Local host error doodle jump

I just downloaded the free version of doodle jump, and I wanted to get the upgrade on my IPod Touch. But there is a local host error problem. How do I fix this?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- Try when connect to another network

Similar Messages

Error on invoking a webservice by giving ip address instead of local host

Hi,
I created a web service through jdeveloper and tried accessing the webservice generated WSDl file by giving ip address of my machine , but it throws me an error stating IE cannot display the web page . The same web service is running fine when giving local host on the Web service URL .
Looking frwd fr sme help
Thanks in advance
Ragaven

Hi,
your WebLogic server is not setup to listen for the IP address. You can change this in the WLS console for the server configuration. Note that when you install WLS and don't define any hostname then it will listen to all addresses (which also is the default for the integrated WLS)
Frank

Event ID 1012 - There was an error while attempting to read the local hosts file

When I start my Computer after it has been turned off overnight (switched off at the Power supply) I get a Blue screen and have to reboot the PC. in the Event log it has this error: Event ID 1012 - DNS client events - There was an error while attempting
to read the local hosts file.
Once the PC has booted evrything is O.K. I can restart the PC with no problems, it only seems to happen if the PC has been switched off for a while.
I am connected to the net via an Netgear dg834v4 Modem/Router
Windows 7 Ultimate
Intel Q8200 CPU
2 x 360 Gb HDD
ATI 4680 !Gb Video Card
Digital HDA X-Mystique 7.1 Sound Card
Aver media 777 TV Tuner card.
Thank you
jeepers01
After further Investigation it seems that this error is Not responsible for my Blue screening......I started my PC after leaving it off all night, and it started normally, but i still have this error in the Event Log - System.....I have searched the Technet
forums (and there is a lot of ID 1012 errors) but non relating to my problem....If anyone knows what is causing this error and how to fix it, i'd be Grateful....although it does not seem to affect the PC in any way that i can see.
thanks
jeepers01

Since Windows system uses separated user mode and kernel mode memory space, stop errors are always caused by kernel portion components, such as a third-party device drivers, backup software or anti-virus services (buggy services).
The system goes to a BSOD because there is some exceptions happened in the kernel (either the device driver errors or the service errors), and Windows implements this mechanism: When it detects some errors occur in the kernel, it will kill the box in case
some more severe damage happens. Then we get a blue screen or the system reboots (it depends on what the system settings are).
To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that
a dedicated Support Professional can assist with your request. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
Microsoft - Help and Support
If you are outside the US please see
Microsoft Worldwide Home for regional support phone numbers.
Meantime we can try some available steps as a general troubleshoot.
1. Please remove the antivirus and run the system with a period. If the issue does not occur, mainly focus on antivirus settings and compatibility.
2. Disable Automatic Restart and see detail information on the blue screen.
1).Click Start, in the Start Search box enter sysdm.cpl.
2).Click the tab Advanced. Under Startup and Recovery, click the Settings button.
3). Uncheck “Automatically restart”.
4). On the drop-down menu “Write debugging information”, choose “Small memory dump”.
5). Click OK.
When Blue Screen displays, you may find some useful information.
Arthur Xie - MSFT

Local host give errors 403

I have a local host set up using XAMPP. Until recently this worked fine. Now, when I try to access files using http://local host, I get error 403 Forbidden.
== URL of affected sites ==
http://

iam using xp professional
and firefox 3.6.
i have instled iis
iam gettin problem in getting localhost
iamgetting error
"firefo cannot estblish a connection to the localhost "

How to run local host web application in win 7 64 bit with oracle database?

Hi all,
Hope doing well,
sir i am running my local host web application with oracle database in win 7 32 bit. it's working fine.
but when i am running the same thing in win 7 64 bit. it's showing login error.
not going to home page even i checked with this published file open in visual studio it's working fine.
how to run it correctly?
thanks in advance.

The number of times you have been asked to post sufficient details for your questions, we would expect you to have got the message by now... but clearly not.
952646 wrote:
but when i am running the same thing in win 7 64 bit. it's showing login error.What error? You haven't posted an error. There are millions of possible errors in computing and you're expecting people to guess which one.
not going to home page even i checked with this published file open in visual studio it's working fine.
how to run it correctly?No code, no database version, no details...... = NO HELP.
When are you going to learn.

Save a csv file on local host, executing a DTP Open hub in a Process chain?

Hi All,
my client has asked me to try if there is a way to save in the local host c:\ a .CSV file generated from an Open HUB executed by a DTP in a Process chain.
when i execute my DTP it work correctly and it save the .csv file on my c:\ directory.
my client doesn't want to give th users authtorization on RSA1 and want to try if there is a way to put the DTP in a process chain
and when executing the process chain every user can have the file on his own local c:\ directory.
i tried this solution but it doesn't work i get an error on executin the process chain:
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Except.                     CX_SY_REF_IS_INITIAL
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "FILE_DELETE" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "CL_GUI_FRONTEND_SERVICES=>HANDLE").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
can you give some advices please?
Thanks for All
Bilal

Hi Bilal,
Unfortunately, DTPs belonging to Open Hubs wich are targeted to a local workstation file, can't be executed through a process chain.
The only way of including such DTP in a process chain is changing the Open Hub so that it writes the output file in the application server. Then, you can retrieve the file -through FTP or any other means- from the application server to the local workstation.
Hope this helps.
King regards,
Maximiliano

Setting up local host

I am trying to set up a local host for testing PHP per David Powers book. I am doing something wrong because I keep getting a 404 error. I am probably screwing up the locations of my site folders and/or the url address. Can someone help me out?

The more information you provide the more likely you are to receive a response that will assist you. To avoid volunteer contributors from asking you 20 questions about the steps you've taken so far why not list in detail the steps you've taken to get to the point you're at now? Expect the amount of effort you put into your post to be reciprocated by others who respond. A three sentence post that vaguely describes your symptoms and methods will most likely be replied with the same minimal effort.

RemoteException LOCALHOST is non-local host

Hello RMI gurus,
I am trying to run an example RMI application to get a better understanding of how RMI works, but I have encountered this problem. The error I am getting is this:
Error: RemoteException occured in server thread; nested exception is:
java.rmi.AccessException: Registry.Registry.rebind disallowed;
origin
LOCALHOST/127.0.0.1 is non-local host
I have the rmiregistry running on the default port on the same system that I am trying to run the server part of the program, and am using Java 1.3. Here is how I start the program:
java -Djava.rmi.server.codebase=file:///java/verify/ -cp /java/verify FibonacciServerAlso, I bind my object to rmi with this call in the FibonacciServer class:
Naming.bind("fibonacci", f);
I am guessing it is choking on this.
Any way...thanks in advance for any help with this!
C.M.

Naming.bind("fibonacci", f);
Naming.bind("//localhost/fibonacci",f);You can add rmi: in front of localhost but it is not essential.

Failed to get IP address for Local Host (2) , OPMNCTL: opmn start failed

HI,
Hi, I have installed on Oracle 10g on Redhat Enterprise Linux V.2.1 . I was able to start OEM without any issues. Recently I had changed the static IP address and I couldn't able to start OPMNCTL and getting the following error while starting opmnctl start. error message is as follows.
Failed to get IP address for local host(2).....
Failed to get IP address for local host(2).....
Failed to get IP address for local host(2).....
my current configuration in /etc/hosts file is as follows.
127.0.0.1 localhost.localdomain servername
After going through some of threads available in Oracle, I have added the static IP address in the /etc/hosts but still I am getting the same error.
my new hosts file is as follows.
127.0.0.1 localhost.localdomain servername
10.21.253.102 localhost.localdomain servername
I don't know why this is looking for localhost (2). I did not set up any local host (2) and I could not see anything in my network confiuration also.
could you please help me in this issue? I appreciate your help in this regard.
Thanks
venkat

Hi, i think that the application server part is looking for a /etc/hosts entry
in this format:
127.0.0.1 localhost
As i noticed, this is used for internal communication.
Try this entry as is, without a domain...

Local host

I am having a tough time getting the local host to work.
I am using dw 8.0
firefox 2.0 is my primary
IE 7.0 is secondary.
everytime I attempt it I get a connect error.
it has
http://localhost/sitename.com/TMP8vew5uykvv.php
the .php name is not correct. it is a different folder name.
I am not sure I have it set up correctly under manage sites.

When you elect to preview using temp files, several things
happen BEFORE DW
hands the file to the browser. DW builds a temporary file in
which -
1. The content of all include files or externally linked
files in included
in the markup.
2. All root relative links are changed to absolute file links
so that they
will work in the page being previewed, for example, this -
<img src="/images/whatever.jpg"...
would be changed to this -
<img src=''file:///c:/.../images/whatever.jpg''...
(where the "..." represents the absolute path to that images
folder on YOUR
hard drive)
3. The filename for the temp file is a temporary filename
That is the file that is given to the browser to preview.
Your problem has nothing to do with those transitions.
What happens when you browse to
http://localhost?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"IowaHusker" <[email protected]> wrote in
message
news:fn25g3$7ep$[email protected]..
> I"ll search some more. I tried earlier with no luck.
>
> thanks
>

RW-20004 no installs found for this host Error when installing Apps tier

Hello:
Trying to install 12.1.1 on a linux x64 OS. Following is my current OS Setup:
1) Have 2 Instances or RHEL 5 Update 4 x64 each named as follows: oalin12db.apps.local & oalin12mt.apps.local
2) Both have multi user setups as follows:
a) user: oracle (501), group dba (503)
b) user: applmgr (502), group dba (503)
3) Installation of DB node successful for a Vision Instance with SID=VISN
4) Getting error "RW-20004 no installs found for this host" on apps tier. Does not matter if I use host:SID:port or copy the actual config file over and point rapidwiz to it, I get the same error.
5) checked everything as per metalink notes 605677.1 and 444870.1.
6) SELinux on Permissive mode on both instances for now.
7) Installation stage directory is local to the DB instance and is setup as an nfs mount onto the apps tier.
Here's how my config_VISN.txt file looks.
<?xml version="1.0"?>
<oa_context version="$Revision: 120.5 $">
<oa_context_name oa_var="s_contextname">config.txt</oa_context_name>
<oa_context_serial oa_var="s_contextserial">0</oa_context_serial>
<oa_context_type oa_var="s_contexttype">Config File</oa_context_type>
<oa_context_file_loc oa_var="s_contextfile">/u01/oracle/VISN/db/tech_st/11.1.0/appsutil/conf_VISN.txt</oa_context_file_loc>
<ini_file>
[GENERAL]
CONFIGURED_ENVS=VISN
CONFIGURATION_FORMAT=12.0.0
ACTION_TYPE=INSTALLING
NUMBER_OF_HOSTS=2
HOSTNAMES={Server0_oalin12db,Server1_oalin12mt}
[Server0_oalin12db]
s_contextname=VISN_oalin12db
s_dbSid=VISN
s_dbport=1526
s_platform=LINUX_X86-64
s_base_lang=US
s_env_langs={American_English - US}
s_allprod={FND}
s_defterr=AMERICA
s_domainname=apps.local
s_isDB=YES
s_isAdmin=NO
s_isForms=NO
s_isConc=NO
s_isWeb=NO
s_port_pool=5
s_dbSidLower=visn
s_dbuser=oracle
s_apps_version=12.1.1
s_dbGlnam=VISN
s_dbseed=Vision Demo
s_dbtype=VISION
s_dbgroup=dba
s_dbcset=AL32UTF8
s_base=/u01/oracle/VISN
s_db_oh=/u01/oracle/VISN/db/tech_st/11.1.0
s_dbhome1=/u01/oracle/VISN/db/apps_st/data
s_dbhome2=/u01/oracle/VISN/db/apps_st/data
s_dbhome3=/u01/oracle/VISN/db/apps_st/data
s_dbhome4=/u01/oracle/VISN/db/apps_st/data
s_dbhost=oalin12db
s_bits=32
s_db_ons_localport=6300
s_db_ons_remoteport=6400
s_cmanport=1521
[Server1_oalin12mt]
s_contextname=VISN_oalin12mt
s_dbSid=VISN
s_dbport=1526
s_platform=LINUX_X86-64
s_base_lang=US
s_env_langs={American_English - US}
s_allprod={FND}
s_defterr=AMERICA
s_domainname=apps.local
s_dbdomain=apps.local
s_isDB=NO
s_isAdmin=YES
s_isForms=YES
s_isConc=YES
s_isWeb=YES
s_port_pool=5
s_formsfndtop=/u01/oracle/VISN/apps/apps_st/appl/fnd/12.0.0
s_dbSidLower=visn
s_dbuser=oracle
s_apps_version=12.1.1
s_base=/u01/oracle/VISN
s_inst_base=/u01/oracle/VISN/inst
s_config_home=/u01/oracle/VISN/inst/apps/VISN_oalin12mt
s_at=/u01/oracle/VISN/apps/apps_st/appl
s_at2=/u01/oracle/VISN/apps/apps_st/appl
s_at3=/u01/oracle/VISN/apps/apps_st/appl
s_at4=/u01/oracle/VISN/apps/apps_st/appl
s_tools_oh=/u01/oracle/VISN/apps/tech_st/10.1.2
s_weboh_oh=/u01/oracle/VISN/apps/tech_st/10.1.3
s_com=/u01/oracle/VISN/apps/apps_st/comn
s_javatop=/u01/oracle/VISN/apps/apps_st/comn/java/classes
s_temp=/u01/oracle/VISN/inst/apps/VISN_oalin12mt/temp
s_appsuser=applmgr
s_appsgroup=dba
s_at_cset=AL32UTF8
s_iana_cset=UTF-8
s_display=oalin12mt:0.0
s_dbhost=oalin12db
s_admhost=oalin12mt
s_formshost=oalin12mt
s_cphost=oalin12mt
s_webhost=oalin12mt
s_installedFrom=FS
s_root_status=enabled
s_web_entry_status=enabled
s_web_applications_status=enabled
s_batch_status=enabled
s_other_service_group_status=disabled
s_rpcport=1626
s_webssl_port=4443
s_ons_localport=6100
s_ons_remoteport=6200
s_ons_requestport=6500
s_webport=8000
s_active_webport=8000
s_formsport=9000
s_metdataport=9100
s_metreqport=9200
s_jtfuf_port=9300
s_mwaPortNo=10200-10205
s_mwaTelnetPortNo=10200,10202,10204
s_mwaDispatcherPort=10800
s_java_object_cache_port=12345
s_oacore_jms_portrange=23000-23004
s_forms_jms_portrange=23500-23504
s_home_jms_portrange=24000-24004
s_oafm_jms_portrange=24500-24504
s_oacore_ajp_portrange=21500-21504
s_forms_ajp_portrange=22000-22004
s_home_ajp_portrange=22500-22504
s_oafm_ajp_portrange=25000-25004
s_oacore_rmi_portrange=20000-20004
s_forms_rmi_portrange=20500-20504
s_home_rmi_portrange=21000-21004
s_oafm_rmi_portrange=25500-25504
</ini_file>
<config_section name="GENERAL">
<config_pair oa_var="CONFIGURED_ENVS">VISN</config_pair>
<config_pair oa_var="CONFIGURATION_FORMAT">12.0.0</config_pair>
<config_pair oa_var="ACTION_TYPE">INSTALLING</config_pair>
<config_pair oa_var="NUMBER_OF_HOSTS">2</config_pair>
<config_pair oa_var="HOSTNAMES">{Server0_oalin12db,Server1_oalin12mt}</config_pair>
</config_section>
<config_section name="Server0_oalin12db">
<config_pair oa_var="s_contextname">VISN_oalin12db</config_pair>
<config_pair oa_var="s_dbSid">VISN</config_pair>
<config_pair oa_var="s_dbport">1526</config_pair>
<config_pair oa_var="s_platform">LINUX_X86-64</config_pair>
<config_pair oa_var="s_base_lang">US</config_pair>
<config_pair oa_var="s_env_langs">{American_English - US}</config_pair>
<config_pair oa_var="s_allprod">{FND}</config_pair>
<config_pair oa_var="s_defterr">AMERICA</config_pair>
<config_pair oa_var="s_domainname">apps.local</config_pair>
<config_pair oa_var="s_isDB">YES</config_pair>
<config_pair oa_var="s_isAdmin">NO</config_pair>
<config_pair oa_var="s_isForms">NO</config_pair>
<config_pair oa_var="s_isConc">NO</config_pair>
<config_pair oa_var="s_isWeb">NO</config_pair>
<config_pair oa_var="s_port_pool">5</config_pair>
<config_pair oa_var="s_dbSidLower">visn</config_pair>
<config_pair oa_var="s_dbuser">oracle</config_pair>
<config_pair oa_var="s_apps_version">12.1.1</config_pair>
<config_pair oa_var="s_dbGlnam">VISN</config_pair>
<config_pair oa_var="s_dbseed">Vision Demo</config_pair>
<config_pair oa_var="s_dbtype">VISION</config_pair>
<config_pair oa_var="s_dbgroup">dba</config_pair>
<config_pair oa_var="s_dbcset">AL32UTF8</config_pair>
<config_pair oa_var="s_base">/u01/oracle/VISN</config_pair>
<config_pair oa_var="s_db_oh">/u01/oracle/VISN/db/tech_st/11.1.0</config_pair>
<config_pair oa_var="s_dbhome1">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhome2">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhome3">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhome4">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhost">oalin12db</config_pair>
<config_pair oa_var="s_bits">32</config_pair>
<config_pair oa_var="s_db_ons_localport">6300</config_pair>
<config_pair oa_var="s_db_ons_remoteport">6400</config_pair>
<config_pair oa_var="s_cmanport">1521</config_pair>
</config_section>
<config_section name="Server1_oalin12mt">
<config_pair oa_var="s_contextname">VISN_oalin12mt</config_pair>
<config_pair oa_var="s_dbSid">VISN</config_pair>
<config_pair oa_var="s_dbport">1526</config_pair>
<config_pair oa_var="s_platform">LINUX_X86-64</config_pair>
<config_pair oa_var="s_base_lang">US</config_pair>
<config_pair oa_var="s_env_langs">{American_English - US}</config_pair>
<config_pair oa_var="s_allprod">{FND}</config_pair>
<config_pair oa_var="s_defterr">AMERICA</config_pair>
<config_pair oa_var="s_domainname">apps.local</config_pair>
<config_pair oa_var="s_dbdomain">apps.local</config_pair>
<config_pair oa_var="s_isDB">NO</config_pair>
<config_pair oa_var="s_isAdmin">YES</config_pair>
<config_pair oa_var="s_isForms">YES</config_pair>
<config_pair oa_var="s_isConc">YES</config_pair>
<config_pair oa_var="s_isWeb">YES</config_pair>
<config_pair oa_var="s_port_pool">5</config_pair>
<config_pair oa_var="s_formsfndtop">/u01/oracle/VISN/apps/apps_st/appl/fnd/12.0.0</config_pair>
<config_pair oa_var="s_dbSidLower">visn</config_pair>
<config_pair oa_var="s_dbuser">oracle</config_pair>
<config_pair oa_var="s_apps_version">12.1.1</config_pair>
<config_pair oa_var="s_base">/u01/oracle/VISN</config_pair>
<config_pair oa_var="s_inst_base">/u01/oracle/VISN/inst</config_pair>
<config_pair oa_var="s_config_home">/u01/oracle/VISN/inst/apps/VISN_oalin12mt</config_pair>
<config_pair oa_var="s_at">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_at2">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_at3">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_at4">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_tools_oh">/u01/oracle/VISN/apps/tech_st/10.1.2</config_pair>
<config_pair oa_var="s_weboh_oh">/u01/oracle/VISN/apps/tech_st/10.1.3</config_pair>
<config_pair oa_var="s_com">/u01/oracle/VISN/apps/apps_st/comn</config_pair>
<config_pair oa_var="s_javatop">/u01/oracle/VISN/apps/apps_st/comn/java/classes</config_pair>
<config_pair oa_var="s_temp">/u01/oracle/VISN/inst/apps/VISN_oalin12mt/temp</config_pair>
<config_pair oa_var="s_appsuser">applmgr</config_pair>
<config_pair oa_var="s_appsgroup">dba</config_pair>
<config_pair oa_var="s_at_cset">AL32UTF8</config_pair>
<config_pair oa_var="s_iana_cset">UTF-8</config_pair>
<config_pair oa_var="s_display">oalin12mt:0.0</config_pair>
<config_pair oa_var="s_dbhost">oalin12db</config_pair>
<config_pair oa_var="s_admhost">oalin12mt</config_pair>
<config_pair oa_var="s_formshost">oalin12mt</config_pair>
<config_pair oa_var="s_cphost">oalin12mt</config_pair>
<config_pair oa_var="s_webhost">oalin12mt</config_pair>
<config_pair oa_var="s_installedFrom">FS</config_pair>
<config_pair oa_var="s_root_status">enabled</config_pair>
<config_pair oa_var="s_web_entry_status">enabled</config_pair>
<config_pair oa_var="s_web_applications_status">enabled</config_pair>
<config_pair oa_var="s_batch_status">enabled</config_pair>
<config_pair oa_var="s_other_service_group_status">disabled</config_pair>
<config_pair oa_var="s_rpcport">1626</config_pair>
<config_pair oa_var="s_webssl_port">4443</config_pair>
<config_pair oa_var="s_ons_localport">6100</config_pair>
<config_pair oa_var="s_ons_remoteport">6200</config_pair>
<config_pair oa_var="s_ons_requestport">6500</config_pair>
<config_pair oa_var="s_webport">8000</config_pair>
<config_pair oa_var="s_active_webport">8000</config_pair>
<config_pair oa_var="s_formsport">9000</config_pair>
<config_pair oa_var="s_metdataport">9100</config_pair>
<config_pair oa_var="s_metreqport">9200</config_pair>
<config_pair oa_var="s_jtfuf_port">9300</config_pair>
<config_pair oa_var="s_mwaPortNo">10200-10205</config_pair>
<config_pair oa_var="s_mwaTelnetPortNo">10200,10202,10204</config_pair>
<config_pair oa_var="s_mwaDispatcherPort">10800</config_pair>
<config_pair oa_var="s_java_object_cache_port">12345</config_pair>
<config_pair oa_var="s_oacore_jms_portrange">23000-23004</config_pair>
<config_pair oa_var="s_forms_jms_portrange">23500-23504</config_pair>
<config_pair oa_var="s_home_jms_portrange">24000-24004</config_pair>
<config_pair oa_var="s_oafm_jms_portrange">24500-24504</config_pair>
<config_pair oa_var="s_oacore_ajp_portrange">21500-21504</config_pair>
<config_pair oa_var="s_forms_ajp_portrange">22000-22004</config_pair>
<config_pair oa_var="s_home_ajp_portrange">22500-22504</config_pair>
<config_pair oa_var="s_oafm_ajp_portrange">25000-25004</config_pair>
<config_pair oa_var="s_oacore_rmi_portrange">20000-20004</config_pair>
<config_pair oa_var="s_forms_rmi_portrange">20500-20504</config_pair>
<config_pair oa_var="s_home_rmi_portrange">21000-21004</config_pair>
<config_pair oa_var="s_oafm_rmi_portrange">25500-25504</config_pair>
</config_section>
</oa_context>

Here's the log:
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 12.1.1.9
>> Install session started : Thu Nov 05 11:10:16 EST 2009
>> Rapid Wizard source location : /u02/apps/StageR12/startCD/Disk1/rapidwiz
>> Command Line arguments for this run :
=================================================================
Install Session Information
Host Name : oalin12mt.apps.local
Host Operating System : Linux x86-64 (64-bit)
User running Install : root
=================================================================
InstUpgPanel
     User action : Install Oracle Applications
     Install type : Standard Install
Disabling OCM Configuration
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@16b9e62
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@1694eca
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@170984c
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@1c220eb
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@b41166
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@103d246
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@19c9f16
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@1e7d503
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@287b58
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@95c5ec
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@1f89785
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@109dcbb
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml

[iPhone 2.1 beta2] gethostbyname always get Unknown host error

gethostbyname always get "Unknown host" error.
any thoughts?
following is the code how to get local iphone ip:
char buffer[256];
if(gethostname(buffer, sizeof(buffer)) == 0)
struct hostent* host = gethostbyname(buffer);
if (host == NULL) {
herror("gethostbyname");
return NULL;
in_addr in;
memcpy(&in.s_addr, host->h_addr, host->h_length);
char* addr = inet_ntoa(in);
if(addr)
strcpy(local_ip, addr);
}

I'm having a similar problem, but the emergency call/airplane mode trick didn't fix mine. I just get call failed with no option to turn off airplane mode. Anyone else have another solution?
I'm on an original iPhone with a Mac PowerBook G4
After trying the update to 2.1 I just get the "unknown error occurred (-3256)" in iTunes. And the connect to iTunes screen on my iPhone. I've tried resetting with no success. I cannot restore because it can't access the iPhone in iTunes (it shows up as a devise by that's it). I can't get to any settings.
Any help will be greatly appreciated...I'm desperate.

Cannot Connect to local host

from the xserv where i am setting up a website i cannot access local host which is preventing me from setting up phpmyadmin config file. I open safari and type in http://localhost/ and i get the error message cannot connect to local host. I can access the server using the ip (no domain setup yet). I am a novice at setting up web serves in the mac/apache environment so i may have missed a simple step somewhere. Any help would be appreciated.

Hi, and a warm welcome to the forums!
No expert here, but have you tried http://127.0.0.1 ?
Might get better help in the xserve, or Server forums here.

DNS or Local Host Name Issue

I have an iMac, 10.6.2 that continues to get a duplicate IP address error. I have determined that this iMac is seeing itself as another machine on the network, hence the duplicate IP error. I have changed the local host name under system preferences -->network (and in sharing) to imac10.6.2-username However, on the WINS tab of system preferences-->network the computer name shows as imac 9B14C4. I have manually changed this on the WINS tab and but it doesn't actually change it. I have flushed DNS and used the scutil--gethostname command to no avail. Additionally, this iMac does not show up when browsing the network from any machine on the network. All other Macs here do. Any suggestions?
Message was edited by: EricWeiner
Actually I can browse to it through the network by either the DNS name or the WINS name, even though I tried to make them the same.

I use a Mac mini as a small AV server, and have exactly the same issue. Message keeps popping up at least once a day. Changing name in Preferences doesn't make any difference. After a few weeks it's gone from 'Centerstage' to 'Centerstage-8'. I even formatted the HD and installed Leopard and after that Snow Leopard. Didn't solve anything. Very irritating. Apple only recognizes this as a Mac OS X server issue.
Help.

Wordpress on local host?

I have a simple (only 2 posts and no pages) test WP blog installed on a remote web host. I'm trying to work on a copy of it off-line on my localhost. I started by adding a new wordpress to my local host, then copied the wp-include folder from remote host to the new localhost wordpress. Export/Import databse. Start and install WP and follow steps to create config.php file.
All works as should. Blog appears on localhost with the 2 posts and the theme appearance and etc just as it does on remote host.
Problem - When, in the WP dashboard Posts section, I click on "view" post I get page not found error 404. I have been advised that I need to go to Settings>Permalinks and then click save. As soon as I select Settings>Permalinks a .htaccess file is added to the WP on localhost, the dashboard display becomes not correct and if I click save I get server error 500 message. From that point on I cannot access the blog on localhost at all. If I delete the .htaccess file I get back to where everything works except as described at the top of this post.
So I believe I need to configure the .htaccess file and/or possibly some other configuration settings I need to change. I just can't figure out what I need to do to get this working correctly. A link to the .htaccess files is below. One file from original remote host the other created by WP when I go to Settings>Permalinks
http://www.openrangeimaging.com/Test/htacess.jpg
someone suggested to me that I just work on my localhost without the .htaccess file but that doesn't seem right to me and I want to get this sorted out and working 100% correctly.
I know this is not realy a DW question. I have posted on the WP forum but not received any replies. I have gotten al lot of gret help and advice here so I am posting this in hopes someone can help me with this. Any advice on how I might get this resolved will be very much appreciated

Disable permalinks when working locally.
Nancy O.

Local host error doodle jump

Similar Messages

Maybe you are looking for