Local laptop seller installed Windows which is not genuine.

Hi! I claimed my hard disk warranty but my local laptop seller installed Windows which is not genuine. Do hard disk warranty also comes with original windows warranty?

No that is on the guy who installed it. I would go back to him. There is no excuse for committing what may be a felony. You can get a legal copy of the Windows 7 or Windows 8 reinstall disk online and use the Key Code on the bottom of the laptop to register it. You can have him come on here and we can link him to a place to download a legal copy and how to install it.

Similar Messages

Purchased MacBook Pro with windows which will not open b/c no license

Purchased MacBook Pro with windows which will not now open b/c no license number.
CD package has license number stripped from Apple. How do I get the license number
for the software I purchased for Windows XT?

This is not a Mac/Apple issue. You need to contact the seller and ask where the Windows XP product key is.

How can I create a new partition to install Windows 7 by not using Bootcamp

How can I create a new partition to install Windows 7 by not using Bootcamp?

If you want to dualboot you have to use boot camp i think. I think you have already a full disc and cannot make another partition I'm I right?
Your question seems a bit blurry so I'm giving you a general tip here.
If you want to just try the beta you can always use Sun's "Virtualbox".

I have an unnamed window which can not be closed, what can I do?

Hi!
I have a window titled as "unnamed window" which can not be closed. I am unable to get its PID. Neither Xkill utility and Xprop doesn't work. Xprop doesn't report anything when I click on it.

I know it was said in jest (Or I think it was), but even in the worst case, there is no need to reboot - just restart X.
I suspect the name "unnamed window" is not useful, as that is likely the window manager's default when it either cant get the window attributes, or when the window attributes contain a NULL string.
I am also guessing this is a tilingWM - is this awesomewm? I suspect this as I've seen this problem with some programs that crash after having mapped a window but before they have drawn anything to it. This window will remain in the WM's listing of windows, but it will not be at all functional. Often it will not even be "visible" - but if you have a tiling wm, it will take up a tile space.
I've been thinking of writing a little utility to remove such dead-windows.

I am using a Touchsmart 310 getting msg. windows Build 7601 windows 7 is not genuine

Touchsmart

Hello treadwalker,
For some reason your computer is not properly reading the slic table. You will have to change your product key to the one on your COA: (it is likely to be in the battery compartment.)
How to change the product key.
click start
right click computer
select properties
scroll to the bottom of the page and select change product key
You may have to activate by phone
How to activate Windows 7 manually (activate by phone)
1) Click Start, and in the Search box type:   slui.exe 4
2) Next press the 'ENTER' key
3) Select your 'Country' from the list.
4) Choose the 'Phone Activation' option.
5) Stay on the phone (do not select/press any options) and wait for a person to help you with activation.
Additional info:
Additional information:
Computers, which are built by large manufactures that come with Windows Pre-Installed, come with two (2) Product Keys:
A)   OEM SLP: This key comes pre-installed in Windows, when it comes from the Factory. This key is geared to work with the special instructions found only on that Manufacturer's computer hardware. So when Windows was installed using the OEM SLP key (at the factory) Windows 7 looks at the motherboard and sees the special instructions and Self-Activates. (that's why you did not need to Activate your computer after you brought it home)
B)    COA SLP: This is the Product key that you see on the sticker on the side (or bottom,[ or inside the battery compartment]) of your computer. It is a valid product key, but should only be used in limited situations (such as if the OEM SLP key stops self-activating for whatever reason). The key must be activated by Phone. (Note: All manufacturers that use the OEM SLP system are required by contract to include a Certificate of Authenticity (COA) sticker, that has a COA SLP key, on the computer)
Source: Windows Build 7601 not genuine issue.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Windows 7 is not Genuine MIGR-75177

I am getting the dreaded message that your version of Windows 7 is not genuine. I walked through the Lenovo support document and have talked to people at Microsoft and Lenovo for the last 5 hours. They are telling me I need to install a fresh version of Windows and that is the only way to fix the issue! This is BS and I am so pissed it's not even funny. This will be the 3rd time I will have had to do this in as many months since I have owned my machine. Any ideas how to fix this without a complete reinstall?
Thinkpad T510-4313 CTO | Core i7 620M 2.66 GHz | 4 GB RAM | NVIDIA 3100m 512 MB | 15.6 inch LED HD Plus | Windows 7 Ultimate 64 | 1- TB (2-500 GB 7200rpm) Hard Drive |

Ah the Windows Genuine Disadvantage.... where it's the paying customers that get shafted with silly "activation" issues....
I guess "the industry" is largely overdoing this and in the end they will be shooting themselves in the foot. While I would have bought some stuff from MS and Adobe (Visual Studio and Photoshop), their activation schemes completely put me off so I went with open source stuff like Code::Blocks and GIMP. Not because they are "free" (I can afford and I do pay for my software) but because they don't have any stupid activation scheme to deal with. I guess that after getting shafted several times more and more people will be making this choice and after getting familiar with Linux-world software, in the end the transition to Linux the OS would be an obvious and easy thing to do.
Nap.

Im getting a message at startup that my HP windows 7 is not genuine.

IM GETTING A MESSAGE AT STARTUP THAT MY WINDOWS 7 IS NOT GENUINE.

Ah the Windows Genuine Disadvantage.... where it's the paying customers that get shafted with silly "activation" issues....
I guess "the industry" is largely overdoing this and in the end they will be shooting themselves in the foot. While I would have bought some stuff from MS and Adobe (Visual Studio and Photoshop), their activation schemes completely put me off so I went with open source stuff like Code::Blocks and GIMP. Not because they are "free" (I can afford and I do pay for my software) but because they don't have any stupid activation scheme to deal with. I guess that after getting shafted several times more and more people will be making this choice and after getting familiar with Linux-world software, in the end the transition to Linux the OS would be an obvious and easy thing to do.
Nap.

After installing windows 7, will not connect to my router

I installed windows 7, 64-bit on my macbook late 2009 model. After installing, it would not connect to my router. However, it did connect under Mac OS X and it also worked with my roommates laptops, but not my macbook running windows 7. I searched everywhere and could not find a solution. Tried updating drivers (updated to bootcamp for windows 64 bit, 3.1 and then 3.2). Tried setting it up manually. Also, did not work. Does anyone have any solutions for this? It seems a lot of people are also having this issue.

For wired or wireless if you have not already done it,
1) Remove router cable from Modem,
2) Unplug Router power,
3) Unplug Modem power,
4) Wait a few minutes
5) Replug Router power,
6) Replug router cable to Modem
7) Replug Modem power
Also router may in combo with more modern (if wireless?) PC have security (password setup) requirement.
I.E. http://support.dlink.com/emulators/wbr2310/wireless.htm
and a CD that came with it for setup on your computer.

Installing Windows 7 Disc not found

Hello,
When I try to install Windows 7 professional 64 bit I install the CD and click start installation on the boot camp assistant. It returns with "The installer disc could not be found Insert your Windows installer disc and wait a few seconds for the disc to be recognized." I don't know what to do. It doesn't recognize it at all. Any suggesitons would be helpful please!!
Thanks!

What I'm saying is that the DVD I'm using has been used by other students to install Windows 7, with their respective product codes. It's most likely not a problem with the disk. I don't know how he burned it. Is there any other problems that could be causing this?

Bootcamp only saying "install windows 7" , also not working with install disks

i want to install windows 8.1
as u can see bootcamp only says "install windows 7"
i think that i can't do a usb drive install without deleting everything off the only usb stick i have, right?
so i have an install disc instead, like u used to be able to do
should it be working with a disc?
i have a copy of windows 7 as well, so i even tried to install 7 off a disc and this is the message i get when i have either the 8.1 or 7 disc in the drive and i click "continue"
i also figured it would give me the option of how space to allocate before it asked for the install disk

For Macs with built-in Optical drive, you need the Windows installer on a DVD. What year/model is the Mac? (The option to create USB Installer is missing which is also a clue).
The Windows DVD is identified as 'legitimate'. From Boot Camp 5.1: Frequently asked questions - Apple Support
Which versions of Windows work with Boot Camp 5.1?
Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
Also, from BC Info.plist...
<key>Win7OnlyModels</key>
    <array>
        <string>MacBook7,1</string>
        <string>MacBookAir3,2</string>
        <string>MacBookPro5,5</string>
        <string>MacPro2,1</string>
        <string>Macmini4,1</string>
        <string>iMac10,1</string>
    </array>

Problem during install window 8, can not select the drive

During the installation windows 8 on my iMac, I have followed step by step however, when it was reaching to choose the hard drive to install windows and I have formatted the drive as well, but I still not be able to click next to continue. Anyone know what problem here? And how to solve it
Thanks so much

Hello Hollegan,
Thank you for all the information you provided about the Boot Camp installation issue you are experiencing. If you have followed all the steps in page 6 of the Boot Camp Installation and Setup Guide, then I recommend following the troubleshooting steps from page 7:
Boot Camp Installation & Setup Guide
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Thank you for using Apple Support Communities.
Best,
Sheila M.

Bootcamp 4.0.1 Installing Windows 7 disc not found.

When I try to install Windows 7 on my Macbook 13-inch, Late 2009 Running: 10.7.2.
Atttempting to install Windows 7, I go to partition and install, and Bootcamp tells me that no disc is found. Meanwhile the disc is inside.
My friend had purchased an iso and i burned onto a disc with Toast 11.
What can i do to fix this?

I always burn using Nero, creating a bootable CD as opposed to a data CD.

This copy of windows 7 is not genuine

i have a hp 2000 laptop which came with windows per-installed. i have had it for about 2 months now and recently i decided to install multiple linux distros. so i made a logical partition from the D drive and which became the B drive. i installed the distro
with yumi. it failed to work so when i tried to boot back into windows (i believe this is the hd1) it said bootmgr is missing, but when i boot in to the hd0 (system reserved), it boots into windows. To fix this, I deleted the B drive and i installed plop boot
manager with Bootice.(I also made a G drive and installed linux onto the existing primary D partition). i rebooted the computer when i booted into windows, it was asking for an activation key. when i entered the activation key from winkeyfinder, i get 0xC004E003.
Does this have anything to do with the bootmgr missing?

the fact that the windows partition doesn't boot (or that it has no bootmgr), doesn't seem to be a problem. i checked this by making the system reserved partition active and installing Windows NT 6 MBR. (my touchpad is also fully functional now).
*The Activation problem still persists
Please follow the directions below, but be sure to post your results in a brand new thread in the
Windows Genuine Forums.
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words, don't post
your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Note that if you are new to these forums, you may find that you are unable to post due to a restriction on the inclusion of links and pictures.
Simply delete the only lines that contain links - this will allow the remainder of the report to upload (and those lines are not generally
critical to the report anyhow)
Please do not read this sentence. Please ignore the previous sentence.

L505D said my Windows 7 is not genuine, how can I resolve it?

I bought loptop L505D-S5983 just 15 days ago in U.S. with Windows 7 Home Premium installed already with Win7 S/N number at the bottom of my laptop. But yesterday when I reboot the laptop, it prompt that the Win7 is not genuine and asked me to active it, when I click that then the prompt is "contact Toshiba technical support to resolve it...", even I tried to resolve it by myself according to the guide by input the S/N, but no such prompt or area to input the S/N.
I hate this types of problem and it is very strange. it is frst time for me to use Toshiba Laptop even I already uesed many brand, Dell, Sony, IBM, etc. for many years. but I have no idea this time since I am at Mexico city now and no local technical support here. even I made a backup CD but it does not work now. I called technical support center several times but no one would help me.
Would someone give me a hand here?

Hi @twilat,
Welcome to the HP Forums!
I understand that you scanner bulb is to low with your HP Officejet J4680, on Windows 8.1. I am happy to look into this for you!
Some questions for you, if you do not mind:
Are you able to place a sheet of paper on the scanner glass and make a copy of it? Or does the printer provide the same error message?
Is the printer plugged into a surge protector? Or Directly into the wall outlet? Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If you make a copy and lift the scanner lid, do you see the light bulb come on, and the scanner bar moving?
Thank you for posting, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

All of sudden Windows 7 is not genuine error message??

It is genuine I verified it with an online rep. Ran the MGAdiag tool.
Got the following .
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: N/A, hr = 0x80070070
Windows Product Key: N/A, hr=0x80070070
Windows Product Key Hash: N/A, hr=0x80070070
Windows Product ID: 55041-091-8844846-86215
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {EC89FA4A-C2F5-40A8-8D89-DDB29553D3DD}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: B4D0AA8B-604-645_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EC89FA4A-C2F5-40A8-8D89-DDB29553D3DD}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-091-8844846-86215</PID><PIDType>6</PIDType><SID>S-1-5-21-1379822907-1120246070-2792746691</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Studio XPS 7100</Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A04</Version><SMBIOSVersion major="2" minor="6"/><Date>20100722000000.000000+000</Date></BIOS><HWID>B4AE3E07018400F6</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>FX09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
On a computer running Microsoft Windows non-core edition, run 'slui.exe 0x2a 0x80070070' to display the error text.
Error: 0x80070070
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
HealthStatus: 0x0000000000000000
Event Time Stamp: 8:11:2014 23:55
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: NgAAAAEABAABAAIAAAADAAAAAQABAAEAln2My6gTVPkQM9j7VNwge64pDDdiPXLQCiYgNALQ
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name   OEMID Value   OEMTableID Value
APIC           DELL         FX09
FACP           DELL         FX09
SRAT           AMD         FAM_F_10
HPET           DELL         OEMHPET
MCFG           DELL         OEMMCFG
SLIC           DELL         FX09
OSFR           DELL         FX09
OEMB           DELL         FX09
SSDT           A M I        POWERNOW
Also entered some commands
C:\Users\Ruben v>SFC /SCANFILE=C:\windows\system32\slui.exe
Windows Resource Protection did not find any integrity violations.
C:\Users\Ruben v>DIR C:\Windows\slui.* /S
Volume in drive C has no label.
Volume Serial Number is 24E0-8C61
Directory of C:\Windows\System32
11/20/2010 06:25 AM           349,696 slui.exe
               1 File(s)        349,696 bytes
Directory of C:\Windows\System32\en-US
07/13/2009 07:25 PM            11,264 slui.exe.mui
               1 File(s)         11,264 bytes
Directory of C:\Windows\winsxs\amd64_microsoft-windows-s..ty-spp-ux.resources_3
1bf3856ad364e35_6.1.7600.16385_en-us_54dae2e5153375ce
07/13/2009 07:25 PM            11,264 slui.exe.mui
               1 File(s)         11,264 bytes
Directory of C:\Windows\winsxs\amd64_microsoft-windows-security-spp-ux_31bf3856
ad364e35_6.1.7600.16385_none_b7b69062b883381f
07/13/2009 06:39 PM           349,696 slui.exe
               1 File(s)        349,696 bytes
Directory of C:\Windows\winsxs\amd64_microsoft-windows-security-spp-ux_31bf3856
ad364e35_6.1.7601.17514_none_b9e7a42ab571bbb9
11/20/2010 06:25 AM           349,696 slui.exe
               1 File(s)        349,696 bytes
     Total Files Listed:
               5 File(s)      1,071,616 bytes
               0 Dir(s) 17,048,399,872 bytes free
C:\Users\Ruben v>ICACLS C:\Windows\System32\slui.exe
C:\Windows\System32\slui.exe NT SERVICE\TrustedInstaller:(F)
                             BUILTIN\Administrators:(RX)
                             NT AUTHORITY\SYSTEM:(RX)
                             BUILTIN\Users:(RX)
Successfully processed 1 files; Failed processing 0 files

Hi,
I suggest you try this fix to see if your issue is fixed.
Windows 7 displays "Windows is not Genuine" with an error code of 0x80070005
http://support.microsoft.com/kb/2008385
It can also be caused by virus or unexpected changes, you may also try System restore to see what's going on if above steps don't fix your issue.
Kate Li
TechNet Community Support

Local laptop seller installed Windows which is not genuine.

Similar Messages

Maybe you are looking for