Local currency missing

Hello,
Im testing a service contract but the following error is shown:
Pricing: Local currency missing
Message no. PRC_MESSAGES_EXT504
Diagnosis
A series of data, including the local currency, is required for pricing. However, this was not given when pricing was called.
Kind Regards

Hello,
Thanks,
In fact the problem was the sales organization, this was the place where the Local Currency was missing.
SAP Note 1294039 - Longtext missing local currency
After correcting the missing value, pricing determination was performed.
Kind Regards

Similar Messages

F-03: Amt in doc currency & local currency does not tally

Hello Friends,
When doing clearing using F-03 for GL Account 137500 in SGD (document currency), The amount
does not tally with Amount in local currency (USD) and the selected items
clearing lines not generated automatically. Why is this happening.
I found that this is not due to exchange rate
Please help to resolve.
Ramu

There are too many questions..let us take it one at a time
a. I am using tcode f-03 for clearing GL Account - OK
b. When i process the open items and select the items for clearing OK
c. When posting the difference of the selected items OK
d. the amount in local currency(USD) does not tally with the amount in document currency (SGD)
Response: This will not as the exchange rates are not 1:1 that is One USD will not get you One SGD. The difference will remain.
e. this is not due to the exchange rate, for example the figure in amount in local currency is 100 USD, the figure in the field amount in document currency is showing as 300 SGD,
Response: In all likelihood look at the GL master data `(FS00) and check the values in the `Control Tab`
f. and also automatic generation of lines (debit & credit) for the sum of selected open items are missing
Response:* As in (e) please check if the line item display is checked in the same tab.
Cheers
tkvishwa

Depreciation in Local Currency 2

Experts,
We had missing exchange rates which we added into OB08. However, there were depreciation runs posted prior to adding these missing exchange rates and therefore the depreciation runs were posting depreciation amounts in local currency 2 using the wrong exchange rate. Now that we have added in the correct exchange rates is there any way to adjust or recalculate the depreciated amount in local currency 2 to reflect the updated rates?
I have tried running AFAR, but get no results in order to process further.
How can we ensure that the new rates are considered going forward for depreciation?
Thank you!
Savitha

Hi Ajay,
I think you are saying to pass a journal entry using F-02. But how do I pass that into the parallel currency only? By specifying the company code and entering with local currency 2? How can I enter this without entering an amount for the company code currency? Also, you are suggesting that I hit the same accounting as regular depreciation postings, but I cannot find a transaction type that will allow me to post. Will I need to create a new transaction type?
After changing the exchange rates the new depreciation postings are not recognizing the new rates. Even when I try to run repeat depreciations it still does not adjust local currency 2. Should I block and reenter these assets in order to get them in the right exchange rates or is there a better/simpler way?
Thanks!
Savitha

Report showing GL Accounts with document posted in currency other than local currency

We need a report that shows all the GL Accounts that had a document posted in currency other than local currency during the month. The purpose of such a report is that we should not miss any Foreign Currency Gain or Loss at the end of the month.
Is there such a report already in Standard SAP ? Please let me know. Points guaranteed.

Hi Ajay sir,
It's never be a bad idea. But I think Rajeev might be looking for a stright report than work around, which is not available.
Regards...
Jose

Local currency balance in parked documents.

Hello all,
We have realized that some foreign currency parked documents, eventhough they are zero balanced in the document currency, they keeps not zero balances in local currency until they are posted. Generally there are small differences such as 0,01.
We wonder whether there is a way of getting these documents already balanced to zero in local currency at the moment of parking them, in order to advoid some incorrect messages generated by some local developments ("Z" programs).
Thanks a lot in advance,
     Manuel

Hello Gladys,
Thanks for your reply but, actually what we use is "save as completed" document but local currency still stay unbalanced.
We have an authorization Workflow, the approver receives the "saved as completed" document with the difference in local currency and, it is just when he or she approves the entry that the system adjusts and post...
Do you still thinking that every "saved as completed" document (in foreign currency) must be zero balanced in local currency? Cuold I be missing any flag or customizing for this to work?
   Thanks a lot in advance and, best regards,
     Manuel

Depreciation in group currency shows huge differences with local currency

hi,
i am posting depreciation for SG01(Singapore CC).System posts 100 SGD local currency and 20000 MYR in Group currency. I maintain currecncy rates and I checked the rates are correct.Inspite of maintaining the rates correctly.sap posting 20000k as group currency.
Sap should post 100 SGD and 300 Group currency.why system is posting the group currency as 20000.whether any config i am missing or anything i have to maintain.
Any help is greatly appreciated.
Thks
cra

Check translation ratios between SGD and MYR in TCURF table

OB26 Balances in Local Currency only

I have the field Balances in Local Currency only set to Opt. entry in OB26. However, when I go to FS00, the field is not there. I have tried changing it in OB26 to required and it still is missing in FS00.
Any ideas? Thanks

Dear,
Go to OBD4
Select the Account group
Click on "Account Control", select either optional or required for "Only balances in local"
Hope this solves your issue
Thanks

SEM -BCS Trasaction currency and Local Currency

SAPGURUS
I have one issue , When the users are doing Half yearly BCS they see that for one company code for one item period values Local currency is diifeernt from
Transaction currency .
My question is why this Transaction currency is different from local currecny.
How to rectify this .
Are they missing any exchnage rate conversion .
Thanks in Advance .
are they missing any exchnage rate conversion .

Hi Dan Sullivan
Thanks for the quick reply .
One more question .
I see in the BCS T Curency as Euro and Local currency as Euro .
but the period values localy currency is different from Transaction currency .
I think the values should be the same if both T Currecny and Local Currency is same .
I also observed that this particular difference is happening only for 2 particular set of accounts . Those accounts are related to Intercompany related G L Accounts values .
I also observed that in the Break down category for these G L Accounts The break down structure category has defined as defaulted .
I would like to know what would be the cause for the above .
Thanks in Advance .
Ravindrareddy.P.

Field Local currency not filled : POSDM Error

Dear Experts,
When I am posting a POS transaction( in /n/posdw/mon0 ) in SAP BW and trying to process 0001 - Supply BW without Distribution (Collective Processing) its giving me error that ---Field local currency not maintained. I have checked all POS configurations .Kindly Suggest me if I am missing anything in BW side.
Thanks & Regards
Rakesh

Dear Vikrant,
Thank you for your input. I have already loaded the master data.
But, with your suggestion I have checked the 0plant data in BI and found that Local currency is not maintained in the respective records. After maintaining the local currency manually , the error get resolved.
Kindly let me know, while pulling the Plant master from ERP to BI, why the local currency is not filled in the record. Suggest me to resolve this.
Thanks & regards
Rakesh

Field Local Currency Not maintained --POSDM

Hi Gurus .
When i am posting a POS transaction( in /n/posdw/mon0 ) in SAP BW and trying to select "Supply BW Immediately" its giving me error that ---Field local currency not maintained. I have checked all POS configurations .Please tell me if i am missing anything in BW side.
Thanks
Montz

Hi ,
I saw your thread its not helpful in any ways.
Thanks,
Montz

MM invoice reversal-"Message No. M8396-Different local currencies CAD USD

Hi,
My client created a PO with two line items and both the line items have the plants belonging to the same company code with CAD currency. But the second item in the PO needed an account assignment and they are using a cost center belonging to other company code with USD curr. They have posted an invoice against this PO and now when they are trying to reverse/cancel the invoice they are not able to do. They are getting an error "Message No. M8396 - Different local currencies CAD USD".
Is there anyway that they can do this?
Regards,
Raj/
Edited by: Raj Ph on Jun 8, 2009 5:44 PM

Hello,
Refer SAP
Note 592312 - MIRO: Termination M8396 'Different local currency'
Note 457247 - Missing translation for messages
Regards,
Ravi

Difference in values in local currency - MB51

Hello all,
In our scenario we moved all the inventory out of system using 562 and moved all the same amount stock back using 561.
the movement of stock generated material documents that were displayed using MB51. MB51 also has a layout option to display the value of the stock in local currency.
the issue is - when the same amount of stock of the particular material was moved back into the system using 561, there was a change in the value (local currency Value) of the stock, eventhough the same amount of inventory of the particular material was posted back. the difference in the value was very small (only few decimal values less than the original amount)
could you pl. let me know what causes this difference in value before and after moving the stock.(using movement types 561 and 562)
Pl. let me know the reason and possible ways of having the same value before and after moving the stock into the system
Thanks
Maxx

AFAIK,
Did you perform any recovery on the database?
As said above archive log list give the current information.
SQL> select max(sequence#) from v$archived_Log;
MAX(SEQUENCE#)
            10
SQL> archive log list
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            F:\oracle\product\10.1.0\Db_1\RDBMS
Oldest online log sequence     9
Next log sequence to archive   11
Current log sequence           11
SQL> alter system switch logfile;
System altered.
SQL> select max(sequence#) from v$archived_Log;
MAX(SEQUENCE#)
            11
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Total System Global Area 612368384 bytes
Fixed Size                   790624 bytes
Variable Size             170127264 bytes
Database Buffers          440401920 bytes
Redo Buffers                1048576 bytes
Database mounted.
SQL> recover database until cancel;
Media recovery complete.
SQL> alter database openresetlogs;
alter database openresetlogs
ERROR at line 1:
ORA-02231: missing or invalid option to ALTER DATABASE
SQL> alter database open resetlogs;
Database altered.
SQL> archive log ist
SP2-0718: illegal ARCHIVE LOG option
SQL> archive log list
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            F:\oracle\product\10.1.0\Db_1\RDBMS
Oldest online log sequence     0
Next log sequence to archive   1
Current log sequence           1
SQL> select max(sequence#) from v$archived_Log;
MAX(SEQUENCE#)
            11Regards,
Taj

Depreciation posting Local currency 100 SGD and Group currency MYR 20000

hi,
i am posting depreciation for SG01(Singapore CC).System posts 100 SGD local currency and 20000 MYR in Group currency. I maintain currecncy rates and I checked the rates are correct.Inspite of maintaining the rates correctly.sap posting 20000k as group currency.
Sap should post 100 SGD and 300 Group currency.why system is posting the group currency as 20000.whether any config i am missing or anything i have to maintain.
Any help is greatly appreciated.
Thks
cra

Check translation ratios between SGD and MYR in TCURF table

Determine tax amount in local currency in MIR7

Hi,
I have an invoice in foreign currency that also shows a VAT amount in my local currency. If I park this invoice in F-63, I can unmark "Only transfer amnts in document curr. in invoice" and enter the VAT amount in my local currency as well. When I later post the invoice, the VAT amount remains unchanged.
However, if I need to park the invoice in MIR7, there is no such field as far as I can see. If I enter the VAT amount in my local currency, this is overwritten with a new amount when I later post the invoice.
Is this functionality missing in MIR7?
Kind regards,
Moly

Hi,
we will try the settings from OSS note 730466 and see if that helps.
/Moly

Field Local Currency not filled

Hi
Field Local Currency not filled
Message no. /POSDW/CORE081
Diagnosis
Field Local Currency does not have a value (initial).
System Response
Current processing requires the field to be enriched within the master data checks.
Procedure for System Administration
Check Customizing for the master data checks.
Regards
Mark

hi
kindly implement SAP Note 19915 for Missing Customizing master data
You have to transfer the table entries in question manually.
there are two different procedures are possible:
1. Use a correction request to copy the relevant data
for example: in source: use Table view -> Transport to create a new
correction request (pushbutton "Create").
Select the entries you want to transport and use the "Add to corr."
button to add them to the correction and save.
In the target client, use CASE -> Tools -> Client copy -> Copy via
command file (TA SCC2) to perform the transport.
or
2. Use transaction OY19 (Customizing -> Tools -> Table compare)
to compare or replicate the respective tables.
regards
laksh

Local currency missing

Similar Messages

Maybe you are looking for