Local files autoplay issue
Hello everyone,First of all. I'm hoping I'm posting this in the right section since this is my first forum post here. I'm using Spotify for quite a while now and I love it, only this issue has given me many headaches over the past month.I Googled and searched on this forum for people having the same issue, and tried the answers given there. Sadly it hasn't fixed it for me just yet. My issue is that my Local files won't autoplay.This means everytime a local file is next in the playlist, I have to click next song > last played song for it to work. This is okay at first but now it has been going on for quite a bit that I'm getting pretty sick of it. At first everything worked fine untill one moment. Then it stopped working and thought it would be an issue in Spotify and I should just wait for next patch/update since this happened to my Android app earlier.Sadly this wasn't the case and after a bit of searching I found a topic saying the fraunhofer codec could fix the issue.After trying that, sadly still no result. Then I went on and installed the K-Lite codec pack and using the 'fix broken codec' option.But sadly, still no good result.The local files play, but they won't autoplay. So basically when a song ends and a local file is next in line, I have to press next song > previous song everytime. The name of the next song will pop up, but no time will show and the 'bar' will be at the end of the track (where it left off with the previous track) as you can see here: PictureHere the "Ghost Assassin VIP" is a local file and the 'progress bar' still shows from the song that was playing previously. I tried this on different playlists with different files, unlinking files, with both the fraunhofer and K-Lite codecs and with a clean install of both Spotify and the K-Lite codec pack (first spotify without the codec pack, then codec pack afterwards).Maybe good to mention I'm running WIndows 8.1 Pro x64 and Spotify 1.0.6.80.g2a801a53. I don't have a clue what I can try otherwise. Any help or suggestions are truly appreciated. With kind regards,Dennis
Pretty dissapointed that there is no response whatsoever.The issue still persists and it's really bugging me. I have a Premium membership and it's a huge shame I can't use the program to it's full functionality without issues like this.This used to happen before, but an update fixed it. But this time it's back and the updates I received in the past 4 weeks haven't fixed it yet..
Similar Messages
-
Drag local files to repository: bug or Vista-issue?
I'm not very familiar with the Workbench yet; I only used LC Designer so far. Now I'm trying to add (standalone) forms to the repository of a project in the Workbench.
As I understand from WB's Help, it should be possible to drag files from local file system to a folder in the repository. But when trying this it doesn't work (cursor changes into a 'not allowed to drop' sign). Is this some kind of bug in Workbench or is this (again) one of the annoying security-issues of Windows Vista? (Although I'm running on Vista Business as local admin, started WB with admin-rights and have full rights on the repository)
Does anyone has an idea? Is there an alternative way to get this done?This is an OS permission problem. Make sure you have ownership of the HD. Do a web search on how to check. External HD can be a problem for permission.
-
Saving ALV Grid to Local File issue - Missing half of the report
Hi Experts, Good Day.
I have developed an ALV Grid report using class CL_SALV_TABLE which displays 200 Columns and 100+ rows/records. It is displaying well, but when I am saving the output into local file (any type) there only 98 columns are downloading and remaining all the columns are missing.
I would like to know whether there is any restriction for number of columns or what might the problem for it. How can I download all the columns into local file.
Thanks in Adv.
VijayHi,
Thanks for your response. Even though there are multiple ways to send data to local file I believe all three are same. And even I am facing same issue all the ways. Only 98 Columns data is getting downloaded into Files (it might be .txt, .xls, etc.).
After downloading first 98 Columns, I am hiding the downloaded columns and again I am downloading remaining columns. Then I am merging in the Excel file. This is very complicated for the End-User. So, please help me out.
I have used only following methods for displaying ALV.
For initial object/instance:
CL_SALV_TABLE=>FACTORY,
For ALV functions:
CL_SAVL_TABLE->GET_FUNCTIONS,
CL_SALV_FUNCTIONS_LIST->SET_ALL,
For Column heading and Optimized width:
CL_SALV_TABLE->GET_COLUMNS,
CL_SALV_COLUMNS_TABLE->SET_OPTIMIZE,
CL_SALV_COLUMNS_TABLE->GET_COLUMN,
CL_SALV_COLUMN->SET_SHORT_TEXT,
To display grid:
CL_SALV_TABLE->DISPALY.
- Thanks
Vijay -
ALV issue: when save list using Local File command will get run time error!
help!!!!
report list using ALV method when to save this list using Local File.
i will get GETWA_NOT_ASSIGNED run time error information.
how resolve it?
source code :
REPORT ZIFT0103.
TABLES : MARA,MARC,CDHDR,CDPOS,MAKT.
******DEVK909212****************
****利用工厂来区分不同的SERVER的FTP ADDRESS ,user ,PASSWORD
DATA: FTP_WERKS LIKE MARC-WERKS.
********定义一个RANGE用来抓取MARC的信息
RANGES:R_MATNR FOR MARA-MATNR OCCURS 0.
********定义一个INTERNAL TABLE 来抓取MARC 的信息
DATA:BEGIN OF IT_MARC OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
USERNAME TYPE CDHDR-USERNAME,
UDATE TYPE CDHDR-UDATE,
FLAG_UI TYPE C,
END OF IT_MARC.
*******定义存放北京的数据的变量
DATA : BEGIN OF FTP_BEIJING OCCURS 0 ,
MATNR(25) ,
MATNR1(25) ,
MAKTX(30) ,
END OF FTP_BEIJING .
******定义福清的数据变量
DATA : BEGIN OF FTP_FUQING OCCURS 0 ,
MATNR(25) ,
MATNR1(25) ,
MAKTX(30) ,
END OF FTP_FUQING .
*******DEVK909212*****************
DATA : BEGIN OF FTP_ITEMDOC1 OCCURS 0 ,
MATNR(25) ,
MAKTX(30) ,
END OF FTP_ITEMDOC1 .
DATA : BEGIN OF FTP_ITEMDOC OCCURS 0 ,
MATNR(25) ,
MATNR1(25) ,
MAKTX(30) ,
END OF FTP_ITEMDOC .
DATA: WA_ZMSGTA TYPE ZMSGTA ,
l_ersda like MARA-ERSDA .
***********DEVK909553********************
****用来决定执行FTP还是显示LIST**********
DATA:g_tcode_flag.
***********DEVK909553********************
Error message process ******************************
DEFINE EXPLAIN_MSG.
break soe_richard.
CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
EXPORTING
ID = &1 "SY-MSGID
NUMBER = &2 "SY-MSGNO
LANGUAGE = SY-LANGU
TEXTFORMAT = &3
LINKPATTERN =
MESSAGE_V1 = &4 "SY-MSGV1
MESSAGE_V2 = &5 "SY-MSGV2
MESSAGE_V3 = &6 "SY-MSGV3
MESSAGE_V4 = &7 "SY-MSGV4
IMPORTING
MESSAGE = &8 "WA_ZMSGTA-MSE1
RETURN =
TABLES
TEXT =
END-OF-DEFINITION.
DEFINE ERROR_MSG_UPDATA.
CALL FUNCTION 'ZINSERT_MSG' "IN UPDATE TASK
EXPORTING
XZMSGTA = &1 "WA_ZMSGTA
EXCEPTIONS
UPDATE_ERROR = 1
OTHERS = 2.
END-OF-DEFINITION.
IF SY-TCODE = 'ZIFT103' .
g_tcode_flag = 'L'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = '请耐心等候,系统正在抓数据'.
ENDIF.
l_ersda = sy-datum - 1 . "取前一天产生的物料号码。
DATA:BEGIN OF it_change OCCURS 0,
OBJECTID TYPE CDHDR-OBJECTID,
USERNAME TYPE CDHDR-USERNAME,
UDATE TYPE CDHDR-UDATE,
TABKEY TYPE CDPOS-TABKEY,
END OF it_change.
DATA:BEGIN OF it_cDhdr OCCURS 0,
OBJECTID type CDHDR-OBJECTID,
CHANGENR TYPE CDHDR-CHANGENR,
USERNAME TYPE CDHDR-USERNAME,
UDATE TYPE CDHDR-UDATE,
END OF it_cdhdr.
DATA:search_len TYPE I.
DATA:BEGIN of it_insert OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
END OF it_insert.
DATA:BEGIN OF it_MAKT OCCURS 0,
MATNR TYPE MAKT-MATNR,
MAKTX TYPE MAKT-MAKTX,
END OF it_makt.
DATA IT_MARA TYPE TABLE OF MARA WITH HEADER LINE.
DATA:BEGIN OF IT_OUT OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
MTART TYPE MARA-MTART,
MEINS TYPE MARA-MEINS,
MATKL TYPE MARA-MATKL,
MAKTX TYPE MAKT-MAKTX,
PSTAT TYPE MARA-PSTAT,
BRGEW TYPE MARA-BRGEW,
NTGEW TYPE MARA-NTGEW,
GEWEI TYPE MARA-GEWEI,
FERTH TYPE MARA-FERTH,
KZUMW TYPE MARA-KZUMW,
ERNAM TYPE MARA-ERNAM,
ERSDA TYPE MARA-ERSDA,
END OF IT_OUT.
*-- DECLARE DATA FOR ALV
TYPE-POOLS: slis.
DATA : g_variant LIKE disvariant,
g_save(1) TYPE c,
g_exit(1) TYPE c,
gx_variant LIKE disvariant.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE, "
gt_events TYPE slis_t_event,
gt_list_top_of_page TYPE slis_t_listheader,
gs_print TYPE slis_print_alv,
gs_layout TYPE slis_layout_alv .
******只能抓出系统有做更改的数据***************
******而第一次INSERT MARA的数据抓不出来********
START-OF-SELECTION.
SELECT AOBJECTID AUSERNAME AUDATE BTABKEY
INTO TABLE it_change
FROM ( CDPOS AS B INNER JOIN CDHDR AS A ON
AOBJECTCLAS = BOBJECTCLAS AND
AOBJECTID = BOBJECTID AND
ACHANGENR = BCHANGENR )
WHERE A~OBJECTCLAS = 'MATERIAL'
AND A~UDATE = l_ersda
AND B~TABNAME = 'MARC'
AND B~CHNGIND = 'I'.
LOOP AT it_change.
search_len = STRLEN( it_change-TABKEY ).
search_len = search_len - 4.
IF search_len > 0.
IT_MARC-WERKS = it_change-TABKEY+search_len(4).
ENDIF.
IT_MARC-MATNR = it_change-objectid+0(18).
IT_MARC-USERNAME = it_change-username.
IT_MARC-UDATE = It_change-udate.
IT_MARC-FLAG_UI = 'U'.
APPEND IT_MARC.
CLEAR IT_MARC.
CLEAR R_MATNR.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = IT_MARC-MATNR.
APPEND R_MATNR.
ENDLOOP.
****CDPOS is Cluster TABLE 所以没有办法用INNER JOIN******
SELECT OBJECTID CHANGENR USERNAME UDATE
INTO TABLE it_cdhdr
FROM CDHDR
WHERE OBJECTCLAS = 'MATERIAL'
AND UDATE = l_ersda.
AND TCODE = 'MM02'.
LOOP AT IT_cdhdr.
SELECT * FROM CDPOS
WHERE OBJECTCLAS = 'MATERIAL'
AND OBJECTID = IT_CDHDR-OBJECTID
AND CHANGENR = IT_CDHDR-CHANGENR
AND TABNAME = 'MARC'
AND CHNGIND = 'I'.
search_len = STRLEN( CDPOS-TABKEY ).
search_len = search_len - 4.
IF search_len > 0.
IT_MARC-WERKS = CDPOS-TABKEY+search_len(4).
ENDIF.
IT_MARC-MATNR = IT_cdhdr-objectid+0(18).
IT_MARC-USERNAME = IT_cdhdr-username.
IT_MARC-UDATE = IT_cdhdr-udate.
IT_MARC-FLAG_UI = 'U'.
APPEND IT_MARC.
CLEAR IT_MARC.
CLEAR R_MATNR.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = IT_MARC-MATNR.
APPEND R_MATNR.
CLEAR IT_MARC.
ENDSELECT.
ENDLOOP.
IF g_tcode_flag = 'L'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 20
TEXT = '处理好当天CHANGE的数据'.
ENDIF.
*******抓当天做了INSERT的数据*************
*******不需要***********************
SELECT BMATNR BWERKS INTO TABLE IT_INSERT
FROM MARC AS B JOIN MARA AS A
ON AMATNR = BMATNR
WHERE A~ERSDA = l_ersda.
LOOP AT IT_INSERT.
IT_MARC-MATNR = IT_INSERT-MATNR.
IT_MARC-WERKS = IT_INSERT-WERKS.
IT_MARC-FLAG_UI = 'I'.
APPEND IT_MARC.
CLEAR IT_MARC.
CLEAR R_MATNR.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = IT_MARC-MATNR.
APPEND R_MATNR.
ENDLOOP.
IF g_tcode_flag = 'L'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 40
TEXT = '处理好当天INSERT的数据'.
ENDIF.
IF g_tcode_flag = 'L'.
PERFORM get_MAKTX.
PERFORM get_mara.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 100
TEXT = '处理好数据,并开始显示数据'.
PERFORM do_data.
PERFORM display_alv.
ELSE.
PERFORM get_MAKTX.
PERFORM do_ftp.
ENDIF.
*& Form get_marktx
text
FORM get_maktx.
SELECT MATNR MAKTX INTO TABLE IT_MAKT FROM MAKT
WHERE MATNR IN R_MATNR AND SPRAS = '1'.
ENDFORM. "get_marktx
*& Form get_mara
text
FORM get_mara.
SELECT * INTO TABLE it_mara FROM MARA
WHERE MATNR IN R_MATNR.
ENDFORM. "get_mara
*& Form do_data
text
FORM do_data.
SORT IT_MARC BY MATNR WERKS.
DELETE ADJACENT DUPLICATES FROM IT_MARC COMPARING MATNR WERKS.
LOOP AT IT_MARC.
CLEAR IT_MAKT.
CLEAR IT_MARA.
READ TABLE IT_MAKT WITH KEY MATNR = IT_MARC-MATNR.
READ TABLE IT_MARA WITH KEY MATNR = IT_MARC-MATNR.
MOVE-CORRESPONDING IT_MARA TO IT_OUT.
IT_OUT-MAKTX = IT_MAKT-MAKTX.
IT_OUT-WERKS = IT_MARC-WERKS.
IF IT_MARC-FLAG_UI = 'U'.
IT_OUT-ERNAM = IT_MARC-USERNAME.
ENDIF.
APPEND IT_OUT.
CLEAR IT_OUT.
ENDLOOP.
ENDFORM. "do_data
*SELECT AMATNR BMAKTX INTO CORRESPONDING
*FIELDS OF FTP_ITEMDOC1 FROM MARA AS A JOIN MAKT AS B
*ON AMATNR = BMATNR WHERE A~ERSDA = l_ersda
*AND B~SPRAS = '1' . "代表为中文说明。
APPEND FTP_ITEMDOC1.
*******DEVK909212****************
*******添加RANGE*****************
CLEAR R_MATNR.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = FTP_ITEMDOC1-MATNR.
APPEND R_MATNR.
CLEAR FTP_ITEMDOC1.
*******DEVK909212****************
*ENDSELECT.
*******DEVK909212****************
****get WERKS information from MARC*******
*SELECT MATNR WERKS INTO TABLE IT_MARC
*FROM MARC
*WHERE MATNR IN R_MATNR.
*******DEVK909212****************
******DEVK909212****************
**MARK**************************
*LOOP AT FTP_ITEMDOC1 .
MOVE : FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR,
FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR1,
FTP_ITEMDOC1-MAKTX TO FTP_ITEMDOC-MAKTX.
APPEND FTP_ITEMDOC.
CLEAR FTP_ITEMDOC.
*ENDLOOP.
******DEVK909212****************
******DEVK909212***********************************
**根据IT_MARC中信息,往北京和福清的TABLE写数据*****
FORM do_ftp.
LOOP AT IT_MARC.
***福清的
IF IT_MARC-WERKS = '1010' OR IT_MARC-WERKS = '1020'
OR IT_MARC-WERKS = '1023' .
READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
MOVE : FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR,
FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR1,
FTP_ITEMDOC1-MAKTX TO FTP_FUQING-MAKTX.
CLEAR IT_MAKT.
READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
MOVE : IT_MARC-MATNR TO FTP_FUQING-MATNR,
IT_MARC-MATNR TO FTP_FUQING-MATNR1,
IT_MAKT-MAKTX TO FTP_FUQING-MAKTX.
APPEND FTP_FUQING.
CLEAR FTP_FUQING.
ENDIF.
***北京的
IF IT_MARC-WERKS = '1041' OR IT_MARC-WERKS = '1042'.
READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
MOVE : FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR,
FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR1,
FTP_ITEMDOC1-MAKTX TO FTP_BEIJING-MAKTX.
CLEAR IT_MAKT.
READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
MOVE : IT_MARC-MATNR TO FTP_BEIJING-MATNR,
IT_MARC-MATNR TO FTP_BEIJING-MATNR1,
IT_MAKT-MAKTX TO FTP_BEIJING-MAKTX.
APPEND FTP_BEIJING.
CLEAR FTP_BEIJING.
ENDIF.
ENDLOOP.
****清楚重复的数据**********
SORT FTP_FUQING.
DELETE ADJACENT DUPLICATES FROM FTP_FUQING.
SORT FTP_BEIJING.
DELETE ADJACENT DUPLICATES FROM FTP_BEIJING.
***传送数据********
REFRESH FTP_ITEMDOC.
FTP_ITEMDOC[] = FTP_FUQING[].
FTP_WERKS = '1010'.
PERFORM ftp_work.
REFRESH FTP_ITEMDOC.
FTP_ITEMDOC[] = FTP_BEIJING[].
FTP_WERKS = '1041'.
PERFORM ftp_work.
******DEVK909212***********************************
ENDFORM. "do_ftp
*& Form ftp_work
把以前FTP的工作做一个FORM
*******DEVK909212**************************
FORM ftp_work.
*******DEVK909212**************************
CHECK FTP_ITEMDOC[] IS NOT INITIAL.
FTP function *****************************************************
DATA : HDL TYPE I,
L_SLEN TYPE I ,
ERROR,
KEY TYPE I VALUE 26101957,
DEST TYPE RFCDES-RFCDEST VALUE 'SAPFTPA'.
DATA: FTP_RESULT TYPE TABLE OF TEXT.
DATA: P_FILE TYPE RLGRAP-FILENAME.
DATA: L_USER(16) TYPE C VALUE 'SFIS',
L_PWD(16) TYPE C VALUE 'SFIS',
L_HOST(16) TYPE C VALUE '172.16.31.17'.
*******DEVK909212**************************
*****根据不同的工厂来抓FTP的信息
CALL FUNCTION 'Z_FTP_SFIS'
EXPORTING
BLART = 'S'
WERKS = FTP_WERKS
IMPORTING
HOST = L_HOST
USER1 = L_USER
PASS1 = L_PWD.
*******DEVK909212**************************
CONCATENATE l_ersda '.KP' INTO P_FILE.
SET EXTENDED CHECK OFF.
ERROR = 0.
CHECK HDL IS INITIAL.
Connect to server
L_SLEN = STRLEN( L_PWD ).
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = L_PWD
SOURCELEN = L_SLEN
KEY = KEY
IMPORTING
DESTINATION = L_PWD.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
TEXT = 'Connect to FTP Server'.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = L_USER
PASSWORD = L_PWD
HOST = L_HOST
RFC_DESTINATION = DEST
IMPORTING
HANDLE = HDL
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MOVE: 'B' TO WA_ZMSGTA-BLART,
l_ersda TO WA_ZMSGTA-REFNUMBER,
SY-MSGTY TO WA_ZMSGTA-MSGTY,
'MARA' TO WA_ZMSGTA-TBMA_VAL.
EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
SY-MSGV4 WA_ZMSGTA-MSE1.
ERROR_MSG_UPDATA WA_ZMSGTA.
EXIT.
ENDIF.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = HDL
COMMAND = 'ascii'
TABLES
DATA = FTP_RESULT
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3.
IF SY-SUBRC <> 0.
EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
SY-MSGV4 WA_ZMSGTA-MSE1.
MOVE: 'B' TO WA_ZMSGTA-BLART,
l_ersda TO WA_ZMSGTA-REFNUMBER,
SY-MSGTY TO WA_ZMSGTA-MSGTY,
'MARA' TO WA_ZMSGTA-TBMA_VAL.
ERROR_MSG_UPDATA WA_ZMSGTA.
EXIT.
ENDIF.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
HANDLE = HDL
FNAME = P_FILE
CHARACTER_MODE = 'X'
TABLES
TEXT = FTP_ITEMDOC
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
SY-MSGV4 WA_ZMSGTA-MSE1.
MOVE: 'B' TO WA_ZMSGTA-BLART,
l_ersda TO WA_ZMSGTA-REFNUMBER,
SY-MSGTY TO WA_ZMSGTA-MSGTY,
'MARA' TO WA_ZMSGTA-TBMA_VAL.
ERROR_MSG_UPDATA WA_ZMSGTA.
EXIT.
ENDIF.
*******DEVK909212**************************
*******CLOSE FTP******************
CHECK NOT HDL IS INITIAL.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = HDL.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
DESTINATION = DEST
EXCEPTIONS
OTHERS = 1.
CLEAR HDL.
ENDFORM. "ftp_work
*******DEVK909212**************************
FORM DISPLAY_ALV .
*-- PREPARE ALV DATA
PERFORM EVENTTAB_BUILD USING GT_EVENTS[].
PERFORM COMMENT_BUILD USING GT_LIST_TOP_OF_PAGE[].
*-- LAYOUT SETTING
PERFORM PREPARE_ALV_FIELD USING GT_FIELDCAT[].
*-- ALV DISPLAY
PERFORM CALL_REUSE_ALV_GRID_DISPLAY.
ENDFORM. " display_alv
*& Form eventtab_build
text
-->P_GT_EVENTS[] text
FORM EVENTTAB_BUILD USING PT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = PT_EVENTS.
READ TABLE PT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
LS_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY PT_EVENTS FROM LS_EVENT INDEX SY-TABIX.
ENDIF.
ENDFORM. " eventtab_build
*& Form comment_build
text
-->P_GT_LIST_TOP_OF_PAGE[] text
FORM COMMENT_BUILD USING PT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
L_DATE(30),
l_v_BWKEY like T001W-BWKEY, "Valuation area
l_v_BUKRS like T001K-BUKRS. "Firm/Company
Listenerschrift: Typ H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
LS_LINE-KEY: not used for this type
select single BWKEY
into l_v_BWKEY
from t001w
where WERKS IN s_WERKS.
select single BUKRS
into l_v_BUKRS
from t001k
where BWKEY = l_v_BWKEY.
SELECT SINGLE butxt INTO LS_LINE-INFO
FROM t001
WHERE bukrs = l_v_BUKRS.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
Kopfinfo: Typ S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '报表名称:'.
LS_LINE-INFO = SY-TITLE.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '打印日期:'.
WRITE SY-DATUM TO LS_LINE-INFO.
ls_line-info = sy-datum.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '打印時間:'.
WRITE SY-UZEIT TO LS_LINE-INFO.
ls_line-info = sy-uzeit.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '使用者:'.
LS_LINE-INFO = SY-UNAME.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
ENDFORM. " comment_build
*& Form prepare_alv_field
text
-->P_GT_FIELDCAT[] text
FORM PREPARE_ALV_FIELD USING P_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: LS_LINE TYPE SLIS_FIELDCAT_ALV.
*-- DEFINE MARCO
DEFINE APPEND_ALV_FIELD.
CLEAR LS_LINE.
LS_LINE-FIELDNAME = &1.
LS_LINE-TABNAME = &2.
LS_LINE-REPTEXT_DDIC = &3.
LS_LINE-SELTEXT_L = &3.
LS_LINE-SELTEXT_M = &3.
LS_LINE-SELTEXT_S = &3.
LS_LINE-QFIELDNAME = &4.
LS_LINE-QTABNAME = &5.
LS_LINE-NO_OUT = &6.
LS_LINE-NO_ZERO = &7.
LS_LINE-OUTPUTLEN = &8.
APPEND LS_LINE TO P_FIELDCAT.
END-OF-DEFINITION.
APPEND_ALV_FIELD: 'MATNR' 'IT_OUT' '料号'
'O' 'X' ''.
APPEND_ALV_FIELD: 'WERKS' 'IT_OUT' '工厂'
'O' 'X' ''.
APPEND_ALV_FIELD: 'MTART' 'IT_OUT' 'MTyp'
'O' 'X' ''.
APPEND_ALV_FIELD: 'MEINS' 'IT_OUT' 'BUn'
'O' 'X' ''.
APPEND_ALV_FIELD: 'MATKL' 'IT_OUT' '物料组\分群码'
'O' 'X' ''.
APPEND_ALV_FIELD: 'MATKX' 'IT_OUT' '物料描述'
'O' 'X' ''.
APPEND_ALV_FIELD: 'PSTAT' 'IT_OUT' '维护状态'
'O' 'X' ''.
APPEND_ALV_FIELD: 'BRGEW' 'IT_OUT' '毛重'
'O' 'X' ''.
APPEND_ALV_FIELD: 'NTGEW' 'IT_OUT' '净重'
'O' 'X' ''.
APPEND_ALV_FIELD: 'GEWEI' 'IT_OUT' 'WUn'
'O' 'X' ''.
APPEND_ALV_FIELD: 'FERTH' 'IT_OUT' '对外机种名'
'O' 'X' ''.
APPEND_ALV_FIELD: 'KZUMW' 'IT_OUT' '高关税标识'
'O' 'X' ''.
APPEND_ALV_FIELD: 'ERNAM' 'IT_OUT' '创建者'
'O' 'X' ''.
APPEND_ALV_FIELD: 'ERSDA' 'IT_OUT' '创建日期'
'O' 'X' ''.
ENDFORM. " prepare_alv_field
*& Form call_reuse_alv_grid_display
text
--> p1 text
<-- p2 text
FORM CALL_REUSE_ALV_GRID_DISPLAY .
gs_layout-f2code = 'DISPLAY'.
gs_print-no_print_listinfos = 'X'.
gs_layout-colwidth_optimize = 'X'. "列宽度自动根据内容优化
gs_layout-f2code = '&ETA'. "double check弹出详细信息
gs_layout-zebra = 'X'. "清单条纹显示
gs_layout-no_vline = ''. "是否显示列间隔线
gs_layout-box_fieldname = ''. "是否显示checkbox
gs_layout-confirmation_prompt = ''. "推出清单是否提示
gs_layout-detail_titlebar = '详细信息'."详细清单的标题
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-CPROG
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_CALLBACK_PF_STATUS_SET = 'ALV_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'ALV_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = GT_LIST_TOP_OF_PAGE[]
IT_FIELDCAT = GT_FIELDCAT[]
IT_EVENTS = GT_EVENTS[]
I_STRUCTURE_NAME = 'IT_OUT'
I_SAVE = 'A'
IS_LAYOUT = GS_LAYOUT
IS_PRINT = GS_PRINT
TABLES
T_OUTTAB = IT_OUT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_reuse_alv_grid_display
*& Form PREPARE_ALV_FIELD
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM. "TOP_OF_PAGEHi,
Please check your field catalog and refer field names once again.
Check spelling, or Check strucutre properly.
There are something wrong in your catalog definition
aRs. -
ESS issue, local file button
Hello Team,
In a ESS report output, i try to download the output list to local file using 'Local file' button. The pop up box appears with 'unconverted', Excel etc. But if i click either OK , pop up box for java appears (attached). After that nothing happens either if i click OK or Cancel.
32 bit java run time environment for Java 7 has been installed in the system.
Can you please suggest what needs to be done. Thanks in advance.
Regards,
AnandHello Anand,
Please check the following note:
1920875 - ITS Up/Down: different problems in java plugin because of new security restrictions.
Regards,
Wen Peng -
BrowserLab won't work with local files in DW CS5
Any issue report you make about BrowserLab on these forums should minimally contain the following information. If it doesn't, the first response you get from us will likely just ask for the missing info anyway
Subject
A descriptive summary of the issue.
The body should contain:
Problem Description
A brief description of the bug or issue
Steps to Recreate
The steps we should follow to reproduce your issue. Minimally include all the following:
Does the issue happen every time, is it sporadic, or did it only happen once.
Are you testing on Mac or Windows?
Are you using the main BrowserLab interface, testing via Dreamweaver integration (and if so, what version of DW), or using the BrowserLab for Firebug add-on?
What is the URL you're testing against. If it's not public, let us know and let us know if you can send us the page source.
Expected Results
Based on the steps you described, what you thought should happen
Actual Results
What actually did happen
Thanks everyone,
Mark
Using BrowserLab in DW 11.0 Build 4964, BrowserLab can't seem to work. Some not very intuitive places I have checked include making sure the signon credentials are in the CSLive window in DW.
In preview local/browser, the following messages are disappointing me:
Timed Out, Failed to Authenticate with Browserlab
Session Expired, See Browser
It is on a Mac, 10.6.7, using DW integrated testing. I can log into browserlab and put a public URL, but I don't think that's going to be much better for me than having VMWare and installing free browsers on Mac and Windows, and given the failures here that would be better for local file checks too. I write this because I wonder if I will be disappointed trying to get this to work and then find out I have to pay a yearly subscription to CSLive to be able to keep using it.
This is on a private URL and I can send the page source, but I don't think its the page that is causing the issue.
Expected results:
Able to preview page in any browser of my choosing
Actual results:
Spent the last two hours navigating help, googling possible solutions, getting many errors trying to navigate the Adobe help and forums, continually signing in on each adobe page I open. Expecting to have to reauthenticate to post this message. (Updated extension manager as well).Hi,
First, there is no charge currently for using CSLive and there won't be any charge for another year.
Second, based on what you're saying about the behavior you're seeing with BrowserLab and the issues you had with continually having to sign onto the Adobe pages, it's a strong indication that you've got cookies disabled in your browser or that something on your machine is deleting/expiring the cookies we are trying to set. What browser/version are you using and what kinds of permissions have you got set for cookies in that browser? Can you check that and change your cookie permissions for Adobe.com at least?
Let me know if that helps or not,
Mark -
How to pass the local file name to the workflow in TC OAWD
Hi everybody!
I have to pass the local file name of the image as a parameter to a workflow in TC OAWD.
By debugging I found the FM which starts the workflow - 'ARCHIV_PROCESS_FAXINPUT' . It has two importing parameters : FRONTENDPATH and BASICFILENAME, but they are not used by calling the FM.
Do you have an idea if there is a DDIC table, which contains the local file name or another way to solve the issue.
Thank you in advance.Hi,
Not sure of what you want.
Have a look at v$session view. Machine column is maybe what you're looking for.
If you want to retrieve the local host executing remote desktop, it's actually not possible natievely, since it's still remote host that is connecting to the database.
Hope it helps. -
Local Files are deleted upon disconnecting from project
Running Version Cue CS3 3.1.0 with latest Bridge. (PowerMac G5 - OSX 10.4.11)
Im running the VC server on my local machine. Intention is for only myself to use it for version control.
I created a project, added my files... the standard local file path is ~/Documents/Version Cue/projectname
2 issues, perhaps the same issue
whenever i attempt to disconnect from the project... the local files are deleted...
so, if i had set a custom path for my projects local files, VC immediately deletes the files, and next time trying to connect, the local file path is reset to the ~/Documents/Version Cue/projectname
Is this how VC is supposed to function?
Any help or insight is greatly appreciated!!! Thank you in advanceRunning Version Cue CS3 3.1.0 with latest Bridge. (PowerMac G5 - OSX 10.4.11)
Im running the VC server on my local machine. Intention is for only myself to use it for version control.
I created a project, added my files... the standard local file path is ~/Documents/Version Cue/projectname
2 issues, perhaps the same issue
whenever i attempt to disconnect from the project... the local files are deleted...
so, if i had set a custom path for my projects local files, VC immediately deletes the files, and next time trying to connect, the local file path is reset to the ~/Documents/Version Cue/projectname
Is this how VC is supposed to function?
Any help or insight is greatly appreciated!!! Thank you in advance -
Alv to excel down load through local file (cntrl + shift + F9 ) Urgent
Hello all ,
In ALV i am getting the out put correct . But when i try to download it to excel . Though local file -- Spread sheet .
In ALV i am getting the feilds like this
Material description of BOM component material (MAKT-MAKTX
Base Unit of Measure of BOM component material (MARA-MEINS)
X-plant material status of BOM component material (MARA-MSTAE)
BOM base quantity (STKO-BMENG)
UoM of BOM base quantity (STKO-BMEIN)
BOM component quantity (STPO-MENGE)
UoM of BOM component quantity (STPO-MEINS)
Relevant for sales indicator of BOM component material (STPO-RVREL)
But in Excel out put i am getting like this :
Material description of BOM component ma
UoM of BOM component quantity
UoM of BOM component quantity
BOM base quantity
UoM of BOM base quantity
BOM component quantity
Relevant for sales indicator of BOM comp
I am not at all getting Why it is comming like this .
Please let me know if any one can help me on this issue .
Thanks and Regards ,
Prem .In ur .....FORM alv_fieldcatalog-settings .
fieldcatalog-fieldname = 'MAKTX'
fieldcatalog-col_pos = 1.
fieldcatalog-fieldname = 'MEINS'
fieldcatalog-col_pos = 2.
add the fieldcatalog-col_pos statement in ur code...
reward if useful. -
Local files not playing on Windows 8
If you've installed Windows 8 on your computer instead of the previous Windows 7, you may experience an issue where none of your local files will play.
First try reinstalling Spotify, installing Quicktime, deleting all the Local files and unchecking everything in Preferences related to Local Files. Finally, make sure the files are a supported file format.
We've also noticed that installing the Windows Media feature pack helped many users where the above suggestions did not. You can find the feature pack here:
http://support.microsoft.com/kb/2835517Hi,
If all you're missing is the required codec, there are plenty of free software offerings that will allow you to play DVDs - one example would be the application on the link below.
http://www.videolan.org/index.html
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Downloading Report output to a Local File
Hi,
I want to download the my ALV Report output to a local file.
I am following the menu options from ALV output:
LIST --> Export --> Local File --> Unconverted Format --> I entered a text file name on the desktop.
The data is being downloaded to Local text file, but some columns are missing.
I don't know what is the reason? Can anybody tell what may be the reason?
Has anybody come across this issue earlier?
Please let me know the solution.
Thanks in advance,
Sreenivas Reddy.Hi vik,
I have followed the same steps
LIST --> Export --> Local File --> Here I enter test.xls file on the desktop.
I am missing the same columns, The heading are displayed for all fields, but data for some initial columns are missing.
Can you please through some light on this error.
Thanks,
Sreeni. -
No longer able to follow local file links.
In previous versions of firefox ( 28 and Earlier ) I was able to follow local file links by whitelisting them in the user preferences file as shown here: http://kb.mozillazine.org/Links_to_local_pages_do_not_work
This functionality has ceased to work with the update.You might find a similar bug already posted, but if not, sure, others are going to have the issue.
I guess one question is implementation. What mechanism is replacing capability preferences? If there isn't something that general purpose, what kind of site-level permission could be relevant?
And if the need is not clear, what are the use cases for http:// to file:// access that the developers need to consider? Or is it for file:// to file:// access that's most critical? -
File Permission issues on a windows server after updating
Hello,
But, I just updated Adobe InDesign and have a problem opening files on the network. This was not an issue until the upgrade.
Strangely, it’s JUST InDesign, opening files on the network. Doesn’t happen to local files, other Adobe products, or the MacBook we have on site.
JUST InDesign on the new iMac and opening files on the network.
I’m stopped the first time and have to try it again. It seems to work every time on the second try.
Any ideas please. I am stumped.I am having the same issues here. I am also having issues saving a new file onto a server. Along with packaging onto the server. Only started after this update. My coworker is having these same issues after updating as well.
-
Hyperlink to pdf on the local file system
Hello,
I'm using Oracle Reports 6i. I'm trying to set hyperlinks in my report through the pl/sql command srw.set_hyperlink to another pdf document.
When I set the hyperlink to a URL, eg, http://localhost/document.pdf#dest, it works fine, the pdf opens in IE to the destination. Now when I specify the link to a file on the local file system, eg, file:///c|/document.pdf#dest, I get a file not found within IE. If I take out the destination, it works ok, that is, it opens up the document with IE.
What am I doing wrong here? Is there a way to link a report to another pdf to a named destination within the local file system?
Thanks,
RickyRicky,
This is more of IE - PDF issue I guess. Also this problem is seen more specifically for IE + File protocol + PDF
Nothing related to the Reports PDF here. You can try by just referring a PDF section through file protocal in IE and you would see the same behaviour
Thanks
Rajesh -
Mail the local files as attachment and some body text
hello Exprests
I have a requirement where i have to mail the local files as attachment and some body text also...
I am using the following code, and the problem is that i am getting a blank TXT as an attachment.
Please help me solve this issue, if u change the spool request no., client & put ur mail id and execute it u will find that apart from the pdf we get an un wanted attachment also..
Please suggest me the solution..
WORK TABLE AREAS
TABLES: tsp01.
INTERNAL TABLES
DATA: lt_rec_tab LIKE STANDARD TABLE OF soos1 WITH HEADER LINE,
lt_note_text LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_attachments LIKE STANDARD TABLE OF sood5 WITH HEADER LINE.
DATA: lt_objcont LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_objhead LIKE STANDARD TABLE OF soli WITH HEADER LINE.
DATA: pdf_format LIKE STANDARD TABLE OF tline WITH HEADER LINE.
TYPES: BEGIN OF y_files,
file(60) TYPE c,
END OF y_files.
DATA: lt_files TYPE STANDARD TABLE OF y_files WITH HEADER LINE.
DATA: l_objcont LIKE soli OCCURS 0 WITH HEADER LINE.
DATA: l_objhead LIKE soli OCCURS 0 WITH HEADER LINE.
STRUCTURES
DATA: folder_id LIKE soodk,
object_id LIKE soodk,
link_folder_id LIKE soodk,
g_document LIKE sood4,
g_header_data LIKE sood2,
g_folmem_data LIKE sofm2,
g_header_data LIKE sood2,
g_receive_data LIKE soos6,
g_ref_document LIKE sood4,
g_new_parent LIKE soodk,
l_folder_id LIKE sofdk,
v_email(50).
DATA: hd_dat LIKE sood1.
VARIABLES
DATA: client LIKE tst01-dclient,
name LIKE tst01-dname,
objtype LIKE rststype-type,
type LIKE rststype-type.
DATA: numbytes TYPE i,
arc_idx LIKE toa_dara,
pdfspoolid LIKE tsp01-rqident,
jobname LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount,
is_otf.
DATA: outbox_flag LIKE sonv-flag VALUE 'X',
store_flag LIKE sonv-flag,
delete_flag LIKE sonv-flag,
owner LIKE soud-usrnam,
on LIKE sonv-flag VALUE 'X',
sent_to_all LIKE sonv-flag,
g_authority LIKE sofa-usracc,
w_objdes LIKE sood4-objdes.
DATA: c_file LIKE rlgrap-filename,
n_spool(6) TYPE n.
DATA: cancel.
DATA: desired_type LIKE sood-objtp,
real_type LIKE sood-objtp,
attach_type LIKE sood-objtp,
otf LIKE sood-objtp VALUE 'OTF', " SAPscript Ausgabeformat
ali LIKE sood-objtp VALUE 'ALI'. " ABAP lists
CONSTANTS
CONSTANTS: ou_fol LIKE sofh-folrg VALUE 'O',
c_objtp LIKE g_document-objtp VALUE 'RAW',
c_file_ext LIKE g_document-file_ext VALUE 'TXT'.
*=======================================================================
*=
*=========
*z_send_email_fax2
*function z_faian_mail_fax2.
""Interface local:
*" IMPORTING
*" REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*" REFERENCE(FAX_MAIL_NUMBER) TYPE SO_NAME
*" REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*" REFERENCE(OBJECT_TYPE) TYPE SO_ESCAPE
*" TABLES
*" LT_BODY_EMAIL STRUCTURE SOLI
*" EXCEPTIONS
*" ERR_NO_ABAP_SPOOLJOB
Fist part: Verify if the spool really exists
*select single * from tsp01 where rqident = src_spoolid.
DATA src_spoolid TYPE tsp01-rqident VALUE '23242'.
DATA header_mail TYPE so_obj_des.
DATA lt_body_email TYPE STANDARD TABLE OF soli WITH HEADER LINE.
DATA l_t VALUE '1'.
header_mail = 'Subject line of mail'.
IF l_t = '1' .
RAISE err_no_abap_spooljob. "doesn't exist
*ELSE.
client = '200'."tsp01-rqclient.
name = 'SPOOL0000023242'."tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = 'OTF'.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
EXPORTING
method = 'SAVE'
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
objcont = lt_body_email
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
CLEAR lt_rec_tab.
lt_rec_tab-sel = 'X'.
lt_rec_tab-recesc = object_type. "This field for FAX/MAIL
lt_rec_tab-recnam = 'U-'.
lt_rec_tab-deliver = 'X'.
lt_rec_tab-not_deli = 'X'.
lt_rec_tab-read = 'X'.
lt_rec_tab-mailstatus = 'E'.
lt_rec_tab-adr_name = fax_mail_number.
lt_rec_tab-sortfield = fax_mail_number.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-sortclass = '5'.
APPEND lt_rec_tab.
lt_rec_tab-recextnam = ."Email id .
lt_rec_tab-recesc = 'U'. "object_type.
lt_rec_tab-sndart = 'INT'.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
c_file = 'C:\Documents and Settings\abgupta\Desktop\Abhinav\zpk.txt'.
lt_files-file = c_file.
APPEND lt_files.
begin of insertion by faianf01
hd_dat-objdes = header_mail.
CALL FUNCTION 'SO_ATTACHMENT_INSERT'
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
end of insertion by faianf01
lt_note_text-line = 'test prgram for email'.
APPEND lt_note_text.
send email from SAPOFFICE
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
check_send_authority = 'X'
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDIF.
COMMIT WORK AND WAIT.Hi!
Add the actual body right after the line, you have created the Multipart object.
// create and fill the first message part
MimeBodyPart mbp1 = new MimeBodyPart();
mbp1.setText(this.text); //body of message
Multipart mp = new MimeMultipart();
// Adding the body
mp.addBodyPart(mbp1);
//adding attachments
//... and so on...-Raine-
Maybe you are looking for
-
Help? Verizon has no idea what's wrong..
I'm trying to get some of these issues resolved before my 1st month is up.. Verizon doesn't have any idea what's going on. In 2 weeks, I've gone through 2 STBs and today a tech replaced the box (ONT?) inside the garage. I won't go over the larger
-
Damaged the outside shale of my ipad how do I fix it?
Someone please help
-
I'm getting an error upon itunes launch 'detected a problem with your audio configuration and audio playback will not work' and it isn't. Upgraded itunes and problem persists. Any other hints?
-
Hi, I have a very large library of songs in Itunes. I also have thousands of duplicates and removing all the duplicates manually would not be possible. Itunes has a built in duplicate finder but it doesn't allow me to remove all the duplicates automa
-
How to get an iTunes Match without using a credit card
I'm from Mexico and I'm seventeen. How can I join the iTunes Match without using a credit card? I've bought an iTunes Card but I'm not sure if I'm able to buy the subscription for a year with it. I CAN'T FIND THE COMMUNITY SUPPORT IN ESPANISH :@! Luc