Local client copy error - Table "BKPF" not edited due to excessive number

Hi,
I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
===
2 ETA163 Table "BKPF" not edited due to excessive number of errors
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "COEP" not edited due to excessive number of errors
3 ETA311 Process "00002" started on server "sfrndevsap15"
(time: "17:20:51")
2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
3 ETA311 Process "00003" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
0 0 17:20:52"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "HRP1001" not edited due to excessive number of errors
3 ETA311 Process "00004" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
0 29 17:21:21"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "PCL4" not edited due to excessive number of errors
===
Please help ASAP, as this is effecting our testing team. I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client. This is also taking quite a long time.
Thanks in advance,
Abdul

Hi Abdul,
What does your system log say ?
Check this SAP Note
Note 579783 - CC ERROR: Loss of data - table not copied
run the report RSCC_VERIFY to check if the table is consistent within the source client.
SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
Regards,
Siddhesh

Similar Messages

Local Client Copy Error : Completed w. Dictionary Errors

Hi,
I have performed local client copy in the ECC 6.0 system.I mean SAP Netweaver 7.0 EHP1.I have selected source system 100 and target system 200 and profile is SAP_CUST with my User ID in 200 client having SAP_ALL,SAP_NEW.In the SCC3 throws error i,.e, Completed w. Dictionary Errors.The client 200 is newly created in the system.
Target Client             200
Source Client           100
Copy Type               Local Copy
Profile                      SAP_CUST
Status                      Completed w. Dictionary Errors
User                        I998769
Start on                   06.12.2009 / 12:47:59
Last Entry on          06.12.2009 / 14:00:12
Statistics for this Run
- No. of Tables            56872 of     58391
- Deleted Lines           5705995
- Copied Lines            5770444
Warnings and Errors
Table Name             Component          Package
A001                   SD-MD-CM           DDIC Error        (See SE14)
A004                   SD-MD-CM           DDIC Error        (See SE14)
A005                   SD-MD-CM           DDIC Error        (See SE14)
A006                   SD-MD-CM           DDIC Error        (See SE14)
A007                   SD-MD-CM           DDIC Error        (See SE14)
A009                   SD-MD-CM           DDIC Error        (See SE14)
A010                   SD-MD-CM           DDIC Error        (See SE14)
A012                   SD-MD-CM           DDIC Error        (See SE14)
A015                   SD-MD-CM           DDIC Error        (See SE14)
Nearly about 1520 tables are not copied from the source client and there is no dumps for that.Please,find below for the file log information which is highlighted in red color in log.
   Start of post-processing by application exits 13:57:48
   Automatic postprocessing of client 200 was incorrect -> long text
   Post-processing required for FINB_TR_CC_EXIT_TARGET
   Validation/substitution: Programs should be regenerated
   Selected tables           :         58.391
   Copied data in kBytes :      2.933.491
   Deleted data in kBytes :      2.845.416
   Program ended with error or warning, return code: W
   Runtime (seconds)         :          4.333
   End of processing: 14:00:12
Kindly,help me how to resolve the issue and provide relavent notes which is applicable to my error as per the SAP release.

Hi,
We encounter the same problem with different A***-tables. The problem is that these seem to be pooled tables. I had a look at sap note 1248769 and it mentions that the reconstruct-option is only liable for transparent tables. This seems to be right, as the option "Reconstruct" is greyed out in tx SE14 when we try to.
Any other options?
Jan
PS. Sorry for hijacking the thread, but it seems the topic starter is still looking for an answer as well
Edit: Found another SAP Note which seems relevant: 1171306. This note has the following segment in it:
If you still want to remove the inconsistency, you can proceed as described in the following. However, the table must be empty for you to be able to do this (you can check this with the report NROWS: start the report NROWS, enter DVPOOLTEXT for "Table 1" on the selection screen and choose Execute.)
1. Call transaction SE14.
2. Edit DVPOOLTEXT.
3. Delete the database table.
4. Create a database table.
If the pool is not empty and the data is required, it must be unloaded in advance and then read again after you have recreated the table.
Ofcourse we would like to preserve our data in the tables. Let's take a look at an example in our system: Table A017. This table has encountered the DDIC error during client copy. We have performed the following analysis actions on it:
Report NROWS mentions 116.390 entries for table A017.
In SE16 table A017 has 0 entries.
In SE14 I have performed two checks: The runtime object seems ok. When I check database object in SE14 the system returns the following message: "Table is not created in database".
Any tips?
Edited by: Jan Laros on Sep 8, 2010 2:25 PM

Local client copy Error

I have fresh installed ECC 6.0 with HP UX. I want to do local client copy.but it give error
lient copy from 03.02.2009 23:20:18
ystem ID............................ QAS
arget client........................ 900
/3 Release.......................... 700
Basis Support Package...............SAPKB70009
ost................................. quality
tart in background............. .....X
ser................................. SAP*
arameter
ource client........................ 000
ource client user masters............000
opier profile:.......................SAP_ALL
able selection
ustomizing data .....................X
ith application data................ X
nitialize and recreate......... X
hange documents are not copied
est mode (without database update).. R
thanks
Manu

thanks for your reply.I have set my INDIA time in 001
But during client copy it gives system Log
Details Page 2 Line 9 RSLG0001 - SAP Analysis of the Central System Log       1
Time     SAP instance   Type Nr Clt User TCode Program Terminal Package Grp N Text
18:16:23 quality_QAS_00 BTC 008 900 SAP*                        SBAC    BY 4 Database error 24909 at SEL access to ta
Details
Recording at local and central time........................ 05.02.2009 18:16:23
Task...... Process                      User...... Terminal Session TCode Program Cl Problem cl         Package
04523      Background Processor No. 008 SAP*                      1               K SAP Web AS Problem SBAC
Module nam Line SQL functi Table Name
dbrepo     2655 SEL        REPOLOAD
Documentation for system log message BY 4 :
After the attempt to access a database table the database system has
returned an error code which indicates that the operation concerned
could not be performed successfully.
The text of the system log message shows the error number, an
identification of the operation and the name of the table concerned.
The following abbreviations are used for the database operations:
CLC - Closing a database cursor
CRT - Creating a table on the database
DEL - Deleting table entries
EXE - Immediate execution of a database operation
FET - Reading one or several records of a database cursor
INS - Inserting one or several records into a database table
PRE - Executing a PREPARE operation
SEL - Executing a database selection
UPD - Changing one or several records in a database table
echnical details
File Offset RecFm System log type    Grp N variable message data
   1 135000 g     Database SQL Error BY 4 24909 SELREPOLOAD                                   dbrepo 2655
Plesae suggest
RAJ

Local Client Copy Error in Post-Processing

Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice. Also performed the update statistics on db.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
Antarpreet

Hello Gagan,
I am facing the errors in table /SAPCND/CC_GROUP_WS_NG belonging to component AP-PRC-CON. It says post processing required.
The oss note says about component FINB-TR-DERIVATION.
I am not sure whether it is good to run the steps as mentioned in oss note 1235955.
Thanks for your response and look forward to further help.
Regards,
Antarpreet

Local Client Copy error in post processing phase

Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
Antarpreet

Hi,
You need not worry at all as this is not a warning (although marked
so in message), and its just an information so you are better able to run
the job RGUGBR00 in SE38 with all the options mentioned in message above
marked.
Regards,
Aidan

Local client copy error very..very......urgent

Hi experts,
while i am performing local client copy in background mode from 000 to 200
it is terminattin and it showing the below error
Target Client           200
Source Client                   000
Copy Type               Local Copy
Profile                 SAP_CUST
Status                  Cancelled
User                    SAP*
Start on                10.05.2008 / 14:53:00
Last Entry on           10.05.2008 / 14:53:51
Statistics for this Run
- No. of Tables                 0 of     53448
- Copied Lines                  0
Check System Log (SM21)
arnings and Errors
Table Name       Component Package
/1FB/MD___3M0001           DDIC Error        (See SE14)
/1FB/MD___3M0002           DDIC Error        (See SE14)
/1FB/MD___3M0003           DDIC Error        (See SE14)
/1FB/MD___3M0004           DDIC Error        (See SE14)
/1FB/MD___3M0005           DDIC Error        (See SE14)
/1FB/MD___3M0006           DDIC Error        (See SE14)
/1FB/MD___3M0007           DDIC Error        (See SE14)
/1FB/MD___3M0008           DDIC Error        (See SE14)
/1FB/MD___3M0009           DDIC Error        (See SE14)
/1FB/MD___3M000A           DDIC Error        (See SE14)
/1FB/MD___3M000B           DDIC Error        (See SE14)
/1FB/MD___3M000C           DDIC Error        (See SE14)
/1FB/MD___3M000D           DDIC Error        (See SE14)
/1FB/MD___3M000E           DDIC Error        (See SE14)
/1FB/MD___3M000F           DDIC Error        (See SE14)
/1FB/MD___3M000G           DDIC Error        (See SE14)
/1FB/MD___3M000H           DDIC Error        (See SE14)
and when i checkd in system log in sm21 it is showing
he transaction has been terminated. This may be caused by a
ermination message from the application (MESSAGE Axxx) or by an
rror detected by the SAP System due to which it makes no sense to
roceed with the transaction. The actual reason for the termination
s indicated by the T100 message and the parameters.
plz......any one can help me
cheers
deepak

Actually it is problem with my database
recently i restored my database after that i performd client copy
when i am doing it above error showed in scc3 i checked the system log in that i found oracle error for that i reused my temp datafile using sql commands
SQL:>alter tablespace PSAPTEMP 'path of the file' add tempfile reuse;
finally i finished the my client copy with out any error
regards
deepak

Local client copy profile SAP_CUSV: Configuration not working

Dear Experts,
My configuration client is 350 and my new client is 100 in same DEV system. Client 100 is copied from client 000 with profile SAP_ALL. Then I created a local copy from 350 using profile SAP_CUSV into same client 100. After that I am facing issues under HCM module. All the HCM configuration that works well in 350 does not work in client 100 even the standard header configuration of PA30 does not work. All the customizing entries are however present in HCM configuration tables but system seems not to read anything from HCM configuration. Apart from screen headers, the configuration done by consultant also has conflicts and system shows an error to maintain entries in tables which are already maintained and visible in configuration tables in 100. An example of error in which system gives error of maintaining Payscale Type and Payscale Area in table T510 is attached where as the entries are maintained in given table.
Best Regards,

Hi,
Please check the following notes.
1946003 - Client copy completed with Dictionary error
1171306 - Error with pooled tables when copying a client
686357 - Table pool has incorrect length following Unicode conversion
Please close the thread if this address your issues.
Thanks
Adil

Client copy error: Table logging in program RSCLXCOP disabled by user

Hi,
While doing client export from a system, I am getting the below error in test run:
Table logging in program RSCLXCOP disabled by user
Kindly advice.
Thanks & regards,
Kunal Patel.

Hi
Note 446485 - CC-ADMIN: Special copying options
It would help you out, but do check double time.

Need Help!! Errors during Local Client Copy

Doing a Local Client Copy and getting these error messages in the log:
Table Name       Component          Package
/1CN/CMFSAPH0FOR                    DDIC Error        (See SE14)
/1CN/CMFSAPH1FDT                    DDIC Error        (See SE14)
/1CN/CMFSAPH1FFX                    DDIC Error        (See SE14)
/1CN/CMFSAPH2TGR                    DDIC Error        (See SE14)
/1CN/CMFSAPH2TRM                    DDIC Error        (See SE14)
/1CN/CMFSAPH3TCT                    DDIC Error        (See SE14)
/1CN/CMFSAPH3TUS                    DDIC Error        (See SE14)
/1CN/CMFSAPH4TFX                    DDIC Error        (See SE14)
/1CN/CMFSAPH4TQU                    DDIC Error        (See SE14)
Then I go to SE14 then put the name of the tables then click CHECK >> DATABASE OBJECT and then as the result I get:
"Table is not created in the database"
If I go down to the database level and look within the Oracle database dba_tables the tables and objects exists within the database but SAP is unable to recognize them. All objects were imported with a Oracle Data Pump dump file and now I just need help in getting SAP to recognize the tables.
Edited by: Adam Gendle on Feb 19, 2010 12:29 AM

Hi,
Its showing inconsistency between ABAP Dictionary and the database.
Have you run Test-Run before performing actual client copy ?
Please check the Consistency of affected Tables.
SE11 -> Display Table -> Utilities -> Database Object -> Check
(check DB Object as well as Run time Object)
Please refer this [SAP Note 686357 - Table pool length incorrect after Unicode conversion|https://service.sap.com/sap/support/notes/686357] to get more information. The relevant solution is mentioned there if the pool tables having inconsistency with VARDATA field.
Also refer SAP Note 1171306 - Error with pooled tables when copying a client.
Regards,
Bhavik G. Shroff

Local client copy with warnings and errors

Hi ,
I am doing a local client copy and is still running . There are a few large tables which have not been copied successfully and is shown under "Warnings and Error". The tables show "Program Cancel (See SM21)". In SM21 , I find the workprocess was disconnected from the database.
Now my questions is , once all the remaining tables complete , will I be given an option to repeat the copy for the failed tables only. The system is 6 TB and it is running for more than 15 days now.
Please suggest.
Regards
Ratnajit

will I be given an option to repeat the copy for the failed tables only
No, it doesn't ask you to repeat copy only for failed tables.
The system is 6 TB and it is running for more than 15 days now
What is the requirement to do such BIG client copy?
Regards,
Nick Loy

Local client copy not starting

hi... all
i have started a local client copy but after taking 3 hour it not start copy
in sm12 , it shows 2 entries r lock, i have deleted these entries and stop/start mmc. try again local client copy, same enteries r lock in sm12
plz guide me
Best Regard
Imran

after 13 hour the status is given below
In scc3
Target Client           200
Source Client           100
Copy Type               Local Copy
Profile                 SAP_CUST
Status                  Processing...
User                    SAP*
Start on                28.05.2009 / 20:08:24
Last Entry on           28.05.2009 / 20:09:53
Statistics for this Run
- No. of Tables                 0 of     54540
- Copied Lines                  0
In sm12
200     SAP*     28.05.2009 E     RSTABLE CLIENT COPY SOURCE   100     0     1
200     SAP*     28.05.2009     E     RSTABLE     RSCLICOPY       200     0     1
In sm66
Server Name No. Type PID Status Reason Sem Start Error CPU Time User     Report
devsap_DEV_00 12 BTC 4324 Running             Yes                  52043 SAP* CL_SQL_S
in sm50
No.       type        PID       status     start time      report client user report table
0         DIA     4252     Waiting Yes
1         DIA     4260     Running Yes     SAPLTHFB     200     SAP*
2     DIA     4984     Waiting Yes
3     DIA     4272     Waiting Yes
4     DIA     1188     Waiting Yes
5     DIA     4284     Waiting Yes
6     DIA     4288     Waiting Yes
7     DIA     4292     Waiting Yes
8     DIA     4304     Waiting Yes
9     DIA     4968     Waiting Yes
10     UPD     4976     Waiting Yes
11     ENQ     4940     Waiting Yes
12     BGD     4324     Running Yes 52332 CL_SQL_STATEMENT-CP 200     SAP*

Condition record's not getting copied in local client copy !!!

Hi ALL,
I have a one question/doubt regarding local client copy.
Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
Message no. VJ000u201D
Can u pls suggest proper way to copy/transport condition record in new client created?
Regards,
C Singh.

Please refer below link
http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
Regards,
Pavan

Can not perform local client copy

Hi Expert,
I am not able to perform the local client copy for newly created on production server as system not accepting standard password 'PASS' for user SAP*.
Same is working fine at IDES server.
Please help
Thanks
Gaurav

Hi,
Make sure there's a profile parameter: login/no_automatic_user_sapstar = 0 and then restarted?
U can change the parameter by:
Execute T-Code RZ10 and the select default.pfl form the list of profiles avaialable
then go to edit mode and then click on create
Give the name of the parameter and its value and then save the profile
then it will ask you to activate the profile, Now just click on Ok, it will done
Restart the system and it will work fine.
Or
Just go to RZ10>>>>select instance profile>>>>extended maintanance>>>>change>>>>change the value for parameter>>>>>copy>>>>back>>>>>save&activate
Thanks
Ruchika
Edited by: Ruchika Kapoor on Aug 17, 2009 1:58 PM

Local client copy not working

I m trying to do local client copy from 000 to 400 while it has given error that RFC needs to created for FINBASIS component. After searching the net i come across that to do that we need to implement note 568784. However while uploading note from desktop it is giving ABAP Short dump
Runtime Errors : CONVT_NO_NUMBER in progarm SAPLSCWU
any help apprecited
regards
mangesh

This note doesn't actually require that you upload it. In fact, all you really need to do is create the RFC destination (as directed within the note) and then run transaction FINB_TR_DEST.
Hope that helps.
J. Haynes

Inconsistant transport requests after local client copy

Dear experts,
our IT department just made a local client copy with profile SAP_ALL, by which all the transport requests had been copied, too, including quite a lot of workbench and customizing orders in status changeable. I'm supposed to do some basic setup and cleanup in the new client, but I'm confronted with problems like objects being locked in orders/requests that cannot be changed in the new client, as they belong to the original source client.
How can I get rid of those inconsistencies? I'd preferred the new client without transports and without locked objects. Is it really necessary that I clean up this mess manually? Would it have been better to clean this up before the client copy? Or could we just do the client copy with another profile in order to avoid those problems?
Thanks for your appreciated help
Andreas

Hello,
Transports are NEVER part of a client copy.
In fact all the data of your transports is stored in tables that are client independent (E07* tables).
This means that you can view (not edit) always all transports from all clients in a specific system.
When you want to edit or release a transport the source client is important (in which client was the transport originally created).
This is stored in table E070C for all transports and can not be overruled.
So I recommend that you don't clean anything related to transports after a client copy because this will also impact the other clients !
Success.
Wim

Local client copy error - Table "BKPF" not edited due to excessive number

Similar Messages

Maybe you are looking for