP*"
    1 ETA033 Parameter
    1 ETA034 Source client........................ "001"
    1 ETA188 Source client user masters............"001"
    1 ETA185 Copier profile:......................."SAP_ALL"
    1 ETA036 Table selection
    1 ETA177 Customizing data ....................."X"
    1 ETA037 With application data................ "X"
    1 ETA155 Initialize and recreate......... "X"
    1 ETA294 Change documents are not copied
    2 ETA367XStart analysis of system "17:12:43"
    3 ETA108 "/GC1/CC_EXIT_CLIENT_DELETION" executed "        0"("        0") entries copied
    4 ETA114 Runtime "             0" seconds
    3 ETA072 Exit program "/GC1/CC_EXIT_CLIENT_DELETION" successfully executed "17:12:53"
    A2EE/SAPAPO/OM 012 "Mandant 715:" "Verbindung nicht oder fehlerhaft gepflegt:" "IS3CLNT001" " "
    2 ETA102 ERROR: Type 'F' user exit with SYS_ERROR: "/SAPAPO/OM_CLNT_COPY_DOWNLOAD"
    2 ETA534 "RCOD:" " 8" "SY-SUBRC:" " 0"
    2 ETA191 Program ended abnormally
    Can you help me?
    thx
    Torsten

    Torsten,
    Are you doing a local client copy in a SCM System. I can see it fails & is looking for SCM specific fn modules & user exits.
    If yes, has a look at this notes there are some steps that needs to be done for the transactional date:
    894490 - Client copy: Transactional data
    And re-post it in the SCM forum: SAP Advanced Planning & Optimization (SAP APO)
    - Regards, Dibya

  • Local client copy not starting

    hi... all
    i have started a local client copy but after taking 3 hour it not start copy
    in sm12 , it shows 2 entries r lock, i have deleted these entries and stop/start mmc. try again local client copy, same enteries r lock in sm12
    plz guide me
    Best Regard
    Imran

    after 13 hour the status is given below
    In scc3
    Target Client           200
    Source Client           100
    Copy Type               Local Copy
    Profile                 SAP_CUST
    Status                  Processing...
    User                    SAP*
    Start on                28.05.2009 / 20:08:24
    Last Entry on           28.05.2009 / 20:09:53
    Statistics for this Run
    - No. of Tables                 0 of     54540
    - Copied Lines                  0
    In sm12
    200     SAP*     28.05.2009 E     RSTABLE CLIENT COPY SOURCE   100     0     1
    200     SAP*     28.05.2009     E     RSTABLE     RSCLICOPY       200     0     1
    In sm66
    Server Name No. Type PID Status Reason Sem Start Error CPU Time User     Report 
    devsap_DEV_00 12 BTC 4324 Running             Yes                  52043 SAP* CL_SQL_S
    in sm50
    No.       type        PID       status     start time      report client user report table
    0         DIA     4252     Waiting Yes                         
    1         DIA     4260     Running Yes     SAPLTHFB     200     SAP*     
    2     DIA     4984     Waiting Yes                         
    3     DIA     4272     Waiting Yes                         
    4     DIA     1188     Waiting Yes                         
    5     DIA     4284     Waiting Yes                         
    6     DIA     4288     Waiting Yes                         
    7     DIA     4292     Waiting Yes                         
    8     DIA     4304     Waiting Yes                         
    9     DIA     4968     Waiting Yes                         
    10     UPD     4976     Waiting Yes                         
    11     ENQ     4940     Waiting Yes                         
    12     BGD     4324     Running Yes  52332 CL_SQL_STATEMENT-CP 200     SAP*

  • Condition record's not getting copied in local client copy !!!

    Hi ALL,
    I have a one question/doubt regarding local client copy.
    Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
    I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
    I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
    Message no. VJ000u201D
    Can u pls suggest proper way to copy/transport condition record in new client created?
    Regards,
    C  Singh.

    Please refer below link
    http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
    Regards,
    Pavan

  • Local Client Copy taking too much time

    Hi All,
    I recently done a system refresh of my Quality server (restore PRD backup to QUA Server)
    After that I have created a new client and has initiated a local client copy after the test run
    went successful.
    Then after reading approximately 4500 table it has got stuck and I saw in SM50 that table "ACCTCR"
    was running since approximately 56000 seconds.
    Then I run the program 'BTCTRNS1" to clean the work processes.
    After that I again restarted the local client copy in restart mode.
    Now since last 3 hours I can see in SM50 that table u201CACCTCR" is being sequentially ready for approx 500(under Actions) seconds and then delete for 15 seconds (under actions).
    I also found that table size is also not increasing as well as same table is being sequentially read for 500 sec and then deleted for 15 seconds (under Actions in sm50) and program is also same.
    This is happening since last 3 hours now.
    Under SCC3 I can see the status as processing reset.
    Does anyone face this issue ever? And can anyone suggest is everything is running OK or there is
    some problem.
    Your suggestions will be highly appreciated.
    Regards,
    PG

    Hello,
    Did you recalculate full DB statistics after the last system copy from PRD to QA ?
    This is very often forgotten, leading to long elapse times in select statements.
    Check via DB20 on table ACCTCR from when latest DB statistics date.
    Eventually rebuild all indexes from ACCTCR, this can be done online via ABAP RSANAORA if you are running Oracle.
    You can also perform an SQL trace on the current running process to see if the select from the client copy is running correctly.
    I also know that ACCTCR is a table containing transactional data and most of the time it contains a lot of data.
    II suppose you are running a client copy with profile SAP_ALL on QA based on a copy of PRD ?
    This means that you will end up with 2 production clients in QA ?
    Is your QA system sized for this ?
    Another question that you can ask your client, is data from ACCTCR really needed on QA on both clients.
    If not it is maybe better to start an archiving based on SAP Note :
    Note 83076 - MM_ACCTIT: Archiving programs for ACCTIT, ACCTHD, ACCTCR
    Followed by a new client copy.
    Success.
    Wim

Maybe you are looking for

  • CASE STRUCTURES WITH TAB CONTROL

    Hi, I have created  tab controlled  case structures for three different cases, Tablet type Machine Input Output It seems that data is not interlinked while switching betweeen the cases. I have to select the start buttun for each tab to get results.An

  • How to remove EA in Quantity Key Figure

    Hi, I want to remove "EA" from the key figure  10EA (Billing Quantity in Sales Units). Can anybody help me please. Thanks&Regards, Rafi

  • Showing iViews with Web Page Composer

    Hi guys,   I have to use iViews in a Web Page in Web Page Composer. I was searching some info in snd but  i couldn't find anything about it.   Can somebody help me? Best regards.

  • Need someone with PP CS3 on PC to convert project file

    Hi, I'm hoping someone can help me out.  I have an old project that was cut on Premiere Pro CS2 on a PC.  Now I'm on a Mac with Premiere Pro CS3 and I need to update the project.  So, I need someone that has Premiere Pro CS3 on a PC to open my projec

  • How can I reinstall Iphoto if the installation is aborted?

    I just bought Iphoto 9.2.1 from Apple store and I installed it on my Mac  OS X 10.6.8. When I launch Iphoto I receive the following error message: Dyld Error Message:   Library not loaded: /Library/Frameworks/NyxAudioAnalysis.framework/Versions/A/Nyx