Local client copy giving trouble SAP ECC 6.0

Hello All,
I installed SAP ecc 6.0 Implementation version. Then created 100 client as Development and 200 client as Golden client.
Our Functional people are using 100 client for development activities.
Now Functional people need sand box client 300.
Created 300 client by using 000 client, user ddic. Using transaction scc4.
Logged on with 300 client, user sap*, p/w pass. Gone to sccl transaction trying to copy 100 client data to 300 client.
BUT IT IS SHOWING
Runtime Errors            TIME_OUT
Date and Time              10.01.2008 11:12:12
Shot dump has not been completely stored ( too big)
Short text -
Time Limit exceeded.
What happened?
The program SAPLSDBI_DYNSQL has exceeded the maximum permitted runtime with out interruption and has therefore been terminated
VIRTUAL MEMORY PROBLEM I AM GETTING, TRY TO GIVE THE SOLUTION FOR SOLVING THE ISSUE.
Regards,
Sateesh

Hi Sateesh,
Increase the number of parallel jobs for the client copy before executing background mode.
Regards,
Tolulope
Edited by: Tolulope OKUSAGA on Jan 19, 2008 12:58 PM

Similar Messages

Condition record's not getting copied in local client copy !!!

Hi ALL,
I have a one question/doubt regarding local client copy.
Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
Message no. VJ000u201D
Can u pls suggest proper way to copy/transport condition record in new client created?
Regards,
C Singh.

Please refer below link
http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
Regards,
Pavan

Local client copy Error

I have fresh installed ECC 6.0 with HP UX. I want to do local client copy.but it give error
lient copy from 03.02.2009 23:20:18
ystem ID............................ QAS
arget client........................ 900
/3 Release.......................... 700
Basis Support Package...............SAPKB70009
ost................................. quality
tart in background............. .....X
ser................................. SAP*
arameter
ource client........................ 000
ource client user masters............000
opier profile:.......................SAP_ALL
able selection
ustomizing data .....................X
ith application data................ X
nitialize and recreate......... X
hange documents are not copied
est mode (without database update).. R
thanks
Manu

thanks for your reply.I have set my INDIA time in 001
But during client copy it gives system Log
Details Page 2 Line 9 RSLG0001 - SAP Analysis of the Central System Log       1
Time     SAP instance   Type Nr Clt User TCode Program Terminal Package Grp N Text
18:16:23 quality_QAS_00 BTC 008 900 SAP*                        SBAC    BY 4 Database error 24909 at SEL access to ta
Details
Recording at local and central time........................ 05.02.2009 18:16:23
Task...... Process                      User...... Terminal Session TCode Program Cl Problem cl         Package
04523      Background Processor No. 008 SAP*                      1               K SAP Web AS Problem SBAC
Module nam Line SQL functi Table Name
dbrepo     2655 SEL        REPOLOAD
Documentation for system log message BY 4 :
After the attempt to access a database table the database system has
returned an error code which indicates that the operation concerned
could not be performed successfully.
The text of the system log message shows the error number, an
identification of the operation and the name of the table concerned.
The following abbreviations are used for the database operations:
CLC - Closing a database cursor
CRT - Creating a table on the database
DEL - Deleting table entries
EXE - Immediate execution of a database operation
FET - Reading one or several records of a database cursor
INS - Inserting one or several records into a database table
PRE - Executing a PREPARE operation
SEL - Executing a database selection
UPD - Changing one or several records in a database table
echnical details
File Offset RecFm System log type    Grp N variable message data
   1 135000 g     Database SQL Error BY 4 24909 SELREPOLOAD                                   dbrepo 2655
Plesae suggest
RAJ

Local Client Copy Error : Completed w. Dictionary Errors

Hi,
I have performed local client copy in the ECC 6.0 system.I mean SAP Netweaver 7.0 EHP1.I have selected source system 100 and target system 200 and profile is SAP_CUST with my User ID in 200 client having SAP_ALL,SAP_NEW.In the SCC3 throws error i,.e, Completed w. Dictionary Errors.The client 200 is newly created in the system.
Target Client             200
Source Client           100
Copy Type               Local Copy
Profile                      SAP_CUST
Status                      Completed w. Dictionary Errors
User                        I998769
Start on                   06.12.2009 / 12:47:59
Last Entry on          06.12.2009 / 14:00:12
Statistics for this Run
- No. of Tables            56872 of     58391
- Deleted Lines           5705995
- Copied Lines            5770444
Warnings and Errors
Table Name             Component          Package
A001                   SD-MD-CM           DDIC Error        (See SE14)
A004                   SD-MD-CM           DDIC Error        (See SE14)
A005                   SD-MD-CM           DDIC Error        (See SE14)
A006                   SD-MD-CM           DDIC Error        (See SE14)
A007                   SD-MD-CM           DDIC Error        (See SE14)
A009                   SD-MD-CM           DDIC Error        (See SE14)
A010                   SD-MD-CM           DDIC Error        (See SE14)
A012                   SD-MD-CM           DDIC Error        (See SE14)
A015                   SD-MD-CM           DDIC Error        (See SE14)
Nearly about 1520 tables are not copied from the source client and there is no dumps for that.Please,find below for the file log information which is highlighted in red color in log.
   Start of post-processing by application exits 13:57:48
   Automatic postprocessing of client 200 was incorrect -> long text
   Post-processing required for FINB_TR_CC_EXIT_TARGET
   Validation/substitution: Programs should be regenerated
   Selected tables           :         58.391
   Copied data in kBytes :      2.933.491
   Deleted data in kBytes :      2.845.416
   Program ended with error or warning, return code: W
   Runtime (seconds)         :          4.333
   End of processing: 14:00:12
Kindly,help me how to resolve the issue and provide relavent notes which is applicable to my error as per the SAP release.

Hi,
We encounter the same problem with different A***-tables. The problem is that these seem to be pooled tables. I had a look at sap note 1248769 and it mentions that the reconstruct-option is only liable for transparent tables. This seems to be right, as the option "Reconstruct" is greyed out in tx SE14 when we try to.
Any other options?
Jan
PS. Sorry for hijacking the thread, but it seems the topic starter is still looking for an answer as well
Edit: Found another SAP Note which seems relevant: 1171306. This note has the following segment in it:
If you still want to remove the inconsistency, you can proceed as described in the following. However, the table must be empty for you to be able to do this (you can check this with the report NROWS: start the report NROWS, enter DVPOOLTEXT for "Table 1" on the selection screen and choose Execute.)
1. Call transaction SE14.
2. Edit DVPOOLTEXT.
3. Delete the database table.
4. Create a database table.
If the pool is not empty and the data is required, it must be unloaded in advance and then read again after you have recreated the table.
Ofcourse we would like to preserve our data in the tables. Let's take a look at an example in our system: Table A017. This table has encountered the DDIC error during client copy. We have performed the following analysis actions on it:
Report NROWS mentions 116.390 entries for table A017.
In SE16 table A017 has 0 entries.
In SE14 I have performed two checks: The runtime object seems ok. When I check database object in SE14 the system returns the following message: "Table is not created in database".
Any tips?
Edited by: Jan Laros on Sep 8, 2010 2:25 PM

Local client copy error - Table "BKPF" not edited due to excessive number

Hi,
I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
===
2 ETA163 Table "BKPF" not edited due to excessive number of errors
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "COEP" not edited due to excessive number of errors
3 ETA311 Process "00002" started on server "sfrndevsap15"
(time: "17:20:51")
2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
3 ETA311 Process "00003" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
0 0 17:20:52"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "HRP1001" not edited due to excessive number of errors
3 ETA311 Process "00004" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
0 29 17:21:21"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "PCL4" not edited due to excessive number of errors
===
Please help ASAP, as this is effecting our testing team. I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client. This is also taking quite a long time.
Thanks in advance,
Abdul

Hi Abdul,
What does your system log say ?
Check this SAP Note
Note 579783 - CC ERROR: Loss of data - table not copied
run the report RSCC_VERIFY to check if the table is consistent within the source client.
SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
Regards,
Siddhesh

Local Client Copy Hanged

Hi All,
My ERP version is ECC 6.0 DB is Oracle 10g OS: Windows.
When i am performing Local Client Copy from 000 to 111, the copy is hanged and in SM50 it is showing
8 BGD 3580 Running Yes 15158 SAPMS38L 111 SAP* Delete D010INC
Log:
3 EGZ211 Report RGCUMRSE successfully generated for databases "FILCT" "FILCA"
In the log above is the last line and hereafter it is not going further. In the log it is not showing any error.
Please analyse this.
Regards,
Praveen Merugu

Hi
Client Copy process is require to lock the source client while copying and How long the process running ?
Regards
Anwer Waseem
SAP BASIS

Compile after local client copy

Hi guys,
We noticed that SAP ECC 6 will compile some stuff again after a local client copy. e.g. when we launch MM01 in the newly created client (by copy) it compiles again. The transaction has been run in the source client.
Is this normal? Can we limit these compiling actions by a specific sgen task? Which one? Regenerate after an SAP System Upgrade?
Thanks in advance!

Hello Juan,
So far I have not even once done SGEN after a client copy. SGEN is needed only after a fresh installation, SAP upgrade and support package import. This is when we are doing SGEN. SGEN is needed only when either the object is new or has got modified. Infact regeneration of programs also happens after transport imports which carry program changes.
Though nothing wrong in doing SGEN after client copy. Can be done if you wish.
In this case it might be that the system we are talkign about may be a totally new system where SGEN has not been run even once.
Hello R. Van der Veen ,
Please confirm that you were using the system in past without this MM01 delay issue.
Also SGEn is system specific. Nothing to do with client.
Regards.
Ruchit.

Local Client Copy taking too much time

Hi All,
I recently done a system refresh of my Quality server (restore PRD backup to QUA Server)
After that I have created a new client and has initiated a local client copy after the test run
went successful.
Then after reading approximately 4500 table it has got stuck and I saw in SM50 that table "ACCTCR"
was running since approximately 56000 seconds.
Then I run the program 'BTCTRNS1" to clean the work processes.
After that I again restarted the local client copy in restart mode.
Now since last 3 hours I can see in SM50 that table u201CACCTCR" is being sequentially ready for approx 500(under Actions) seconds and then delete for 15 seconds (under actions).
I also found that table size is also not increasing as well as same table is being sequentially read for 500 sec and then deleted for 15 seconds (under Actions in sm50) and program is also same.
This is happening since last 3 hours now.
Under SCC3 I can see the status as processing reset.
Does anyone face this issue ever? And can anyone suggest is everything is running OK or there is
some problem.
Your suggestions will be highly appreciated.
Regards,
PG

Hello,
Did you recalculate full DB statistics after the last system copy from PRD to QA ?
This is very often forgotten, leading to long elapse times in select statements.
Check via DB20 on table ACCTCR from when latest DB statistics date.
Eventually rebuild all indexes from ACCTCR, this can be done online via ABAP RSANAORA if you are running Oracle.
You can also perform an SQL trace on the current running process to see if the select from the client copy is running correctly.
I also know that ACCTCR is a table containing transactional data and most of the time it contains a lot of data.
II suppose you are running a client copy with profile SAP_ALL on QA based on a copy of PRD ?
This means that you will end up with 2 production clients in QA ?
Is your QA system sized for this ?
Another question that you can ask your client, is data from ACCTCR really needed on QA on both clients.
If not it is maybe better to start an archiving based on SAP Note :
Note 83076 - MM_ACCTIT: Archiving programs for ACCTIT, ACCTHD, ACCTCR
Followed by a new client copy.
Success.
Wim

Unable to do the Local Client Copy

Hi, Experts
I have created a new client, and i have logged on that client and doing the local client copy. When I see the client copy log the client copy got cancelled.
When i check the log i am getting a error saying "The System's Time Zone Cannot be Determined. Enter it Using STZAC."
The time zone maintained in INDIA.
Thanks & Regards

Hello
Perform some checks
Please make sure that SAP time is same as the time on the operating system
Also make sure that u maintain time in the original client i.e the client which u r copying
Also I would recommend that you first delete the new client,then maintain all setting for time zone through the note 667169 and then again try client copy
hope it help
Rohit

Need Help!! Errors during Local Client Copy

Doing a Local Client Copy and getting these error messages in the log:
Table Name       Component          Package
/1CN/CMFSAPH0FOR                    DDIC Error        (See SE14)
/1CN/CMFSAPH1FDT                    DDIC Error        (See SE14)
/1CN/CMFSAPH1FFX                    DDIC Error        (See SE14)
/1CN/CMFSAPH2TGR                    DDIC Error        (See SE14)
/1CN/CMFSAPH2TRM                    DDIC Error        (See SE14)
/1CN/CMFSAPH3TCT                    DDIC Error        (See SE14)
/1CN/CMFSAPH3TUS                    DDIC Error        (See SE14)
/1CN/CMFSAPH4TFX                    DDIC Error        (See SE14)
/1CN/CMFSAPH4TQU                    DDIC Error        (See SE14)
Then I go to SE14 then put the name of the tables then click CHECK >> DATABASE OBJECT and then as the result I get:
"Table is not created in the database"
If I go down to the database level and look within the Oracle database dba_tables the tables and objects exists within the database but SAP is unable to recognize them. All objects were imported with a Oracle Data Pump dump file and now I just need help in getting SAP to recognize the tables.
Edited by: Adam Gendle on Feb 19, 2010 12:29 AM

Hi,
Its showing inconsistency between ABAP Dictionary and the database.
Have you run Test-Run before performing actual client copy ?
Please check the Consistency of affected Tables.
SE11 -> Display Table -> Utilities -> Database Object -> Check
(check DB Object as well as Run time Object)
Please refer this [SAP Note 686357 - Table pool length incorrect after Unicode conversion|https://service.sap.com/sap/support/notes/686357] to get more information. The relevant solution is mentioned there if the pool tables having inconsistency with VARDATA field.
Also refer SAP Note 1171306 - Error with pooled tables when copying a client.
Regards,
Bhavik G. Shroff

Local client copy error very..very......urgent

Hi experts,
while i am performing local client copy in background mode from 000 to 200
it is terminattin and it showing the below error
Target Client           200
Source Client                   000
Copy Type               Local Copy
Profile                 SAP_CUST
Status                  Cancelled
User                    SAP*
Start on                10.05.2008 / 14:53:00
Last Entry on           10.05.2008 / 14:53:51
Statistics for this Run
- No. of Tables                 0 of     53448
- Copied Lines                  0
Check System Log (SM21)
arnings and Errors
Table Name       Component Package
/1FB/MD___3M0001           DDIC Error        (See SE14)
/1FB/MD___3M0002           DDIC Error        (See SE14)
/1FB/MD___3M0003           DDIC Error        (See SE14)
/1FB/MD___3M0004           DDIC Error        (See SE14)
/1FB/MD___3M0005           DDIC Error        (See SE14)
/1FB/MD___3M0006           DDIC Error        (See SE14)
/1FB/MD___3M0007           DDIC Error        (See SE14)
/1FB/MD___3M0008           DDIC Error        (See SE14)
/1FB/MD___3M0009           DDIC Error        (See SE14)
/1FB/MD___3M000A           DDIC Error        (See SE14)
/1FB/MD___3M000B           DDIC Error        (See SE14)
/1FB/MD___3M000C           DDIC Error        (See SE14)
/1FB/MD___3M000D           DDIC Error        (See SE14)
/1FB/MD___3M000E           DDIC Error        (See SE14)
/1FB/MD___3M000F           DDIC Error        (See SE14)
/1FB/MD___3M000G           DDIC Error        (See SE14)
/1FB/MD___3M000H           DDIC Error        (See SE14)
and when i checkd in system log in sm21 it is showing
he transaction has been terminated. This may be caused by a
ermination message from the application (MESSAGE Axxx) or by an
rror detected by the SAP System due to which it makes no sense to
roceed with the transaction. The actual reason for the termination
s indicated by the T100 message and the parameters.
plz......any one can help me
cheers
deepak

Actually it is problem with my database
recently i restored my database after that i performd client copy
when i am doing it above error showed in scc3 i checked the system log in that i found oracle error for that i reused my temp datafile using sql commands
SQL:>alter tablespace PSAPTEMP 'path of the file' add tempfile reuse;
finally i finished the my client copy with out any error
regards
deepak

Local client copy for delta changes

Hello Support,
We have requirement of copying data(local client copy) of last one month. This is a rrepetitiveactivity and has to be done once in every month.
For example, in DEV we have 3 clients 200, 210 clients. They make changes in 200 client and these changes has to be reflected in 210 clients. For changing 1 month data we can't perform client copy with SAP_ALL.
I have an idea that we can perform local client copy using TDMS 4.0 but can we do delta client copy?
So, my question here is
1. Can we perform client copy for specific selected data(by date, for eg last 30days) without deleting existing data?
2. We have step 'Start Deletion of Data in Receiving System' in Time Based Reduction scenario, can we skip this and continue proceed with client copy?
Thanks,
Uday.

Hello Uday,
SAP TDMS Time based reduction package copies the whole of master data and customization data along with the transactional data being filtered based on the Data Slice Date Provided.
SAP TDMS cannot be used for a Delta Copy to copy only a months data keeping the existing data in the system. If the requiremnt is to run every month, you could give an approritate slice date and transfer the whole data again using SAP TDMS which would include the latest one month data as well.
It is not recommended to skip the step "Data deletion in Receiver system" and then execute the SAP TDMS package. This can lead to issue during the transfer.
Regards,
Sreejith Rajashekaran

Local client copy running from long time

Hi Experts,
The local client copy is running from very long time at the phase "Post Processing"(since 14 hrs).
and our database size is 971.5 GB.
Could some body help me , generally how much time it will take to complete this phase,
and really if some thing is going wrong could you please where to check why its taking this much time.
Current screen shot:
Target Client                400
Source Client (incl. Auth.) 500
   Source Client User Master 500
Copy Type                    Local Copy
Profile                      SAP_ALL
- Restart                   X
Status                       Processing (Restart)...
User                         SAP*
Start on                     14.03.2011 / 10:10:11
Last Entry on                15.03.2011 / 22:06:46
Current Action:              Post Processing         Component
- Last Exit Program         RSSOUSCO_FOR_CC         BC-SRV-GBT
Statistics for this Run
- No. of Tables (Total)          55537 of     55852
- In This Run                        0 of       315
- Previously Copied Tables       55537
- Deleted Lines               39542230
- Copied Lines               300488666
Thanks in advance.
Suresh Babu

Hi,
As sunny explained.. there is lot of factors involved in Client copy.
1) Database Size
2) Tables
3) System Resources
You can exclude the tables in client copy if you really dont need the data of tha particular tables while scheduling the client copy.
any way we could see that No. of Tables (Total) 55537 of 55852 copied.. it's almost done 300+ tables are there to copy.
-Srini

Can not perform local client copy

Hi Expert,
I am not able to perform the local client copy for newly created on production server as system not accepting standard password 'PASS' for user SAP*.
Same is working fine at IDES server.
Please help
Thanks
Gaurav

Hi,
Make sure there's a profile parameter: login/no_automatic_user_sapstar = 0 and then restarted?
U can change the parameter by:
Execute T-Code RZ10 and the select default.pfl form the list of profiles avaialable
then go to edit mode and then click on create
Give the name of the parameter and its value and then save the profile
then it will ask you to activate the profile, Now just click on Ok, it will done
Restart the system and it will work fine.
Or
Just go to RZ10>>>>select instance profile>>>>extended maintanance>>>>change>>>>change the value for parameter>>>>>copy>>>>back>>>>>save&activate
Thanks
Ruchika
Edited by: Ruchika Kapoor on Aug 17, 2009 1:58 PM

Extremely slow during Local client copy

Hi guru's,
We have planed for the local client copy in our system.Normally it would n't take much time(generally it will finished between 8 to 9 hr max), but this time it took 4 days still it's running.
how to know why it took so long to complete?
thanks in advance
best regards
venkat.

Dear,
Venkat.
Can i know your SAP Version ,OS,database. & size of the database.
If you want to improve the performance.you have to exclude the data
Improving client copy performance: Excluding data
You can improve the performance of the client copy by, for example, by excluding tables or packages.
You can exclude tables from the client copy, for example if they are not relevant for the target client, in the Tables tab. For further information about excluding tables from the client copy, choose the Help button in the expert settings.
For further information about expert settings in the client copy, see the SAP note 446485.
by this your client copy performance can be increased.
Warm Regards.
Mohammed Hassan Naveed
Associate SAP Basis Consultant
Mumbai.

Local client copy giving trouble SAP ECC 6.0

Similar Messages

Maybe you are looking for