Local Host Issue

On my mac I have showing under Network Servers a series of numbers ie: 107.0.77.10.in-arpa. But when I start up airport and then shut it down, or shutdown the mac completely and restart it, the series of numbers disappears and the computer name reappears. The computer name is what is to be there but sometimes I get a series of numbers.. Anyone know why. ?

Hi MAH,
Do you have any specialized network settings?
Do you run a firewall? If you do, do you have any specialized settings for it (like allowing traffic on non-standard ports)?
Macs running 9.x, Macs running 10.4.x, SGI workstations running Irix 6.5.x

Similar Messages

How do I resolve local host issue?

I have PyDev in Eclipse on my Mac running OSX Mountain Lion. (10.8.2)
Every time an autocomplete tries to occur it just freezes and I receive an error message displaying "Error connecting to Python Process"
I have done some research and I think it may have to do with my localhosts? I dont exactly know what that means so any detailed help would be much appreciated.

try
InetAddress.getLocalHost().getHostName();

DNS or Local Host Name Issue

I have an iMac, 10.6.2 that continues to get a duplicate IP address error. I have determined that this iMac is seeing itself as another machine on the network, hence the duplicate IP error. I have changed the local host name under system preferences -->network (and in sharing) to imac10.6.2-username However, on the WINS tab of system preferences-->network the computer name shows as imac 9B14C4. I have manually changed this on the WINS tab and but it doesn't actually change it. I have flushed DNS and used the scutil--gethostname command to no avail. Additionally, this iMac does not show up when browsing the network from any machine on the network. All other Macs here do. Any suggestions?
Message was edited by: EricWeiner
Actually I can browse to it through the network by either the DNS name or the WINS name, even though I tried to make them the same.

I use a Mac mini as a small AV server, and have exactly the same issue. Message keeps popping up at least once a day. Changing name in Preferences doesn't make any difference. After a few weeks it's gone from 'Centerstage' to 'Centerstage-8'. I even formatted the HD and installed Leopard and after that Snow Leopard. Didn't solve anything. Very irritating. Apple only recognizes this as a Mac OS X server issue.
Help.

Cisco ASA 5505 Cannot ping local traffic and local hosts cannot get out

I have, what I believe to be, a simple issue - I must be missing something.
Site to Site VPN with Cisco ASA's. VPN is up, and remote hosts can ping the inside int of ASA (10.51.253.209).
There is a PC (10.51.253.210) plugged into e0/1.
I know the PC is configured correctly with Windows firewall tuned off.
The PC cannot get to the ouside world, and the ASA cannot ping 10.51.253.210.
I have seen this before, and I deleted VLAN 1, recreated it, and I could ping the local host without issue.
Basically, the VPN is up and running but PC 10.51.253.210 cannot get out.
Any ideas? Sanitized Config is below. Thanks !
ASA Version 7.2(4)
hostname *****
domain-name *****
enable password N7FecZuSHJlVZC2P encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif Inside
security-level 100
ip address 10.51.253.209 255.255.255.248
interface Vlan2
nameif Outside
security-level 0
ip address ***** 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
shutdown
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
ftp mode passive
dns server-group DefaultDNS
domain-name *****
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
pager lines 24
mtu Outside 1500
mtu Inside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any Outside
no asdm history enable
arp timeout 14400
global (Outside) 1 interface
nat (Inside) 0 access-list No_NAT
route Outside 0.0.0.0 0.0.0.0 ***** 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication enable console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
http server enable
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set DPS_Set esp-3des esp-md5-hmac
crypto map DPS_Map 10 match address Outside_VPN
crypto map DPS_Map 10 set peer *****
crypto map DPS_Map 10 set transform-set *****
crypto map DPS_Map interface Outside
crypto isakmp enable Outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 28800
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 Outside
ssh timeout 60
console timeout 0
management-access Inside
username test password P4ttSyrm33SV8TYp encrypted
tunnel-group ***** type ipsec-l2l
tunnel-group ***** ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
Cryptochecksum:8d0adca63eab6c6c738cc4ab432f609d
: end
1500

Hi Martin,
Which way you are trying. Sending traffic via site to site is not working or traffic which you generate to outside world is not working?
But you say ASA connected interface to PC itself is not pinging that is strange. But try setting up the specific rules for the outgoing connection and check. Instead of not having any ACL.
If it is outside world the you may need to check on the NAT rules which is not correct.
If it is site to site then you may need to check few other things.
Please do rate for the helpful posts.
By
Karthik

Event ID 1012 - There was an error while attempting to read the local hosts file

When I start my Computer after it has been turned off overnight (switched off at the Power supply) I get a Blue screen and have to reboot the PC. in the Event log it has this error: Event ID 1012 - DNS client events - There was an error while attempting
to read the local hosts file.
Once the PC has booted evrything is O.K. I can restart the PC with no problems, it only seems to happen if the PC has been switched off for a while.
I am connected to the net via an Netgear dg834v4 Modem/Router
Windows 7 Ultimate
Intel Q8200 CPU
2 x 360 Gb HDD
ATI 4680 !Gb Video Card
Digital HDA X-Mystique 7.1 Sound Card
Aver media 777 TV Tuner card.
Thank you
jeepers01
After further Investigation it seems that this error is Not responsible for my Blue screening......I started my PC after leaving it off all night, and it started normally, but i still have this error in the Event Log - System.....I have searched the Technet
forums (and there is a lot of ID 1012 errors) but non relating to my problem....If anyone knows what is causing this error and how to fix it, i'd be Grateful....although it does not seem to affect the PC in any way that i can see.
thanks
jeepers01

Since Windows system uses separated user mode and kernel mode memory space, stop errors are always caused by kernel portion components, such as a third-party device drivers, backup software or anti-virus services (buggy services).
The system goes to a BSOD because there is some exceptions happened in the kernel (either the device driver errors or the service errors), and Windows implements this mechanism: When it detects some errors occur in the kernel, it will kill the box in case
some more severe damage happens. Then we get a blue screen or the system reboots (it depends on what the system settings are).
To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that
a dedicated Support Professional can assist with your request. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
Microsoft - Help and Support
If you are outside the US please see
Microsoft Worldwide Home for regional support phone numbers.
Meantime we can try some available steps as a general troubleshoot.
1. Please remove the antivirus and run the system with a period. If the issue does not occur, mainly focus on antivirus settings and compatibility.
2. Disable Automatic Restart and see detail information on the blue screen.
1).Click Start, in the Start Search box enter sysdm.cpl.
2).Click the tab Advanced. Under Startup and Recovery, click the Settings button.
3). Uncheck “Automatically restart”.
4). On the drop-down menu “Write debugging information”, choose “Small memory dump”.
5). Click OK.
When Blue Screen displays, you may find some useful information.
Arthur Xie - MSFT

Maverick Local Host Not Working Correctly

Hello,
I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
Also
* Web sharing is on
*PHP is enabled
*Mysql is running
Did I mis something?
Thanks JR

Hello,
I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
Also
* Web sharing is on
*PHP is enabled
*Mysql is running
Did I mis something?
Thanks JR

Failed to get IP address for Local Host (2) , OPMNCTL: opmn start failed

HI,
Hi, I have installed on Oracle 10g on Redhat Enterprise Linux V.2.1 . I was able to start OEM without any issues. Recently I had changed the static IP address and I couldn't able to start OPMNCTL and getting the following error while starting opmnctl start. error message is as follows.
Failed to get IP address for local host(2).....
Failed to get IP address for local host(2).....
Failed to get IP address for local host(2).....
my current configuration in /etc/hosts file is as follows.
127.0.0.1 localhost.localdomain servername
After going through some of threads available in Oracle, I have added the static IP address in the /etc/hosts but still I am getting the same error.
my new hosts file is as follows.
127.0.0.1 localhost.localdomain servername
10.21.253.102 localhost.localdomain servername
I don't know why this is looking for localhost (2). I did not set up any local host (2) and I could not see anything in my network confiuration also.
could you please help me in this issue? I appreciate your help in this regard.
Thanks
venkat

Hi, i think that the application server part is looking for a /etc/hosts entry
in this format:
127.0.0.1 localhost
As i noticed, this is used for internal communication.
Try this entry as is, without a domain...

CSS works on local host but not when ftp to server

I am completely stumped. I have a site I built on a development platform in XAMPP. The jQuery lightbox css styling works great. I FTP the files to the server and the css styles are no longer being applied. I hope someone can help me. The link to the stylesheet works. No changes in code. I just can figure it out. Same issue all browsers. Thanks
The url sample page is here:
_css/colorbox.css
http://192.185.137.91/~gothicarch/acrylic-panels.htm
Local Host
Sever

Nevermind. I had mistakenly deleted a directory on the server that was kind of important: Thankfully I had a backup:)

How do I change an IP address of SQL Server which is locally hosted and is not on cluster?

Hi All,
How do I change an IP address of SQL Server which is locally hosted and is not on cluster?
I am asking about IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
aa

Full explanation can seen here:
SQL Server: Configure Listening IP, Port, and Named pipe
http://ariely.info/Blog/tabid/83/EntryId/151/SQL-Server-Configure-Listening-IP-Port-and-Named-pipe.aspx
[Personal Site] [Blog] [Facebook]

Is there a way to run using local host ip (127.0.0.1)?

I am trying to get a working system at home. Obviously I cannot use a dialup
dynamic IP address, but is there a way to enable iAS 6.0 SP3 to use the
local host address of 127.0.0.1?
kas.exe complains 'value of admin host in registry is invalid (localhost IP
is not acceptable)'. I am running Windows 2000 and I do have a network card
that I sporadically use to connect a laptop. It appears that with Windows
2000, I can not use my Ethernet cards PI address unless I actually have it
connected to a network.
Any assistance would be appreciated.
Thanks,
Bret Hansen

Yes. Use the loopback adapter.
Bret Hansen wrote:
I am trying to get a working system at home. Obviously I cannot use a dialup
dynamic IP address, but is there a way to enable iAS 6.0 SP3 to use the
local host address of 127.0.0.1?

How to set up a JSP local host server?

I am trying to set up a local host JSP server, do you know any good youtube or tutorials in general that would help me set up a local host JSP server? Or could you post the steps here and your source (if any).
I am looking for something similar to XAMPP as in this youtube tutorial: http://ca.youtube.com/watch?v=KWRB-maTVyM&feature=rec-fresh However, any help would be greatly appreciated.
By the way, I am very new to JSP and was wondering, XAMPP includes Apache, is Apache a JSP server?
-Direction needed.
Edited by: watwatacrazy on Aug 31, 2008 6:51 AM

You need a Java web container to run JSP/Servlets. A commonly used one is Apache Tomcat. It is not the same as Apache HTTP Server which can only serve static files.
You can find Tomcat here: [http://tomcat.apache.org].
How to install/use it, just check the User Guide: [http://tomcat.apache.org/tomcat-6.0-doc/index.html].

Do I need to have my site uploaded to a remote host for embeded formscentral form to work? I am getting a broken section of header with a warning sign on top corner saying "!Local host." Cheers

Hey there all.
I am wondering if there is something wrong with my embedded form or if it is simply because
I have not uploaded my site to remote host yet? I am only getting a broken part of the header with
no actual form, with a warning "!local host" in top left hand corner. If anyone could enlighten
me on this problem it would be greatly appreciated, it is my first time making forms

Cheers, I noticed some browsers were treating the form differently. I am uploading to a test server tomorrow, hopefully all goes well, thanks for your reply

Error on invoking a webservice by giving ip address instead of local host

Hi,
I created a web service through jdeveloper and tried accessing the webservice generated WSDl file by giving ip address of my machine , but it throws me an error stating IE cannot display the web page . The same web service is running fine when giving local host on the Web service URL .
Looking frwd fr sme help
Thanks in advance
Ragaven

Hi,
your WebLogic server is not setup to listen for the IP address. You can change this in the WLS console for the server configuration. Note that when you install WLS and don't define any hostname then it will listen to all addresses (which also is the default for the integrated WLS)
Frank

How to run local host web application in win 7 64 bit with oracle database?

Hi all,
Hope doing well,
sir i am running my local host web application with oracle database in win 7 32 bit. it's working fine.
but when i am running the same thing in win 7 64 bit. it's showing login error.
not going to home page even i checked with this published file open in visual studio it's working fine.
how to run it correctly?
thanks in advance.

The number of times you have been asked to post sufficient details for your questions, we would expect you to have got the message by now... but clearly not.
952646 wrote:
but when i am running the same thing in win 7 64 bit. it's showing login error.What error? You haven't posted an error. There are millions of possible errors in computing and you're expecting people to guess which one.
not going to home page even i checked with this published file open in visual studio it's working fine.
how to run it correctly?No code, no database version, no details...... = NO HELP.
When are you going to learn.

How do I add a new IP to the local host file?

One of the sites I manage has been migrated to a dedicated server. Before changing the nameservers, I need to proof all the pages. To do so, I need to add the new IP number to my local computer local host file.
How is that done?
OSX 10.9
david

Download TextWrangler, choose Open File by Name from the File menu, provide /private/etc/hosts as the path, and enter them using the same format as the 127.0.0.1 line.
(92337)

Local Host Issue

Similar Messages

Maybe you are looking for