Local client copy (Transaction SCCL)

Hi Experts
I am a Basis tem member I have installed SAP Netweaver 2004s now I am create (Tr. Code SCCL) a new client as 100 when I am login in 100 client as sap* and password is pass it is not logged
Can u help me how to create new client and how to copy process
Please help me
With best regards
Sanjay C.

Hi,
When you create a new client from SCC4, you can login to this newly created client using user - SAP* and password - PASS.
If you are not able to login using this credentials then check the parameter login/no_automatic_user_sapstar (as Juan mentioned above).
The user SAP* is inactive by default in a new client. To activate the user SAP*, set the parameter login/no_automatic_user_sapstar = 0, and restart the system.
You should be able to login after this.
For local client copy, you can check the link - http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c5b4ba111d189750000e8322d00/frameset.htm
for details.
Its very simple, you need to ensure that enough space is there, select the required profile and start the copy in SCCL.
You can monitor the same via SCC3.

Similar Messages

Local client copy TCODE SCCL

Hi BASIS Gurus,
Please help me troubleshooting my local client copy. Below are my concerns.
Summary:
1. Client copy is running in background.
2. DB size is 250GB.
3. Oracle 9
4. Windows 2003
Concerns:
1. Ran in source: client, SM50 shows sequential read from table COEP, after sequential action became delete. My worry is instead of action delete it should be insert right?
2. Copy is still on COEP table after 4hours. Is this normal?
3. I cant logon anymore to target client because it already copied the sap* of the source. I tried to delete the sap* table USR02 from target client and still no luck, user sap* is still locked. any sugestions?
4. I've been running the background client copy for almost 14hours. is there away to add parallel processes to speed up client copy?
Thanks in advance.
best regards,
Joel

Hi,
1. Ran in source: client, SM50 shows sequential read from table COEP, after sequential action became delete. My worry is instead of action delete it should be insert right?
It should be delete as client copy will delete existing data before copying
2. Copy is still on COEP table after 4hours. Is this normal?
This purely depends upon size of table and your system performance
3. I cant logon anymore to target client because it already copied the sap* of the source. I tried to delete the sap* table USR02 from target client and still no luck, user sap* is still locked. any sugestions?
It should work , eventhough you can try using any other user of source system , may be missing missing something ..But logon should work with SAP* , if its not avilabe in database (make sure you have deleted SAP* from target client )
4. I've been running the background client copy for almost 14hours. is there away to add parallel processes to speed up client copy?
Now you can not add parallel processing , one thing you can do is run update statistics that helped me lot of time to speed up processing.
Regards,

Local client Copy problem using sccl in ECC 6.0- Long time

Hi,
My system ecc6.0 and I am started the client copy form 000 client to 100 client
Now 25 passed but still the copy process not completed .
I am create the client 100 in 000
Then logged into 100
Then start the client copy usuing sccl in background
I am not run the test run
Please check the below logs and suggest.
Regards,
Ravi
Target Client                100
Source Client (incl. Auth.) 000
source Client User Master 000
Copy Type                    Local Copy
Profile                      SAP_ALL
Status                       Processing...
User                         SAP*
Start on                     13.08.2008 / 16:25:57
Last Entry on                13.08.2008 / 17:00:51
Current Action:              Post Processing        Component
- Last Exit Program         /SAPCND/CC_GROUP_WS_NG AP-PRC-CON
Statistics for this Run
- No. of Tables                  54569 of     54569
- Deleted Lines                    109
- Copied Lines                 5101492
Output Sm66 :-
Sort: Server
Server Name       No. Type PID      Status Reason Sem Start Error CPU Time   User Report   Action          Table
myhost_RD1_00 12 BTC     11391 Running            Yes              92662 SAP* SAPLSDNT Sequential Read D010TAB
   Client copy from 2008-08-13 16:26:00
   System ID............................ RD1
   Target client........................ 100
   R/3 Release.......................... 700
     Basis Support Package...............SAPKB70014
   Host................................. myhost
   Start in background............. .....X
   User................................. SAP*
   Parameter
   Source client........................ 000
   Source client user masters............000
   Copier profile:.......................SAP_ALL
   Table selection
   Customizing data .....................X
   With application data................ X
   Initialize and recreate......... X
   Change documents are not copied
Target client   100
Source client   000
User Name       SAP*
SAP Release     700
Profile name    SAP_ALL
Total number of tables                       54.569
Number of Customizing and syst. tables       34.654
Number of application tables                 18.185
Number of local tables (to delete)            1.730
Total number of exit programs                    14
Number of selection exits                         8
Number of generation exits                        1
Number of other exit programs                     5

hello
It is waiting for some post processing.
Please check the
Note 930816 - Cond. Maint. group not generated after remote client copy.
971707 , 1176933
This will help you.
Thanks
Amit

Local Client Copy taking too much time

Hi All,
I recently done a system refresh of my Quality server (restore PRD backup to QUA Server)
After that I have created a new client and has initiated a local client copy after the test run
went successful.
Then after reading approximately 4500 table it has got stuck and I saw in SM50 that table "ACCTCR"
was running since approximately 56000 seconds.
Then I run the program 'BTCTRNS1" to clean the work processes.
After that I again restarted the local client copy in restart mode.
Now since last 3 hours I can see in SM50 that table u201CACCTCR" is being sequentially ready for approx 500(under Actions) seconds and then delete for 15 seconds (under actions).
I also found that table size is also not increasing as well as same table is being sequentially read for 500 sec and then deleted for 15 seconds (under Actions in sm50) and program is also same.
This is happening since last 3 hours now.
Under SCC3 I can see the status as processing reset.
Does anyone face this issue ever? And can anyone suggest is everything is running OK or there is
some problem.
Your suggestions will be highly appreciated.
Regards,
PG

Hello,
Did you recalculate full DB statistics after the last system copy from PRD to QA ?
This is very often forgotten, leading to long elapse times in select statements.
Check via DB20 on table ACCTCR from when latest DB statistics date.
Eventually rebuild all indexes from ACCTCR, this can be done online via ABAP RSANAORA if you are running Oracle.
You can also perform an SQL trace on the current running process to see if the select from the client copy is running correctly.
I also know that ACCTCR is a table containing transactional data and most of the time it contains a lot of data.
II suppose you are running a client copy with profile SAP_ALL on QA based on a copy of PRD ?
This means that you will end up with 2 production clients in QA ?
Is your QA system sized for this ?
Another question that you can ask your client, is data from ACCTCR really needed on QA on both clients.
If not it is maybe better to start an archiving based on SAP Note :
Note 83076 - MM_ACCTIT: Archiving programs for ACCTIT, ACCTHD, ACCTCR
Followed by a new client copy.
Success.
Wim

Local client copy error very..very......urgent

Hi experts,
while i am performing local client copy in background mode from 000 to 200
it is terminattin and it showing the below error
Target Client           200
Source Client                   000
Copy Type               Local Copy
Profile                 SAP_CUST
Status                  Cancelled
User                    SAP*
Start on                10.05.2008 / 14:53:00
Last Entry on           10.05.2008 / 14:53:51
Statistics for this Run
- No. of Tables                 0 of     53448
- Copied Lines                  0
Check System Log (SM21)
arnings and Errors
Table Name       Component Package
/1FB/MD___3M0001           DDIC Error        (See SE14)
/1FB/MD___3M0002           DDIC Error        (See SE14)
/1FB/MD___3M0003           DDIC Error        (See SE14)
/1FB/MD___3M0004           DDIC Error        (See SE14)
/1FB/MD___3M0005           DDIC Error        (See SE14)
/1FB/MD___3M0006           DDIC Error        (See SE14)
/1FB/MD___3M0007           DDIC Error        (See SE14)
/1FB/MD___3M0008           DDIC Error        (See SE14)
/1FB/MD___3M0009           DDIC Error        (See SE14)
/1FB/MD___3M000A           DDIC Error        (See SE14)
/1FB/MD___3M000B           DDIC Error        (See SE14)
/1FB/MD___3M000C           DDIC Error        (See SE14)
/1FB/MD___3M000D           DDIC Error        (See SE14)
/1FB/MD___3M000E           DDIC Error        (See SE14)
/1FB/MD___3M000F           DDIC Error        (See SE14)
/1FB/MD___3M000G           DDIC Error        (See SE14)
/1FB/MD___3M000H           DDIC Error        (See SE14)
and when i checkd in system log in sm21 it is showing
he transaction has been terminated. This may be caused by a
ermination message from the application (MESSAGE Axxx) or by an
rror detected by the SAP System due to which it makes no sense to
roceed with the transaction. The actual reason for the termination
s indicated by the T100 message and the parameters.
plz......any one can help me
cheers
deepak

Actually it is problem with my database
recently i restored my database after that i performd client copy
when i am doing it above error showed in scc3 i checked the system log in that i found oracle error for that i reused my temp datafile using sql commands
SQL:>alter tablespace PSAPTEMP 'path of the file' add tempfile reuse;
finally i finished the my client copy with out any error
regards
deepak

Local Client Copy Error : Completed w. Dictionary Errors

Hi,
I have performed local client copy in the ECC 6.0 system.I mean SAP Netweaver 7.0 EHP1.I have selected source system 100 and target system 200 and profile is SAP_CUST with my User ID in 200 client having SAP_ALL,SAP_NEW.In the SCC3 throws error i,.e, Completed w. Dictionary Errors.The client 200 is newly created in the system.
Target Client             200
Source Client           100
Copy Type               Local Copy
Profile                      SAP_CUST
Status                      Completed w. Dictionary Errors
User                        I998769
Start on                   06.12.2009 / 12:47:59
Last Entry on          06.12.2009 / 14:00:12
Statistics for this Run
- No. of Tables            56872 of     58391
- Deleted Lines           5705995
- Copied Lines            5770444
Warnings and Errors
Table Name             Component          Package
A001                   SD-MD-CM           DDIC Error        (See SE14)
A004                   SD-MD-CM           DDIC Error        (See SE14)
A005                   SD-MD-CM           DDIC Error        (See SE14)
A006                   SD-MD-CM           DDIC Error        (See SE14)
A007                   SD-MD-CM           DDIC Error        (See SE14)
A009                   SD-MD-CM           DDIC Error        (See SE14)
A010                   SD-MD-CM           DDIC Error        (See SE14)
A012                   SD-MD-CM           DDIC Error        (See SE14)
A015                   SD-MD-CM           DDIC Error        (See SE14)
Nearly about 1520 tables are not copied from the source client and there is no dumps for that.Please,find below for the file log information which is highlighted in red color in log.
   Start of post-processing by application exits 13:57:48
   Automatic postprocessing of client 200 was incorrect -> long text
   Post-processing required for FINB_TR_CC_EXIT_TARGET
   Validation/substitution: Programs should be regenerated
   Selected tables           :         58.391
   Copied data in kBytes :      2.933.491
   Deleted data in kBytes :      2.845.416
   Program ended with error or warning, return code: W
   Runtime (seconds)         :          4.333
   End of processing: 14:00:12
Kindly,help me how to resolve the issue and provide relavent notes which is applicable to my error as per the SAP release.

Hi,
We encounter the same problem with different A***-tables. The problem is that these seem to be pooled tables. I had a look at sap note 1248769 and it mentions that the reconstruct-option is only liable for transparent tables. This seems to be right, as the option "Reconstruct" is greyed out in tx SE14 when we try to.
Any other options?
Jan
PS. Sorry for hijacking the thread, but it seems the topic starter is still looking for an answer as well
Edit: Found another SAP Note which seems relevant: 1171306. This note has the following segment in it:
If you still want to remove the inconsistency, you can proceed as described in the following. However, the table must be empty for you to be able to do this (you can check this with the report NROWS: start the report NROWS, enter DVPOOLTEXT for "Table 1" on the selection screen and choose Execute.)
1. Call transaction SE14.
2. Edit DVPOOLTEXT.
3. Delete the database table.
4. Create a database table.
If the pool is not empty and the data is required, it must be unloaded in advance and then read again after you have recreated the table.
Ofcourse we would like to preserve our data in the tables. Let's take a look at an example in our system: Table A017. This table has encountered the DDIC error during client copy. We have performed the following analysis actions on it:
Report NROWS mentions 116.390 entries for table A017.
In SE16 table A017 has 0 entries.
In SE14 I have performed two checks: The runtime object seems ok. When I check database object in SE14 the system returns the following message: "Table is not created in database".
Any tips?
Edited by: Jan Laros on Sep 8, 2010 2:25 PM

Local client copy error - Table "BKPF" not edited due to excessive number

Hi,
I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
===
2 ETA163 Table "BKPF" not edited due to excessive number of errors
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "COEP" not edited due to excessive number of errors
3 ETA311 Process "00002" started on server "sfrndevsap15"
(time: "17:20:51")
2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
3 ETA311 Process "00003" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
0 0 17:20:52"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "HRP1001" not edited due to excessive number of errors
3 ETA311 Process "00004" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
0 29 17:21:21"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "PCL4" not edited due to excessive number of errors
===
Please help ASAP, as this is effecting our testing team. I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client. This is also taking quite a long time.
Thanks in advance,
Abdul

Hi Abdul,
What does your system log say ?
Check this SAP Note
Note 579783 - CC ERROR: Loss of data - table not copied
run the report RSCC_VERIFY to check if the table is consistent within the source client.
SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
Regards,
Siddhesh

Local client copy for delta changes

Hello Support,
We have requirement of copying data(local client copy) of last one month. This is a rrepetitiveactivity and has to be done once in every month.
For example, in DEV we have 3 clients 200, 210 clients. They make changes in 200 client and these changes has to be reflected in 210 clients. For changing 1 month data we can't perform client copy with SAP_ALL.
I have an idea that we can perform local client copy using TDMS 4.0 but can we do delta client copy?
So, my question here is
1. Can we perform client copy for specific selected data(by date, for eg last 30days) without deleting existing data?
2. We have step 'Start Deletion of Data in Receiving System' in Time Based Reduction scenario, can we skip this and continue proceed with client copy?
Thanks,
Uday.

Hello Uday,
SAP TDMS Time based reduction package copies the whole of master data and customization data along with the transactional data being filtered based on the Data Slice Date Provided.
SAP TDMS cannot be used for a Delta Copy to copy only a months data keeping the existing data in the system. If the requiremnt is to run every month, you could give an approritate slice date and transfer the whole data again using SAP TDMS which would include the latest one month data as well.
It is not recommended to skip the step "Data deletion in Receiver system" and then execute the SAP TDMS package. This can lead to issue during the transfer.
Regards,
Sreejith Rajashekaran

Compile after local client copy

Hi guys,
We noticed that SAP ECC 6 will compile some stuff again after a local client copy. e.g. when we launch MM01 in the newly created client (by copy) it compiles again. The transaction has been run in the source client.
Is this normal? Can we limit these compiling actions by a specific sgen task? Which one? Regenerate after an SAP System Upgrade?
Thanks in advance!

Hello Juan,
So far I have not even once done SGEN after a client copy. SGEN is needed only after a fresh installation, SAP upgrade and support package import. This is when we are doing SGEN. SGEN is needed only when either the object is new or has got modified. Infact regeneration of programs also happens after transport imports which carry program changes.
Though nothing wrong in doing SGEN after client copy. Can be done if you wish.
In this case it might be that the system we are talkign about may be a totally new system where SGEN has not been run even once.
Hello R. Van der Veen ,
Please confirm that you were using the system in past without this MM01 delay issue.
Also SGEn is system specific. Nothing to do with client.
Regards.
Ruchit.

Local client copy not working

I m trying to do local client copy from 000 to 400 while it has given error that RFC needs to created for FINBASIS component. After searching the net i come across that to do that we need to implement note 568784. However while uploading note from desktop it is giving ABAP Short dump
Runtime Errors : CONVT_NO_NUMBER in progarm SAPLSCWU
any help apprecited
regards
mangesh

This note doesn't actually require that you upload it. In fact, all you really need to do is create the RFC destination (as directed within the note) and then run transaction FINB_TR_DEST.
Hope that helps.
J. Haynes

Condition record's not getting copied in local client copy !!!

Hi ALL,
I have a one question/doubt regarding local client copy.
Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
Message no. VJ000u201D
Can u pls suggest proper way to copy/transport condition record in new client created?
Regards,
C Singh.

Please refer below link
http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
Regards,
Pavan

Can we create a local client copy for the RFID Client in discovery Box

Can we create a local client copy for the RFID(400 Client) in the Discovery Box,and if created which profile we have to select for the client and also at a time we can work on these both client or not .

This isn't possible with Live Mail. Acrobat has an add-in for Outlook (which you've used), but there is no similar function for Live Mail.

Unable to do the Local Client Copy

Hi, Experts
I have created a new client, and i have logged on that client and doing the local client copy. When I see the client copy log the client copy got cancelled.
When i check the log i am getting a error saying "The System's Time Zone Cannot be Determined. Enter it Using STZAC."
The time zone maintained in INDIA.
Thanks & Regards

Hello
Perform some checks
Please make sure that SAP time is same as the time on the operating system
Also make sure that u maintain time in the original client i.e the client which u r copying
Also I would recommend that you first delete the new client,then maintain all setting for time zone through the note 667169 and then again try client copy
hope it help
Rohit

Need Help!! Errors during Local Client Copy

Doing a Local Client Copy and getting these error messages in the log:
Table Name       Component          Package
/1CN/CMFSAPH0FOR                    DDIC Error        (See SE14)
/1CN/CMFSAPH1FDT                    DDIC Error        (See SE14)
/1CN/CMFSAPH1FFX                    DDIC Error        (See SE14)
/1CN/CMFSAPH2TGR                    DDIC Error        (See SE14)
/1CN/CMFSAPH2TRM                    DDIC Error        (See SE14)
/1CN/CMFSAPH3TCT                    DDIC Error        (See SE14)
/1CN/CMFSAPH3TUS                    DDIC Error        (See SE14)
/1CN/CMFSAPH4TFX                    DDIC Error        (See SE14)
/1CN/CMFSAPH4TQU                    DDIC Error        (See SE14)
Then I go to SE14 then put the name of the tables then click CHECK >> DATABASE OBJECT and then as the result I get:
"Table is not created in the database"
If I go down to the database level and look within the Oracle database dba_tables the tables and objects exists within the database but SAP is unable to recognize them. All objects were imported with a Oracle Data Pump dump file and now I just need help in getting SAP to recognize the tables.
Edited by: Adam Gendle on Feb 19, 2010 12:29 AM

Hi,
Its showing inconsistency between ABAP Dictionary and the database.
Have you run Test-Run before performing actual client copy ?
Please check the Consistency of affected Tables.
SE11 -> Display Table -> Utilities -> Database Object -> Check
(check DB Object as well as Run time Object)
Please refer this [SAP Note 686357 - Table pool length incorrect after Unicode conversion|https://service.sap.com/sap/support/notes/686357] to get more information. The relevant solution is mentioned there if the pool tables having inconsistency with VARDATA field.
Also refer SAP Note 1171306 - Error with pooled tables when copying a client.
Regards,
Bhavik G. Shroff

Local client copy Error

I have fresh installed ECC 6.0 with HP UX. I want to do local client copy.but it give error
lient copy from 03.02.2009 23:20:18
ystem ID............................ QAS
arget client........................ 900
/3 Release.......................... 700
Basis Support Package...............SAPKB70009
ost................................. quality
tart in background............. .....X
ser................................. SAP*
arameter
ource client........................ 000
ource client user masters............000
opier profile:.......................SAP_ALL
able selection
ustomizing data .....................X
ith application data................ X
nitialize and recreate......... X
hange documents are not copied
est mode (without database update).. R
thanks
Manu

thanks for your reply.I have set my INDIA time in 001
But during client copy it gives system Log
Details Page 2 Line 9 RSLG0001 - SAP Analysis of the Central System Log       1
Time     SAP instance   Type Nr Clt User TCode Program Terminal Package Grp N Text
18:16:23 quality_QAS_00 BTC 008 900 SAP*                        SBAC    BY 4 Database error 24909 at SEL access to ta
Details
Recording at local and central time........................ 05.02.2009 18:16:23
Task...... Process                      User...... Terminal Session TCode Program Cl Problem cl         Package
04523      Background Processor No. 008 SAP*                      1               K SAP Web AS Problem SBAC
Module nam Line SQL functi Table Name
dbrepo     2655 SEL        REPOLOAD
Documentation for system log message BY 4 :
After the attempt to access a database table the database system has
returned an error code which indicates that the operation concerned
could not be performed successfully.
The text of the system log message shows the error number, an
identification of the operation and the name of the table concerned.
The following abbreviations are used for the database operations:
CLC - Closing a database cursor
CRT - Creating a table on the database
DEL - Deleting table entries
EXE - Immediate execution of a database operation
FET - Reading one or several records of a database cursor
INS - Inserting one or several records into a database table
PRE - Executing a PREPARE operation
SEL - Executing a database selection
UPD - Changing one or several records in a database table
echnical details
File Offset RecFm System log type    Grp N variable message data
   1 135000 g     Database SQL Error BY 4 24909 SELREPOLOAD                                   dbrepo 2655
Plesae suggest
RAJ

Local client copy (Transaction SCCL)

Similar Messages

Maybe you are looking for