Local Exchange is FTTC/FTTP enabled but cant order...

Ive been waiting for 2 years to get FTTC, my local exchange is finally accepting orders for FTTC and FTTP. However when i go to order fibre with BT it tells me that its not available, therefore i assume my local cabinet has not been upgraded. How do i find out, if and when my cabinet will be upgraded? and is there a way as a business to pay for FTTC or FTTP to be installed? my current broadband speed is pathetic and trying to run a web business with a poor internet connection is frustrating to say the least.
My postcode is S25 4EW and apparently im on cabinet P12 if that helps.
Thanks for any help or advice.

Hi and welcome to the forum.
Just because an exchange is fibre enabled does not necessary mean that your PCP (cab) has been enabled, these are done in phases, your PCP may be 1st or even last.
Have you checked the infinity website to see if it available on your line? check HERE//
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Similar Messages

Can see wireless network enabled, but cant use internet explorer!

Hi,
I have an MSI Router (RG54G3) and I'm experiencing some problems trying to connect to the Internet. My computer detects very well the signal from the router, I can ping the router or any other machines connected to it, but when I try to ping for instance, www.google.com, I get nothing!
I've already tried every kind of router configuration (with no security, with WEP encryption, etc.), and still I can´t connect to the Internet.
I already set off the windows firewall thinking that might be it... but no.
Can anyone tell me what am I doing wrong?!

dannysearle, you should start your own thread rather than hijack another's.
Is the router connected to the modem properly? The router should be connected to the modem via a lan cable from the modem to the WAN connector on the router. The computers connect via the lan ports or wirelessly.
Does your ISP only allow one computer to connect to the service? Try to connect that computer directly to the modem to see it can get onto the net. Make sure you are running a firewall, windows or another before you do so. But, before you connect to the modem, turn the power off of the modem for a minute, plug it back in, let it get settled and then connect to the computer or turn on the computer. If you can get on the net, then you know it's not a modem issue. If you can't, then contact your ISP. Be
Okay, presuming you can get on the net when the computer is directly connected to the modem, let's try to address the router. Don't connect the router to the modem yet. Directly, physically, connect to the router with a lan cable to the computer that could access the net directly through the modem. Configure your router to clone the MAC address of that computer. Consult the manual for information about doing this. Once you've cloned the MAC address and applied the change, close your browser. Turn off the router. Connect the router to the modem, turn on or plug in the router and let it do it's setup. Once all the lights have settled, try to access the net.

Made a photobook but cant order it

Hi there this is my first post, i made a small photobook on i photo, and would like to get it printed. When i asks for method of payment ie visa, mastercard or american express, i do not have any of these. All i have is my debit card, please can any one tell me a way to order my book and pay for it with my dedit card?. Many Thanks Joe

Hey there. Does your debit card not go through any of the credit card companies? Most debit cards in the U.S. go through either MasterCard or Visa, and if you order something online, you just specify that particular card type, even if it is a debit card.
Check on Apple's site for the customer support for Apple Printing Services, they may have an alternate payment method available for you to use, however I think that it only supports credit and debit cards that go through Visa, Mastercard, Discover or American Express.

Says its available but i cant order

can any mod help me with regards fttc.
says its available but cant order it
any mods online able message me thanks

just walked down road to cab and its humming like a good one.
ill get 80mbs easy
WBC FTTC
Up to 72.4
Up to 20
Available
WBC ADSL 2+
Up to 2.5
1 to 4
Available
WBC ADSL 2+ Annex M
Up to 2.5
Up to 0.5
1 to 4
Available
ADSL Max
Up to 2
1 to 3.5
Available
WBC Fixed Rate
1
Available
Fixed Rate

FTTC enabled but not commercially viable?

What does it mean when BT say that a cabinet I am connected to is already FTTC enabled but is not commercially viable?
Thanks

I have an email from openreach when I asked why all my street can order Infinity and I can't (same exchange and cabinet). I was told the following: "
Thank you for your email. Apologises for the delay. Regarding the delay for STAINTON exchange cabinet 42.
I have gone through the escalation chain email as well however, apologies to say that though the cabinet in customer’s area is FTTC enabled still it is not commercially not viable. Once it will meet the criteria we will able to provide the FTTC line. we can then send the email chain to chase.
I have no idea what this means!!!??? When I call BT I am simply told "it is not available in your area"....when actually it is...just not for my number/house.
Can anyone translate the openreach email into simple layman terms please?

Trying to enable my phone but cant unlock my phone on itunes due to it being disabled

trying to enable my phone on itunes but itunes wont pick it up due to it being locked because i have a password but cant put my password in because its disabled........what to do?

Restore the phone.

My ipad doesnt have airplay how do i activate it where is it my ipad is only a year old iv tried looking everywhere but cant find how to enable it please help

My ipad doesnt have airplay how do i activate it where is it my ipad is only a year old iv tried looking everywhere but cant find how to enable it please help
[email protected]

The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

Outlook 14.4.8 not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox"

Outlook 14.4.8 on iMAC Retina and Yosemite 10.10.2 is not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox".
Accessing Mails with Webbrowser and from Windows Outlook is working correctly.
All Macs (also the ones with OS 10.6.8) do not anymore show any new messages in inbox.
Restarted Server, tried to disable autodiscover on macs and deleting/adding account and repairing database does not fix the problem. Also restarted server several times.
We have the same problem on 2 imacs retina with yosemite and on 2 mac pro with 10.6.8 and different office 2011 versions.
i tried to configure the exchange account in apple mail on yosemite and it also states "connected" and does list some folders but no new mails are getting in.
Windows clients and outlook on them works and syncs fine, and also when connecting via webbrowser at owa it must be a mac-specific/webdav issue.
exchange 2007 Sp3 Version 8.3 (bild 83.6) and Update Rollup 15 for sp3 (automatic updates "HIGH" for server and clients)
there is one update popping up again and again even after everytime successull installation: Windows Mlicious Software Removal Tool x64 - October 2010.
i tried to configure a new user with empty mailbox and configured it with microsoft mail (mac - yosemite) as exchange and was able to send a mail from there (even if quite delayed).
but there are not coming in any mails.
same exchange accounts triggered by imap do work and also via owa.
Exchange Accounts in Outlook for MAC and also in Mail (Yosemite) do show the folder structures but there is no mails showing up. I can send mails from the exchange accounts created but they seem to be processed with a delay of like 15minutes and outlook
is giving error "end of file reached" but messages are send after some time.
Does seem like EWS is extremely slow, to slow perhaps to sync and therefore ending in timeout.
Also i cannot reach the server from externally over ssl https 443. if testing port 443 of exchange from outside the port seems closed even firewall settings of sbs 2008 and sonicwall ports are correctly open.
could it be there is something in regarding webdav which is very slow and leading to timeouts ?
in application log i do have the following two information events every few minute:
The Exchange Web Services started successfully. Event ID 1
and
Process STORE.EXE (PID=3688). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
SERVER.org.local CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
Errors in Application log:
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section
The entry <C:\WSUS\WSUSCONTENT\CONTENTFOLDERACLSCHECK.TXT> in the hash map cannot be updated.
An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 69447
Also outlook 2011 clients are asked by time to time to reenter pwds and errors like "connection is closed. 13"
Faulting application taskeng.exe, version 6.0.6002.18342, time stamp 0x4cd34898, faulting module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0xc000071b, fault offset 0x0000000000082445, process id 0x3288
Certificate Services Client Provider pautoenr.dll raised an exception. Exception code 3221225477.
Backup Exec:
FULL_BACKUP -- The job failed with the following error: A failure occurred querying the Writer status.
Volume Shadow Copy Service error: A critical component required by the Volume Shadow Copy service is not registered. This might happened if an error occurred during Windows setup or during installation of a Shadow Copy provider. The
error returned from CoCreateInstance
Exchange VSS Writer (instance 2d932ef8-6319-4ab8-a45f-1242480b44ad:15) failed with error code 1295 when processing the backup completion event.

Hi,
Since Outlook running on Windows works well, it seems an issue on the Mac side. I suggest ask Mac for help so that you can get more professional suggestions.
More information for your reference:
Please try to verify whether there is any expired certificate from the computer personal store.
If it is the case, please remove them.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

My documents on pages have been deleted from my ipad. I have logged into icloud from a windows computer and can see all my lost documents, but cant seem to get them back on my ipad. HELP!

I opened up my pages app and the document i needed opened up automatically, i turned away from my ipad to log onto my computer only to find when i look back at my ipad that ALL my documents have been deleted!! It is very important i get these back as i have an assignment to hand in tomorrow and ALL my revision is on their for my exam in 4 days time. please please please help me get my documents back onto my ipad? I have logged into icloud on my computer and can see the documents but cant work out how to get them back on my ipad???

http://support.apple.com/kb/HT5824?viewlocale=en_US&locale=en_US

How To Setup A Local Exchange Server Integrated With Office365 For A Single Mailbox

Hello,
We recently migrated to Office365 but had an issue since we need more than 16 simultaneous connections to a single mailbox. Because of this, we need to deploy a local Exchange Server that will be used to host a single mailbox that requires up to 500 simultaneous
connections for a Contact Center application. I'm looking for information on how to setup the local Exchange Server to basically create a local instance of a mailbox hosted on Office 365. So we can have our application open the numerous simultaneous connections
to our local server which will then connection to Office 365 to send/receive email through the mailbox hosted on Office365.
Please let me know if you have any information or resources you can direct me toward.
Thanks,
Chris

Hi,
To deploy local Exchange server integrated with Office 365, we can depend on Exchange Server Deployment Assistant:
http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
Please note that there may be 9646 error if there are many simultaneous connections at the same time.
Thanks,
Angela Shi
TechNet Community Support

I can hear sounds from my laptop but cant hear using headphone

i am having hp pavillion g 6-1220se,serial no:5cd146766w,Product no-a8s15ea#abv.the problem is i can hear sound for some application like skype through my headphone,but cant hear any sound while playing movies .but my system speakers are working fine.please resolve this as early as possible,as i bought this hp only nearly one month ago

Hi,
Please enable Speakers in Playback devices as follows:
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hi i have asked for this help before and it was fixed but cant remember how to do it My ipad has lost sound in certain apps and general typing i remember fixing it through the settings can any one please help it not the mute

Hi I have had this problem before butr cant remember how to fix it . What has happened is certain apps have no sound where as others do I also have no sound when typing.I remember when i last asked for help with this problem it was done through settings. It not on mute Please help me.

You can enable keyboard sounds via Settings > General > Sounds . If they are enabled but you can't hear them then have you checked that you haven't got notifications muted (which will also affect most apps) ?
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Substitution(OBBH) for the Local Exchange Rate

Hi Experts,
I have a problem with the Substitution in OBBH Transaction.
I have created a substitution for the BKPF-KURSF for substituting the Local Exchange rate.
When i debugged the Exit the new exchange rate is copied to the BKPF-KURSF field but before creating
the document it is getting overwritten.
The same Substitution is working in another system where the version is 4.7 but it is not working in ECC.
I would really appreciate if anyone can help me in solving this issue.
Thanks in advance,
Regards,
Chakradhar.

Hello Rob,
I have checked the note but i could not get any solution in that.
It seems the Substitution is working because when i checked in debugging,
the value is getting changed but after coming out of the substitution there is a standard code where the
value is getting over written.
The same code is working fine in 4.7 version.
Could you please let me know if we need to do anything else other than creating the substitution for
ECC version.
Thanks in advance,
Regards,
Chakradhar.

Locale Currency symbol present in Win but not Linux

I am trying to get the currency symbol for the locale en_NZ (English, New Zealand), which is '$'. However, it works on Windows, but not on Linux. On linux it returns "NZD" which basically means it did not find the symbol for the locale. I am using 1.4.0 on both linux and windows, I even tried overwriting jdk/jre/lib/ext/localdata.jar on the linux system with the one on the windows system, and it still doenst find the symbol.
I have also iterated through all available locales for both the linux and Win JREs, and en_NZ is available.
Has anyone come across this problem?
Thanks
- Adam Langley

You have complete faith in that dont you?
It doesnt work. well, it works, but the Symbol is not found. Not on Linux. And the AU symbol is not fuond on Windows when it is on linux. Very annoying really.
I have quite alot of experience with i18n, and cant see why this wouldnt be found. the libraries are available, but not returning the currect data for some reason.
Try both of these.
System.out.println(java.text.NumberFormat.getCurrencyInstance(new Locale("","AU")).getCurrency().getSymbol()); // SHOULD RETURN $, but WIN=AUD, LINUX=$
System.out.println(java.text.NumberFormat.getCurrencyInstance(new Locale("","NZ")).getCurrency().getSymbol()); // SHOULD RETURN $, but WIN=$, LINUX=NZD

Outlook 2013 cannot connect to local Exchange 2013 server

Server name EXCHANGE: is Domain controller for (domainname.local), DNS server and Exchange 2013
Has UCC CA cert successfully installed for (exchange.domainname.com)
External Outlook connections, Web Outlook and autodiscover work fine.
local DNS points autodiscover.domain.com & exchange.domainname.com to internal IP
I have used the above configuration many time for Exch2010/Outlook 2010 and it works great.
PROBLEM: Outlook 2013 clients on a local domain member autoconfigure (through autodiscover) but report a certificate error that the names do not match. When I force the acceptance for the cert error the outlook13 account setups with an exchange server
of "BIG LONG GUID"@domainname.com which cannot resolve and outlook fails.
Please help..

Hi ,
I have recently installed the exchnage 2013 as follow
one CAS and Two mail box DAG
so I was facing similier issue outlook clients were not able not see the CAS
so here are the magic solution :
1-created SRV recored for autodiscover same as acbrown2010 done
above in his reply
2-created
A record for autodiscover and the IP same as CAS IP
3-created
an internal Certificate in CAS server "create a new certificate request " and
include all names such CAS , MB's , Autodiscover this step to avoid the warning message during outlook setup because self sign certificates in ex2013 not helping
after that I have tested the outlook and was working fine NO GUID and NO certificates warning

Local Exchange is FTTC/FTTP enabled but cant order...

Similar Messages

Maybe you are looking for