Local Client copy - help needed
Hello ,
I have to perform a client copy without data.
Can you please let me know, which profile I should use ?
SAP_ALL All Client-Specific Data w/o Change Documents
SAP_APPL Customizing and Application Data w/o Change Docs
SAP_APPX SAP_APPL w/o Authorization Profiles and Roles
SAP_CUST Customizing
SAP_CUSV Customizing and User Variants
SAP_CUSX Customizing w/o Authorization Profiles and Roles
SAP_PROF Only Authorization Profiles and Roles
SAP_UCSV Customizing, User Master Records and User Variants
SAP_UCUS Customizing and User Master Records
SAP_UONL User Without Authorization Profiles and Roles
SAP_USER User Master Records and Authorization Profiles
Thanks in advance for your help!
I would vote for:
SAP_UCSV Customizing, User Master Records and User Variants
SAP_UCUS Customizing and User Master Records
Daniel
Edited by: Daniel_Bul on Mar 7, 2012 11:22 AM
Hi,
SAP_CUSX would be better if you dont want the same user master data in both the clients otherwise you can go ahead with SAP_UCSV .
Regards,
Nirmal.K
Similar Messages
-
Need Help!! Errors during Local Client Copy
Doing a Local Client Copy and getting these error messages in the log:
Table Name Component Package
/1CN/CMFSAPH0FOR DDIC Error (See SE14)
/1CN/CMFSAPH1FDT DDIC Error (See SE14)
/1CN/CMFSAPH1FFX DDIC Error (See SE14)
/1CN/CMFSAPH2TGR DDIC Error (See SE14)
/1CN/CMFSAPH2TRM DDIC Error (See SE14)
/1CN/CMFSAPH3TCT DDIC Error (See SE14)
/1CN/CMFSAPH3TUS DDIC Error (See SE14)
/1CN/CMFSAPH4TFX DDIC Error (See SE14)
/1CN/CMFSAPH4TQU DDIC Error (See SE14)
Then I go to SE14 then put the name of the tables then click CHECK >> DATABASE OBJECT and then as the result I get:
"Table is not created in the database"
If I go down to the database level and look within the Oracle database dba_tables the tables and objects exists within the database but SAP is unable to recognize them. All objects were imported with a Oracle Data Pump dump file and now I just need help in getting SAP to recognize the tables.
Edited by: Adam Gendle on Feb 19, 2010 12:29 AMHi,
Its showing inconsistency between ABAP Dictionary and the database.
Have you run Test-Run before performing actual client copy ?
Please check the Consistency of affected Tables.
SE11 -> Display Table -> Utilities -> Database Object -> Check
(check DB Object as well as Run time Object)
Please refer this [SAP Note 686357 - Table pool length incorrect after Unicode conversion|https://service.sap.com/sap/support/notes/686357] to get more information. The relevant solution is mentioned there if the pool tables having inconsistency with VARDATA field.
Also refer SAP Note 1171306 - Error with pooled tables when copying a client.
Regards,
Bhavik G. Shroff -
Local Client Copy error in post processing phase
Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
AntarpreetHi,
You need not worry at all as this is not a warning (although marked
so in message), and its just an information so you are better able to run
the job RGUGBR00 in SE38 with all the options mentioned in message above
marked.
Regards,
Aidan -
Local client copy running from long time
Hi Experts,
The local client copy is running from very long time at the phase "Post Processing"(since 14 hrs).
and our database size is 971.5 GB.
Could some body help me , generally how much time it will take to complete this phase,
and really if some thing is going wrong could you please where to check why its taking this much time.
Current screen shot:
Target Client 400
Source Client (incl. Auth.) 500
Source Client User Master 500
Copy Type Local Copy
Profile SAP_ALL
- Restart X
Status Processing (Restart)...
User SAP*
Start on 14.03.2011 / 10:10:11
Last Entry on 15.03.2011 / 22:06:46
Current Action: Post Processing Component
- Last Exit Program RSSOUSCO_FOR_CC BC-SRV-GBT
Statistics for this Run
- No. of Tables (Total) 55537 of 55852
- In This Run 0 of 315
- Previously Copied Tables 55537
- Deleted Lines 39542230
- Copied Lines 300488666
Thanks in advance.
Suresh BabuHi,
As sunny explained.. there is lot of factors involved in Client copy.
1) Database Size
2) Tables
3) System Resources
You can exclude the tables in client copy if you really dont need the data of tha particular tables while scheduling the client copy.
any way we could see that No. of Tables (Total) 55537 of 55852 copied.. it's almost done 300+ tables are there to copy.
-Srini -
Local client copy (Transaction SCCL)
Hi Experts
I am a Basis tem member I have installed SAP Netweaver 2004s now I am create (Tr. Code SCCL) a new client as 100 when I am login in 100 client as sap* and password is pass it is not logged
Can u help me how to create new client and how to copy process
Please help me
With best regards
Sanjay C.Hi,
When you create a new client from SCC4, you can login to this newly created client using user - SAP* and password - PASS.
If you are not able to login using this credentials then check the parameter login/no_automatic_user_sapstar (as Juan mentioned above).
The user SAP* is inactive by default in a new client. To activate the user SAP*, set the parameter login/no_automatic_user_sapstar = 0, and restart the system.
You should be able to login after this.
For local client copy, you can check the link - http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c5b4ba111d189750000e8322d00/frameset.htm
for details.
Its very simple, you need to ensure that enough space is there, select the required profile and start the copy in SCCL.
You can monitor the same via SCC3. -
I m trying to do local client copy from 000 to 400 while it has given error that RFC needs to created for FINBASIS component. After searching the net i come across that to do that we need to implement note 568784. However while uploading note from desktop it is giving ABAP Short dump
Runtime Errors : CONVT_NO_NUMBER in progarm SAPLSCWU
any help apprecited
regards
mangeshThis note doesn't actually require that you upload it. In fact, all you really need to do is create the RFC destination (as directed within the note) and then run transaction FINB_TR_DEST.
Hope that helps.
J. Haynes -
Local Client Copy and Remote Client Copy in MS - SQL Database
Dear Gurus,
If i need to do the local client copy or remote client what is the procedure i should consider because i'm using MS-SQL 2005 database.Most of the thread using Oracle database.Can u give me the step by step or manual how to make it.
Thanks an advance.
/ShahHi.
SAP Help is a very good source for info -> [Link|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm].
I suggest that you read the manual carefully. There are many tipps to improve performance (parallel processes) and tipps and tricks to avoid problems. If you need some notes, they are adviced there.
Also the notes [116787|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=116787], [552711|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=552711], [67205|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=67205] or [489690|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=489690] are interesting.
regards,
Martin -
Condition record's not getting copied in local client copy !!!
Hi ALL,
I have a one question/doubt regarding local client copy.
Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
Message no. VJ000u201D
Can u pls suggest proper way to copy/transport condition record in new client created?
Regards,
C Singh.Please refer below link
http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
Regards,
Pavan -
Local Client Copy taking too much time
Hi All,
I recently done a system refresh of my Quality server (restore PRD backup to QUA Server)
After that I have created a new client and has initiated a local client copy after the test run
went successful.
Then after reading approximately 4500 table it has got stuck and I saw in SM50 that table "ACCTCR"
was running since approximately 56000 seconds.
Then I run the program 'BTCTRNS1" to clean the work processes.
After that I again restarted the local client copy in restart mode.
Now since last 3 hours I can see in SM50 that table u201CACCTCR" is being sequentially ready for approx 500(under Actions) seconds and then delete for 15 seconds (under actions).
I also found that table size is also not increasing as well as same table is being sequentially read for 500 sec and then deleted for 15 seconds (under Actions in sm50) and program is also same.
This is happening since last 3 hours now.
Under SCC3 I can see the status as processing reset.
Does anyone face this issue ever? And can anyone suggest is everything is running OK or there is
some problem.
Your suggestions will be highly appreciated.
Regards,
PGHello,
Did you recalculate full DB statistics after the last system copy from PRD to QA ?
This is very often forgotten, leading to long elapse times in select statements.
Check via DB20 on table ACCTCR from when latest DB statistics date.
Eventually rebuild all indexes from ACCTCR, this can be done online via ABAP RSANAORA if you are running Oracle.
You can also perform an SQL trace on the current running process to see if the select from the client copy is running correctly.
I also know that ACCTCR is a table containing transactional data and most of the time it contains a lot of data.
II suppose you are running a client copy with profile SAP_ALL on QA based on a copy of PRD ?
This means that you will end up with 2 production clients in QA ?
Is your QA system sized for this ?
Another question that you can ask your client, is data from ACCTCR really needed on QA on both clients.
If not it is maybe better to start an archiving based on SAP Note :
Note 83076 - MM_ACCTIT: Archiving programs for ACCTIT, ACCTHD, ACCTCR
Followed by a new client copy.
Success.
Wim -
Unable to do the Local Client Copy
Hi, Experts
I have created a new client, and i have logged on that client and doing the local client copy. When I see the client copy log the client copy got cancelled.
When i check the log i am getting a error saying "The System's Time Zone Cannot be Determined. Enter it Using STZAC."
The time zone maintained in INDIA.
Thanks & RegardsHello
Perform some checks
Please make sure that SAP time is same as the time on the operating system
Also make sure that u maintain time in the original client i.e the client which u r copying
Also I would recommend that you first delete the new client,then maintain all setting for time zone through the note 667169 and then again try client copy
hope it help
Rohit -
Hi experts,
while i am performing local client copy in background mode from 000 to 200
it is terminattin and it showing the below error
Target Client 200
Source Client 000
Copy Type Local Copy
Profile SAP_CUST
Status Cancelled
User SAP*
Start on 10.05.2008 / 14:53:00
Last Entry on 10.05.2008 / 14:53:51
Statistics for this Run
- No. of Tables 0 of 53448
- Copied Lines 0
Check System Log (SM21)
arnings and Errors
Table Name Component Package
/1FB/MD___3M0001 DDIC Error (See SE14)
/1FB/MD___3M0002 DDIC Error (See SE14)
/1FB/MD___3M0003 DDIC Error (See SE14)
/1FB/MD___3M0004 DDIC Error (See SE14)
/1FB/MD___3M0005 DDIC Error (See SE14)
/1FB/MD___3M0006 DDIC Error (See SE14)
/1FB/MD___3M0007 DDIC Error (See SE14)
/1FB/MD___3M0008 DDIC Error (See SE14)
/1FB/MD___3M0009 DDIC Error (See SE14)
/1FB/MD___3M000A DDIC Error (See SE14)
/1FB/MD___3M000B DDIC Error (See SE14)
/1FB/MD___3M000C DDIC Error (See SE14)
/1FB/MD___3M000D DDIC Error (See SE14)
/1FB/MD___3M000E DDIC Error (See SE14)
/1FB/MD___3M000F DDIC Error (See SE14)
/1FB/MD___3M000G DDIC Error (See SE14)
/1FB/MD___3M000H DDIC Error (See SE14)
and when i checkd in system log in sm21 it is showing
he transaction has been terminated. This may be caused by a
ermination message from the application (MESSAGE Axxx) or by an
rror detected by the SAP System due to which it makes no sense to
roceed with the transaction. The actual reason for the termination
s indicated by the T100 message and the parameters.
plz......any one can help me
cheers
deepakActually it is problem with my database
recently i restored my database after that i performd client copy
when i am doing it above error showed in scc3 i checked the system log in that i found oracle error for that i reused my temp datafile using sql commands
SQL:>alter tablespace PSAPTEMP 'path of the file' add tempfile reuse;
finally i finished the my client copy with out any error
regards
deepak -
Local Client Copy Error : Completed w. Dictionary Errors
Hi,
I have performed local client copy in the ECC 6.0 system.I mean SAP Netweaver 7.0 EHP1.I have selected source system 100 and target system 200 and profile is SAP_CUST with my User ID in 200 client having SAP_ALL,SAP_NEW.In the SCC3 throws error i,.e, Completed w. Dictionary Errors.The client 200 is newly created in the system.
Target Client 200
Source Client 100
Copy Type Local Copy
Profile SAP_CUST
Status Completed w. Dictionary Errors
User I998769
Start on 06.12.2009 / 12:47:59
Last Entry on 06.12.2009 / 14:00:12
Statistics for this Run
- No. of Tables 56872 of 58391
- Deleted Lines 5705995
- Copied Lines 5770444
Warnings and Errors
Table Name Component Package
A001 SD-MD-CM DDIC Error (See SE14)
A004 SD-MD-CM DDIC Error (See SE14)
A005 SD-MD-CM DDIC Error (See SE14)
A006 SD-MD-CM DDIC Error (See SE14)
A007 SD-MD-CM DDIC Error (See SE14)
A009 SD-MD-CM DDIC Error (See SE14)
A010 SD-MD-CM DDIC Error (See SE14)
A012 SD-MD-CM DDIC Error (See SE14)
A015 SD-MD-CM DDIC Error (See SE14)
Nearly about 1520 tables are not copied from the source client and there is no dumps for that.Please,find below for the file log information which is highlighted in red color in log.
Start of post-processing by application exits 13:57:48
Automatic postprocessing of client 200 was incorrect -> long text
Post-processing required for FINB_TR_CC_EXIT_TARGET
Validation/substitution: Programs should be regenerated
Selected tables : 58.391
Copied data in kBytes : 2.933.491
Deleted data in kBytes : 2.845.416
Program ended with error or warning, return code: W
Runtime (seconds) : 4.333
End of processing: 14:00:12
Kindly,help me how to resolve the issue and provide relavent notes which is applicable to my error as per the SAP release.Hi,
We encounter the same problem with different A***-tables. The problem is that these seem to be pooled tables. I had a look at sap note 1248769 and it mentions that the reconstruct-option is only liable for transparent tables. This seems to be right, as the option "Reconstruct" is greyed out in tx SE14 when we try to.
Any other options?
Jan
PS. Sorry for hijacking the thread, but it seems the topic starter is still looking for an answer as well
Edit: Found another SAP Note which seems relevant: 1171306. This note has the following segment in it:
If you still want to remove the inconsistency, you can proceed as described in the following. However, the table must be empty for you to be able to do this (you can check this with the report NROWS: start the report NROWS, enter DVPOOLTEXT for "Table 1" on the selection screen and choose Execute.)
1. Call transaction SE14.
2. Edit DVPOOLTEXT.
3. Delete the database table.
4. Create a database table.
If the pool is not empty and the data is required, it must be unloaded in advance and then read again after you have recreated the table.
Ofcourse we would like to preserve our data in the tables. Let's take a look at an example in our system: Table A017. This table has encountered the DDIC error during client copy. We have performed the following analysis actions on it:
Report NROWS mentions 116.390 entries for table A017.
In SE16 table A017 has 0 entries.
In SE14 I have performed two checks: The runtime object seems ok. When I check database object in SE14 the system returns the following message: "Table is not created in database".
Any tips?
Edited by: Jan Laros on Sep 8, 2010 2:25 PM -
Local client copy error - Table "BKPF" not edited due to excessive number
Hi,
I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
===
2 ETA163 Table "BKPF" not edited due to excessive number of errors
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "COEP" not edited due to excessive number of errors
3 ETA311 Process "00002" started on server "sfrndevsap15"
(time: "17:20:51")
2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
3 ETA311 Process "00003" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
0 0 17:20:52"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "HRP1001" not edited due to excessive number of errors
3 ETA311 Process "00004" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
0 29 17:21:21"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "PCL4" not edited due to excessive number of errors
===
Please help ASAP, as this is effecting our testing team. I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client. This is also taking quite a long time.
Thanks in advance,
AbdulHi Abdul,
What does your system log say ?
Check this SAP Note
Note 579783 - CC ERROR: Loss of data - table not copied
run the report RSCC_VERIFY to check if the table is consistent within the source client.
SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
Regards,
Siddhesh -
Local Client Copy Error in Post-Processing
Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice. Also performed the update statistics on db.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
AntarpreetHello Gagan,
I am facing the errors in table /SAPCND/CC_GROUP_WS_NG belonging to component AP-PRC-CON. It says post processing required.
The oss note says about component FINB-TR-DERIVATION.
I am not sure whether it is good to run the steps as mentioned in oss note 1235955.
Thanks for your response and look forward to further help.
Regards,
Antarpreet -
Can not perform local client copy
Hi Expert,
I am not able to perform the local client copy for newly created on production server as system not accepting standard password 'PASS' for user SAP*.
Same is working fine at IDES server.
Please help
Thanks
GauravHi,
Make sure there's a profile parameter: login/no_automatic_user_sapstar = 0 and then restarted?
U can change the parameter by:
Execute T-Code RZ10 and the select default.pfl form the list of profiles avaialable
then go to edit mode and then click on create
Give the name of the parameter and its value and then save the profile
then it will ask you to activate the profile, Now just click on Ok, it will done
Restart the system and it will work fine.
Or
Just go to RZ10>>>>select instance profile>>>>extended maintanance>>>>change>>>>change the value for parameter>>>>>copy>>>>back>>>>>save&activate
Thanks
Ruchika
Edited by: Ruchika Kapoor on Aug 17, 2009 1:58 PM
Maybe you are looking for
-
Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is t
-
Delivered quantity error when using MBST to reverse a MIGO
We have a user who goes into MBST to reverse a transaction and she is not able to, gets the following error: Delivered quantity 1,015 EA for acct assgmt 4500012817 00010 01 falls short by 0 EA She is actually trying to reverse the quantity of 2900 on
-
4:3/16:9 Export
Hello I'm trying to export video in fcp, first clip was in 16:9 format, than I add a few clips in format of 4:3, now when I want to export I always get 4:3 Can anyone please help me how to export in 16:9 movie which also inlcude a few croped 4:3 clip
-
I can't get my time capsule to turn on after a software update. Reset button does nothing and it is pluged in to a live outlet. Is my time capsule dead?
-
{Arch} Clan RTCW-ET
this is just a thread to see if anyone would be interested in starting a clan for arclinux in the online multiplayer game RTCW-ET if interested post a reply and if any info on the game is needed pm me or check for me on the #archlinux irc channel. We