Local EPM Excel Connection not responding when working with proxy server.

Hi All ,
We were working on a server . Due to some issues we had to use proxy server to connect to the Backend.
But the Local Connections that were made in Excel to log in via EPM Tab is no more working.
Is it something related to Proxy Server.
In that case , how to configure the Local Excel Connections.
Regards,
SHUBHAM

Hi Andy ,
When we connect to EPM Office Add in link in Web Admin , We get basically 3 options, out of which we choose connect EPM Office Add-in for Excel. But that option is not coming. Rather it asks to install EPM addin, while it has been already installed . This problem has been present for a very long time .
So in case of Connecting to Excel Interface , if this option was fine then we could have easily gone to System generated link in Web Admin to connect to EPM Excel interface. But since this option isn't coming so we had to go through making Local Connections.
But given the Proxy server settings the earlier Local EPM Excel Connections are not working.
Regards,
SHUBHAM

Similar Messages

Excel 2013 not responding when doing refresh all for enbedded quires.

System:
Windows 8.1
Intel I7 620 CPU
12 GB ram
Office 2013
Issue 1:
I have a excel file with 29 data from WEB quires. These are quires for stock data and the only difference in them is the ticker symbol. When I request a refresh all Excel goes into a not-responding mode and I have to quit the program to stop it. This same
file ran OK in Excel 2010. I have the data on sheet one and about half the quires on sheet 2 and the remaining quires on sheet 3. Each quire downloads data a small table and cells in sheet one reference cells in sheet two and three. Two cells are accessed
from each table. I had a Microsoft support person on the line today and she had me repair office, which didn't help. I removed Sheet 2 and Sheet 3 and redid all the quires and that didn't help. Each quire can be refreshed individually.
I also have a laptop with Office 2013 and Excel has the same problem with the same file.
Issue 2:
Each row holds information about a given stock and gets current stock price and dividend percent from its quire table. The stock price comes from column A and the dividend percent come from column C two rows below the row the price is in. Every
time a do a refresh the cell that references the data in Column C comes from two rows below the row it should come from. This does not happen for every stock only some of them. The reference to the data from the A column is always correct. This problem was
happening in Excel 2010 too.

Hi,
To your first issue:
Excel 2013 not responding may be caused by some reasons. Let's do some tests to narrow down the issue:
Method 1: Verify/install the latest updates
Method 2: Start Excel in safe mode
Method 3: Investigate possible issues with add-ins
Method 4: Check whether your antivirus software is up to date or is conflicting with Excel
https://support.microsoft.com/kb/2758592/en-gb
If the issue still exists, please upload the event log in the thread, I'll do more deeply
research.
To your second issue, would you like to upload a sample of the Excel file by using SkyDrive? I want to test in my PC.
Regards,
George Zhao
TechNet Community Support

Additional plug ins not displaying when working with ERBI Business Objects.

when working with ERBI Business Objects I am attempting to edit a report which requires Java. When I click on edit I get a bar at the top of the screen that say "Additional plugins are required to display all the media on this page". I click install missing plugins and receive a page that says no suitable plugins were found. I click finish and thus it still won't allow me to edit a report.
Please help

Please go to Java's website in this case to download Java.

Says "did not respond", but works with test servers...

Hi all,
This one is driving me crazy! I recently bought an iSight camera and I'm now wanting to get it working with iChat and AIM. I'm behind a Linux firewall of my own construction (ClarkConnect / Fedora based) and at first I couldn't get it to connect to anything, with repeated errors saying that I "did not respond". However, after doing a lot of reading, I've opened up all of the required ports on the firewall and I can happily connect to the 'appleu3test01, 02, 03' servers.
However, attempting to connect to a PC running AIM brings back the "did not respond" error, and no amount of firewall twiddling seems to make it work. I've connected my Mac directly to the cable modem and this is the only way it will connect, and I've tried connecting to two different PCs in different locations. If I try to connect to a PC with AIM on my local network, there's no problem - I'm straight on - but going through the firewall just doesn't play.
I've also tried the trick of port-forwarding ports 16384-16403 to my Mac, but still no luck. Not tried connecting to a remote Mac with iChat yet, just because I'm the only person I know with all the right kit...
If anyone could lend their expertise I would really appreciate it - and so would my blood pressure! ;o)
Thanks in advance,
Andy.

Hi Zephyr,
With iChat launcged go to the iChat menu.
Log out of AIM
Go to the Preferences in the same menu.
Go to Accounts
Slect the AIm acount in question in the left hand list.
Now Click the Server Settings tab on the right.
This list the main connection port near the top but under the tabs.
Change this from port 5190 to prot 443.
Log back into AIM
Reason.
iChat logs on to AIM on port 5190.
It also uses Port 5190 to Group chat, send file and pics.
It does this over two interent Portocols
Now some modems need to be port forwarded on ports above a threshold of 1024.
Some go further and want Protocols listed.
Of those a small number will not let you Port Forward two protocols on the same port.
So moving the Login and basic text chat stuff to port 443 (a secure port below 1024) the problem is avoided.
9:10 PM Saturday; March 11, 2006

FF 16.0.2 won't work with proxy server

My school district requires using their proxy server. Suddenly FF 16.0.2 no longer will connect to the proxy server, despite all settings configured correctly in System Preferences. Firefox prefs are set to "use system proxy settings". I've also tried Manual proxy settings, and Auto-detect proxy settings for this network. All of those options used to work just fine.
I CAN successfully connect using Safari 6, so it's not the proxy server itself (Safari only uses the System Preferences proxy/network setting).
MBP, OSX 10.8.2, FF 16.0.2, Safari 6.0.2

My school district requires using their proxy server. Suddenly FF 16.0.2 no longer will connect to the proxy server, despite all settings configured correctly in System Preferences. Firefox prefs are set to "use system proxy settings". I've also tried Manual proxy settings, and Auto-detect proxy settings for this network. All of those options used to work just fine.
I CAN successfully connect using Safari 6, so it's not the proxy server itself (Safari only uses the System Preferences proxy/network setting).
MBP, OSX 10.8.2, FF 16.0.2, Safari 6.0.2

FMLA standard hours infotype 2001 not editable when working with date range

Hi All,
The issue described below arises at the Juncture between FMLA Workbench and Absence Infotype IT2001.
When we try to tie a FMLA Request to Absences the process takes us to the Infotype PA2001 screen wherein we would like the Absence Hours Field to be Editable so that we could enter Hours (less than full day).
The process works fine when the FMLA absence is for a single day, i.e. if an employee availed a FMLA leave on a day (whether full day or part of a day) the Absence Hours field (PA2001-STDAZ) is editable and the user can enter any number of hours of his choice.
But the process faces a glitch when the FMLA absence spans over a period of time (i.e. an employee availed a FMLA leave for over a period wherein each day may or may not be a full day absence, in this scenario it would be best if the system allow the user to enter Absence Hours so that the User could enter the exact number of Absence hours correctly. But unfortunately, when an absence spans multiple days the Infotype 2001 screen dynamically turns the Absence Hours field (PA2001-STDAZ) uneditable (grayed out) and the system forcefully enters hours equal to the sum of the work schedule hours for each working day covered in the span of period for which we are trying to enter FMLA Absence Hours.
I have used the USER EXIT and the BADI route and tried to change the Screen Table to editable, but with no luck.
Wondering, if anyone of you could help me out of this glitch.
Thanks in Advance.

Hi,
   I don't think this is possible.
   You cannot make the Hours field editable for a date range.
   I don't think its feasible to enter absence hours on a day basis given a date range.
   Better think of creating a custom infotype to enter absence hours .
   (Design would be : based on the date range entered , say 01.01.2011 to 05.01.2011 , you should get five input enabled
     boxes(dynamically) for five days to enter the absence hours , this is not possible in standard infotype ..... )
Regards,
Srini.

Safari not responding when HTTPS connections are unavailable

I'm using a 13" MBP with 10.7.2 installed, which is setup to sync calendar, address and bookmarks with iCloud. Since last week I've constantly encounter a problem that my Safari 5.1.1 would keep crashing, and I had to delete the ~/Library/Safari/extensions folder to get it back to work.
This situation happened whenever I've switch to wireless connection. In my office we've setup a limited wireless environment that all HTTP/HTTPS connections will be redirected through a proxy. Since last week the proxy server was malfunctioned. All HTTP connections are proceeded normally, but all HTTPS connections will be suspended. I'm not sure but I suspect it's the main reason for the crashing problem.
The syndromes are:
1. When I left Safari open, unplug the ethernet, and turn-on WiFi, everythings goes on normally, until I open an HTTPS web page, for example, https://www.icloud.com. Of course that HTTPS URL will not load, since our proxy is broken; but the connection itself will NOT timeout. I've tried to leave it connecting for 10 minuntes, and it's still there.
2. The statement above may due to a glitch in our proxy server and I can understand that. But the problem is: after I tried to open an HTTPS connection, the Safari will refuse to open any other URLs, including normal HTTP connections. It will just keep "connecting". Meanwhile the FireFox and Chrome can load these HTTP pages normally.
3. If I quit Safari in this situation, Safari will not be able to re-launce: the icon will keep bumping on the dock. I have to force quit Safari and delete extensions folder, so that it can be launched again. But even after Safari re-launced, it still refused to load HTTP pages.
4. Neither reconnecting WiFi, relogin, or switching back to ethernet can fix the problem. I have to restart the whole system to get it back to normal.
It seemed to me that some Safari-related process will keep in the system after Safari is quited. And that process may keep the inactivated HTTPS connections alive in its TCP pool, and blocked all sequence connections, including the iCloud synchronization. And while I force-quit Safari, the extensions.plist file is damaged. That's the only plausible explanation to this situation.
I'm sure this situation is introduced after 10.7.2: it's not the first time our proxy server breakdown, but I've never have this problem before.

I've done some detailed test and now I can give a conclusion:
1. It's confirmed that sequence HTTPS connection will be blocked in Safari and Google Chrome after a failure HTTPS connection (due to proxy). And rebooting is the only way to recover connections.
2. My previous observation is wrong: this is NOT a system wide problem. FireFox is not affected. FireFox will return to normal and all sequence HTTPS connection can be proceeded without any problem when I reconnect to a valid network connection (i.e. ethernet), while the Safari and Google Chrome remained being blocked. And DropBox is NOT affected as well.
3. None of the solutions mentioned in other threads can solve this problem. Checking the "Auto proxy discovery" does not help. Delete ~/Library/Preferences/com.apple.security.revocation.plistfile does not help. Clean Keychain does not help either. I've created another account for testing.
4. It's apparently something related to some system built-in network services. Since the FireFox and DropBox both gets its' own Proxy implementation, while Safari and Google Chrome will take the system settings. It's also worth noting that the POP3-SSL connection in Mail.app is also blocked after a failure HTTPS connection.
Currently the ONLY valid solution is using FireFox instead.

HT4097 my ipad not responding when i connected to pc

my ipad2 not responding when i connected to pc, like no device connection to cpu

Do you mean evil your device is not recognised in iTunes for Windows? If so,
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

Server not responding when connected to Internet

ServerSere ever not responding when connected to internet

Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You may have to re enter your Wi-Fi password.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections
iOS: Wi-Fi settings grayed out or dim

Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals

With ios 8.3 ipad mini apps sometimes do not respond when touched

a new problem occurred with ios 8.3 ipad mini applications sometimes do not respond when touched Fix it in ios 8.4

If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

ITunes not responding when I plug in my iPod

Hey all, I need some help. Recently when I plug my iPod into my PC to update my iPod with the new music that I have loaded into iTunes, as soon as I do iTunes stops working and when I checked in my windows task manager under appplications/status it says iTunes is not responding. when my iPod is not plugged in, iTunes works fine. I can't get past this. Yes I did load the updated software, it didn't help. Does anyone have any suggestions?
Thanks,
Todd

This is also happening to me updated latest version of Itunes. Itunes works fine but doesn't show the ipod when I attach. Tried most of the hints on the web site but nothing is working. Plugged the ipod into my base station and hey presto it works fine. I have also tried top re load the ipod software on the lap top but this isn't working either it asks for the ipod to be plugged in when it is plugged in it doesn't see it. Yet in windows explorer you can see the ipod is connected. Any idea's anyone. Shall i try to install version 6.0.0 of itunes instead of the latest version ?

Itunes keeps not responding when i try to log out of my account

itunes keeps not responding when i try to log out of my account
I have tried uninstalling the itunes program and re Installing it but it has not worked,
Is there anyone that can help me?

Have you tried leaving it to hang for 5 minutes?

Lion Clients 10.7.4 show network accounts are unavailable and server is not responding when binding to Snow Leopard server 10.6.8

Hello,
I am running Snow Leopard Server 10.6.8 and my clients are Lion 10.7.4. While testing I had no issues binding 10.7.4 to our 10.6.8 server's OD. I created a 10.7.4 image to push to all of our machines and in the beginning of last week I was able to push the image and get the machines to bind with OD and apply preferences on these machines through workgroup manager. Towards the end of the week though this stopped working. Now any time I bind a 10.7.4 client to OD it allows me to perform an authenticated bind and the machine shows up in workgroup manager but immediatley after binding the client the status jelly next to the OD server in the directory list is red and says "This server is not responding". If I reboot the client I get a notification that "Network accounts are unavailable" at the login screen. My preferences from workgroup manager are also not applying, which is my main concern because without workgroup manager my mac server is somewhat pointless as we use it for very little else.
I've since tried to bind a snow leopard machine (10.6.8) and this still is working with a green status jelly. I've also built a lion machine from scratch, updated to the 10.7.4 combined update and am still getting the same issue where it shows the server is not responding when binding to OD. I then applied the subsiquent OS update after the 10.7.4 combined update but the problem still persists.
Is anyone else having this issue? Any help would help me keep my sanity.
Thanks,
Dane

Have you had any luck finding a solution to this? The only thing I have found was to unbind and then bind without authentication. Any help with progress on your end would be appreciated!
Nick.

Photoshop CS6 is not responding when leaving PS and coming back again

A weired problem: My new installation of Photoshop CS6 (OS X Mavericks on a new MBP) is not responding when leaving PS and coming back again.
Example: i open a new file in PS - then i click on the desktop - when i go back to PS again, it is not responding to any click on any window (except for the menu bar).
I can solve the problem when i try going back several times or when i go back to PS via the icon in the dock.
But it is still very annoying in a quick workflow.
I would appreciate any idea what i can check more, cause i tried everything and i can’t find this issue on the web…
Thanks…

Problem solved… The troublemaker was the Trackball Works Driver for Kensington trackballs / Expert Mouses…
I’m now using a generic driver for USB devices and everything is fine.

Local EPM Excel Connection not responding when working with proxy server.

Similar Messages

Maybe you are looking for