Local DB extraction Error
Hi,
While trying to extract Local DB below are errors
Unable to establish synchronization session with server.
The authentication system cannot find the user with the specified username.
Please check that you have entered the username correctly or contact your system administrator for assistance.
Unable to Connect to server
We have applied 8.1.1.3 patch on 8.1.1.0, if I try to extract local db in 8.1.1.0 environment I am able to extract successfully. On same local machine where this is unsuccessful for 8.1.1.3.
Thanks
Sean
You get this IP-Address (or a different one, if it is dynamic), when connected to the LAN. When not connected, your machine has virtual address 127.0.0.1 (mapped to hostname 'localhost'). To have always the same address, install and configure a loopback adapter and map your hostname to the corresponding IP-Address. How to do this is described here:
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#BABGHEFB
(It doesn't matter, that documentation comes from 10g, it's a generic procedure).
Werner
Similar Messages
-
I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Error when crawling "Unable to load stemmer for locale 1033. Error code 80040111."
In the Sharepoint Search Service I get tose error "MAPI: Logon failed. " in the log and "Unable to load stemmer for locale 1033. Error code 80040111." in ULS.
The error code 80040111 is well a relation with Mapi but what about stemmer???Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
CC 2014 update extraction error on Mac
When attempting to update to CC 2014 on Mac OS 10.9.3, I'm repeatedly met with "Update Failed: Unable to extract the downloaded files. Press Retry to download again. (U44M1I210)."
Strange enough, Adobe Media Encoder and Adobe After Effects updated to their 2014 versions no problem, but this broke the dynamic link to Premiere. (Another hassle to deal with throughout the work day until Premiere is updated)
Adobe Illustrator stalled at 42% for 3 hours, so I quit the Creative Cloud manager and tried again. Continuously met with the same extraction error message.
Any resolutions out there? Restarting the computer and repairing permissions has not yielded any change.Hi Rave,
Thank you for taking the time to reply. I found that simply deleting the ~/Library/Application Support/Adobe/AAMUpdater/ directory was a faster solution than taking the time out of my day to uninstall and reinstall all of my Adobe apps. I will be submitting a bug report to address the issue with the Creative Cloud updater.
Thanks,
dtderong -
Error in Local Message System: Error when opening an RFC connection Message
Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner "local:sapgw00' not reached
Error Details LOCATION: SAP-Gateway on host local / sapgw05
Error Details DETAIL: NiPConnect2
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 40142
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 2835
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Wed Jan 11 23:26:54 2012
Error Details VERSION: 38
Kindly Help.....Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj -
Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8 -
Cost Center hierarchy extraction errors
Hi,
I'm trying to extract R3 Cost center hierarchies into BW and in doing so, I get following errors. Could some one shed some light on these errors.
Extraction (messages):Errors occured
Error occured in the data selection
But, I successfully extracted Cost center master data from R3 just before hierarchy extraction.
I also checked RSA3 for the hierachy that I'm trying and it pulled around 2000 records in R/3 datasource extractor.
Appreciate any help
Hari Immadi
http://immadi.com
SEM BW AnalystHi,
Thanks for your reply.
I replicated the datasource before starting the extraction & also I double cheked the hierarchy name between BW & R3.
I don't get any other useful messages in the log & here is the entire log.
Requests : Everything OK
Extraction : Errors occured --> Errors occured in the data selection
Trasnfer IDOCS & TRFC : Everything OK
Processing (data packet) : No data
Subseq processing : Missing messages
Soon after execution of extraction, I get ALE Inbox error as follows & I double cheked that hierarchy in R/3 is not being edited.
Express document "Check Load from InfoSource 0COSTCENTER" received from author " Warehouse background user"
Check Load from InfoSource 0COSTCENTER , Packet Cost Center hier test
for demo
Please execute the mail for additional information.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Service API .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that
the file that was to be loaded was being edited at the time of the data
request. Make sure that the file is in the specified directory and is
not being edited, and restart the request.
Note: If you not wish to receive any mails, maintain transaction
RSMONMAIL.
Hari Immadi
http://immadi.com
SEM BW Analyst -
How to select a locale for parser error messages
Does anybody know how I can select a locale for parser error messages? I found org.xml.sax.Parser.setLocale, but that's for SAX1 and deprecated.
I have a textarea in the user interface where a user can edit XML and, of course, I'd like the parsing error messages to appear in the selected locale...
Any help appreciated.
- MichaelYes, but doing this you changed the locale for the JVM! I know that. My intention was to see whether the parsers even had error messages in languages other than English. If they didn't then there would be no point in proceeding. But they do, so maybe there is some point.
However you don't get to specify the locale for exceptions thrown by other Java classes, so I wouldn't be surprised to find you don't get to specify the locale for exceptions thrown by XML parsers. I'm not saying there is no way to do that, only that I would not be surprised if there were no way. -
Error BCOS088 "Error in local message system: Error while allocation..."
Hello,
I getting an error while creating a support message with "help->create support message".
The message number is BCOS088 "Error in local message system: Error while allocation: Overwrite a protected Message xxx not create."
I read a lot of threads about errors while creation of support message, but nothing helps.
Here are the facts:
- The error occurs on SolMan 4.0 system (sap basis rel. 7.0, SP15).
- BCOS_CUST: OSS_MSG | W | NONE | CUST620 | 1.0
- authorization trace without error
- DNO_CUST04: NO_USER_CHECK = X
So there is no authorization error, because of no RFC destination and successfully authorization trace.
What could be the reason of this error?
Thank you for answers, TinaHi Tina,
internal number range used for ABA Messages/Basis Notifications should match the external number range used for service desk messages.
For ABA messages:
Goto tx: DNO_CUST01 -> SLF1 -> Details
Should show number range 01
Number ranges for this object are defined via tx: DNO_NOTIF
For Service Desk Messages (Support Message SLFN):
Goto tx: SPRO -> "Check number range for Service Desk Message" -> SLFN -> Details
Should show number range 01 internal, 02 external
Number ranges for this object are defined via tx: CRMC_NR_RA_SERVICE
Number range 01 (internal) of ABA message should match number range 02 (external) of Support Message.
You may use other ranges but you should make sure they match.
Hope this helps. -
Photoshop CS3 Eng Widows WebInstaller Extract Error
I downloaded Photoshop CS3 and run the installer. After it extracted some part of installator files it displays extraction error, so the installator placed on the ADOBE.COM web site is corrupted. Where to find correct one?
Lets say. I tryed on 2 mashines: 1 in corporate network and second in home lan. Everyone of them have NOD32 antivirus installed and do not reported anything suspicios.
Problem still here. -
Position Activity Sequence Resulting in data extracting error
hi gurus
can any body tell me what is this position activity sequence error resulting in data extracting error, plz help. this is very high priority for me.
regards
devI rebuild the report using a tabular form and populated the primary key with a PL/SQL expression and now it appears to be working. P1_ISSUE_NO is the primary key on the issue table and I could not figure how to get it in the issue_no field of the tabular report when a new line was entered I ended up putting the following code in for the default for
issue_no on the report:
Begin
return :P1_ISSUE_NO;
end
It works great. -
[SOLVED] Pacman 3.2 Extracting Error
hmm, I think updates are still happening but there's that message:
error: could not extract (Premature end of gzip compressed data: Input/output error)
error: failed to update community (unexpected system error)
yaourt -Syyu
:: Synchronizing package databases...
testing 9.7K 113.1K/s 00:00:00 [#########################################################################] 100%
core 31.9K 188.7K/s 00:00:00 [#########################################################################] 100%
extra 396.2K 364.4K/s 00:00:01 [#########################################################################] 100%
community 80.0K 161.5K/s 00:00:00 [#########################################################################] 100%
error: could not extract (Premature end of gzip compressed data: Input/output error)
error: failed to update community (unexpected system error)
unstable 0.1K 2005.4K/s 00:00:00 [#########################################################################] 100%
archlinuxfr 27.6K 27.7K/s 00:00:01 [#########################################################################] 100%
Checking for package upgrades...
warning: firestarter: local (1.0.3-7.5) is newer than extra (1.0.3-7)
warning: lib32-e2fsprogs: local (1.40.8-1.1) is newer than archlinuxfr (1.40.8-1)
no upgrades found.
Last edited by ST.x (2008-08-07 15:23:04)Allan wrote:My guess is that the community database didn't get mirrored properly on the mirror you are using. Should fix itself in the next day.
okay, yeah I was thinking it seemed like a server problem since it proceeded to update some packages from community the first time I got that error. -
SQL Server - Extract Error - OGG-00868 Supplemental logging is disabled
Hello,
We are trying to replicate from a SQL Server 2008 database to Oracle database, but when trying to start the extract process we are getting the following error message:
OGG-00868 Supplemental logging is disabled for database 'GoldenGate'. To enable logging, perform the following: 1) Set 'trunc. log on chkpt.' to false. 2) Create a full backup of the database. Please refer to the "Oracle GoldenGate For Windows and UNIX Administration Guide" for details.
I have read that for enabling the supplemental logging is enough to "add trandata table_name", and this is done, and the extract process we are using is the following:
EXTRACT cap_or4
SOURCEDB GoldenGate
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
EXTTRAIL c:\GoldenGate\V28983-01-GG-111112-SQLServer-Windows-x64\dirdat\C4
TABLE GoldenGate.dbo.DES_T1;
And the 'trunc.log on chkpt' is set to false.
We don’t know what else to do, or to check... does anyone have any idea?!
Thank you very much, best regards,
Araitz.-Have you followed all the process for installing as per the guide? clearly you missed something
Please follow below steps.
Installation & Configuration of Oracle GoldenGate for MS SQL Server:
Pre-requisites:
1.Change Data Capture (CDC) must be enabled for Oracle GoldenGate and will be enabled by Oracle GoldenGate by means of the ADD TRANDATA command.
2.SQL Server source database must be set to use the full recovery model.
3.Oracle GoldenGate does not support system databases.
4.After the source database is set to full recovery, a full database backup must be taken.
5.SQL Server 2008 ODBC/OLE DB: SQL Server Native Client 10.0 driver
6.Oracle GoldenGate processes can use either Windows Authentication or SQL Server Authentication to connect to a database.
7.Before installing Oracle GoldenGate on a Windows system, install and configure the Microsoft Visual C ++ 2005 SP1 Redistributable Package. Make certain it
is the SP1 version of this package, and make certain to get the correct bit version for your server. This package installs runtime components of Visual C++
Libraries. For more information, and to download this package, go to http://www.microsoft.com.
Privileges:
1.Required SQL Server privileges for Manager when using Windows authentication
Extract(source system)
BUILTIN\Administrators account must be a member of the SQL Server fixed server role System Administrators.
Account must be a member of the SQL Server fixed server role System Administrators
Replicat (target system)
BUILTIN\Administrators account must be at least a member of the db_owner fixed database role of the target database.
Account must be at least a member of the db_owner fixed database role of the target database.
2.Required SQL Server privileges for Extract and Replicat when using SQL Server authentication
Extract - Member of the SQL Server fixed server role System Administrators.
Replicat - At least a member of the db_owner fixed database role of the target database.
Downloading Oracle GoldenGate
Download the appropriate Oracle GoldenGate build to each system that will be part of the Oracle GoldenGate configuration.
1. Navigate to http://edelivery.oracle.com.
2. On the Welcome page:
--Select your language.
--Click Continue.
3. On the Export Validation page:
--Enter your identification information.
--Accept the Trial License Agreement (even if you have a permanent license).
--Accept the Export Restrictions.
--Click Continue.
4. On the Media Pack Search page:
--Select the Oracle Fusion Middleware Product Pack.
--Select the platform on which you will be installing the software.
--Click Go.
5. In the Results List:
--Select the Oracle GoldenGate Media Pack that you want.
--Click Continue.
6. On the Download page:
--Click Download for each component that you want. Follow the automatic download
process to transfer the mediapack.zip file to your system.
Installing the Oracle GoldenGate files
1. Unzip the downloaded file(s) by using WinZip or an equivalent compression product.
2. Move the files in binary mode to a folder on the drive where you want to install Oracle GoldenGate. Do not install Oracle GoldenGate into a folder that contains spaces in its name, even if the path is in quotes. For example:
C:\“Oracle GoldenGate” is not valid.
C:\Oracle_GoldenGate is valid.
3. From the Oracle GoldenGate folder, run the GGSCI program.
4. In GGSCI, issue the following command to create the Oracle GoldenGate working
directories.
CREATE SUBDIRS
a.Create the necessary working directories for GG.
Source DB:
GGSCI>create subdirs
Target DB:
GGSCI>create subdirs
Install the GoldenGate Manager process
1.Create a GLOBALS parameter file
--Execute the following commands from the <install location>.
GGSCI> EDIT PARAMS ./GLOBALS
--In the text editor, type the following:
MGRSERVNAME <mgr service>
Using a GLOBALS file in each GoldenGate instance allows you to run multiple Managers as services on Windows. When the service is installed, the Manager name
is referenced in GLOBALS, and this name will appear in the Windows Services control panel.
Note! Check to ensure that the GLOBALS file has been added in the GoldenGate installation directory and that it does not have an extension.
--Execute the following command to exit GGSCI.
GGSCI> EXIT
2. Install the Manager service
Execute the following command to run GoldenGate’s INSTALL.EXE . This executable installs Manager as a Windows service and adds GoldenGate events to the
Windows Event Viewer.
Shell> INSTALL ADDSERVICE ADDEVENTS
Note: Adding the Manager as a service is an optional step used when there are multiple environments on the same system or when you want to control the name
of the manager for any reason.
Configuring an ODBC connection
A DSN stores information about how to connect to a SQL Server database through ODBC (Open Database Connectivity). Create a DSN on each SQL Server source
and target system.
NOTE: Replicat will always use ODBC to query the target database for metadata.
To create a SQL Server DSN
1. Run one of the following ODBC clients:
--If using a 32-bit version of Oracle GoldenGate on a 64-bit system, create the DSN by running the ODBCAD32.EXE client from the %SystemRoot%\SysWOW64
folder.
--If using a 64-bit version of Oracle GoldenGate on a 64-bit system, create a DSN by running the default ODBCAD32.EXE client in Control Panel>Administrative
Tools>Data Sources (ODBC).
--If using a version of Oracle GoldenGate other than the preceding, use the default ODBC client in Control Panel>Administrative Tools>Data Sources (ODBC).
2. In the ODBC Data Source Administrator dialog box of the ODBC client, select the System DSN tab, and then click Add.
3. Under Create New Data Source, select the correct SQL Server driver as follows:
--SQL Server 2000: SQL Server driver
--SQL Server 2005: SQL Native Client driver
--SQL Server 2008: SQL Server Native Client 10.0 driver
4. Click Finish. The Create a New Data Source to SQL Server wizard is displayed.
5. Supply the following:
--Name: Can be of your choosing. In a Windows cluster, use one name across all nodes in the cluster.
--Server: Select the SQL Server instance name.
6. Click Next.
7. For login authentication, select With Windows NT authentication using the network login ID for Oracle GoldenGate to use Windows authentication, or select
With SQL Server authentication using a login ID and password entered by the user for Oracle GoldenGate to use database credentials. Supply login information
if selecting SQL Server authentication.
8. Click Next.
9. If the default database is not set to the one that Oracle GoldenGate will connect to,
click Change the default database to, and then select the correct name. Set the other
settings to use ANSI.
10. Click Next.
11. Leave the next page set to the defaults.
12. Click Finish.
13. Click Test Data Source to test the connection.
14. Close the confirmation box and the Create a New Data Source box.
15. Repeat this procedure from step 1 on each SQL Server source and target system.
Setting the database to full recovery model
Oracle GoldenGate requires a SQL Server source database to be set to the full recovery model.
To verify or set the recovery model
1. Connect to the SQL Server instance with either Enterprise Manager for SQL Server 2000 or SQL Server Management Studio for SQL Server 2005 and 2008.
2. Expand the Databases folder.
3. Right-click the source database, and then select Properties.
4. Select the Options tab.
5. Under Recovery, set Model to Full if not already.
6. If the database was in Simple recovery or never had a Full database backup, take a Fulldatabase backup before starting Extract.
7. Click OK.
Enabling supplemental logging
These instructions apply to new installations of Oracle GoldenGate for all supported SQL Server versions. You will enable supplemental logging with the ADD
TRANDATA command so that Extract can capture the information that is required to reconstruct SQL operations on the target. This is more information than
what SQL Server logs by default.
--SQL Server 2005 updated to CU6 for SP2 or later: ADD TRANDATA calls the sys.sp_extended_logging stored procedure.
--SQL Server 2005 pre-CU6 for SP2: ADD TRANDATA creates the following:
A replication publication named [<source database name>]: GoldenGate<source database name> Publisher. To view this publication, look under Replication>Local
Publications in SQL Server Management Studio. This procedure adds the specified table to the publication as an article.
A SQL Server Log Reader Agent job for the publication. This job cannot run concurrently with an Extract process in this configuration.
--SQL Server 2008: ADD TRANDATA enables Change Data Capture (CDC) and creates a minimal Change Data Capture on the specified table.
a.Oracle GoldenGate does not use the CDC tables other than as necessary to enablesupplemental logging.
b.As part of enabling CDC, SQL Server creates two jobs per database: <dbname>_capture and <dbname>_cleanup. The <dbname>_capture job adjusts the secondary
truncation point and captures data from the log to store in the CDC
tables. The <dbname>_cleanup job ages and deletes data captured by CDC.
c.Using the TRANLOGOPTIONS parameter with the MANAGESECONDARYTRUNCATIONPOINT option for Extract removes the <dbname_capture> job, preventing the overhead of
the job loading the CDC tables.
d.The alternative (using TRANLOGOPTIONS with NOMANAGESECONDARYTRUNCATIONPOINT) requires the SQL Server Agent to be running and requires the <dbname>_capture and <dbname>_cleanup jobs to be retained. You will probably need to adjust the <dbname>_cleanup data retention period if the default of three days is not acceptable for storage concerns.
To enable supplemental logging
1. On the source system, run GGSCI.
2. Log into the database from GGSCI.
DBLOGIN SOURCEDB <DSN>[, USERID <user>, PASSWORD <password>]
Where:
-- SOURCEDB <DSN> is the name of the SQL Server data source.
-- USERID <user> is the Extract login and PASSWORD <password> is the password that is required if Extract uses SQL Server authentication.
3. In GGSCI, issue the following command for each table that is, or will be, in the Extract configuration. You can use a wildcard to specify multiple table
names, but not owner names.
ADD TRANDATA <owner>.<table>
NOTE:The Log Reader Agent job cannot run concurrently with the GoldenGate Extract process.
4.Configuration
a.Create and start manager on the source and the destination.
Source DB:
shell>ggsci
GGSCI> edit params mgr
PORT 7809
DYNAMICPORTLIST 7900-7950
DYNAMICPORTREASSIGNDELAY 5
AUTOSTART ER *
AUTORESTART ER *, RETRIES 3, WAITMINUTES 5, RESETMINUTES 30
LAGCRITICALMINUTES 60
LAGREPORTMINUTES 30
PURGEOLDEXTRACTS c:\ogg\dirdat\T*, USECHECKPOINTS, MINKEEPFILES 10
GGSCI> start manager
GGSCI>info all
b. Create the extract group on the source side:
GGSCI> edit params EXT1
Add the following lines to the new parameter file
EXTRACT EXT1
SOURCEDB <DSN>, USERID ogg, PASSWORD ogg@321!
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
EXTTRAIL c:\ogg\dirdat\T1
DISCARDFILE c:\ogg\dirrpt\EXT1.DSC, PURGE, MEGABYTES 100
TABLE dbo.TCUSTMER;
TABLE dbo.TCUSTORD;
GGSCI>ADD EXTRACT EXT1, TRANLOG, BEGIN NOW
GGSCI>ADD EXTTRAIL c:\ogg\dirdat\T1, EXTRACT EXT1, MEGABYTES 100
GGSCI> edit params PMP1
Add the following lines to the new parameter file
EXTRACT PMP1
SOURCEDB <DSN>, USERID ogg, PASSWORD ogg@321!
PASSTHRU
RMTHOST dr, MGRPORT 7810
RMTTRAIL c:\ogg\dirdat\P1
TABLE dbo.TCUSTMER;
TABLE dbo.TCUSTORD;
GGSCI> ADD EXTRACT PMP1, EXTTRAILSOURCE c:\ogg\dirdat\T1
GGSCI> ADD EXTTRAIL c:\ogg\dirdat\P1, EXTRACT PMP1, MEGABYTES 100
Target DB:
===========
shell>ggsci
GGSCI> edit params mgr
PORT 7810
AUTOSTART ER *
AUTORESTART ER *, RETRIES 3, WAITMINUTES 5, RESETMINUTES 30
LAGCRITICALMINUTES 60
LAGREPORTMINUTES 30
PURGEOLDEXTRACTS c:\ogg\dirdat\P*, USECHECKPOINTS, MINKEEPFILES 10
GGSCI> start manager
GGSCI>info all
Create parameter file for replicat:
GGSCI> edit params REP1
REPLICAT REP1
ASSUMETARGETDEFS
TARGETDB <dsn>, USERID ogg@DR, PASSWORD ogg@321!
DISCARDFILE c:\ogg\dirrpt\REP1.DSC, append, megabytes 100
HANDLECOLLISIONS
ASSUMETARGETDEFS
MAP dbo.TCUSTMER, TARGET dbo.TCUSTMER;
MAP dbo.TCUSTORD, TARGET dbo.TCUSTORD;
GGSCI>ADD REPLICAT REP1, RMTTRAIL c:\ogg\dirdat\P1, nodbcheckpoint
# Start extract and replicat:
Source:
GGSCI> start er *
Destination:
GGSCI> start er *Greetings,
N K -
Unable to run the local bussiness server - Error during startup of BPA
When i installed the BPA tool and started the 'LOCAL' server in oracle BPA Network. I am getting an error saying 'Unable to run the local bussiness server'. Then i checked the log and found the foolowing errors. Please suggest !
LoG File 1:-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2009-03-10 22:18:53,199 [ ARIS Server Site Startup process ]
2009-03-10 22:18:53,199
2009-03-10 22:18:53,324 Started profile Private@17057
2009-03-10 22:18:53,324 Started profile Public@17055
2009-03-10 22:18:53,324 Started profile Agent@17058
2009-03-10 22:18:53,339
2009-03-10 22:18:53,339 Starting ARIS Nameservice 10.1.3.4.271679(Public)
2009-03-10 22:18:53,339
2009-03-10 22:18:53,339 Starting ARIS Eventservice 10.1.3.4.271679(Private)
2009-03-10 22:18:53,355
2009-03-10 22:18:53,355 Starting ARIS Nameservice 10.1.3.4.271679(Private)
2009-03-10 22:18:53,355
2009-03-10 22:18:53,355 Starting DB event initialisation 10.1.3.4.271679(Private)
2009-03-10 22:18:53,417 - event channel is created
2009-03-10 22:18:53,433
2009-03-10 22:18:53,433 Starting Aris LockService 10.1.3.4.271679(Private)
2009-03-10 22:18:53,433 - using mapping 'com.idsscheer.aris.server.dl.mapimpl.ora.AMapping'
2009-03-10 22:18:53,448 - using url 'jdbc:oracle:thin:@LOCALHOST:1521:orcl'
2009-03-10 22:21:53,459 Launch of Aris LockService failed!
2009-03-10 22:21:53,459
2009-03-10 22:21:53,459 [ There have been ERRORS, ARIS Server Site is going down ... ]
2009-03-10 22:21:53,459 Terminating ARIS Server Site ...
2009-03-10 22:21:53,459 Shutting down DB event initialisation ...
2009-03-10 22:21:53,475 Shutting down ARIS Nameservice ...
2009-03-10 22:21:53,475 Shutting down ARIS Eventservice ...
2009-03-10 22:21:53,475 Shutting down ARIS Nameservice ...
2009-03-10 22:21:55,487 ARIS Server Site terminated!
2009-03-10 22:21:55,487
2009-03-10 22:21:55,487 [ ARIS Server Site is down ]
2009-03-10 22:21:55,487
2009-03-10 22:21:58,498 Terminating ARIS Server Site ...
2009-03-10 22:21:58,498 ARIS Server Site terminated!
2009-03-10 22:59:48,606
2009-03-10 22:59:48,606 ARIS Server Site
2009-03-10 22:59:48,606 (c) 2005 IDS Scheer
2009-03-10 22:59:48,606
2009-03-10 22:59:48,606
2009-03-10 22:59:48,606 [ ARIS Server Site Startup process ]
2009-03-10 22:59:48,606
2009-03-10 22:59:48,762 Started profile Private@17057
2009-03-10 22:59:48,762 Started profile Public@17055
2009-03-10 22:59:48,762 Started profile Agent@17058
2009-03-10 22:59:48,762
2009-03-10 22:59:48,762 Starting ARIS Nameservice 10.1.3.4.271679(Public)
2009-03-10 22:59:48,777
2009-03-10 22:59:48,777 Starting ARIS Eventservice 10.1.3.4.271679(Private)
2009-03-10 22:59:48,793
2009-03-10 22:59:48,793 Starting ARIS Nameservice 10.1.3.4.271679(Private)
2009-03-10 22:59:48,793
2009-03-10 22:59:48,793 Starting DB event initialisation 10.1.3.4.271679(Private)
2009-03-10 22:59:48,855 - event channel is created
2009-03-10 22:59:48,855
2009-03-10 22:59:48,871 Starting Aris LockService 10.1.3.4.271679(Private)
2009-03-10 22:59:48,871 - using mapping 'com.idsscheer.aris.server.dl.mapimpl.ora.AMapping'
2009-03-10 22:59:48,887 - using url 'jdbc:oracle:thin:@LOCALHOST:1521:orcl'
2009-03-10 23:02:49,309 Launch of Aris LockService failed!
2009-03-10 23:02:49,309
2009-03-10 23:02:49,309 [ There have been ERRORS, ARIS Server Site is going down ... ]
2009-03-10 23:02:49,309 Terminating ARIS Server Site ...
2009-03-10 23:02:49,309 Shutting down DB event initialisation ...
2009-03-10 23:02:49,309 Shutting down ARIS Nameservice ...
2009-03-10 23:02:49,309 Shutting down ARIS Eventservice ...
2009-03-10 23:02:49,309 Shutting down ARIS Nameservice ...
2009-03-10 23:02:51,321 ARIS Server Site terminated!
2009-03-10 23:02:51,321
2009-03-10 23:02:51,321 [ ARIS Server Site is down ]
2009-03-10 23:02:51,321
2009-03-10 23:02:54,332 Terminating ARIS Server Site ...
2009-03-10 23:02:54,332 ARIS Server Site terminated!
Error Log 2:Exception
2009-03-10 18:19:39,019 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
2009-03-10 18:28:52,307 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
2009-03-10 22:21:53,459 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
2009-03-10 23:02:49,309 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
----------------------------------------------------------------------------------------------------------------------------------------------S1:I uninstalled BPA.
S2: I installed BPA again using the default options by selecting all the default options that the BPA showed during installation. EG. I selected 'Oracle Lite' which was by default an option.
S3: After BPA installation, I also installed BPA Publisher which i had not done last time.
S4: Restated my system and it all works gr8 now.
Actually, the BPA Publisher creats a Repository area so it should have been installed along with the BPA installation. And Since a Repository area was not found it was giving this error message again and again.
Now its all fine . Hopefully, some one else will learn from my mistakes. -
How to extract error message for each output type.
Hi All,
Need your advice on the problem that I have.
Expected Solution:
1. Create an extra column for displaying header output error message from VF02 into a report program.
Steps that i have did:
1. Go to transaction VF02.
2. Enter a billing document number.
3. Hit enter. Click "Goto" > Header> Output
4. Click on the status that is red colour. Click on "processing log".
5. Press "F1" on the red colour message type. (Found out that it is a structure).
Need your advice on the question that I have:
1) How do we know that which "not successfully" process output type belong to which error message class?Hi Brad Bohn,
Thanks for your advice. I am so sorry about that. Thanks so much for your advice. And i have follow your advices and steps given by you. Appreciate it very much.
But for this issue about how to extract message for each output type. I have follow your steps by using SE30 to trace VF03 and I managed to found out that they are using this function module "WFMC_PROTOCOL_SHOW". Need your advice on this, how do we know each different output type with different error message is pulled from?
From my further research and in depth debugging into this function module, i manage to find this global internal table "PROTO_TAB" which stores all the text messages for each output. How does this internal table is populated?
Thanks in advance.
Regards
Shawn
Maybe you are looking for
-
HPlip: "Unable to communicate with the device" error
Hello Arch Community, I've been a user of Arch for a while and most of it just worked out of the box. However, I had my HP 6300 working through a direct connection. But a couple of days ago it just broke. I've tried everything I could think of to mak
-
Verizon, you just did what I thought was the impossible. You made ATT look good. You some how have botched something that was a golden egg. You have completely screwed up, and it's very unacceptable. First, people are wanting to jump ship from t
-
Upgrade Support Package for one Software Component
Dear Experts, I am new with SAP Basis Administrator and I have new task to upgrade EA-HR software component from release 600 sp30 to release 602 sp9. Actually, EA-HR component in Development system already in release 602 sp9 while quality and product
-
Subscription turned into a trial all of a sudden?
I have a yearly subscription to the cloud but just now when I opened PS it says my trial has expired and I have to sign up for a subscription? Any ideas why this is happening? I tried calling customer support but there's a mere 2 hour wait.
-
I have down loaded songs and tv shows on my i phone 4s but i can remove them from my phone. I have transfered purchases and cun ticked sync music and tv shows but still i have the downloaded contenet on my phone. Please help