Local Client settings

Hi,
I am facing an issue with Excel in which if I try to open an existing workbook, it closes any blank template (book 1) if open automatically.
My colleagues use the same excel version but for them, opening an existing workbook does not close down the blank one. Any idea if this is some kind of local setting? 
Thanks

Hi,
As far as I know, Excel has no such local settings that effect your description of the phenomenon.  I noticed that you have posted the
similar thread in MSDN forum and then known more information about this issue. In my view, this issue may be caused by some macros running automatically when Excel is starting.
I recommend we start Excel with safe mode and check if this issue still occurs.
If it works fine, please try to check the following two paths:
Excel XLSTART folder (64bit Excel C:\Program Files \Microsoft Office\Office15\XLSTART). Rename Excel 15.xlb.
Excel PERSONAL macro workbook. (C:\Users\AppData\Roaming\Microsoft\Excel\XLSTART\PERSONAL.XLSB). Rename PERSONAL.XLSB
If this issue still exists, I recommend we re-create an user and preform
Windows clean boot to check if there are some third-party programs cause this issue.
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Similar Messages

  • RSSPACECHECK settings to properly plan for a SAP_CUST local client copy

    Hi,
    I want to run RSSPACECHECK to properly plan for a SAP_CUST local client copy. This is the part of an effort to create a new client. Can you tell me the proper settings/inputs in program RSSPACECHECK because I don't want to use asterisk (*) when I'm asked to enter the table to be checked.
    Thanks!
    Mark

    Hello,
    By setting the selection parameter "No Class A Tables" = "X", application data tables will not be checked. This should give you a proper estimate for the SAP_CUST copy as well as a decent runtime for RSSPACECHECK.
    Regards,
    Mark

  • Adobe Flash FAIL:  Adobe Flash Player local storage settings incorrect.  Module 'Resume' feature may not work on this computer.

    Using a Windows 2012 RDS Environment, we have users connecting to a CPD website, and as part of the CPD they need to run a systems checker.  When they run the systems checker they get the following error message: "Adobe Flash FAIL:  Adobe Flash Player local storage settings incorrect.  Module 'Resume' feature may not work on this computer". All users are connecting to this environment with Windows CE Clients,I have checked the setting on Adobe Flash and they seem correct but as each user has its own profile on the RDS session, is there something that I should be setting for each user. I have added the website to the trusted sites and it has made no difference.   Any ideas

    It sounds like what's happening is that Flash Player can't write or read from the local shared objects in the user's redirected home directory because we disallow traversing junctions in the broker process.  This behavior was disabled to address a vulnerability identified in some of John Forshaw's research into the IE broker last year.
    You can enable this behavior by adding the following setting to mms.cfg:
    EnableInsecureJunctionBehavior=1
    That said, you can probably gather from the name of the flag that we don't really recommend this approach, and disable this attack surface by default.  There's some risk that a network attacker could craft content that abuses fundamental issues with how Windows handles Junctions to write to arbitrary locations.
    Unfortunately, there's not a simple or easy workaround that I'm aware of (but it's been ages since I've administered a Windows domain) for this kind of NAS/SAN-backed terminal server environment where Flash is not able to access \Users\<user>\AppData\Roaming\Macromedia\Flash Player\ without traversing a junction.

  • SIU - Apply Computer Name and Local Hostname settings from a file

    I am setting up a workflow to image corporate computers and wanting to know how the "Apply Computer Name and Local Hostname settings from a file" works in the Apply System Configuration Settings task.
    We bind the computer to AD and OD and we have a specific naming convention for certain departments and trying to automate the entire imaging process.
    Would this be something that can be done with SIU?

    Well, maybe there's a bug in the latest version (10.5.3) of SIU as this is not what is happening.
    It doesn't seem to matter what I specify for the name parameters I end up with a Bonjour name of ".local".
    I put in a line of the form <Mac Address><TAB>tom<TAB>dick<TAB>harry into the text file used by the Apply System Configuration Settings Action.
    and end up with hostname = tom, Computer Name = dick and Bonjour Name = .local
    I'm building the NetInstall image on a new iMac running 10.5.3 booted out of a second partition and create the image from the main boot partition (also 10.5.3). I then copy the image to my server (10.5.3) and make a second iMac boot up from the NetInstall image.
    For what it is worth the Workflow Actions I am using are:
    Define Image Source
    + NetInstall
    Source: Macintosh HD
    Filter Clients by MAC Address
    + Allow
    <List of MAC Addresses>
    Enable Automated Installation
    + On Volume Named: Macintosh HD
    + Erase before installing
    + Primary Language: English
    Apply System Configuration Settings
    + Apply Computer Name and Local Hostname settings from a file: <FILE>
    Add Packages and Post-Install Scripts
    + Shell Script [Doesn't work - we're discussing in it in another thread]
    Create Image
    In: Public
    Named: NetInstall Classroom
    Volume Name: Classroom iMacs
    Index: 1

  • "package" ARD and VNC client settings?

    Hi-
    I work in a school, and manage @ 1,100 student iBooks. I'm trying to figure out how to create a package that performs the same functions as the "Change Client Settings" feature under the "Manage" Menu. We use external HD's to reimage the computers, and add packages to this HD that are installed post flight. Right now I have to do the reimaging, then use the "Change Client Settings Feature" seperately, then finally run a package that pushes out the VNC password, (com.apple.VNCSettings.txt) that is in the /Library/Preferences folder.
    We set up the computers so VNC is enabled, and the teacher account on the machine can use ARD.
    Any thoughts, ideas, or it can't be done's would be great.
    Thanks!
    Jim
    Mostly iBook G4's and G'3's Mac OS X (10.4.7) I use a MacMini w/ ARD 3.1 Admin

    I have found that reverse DNS entries, especially when they are wrong, can really mess things up. If you haven't already, in your ARD scanner windows, right-click and add the "DNS Name" column, and adjust the columns so you can see it. Whenever you have problems connecting in ARD, that's always a quick thing you can check. If the DNS name does not match your computer name, you'll have problems.
    I don't think you gave enough detail of what is and isn't working, but in general, you can try connecting both with dns names and IP addresses, and connecting to Macs sometimes works better by putting their name as macname.local instead of macname.yourdomain.com.
    If you try to connect with VNC via IP address, and the IP addresses on your servers are static (should be), and it doesn't work, it very likely could be a firewall setting. Even if you have the firewall off or ports open, you'll want to run a port scan against the server in question to test what truly is open.
    This is all general stuff. Post something more specific if none of this helps (detail of OS versions, programs used, ports set open, any error messages, etc).
    Good luck

  • How to manually retrieve Default Client Settings again

    I have a question about Default Client Settings in SCCM 2012.
    In our Default Client Settings we've added two AD groups for Viewers of Remote Control and Remote Assistance (Administration>Client Settings>Default Client Settings>Properties>Remote Tools> Permitted viewers and then Set Viewers).
    When I logon to a client computer and open Local User manager I can see these two AD groups added to the local group "ConfigMgr Remote Control Users".
    For testing I removed one of the member groups that was added.
    Now the question; How does the removed group come back to the client? I've ran all the Configuration Manager Actions on the client but this doesn't work. It doesn't add the member which I removed. I also waited 60 minutes to see if it would come back automatically,
    but no. Of course I can manually add this group again, but that is not what I want. 
    Or is the local group for Remote Control only filled the first time the Configuration Manager Client is installed on a computer? Or maybe there is another mechanism which takes care of filling the Remote Control Users group?

    Today I added a new AD group to "Viewers".
    After that, I ran the machine policy retrieval on my client on which I previously removed a group. After I ran this, de ConfigMgr Remote Control Users group was filled again. This time with 3 AD groups. So the group I removed before was added again and my new
    group was also added.
    Conclusion; if I make a change to the Default Client Settings it will push all the settings again to a client. But if you make a change locally, like removing a group, SCCM won't update this group again. It seems it doesn't do a verify on local settings
    unless something has changed in SCCM itself. Indeed it seems to imply a bug.

  • Extremely slow during Local client copy

    Hi guru's,
    We have planed for the local client copy in our system.Normally it would n't take much time(generally it will finished between 8 to 9 hr max), but this  time it took 4 days still it's running.
    how to know why it took so long to complete?
    thanks in advance
    best regards
    venkat.

    Dear,
    Venkat.
    Can i know your SAP Version ,OS,database. &  size of the database.
    If you want to improve the performance.you have to exclude the data
    Improving client copy performance: Excluding data
    You can improve the performance of the client copy by, for example, by excluding tables or packages.
    You can exclude tables from the client copy, for example if they are not relevant for the target client, in the Tables tab. For further information about excluding tables from the client copy, choose the Help button in the expert settings.
    For further information about expert settings in the client copy, see the SAP note 446485.
    by this your client copy performance can be increased.
    Warm Regards.
    Mohammed Hassan Naveed
    Associate SAP Basis Consultant
    Mumbai.

  • Design Studio 1.3 as local client - application on iPad?

    Hi,
    I have installed Design Studio 1.3 SP0 as a local client on my PC. I'm trying to get my DS apps onto my iPad but have so far failed.
    I have allowed external access to the embedded web server (DS: Tools --> Preferences).
    As far as I understand this issue, it should then be sufficient to click on "Send to Mobile Device using QR code", scan the code with my iPad and launch the URL in Safari.
    Unfortunately, this is not what happens. What happens is: Safari attempts to connect for about a minute and then displays this error message: "Safari could not open the page because the serve stopped responding". I tried the identical app on my android mobile phone and got a slightly different message "Web page not available".
    Am I overlooking some simple step? I believe I managed to do this some months ago using DS 1.2. But of course, I cannot verify that now.
    Bonus question: Does drag and drop work with DS apps on an iPad.
    Cheers
    Martin

    I think so too.
    So much is still missing that has long been available in WAD or Xcelsius/ Dashboard. And it's still a bit buggy. I found I could avoid a lot of error messages if I changed the Windows language/ region settings to English.
    I think it is still too early to advise clients to move to DS. In my experience, much of SAP's software got really good after version 3.0, e.g. SAP BW.

  • Do GPO settings override Custom Client Settings

    In our environment we have a GPO that sets the powershell execution policy to AllSigned.  I've set the custom client settings Powershell Execution Policy to Bypass.  What wins? The GPO or the Custom Client settings?  From what i can tell
    via testing, it's the GPO, but I'd like to see some documentation or hear from others that can confirm that.

    GPO wins. That's based on the fact that the ConfigMgr clients usually creates a local policy (which is always overwritten by a GPO).
    Torsten Meringer | http://www.mssccmfaq.de

  • What are the settings for the "Default Client Settings"?

    What are the settings for the "Default Client Settings"? I changed them instead of creating a new policy and would like to fix that.
    Thanks
    James A+, Network+, MCP

    Hi,
    The blogs below provides the default client settings.
    Default Client Settings in SCCM 2012 SP1
    http://prajwaldesai.com/default-client-settings-sccm-2012-sp1-sccm-2012-sp1/
    Note: Microsoft provides third-party contact information to help you find technical
    support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Best Regards,
    Joyce

  • Is it possible to use certutil to export multiple certificates from a local client machine store, to a .p7b file?

    Is it possible to use certutil to export multiple certificates from a local client machine store, to a .p7b file?
    Scenario: We have a few legacy certificates based on some legacy templates (2012 R2). Some belong to an old SubCA (2008 R2).
    I’ve can manually export them using certmgr mmc on the local machine to a single .p7b e.g.
    cert_backupNEW.p7b. But this is not a practical solution for me and I want to achieve this remotely via certutil or some other util that comes with Windows 7 machines.
    I’ve already worked out how to run a certutil command to add the certs back into the store e.g.
    certutil.exe -addstore -f my cert_backupNEW.p7b
    Is there a way to export multiple certs to a single backup cert, or is what I’m trying to do not possible with multiple certs?
    TC

    Something like this:
    $store = New-Object Security.Cryptography.X509Certificates.X509Store "my","localmachine"
    $store.Open("ReadOnly")
    Set-Content -Path exportedcerts.pfx -Value $store.Certificates.Export("pfx","password")
    $store.Close()
    note that this command will fail, if there are certificates with non-exportable keys. You cannot export certificates with non-exportable keys.
    My weblog: en-us.sysadmins.lv
    PowerShell PKI Module: pspki.codeplex.com
    PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
    Check out new: SSL Certificate Verifier
    Check out new:
    PowerShell FCIV tool.

  • Condition record's not getting copied in local client copy !!!

    Hi ALL,
    I have a one question/doubt regarding local client copy.
    Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
    I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
    I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
    Message no. VJ000u201D
    Can u pls suggest proper way to copy/transport condition record in new client created?
    Regards,
    C  Singh.

    Please refer below link
    http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
    Regards,
    Pavan

  • Client settings in R/3 For Extraction to BW

    Can any one provide what client settings on R/3 is required to Extract Data from R/3 to BW. any link or docs will do. can send on [email protected]

    Hello PraKasH & L.E. HaarHoFF,
    how r u ?
    could me send ur gmail ID to my ID.... coz the files size is more than 20 MB.
    [email protected]
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Local Client Copy taking too much time

    Hi All,
    I recently done a system refresh of my Quality server (restore PRD backup to QUA Server)
    After that I have created a new client and has initiated a local client copy after the test run
    went successful.
    Then after reading approximately 4500 table it has got stuck and I saw in SM50 that table "ACCTCR"
    was running since approximately 56000 seconds.
    Then I run the program 'BTCTRNS1" to clean the work processes.
    After that I again restarted the local client copy in restart mode.
    Now since last 3 hours I can see in SM50 that table u201CACCTCR" is being sequentially ready for approx 500(under Actions) seconds and then delete for 15 seconds (under actions).
    I also found that table size is also not increasing as well as same table is being sequentially read for 500 sec and then deleted for 15 seconds (under Actions in sm50) and program is also same.
    This is happening since last 3 hours now.
    Under SCC3 I can see the status as processing reset.
    Does anyone face this issue ever? And can anyone suggest is everything is running OK or there is
    some problem.
    Your suggestions will be highly appreciated.
    Regards,
    PG

    Hello,
    Did you recalculate full DB statistics after the last system copy from PRD to QA ?
    This is very often forgotten, leading to long elapse times in select statements.
    Check via DB20 on table ACCTCR from when latest DB statistics date.
    Eventually rebuild all indexes from ACCTCR, this can be done online via ABAP RSANAORA if you are running Oracle.
    You can also perform an SQL trace on the current running process to see if the select from the client copy is running correctly.
    I also know that ACCTCR is a table containing transactional data and most of the time it contains a lot of data.
    II suppose you are running a client copy with profile SAP_ALL on QA based on a copy of PRD ?
    This means that you will end up with 2 production clients in QA ?
    Is your QA system sized for this ?
    Another question that you can ask your client, is data from ACCTCR really needed on QA on both clients.
    If not it is maybe better to start an archiving based on SAP Note :
    Note 83076 - MM_ACCTIT: Archiving programs for ACCTIT, ACCTHD, ACCTCR
    Followed by a new client copy.
    Success.
    Wim

  • Foreign Trade / Custom data for local Client

    Hi SD's,
    I've an issue regarding the creation of Billing document, because for a local Client it is asking me for this data.
    We've a 3 scenarios working:
    1- Normal sales inside the country for a certain Order Type - ZA, Delivery Type - ZA and Billing doc Type - ZA. Flow works ok.
    2- Export sales - flow work ok and the user as to fill Foreign Trade / Custom data (using the same documents types as above);
    3- Intermediation - for local client or to export, here is where the system fails when we've local Client it still ask for Foreign Trade / Custom data and it should not. In this scenario we are using Order Type - ZB, Delivery Type - ZB and Billing doc Type - ZB and we've CO-PA for this scenario.
    I think this may be related because before we've this scenario integrating with CO-PA everything worked perfect.
    Does anyone have a clue on this?
    I've read some notes regarding Foreign Trade / Custom data but none of them seam to answer my problem.
    Thanks in advance.
    Regards,
    BO.

    Hi bruno
    It is in copy control  VTLA and in  VTFL also . select your order type and delivery type and click on blue lens on top left. There try to maintain as follows:-
    Order requirements:::::::001
    Combination requirmt::::051
    Header Data:::::::::::::::::001
    Similarly, go to VTFL, select your delivery type and billing type and click on blue lens on top left. There for the field Determine export data, maintain as per your requirement and for Copying requirements, maintain routine 003.
    Regards
    Srinath

Maybe you are looking for