Local logical system is not defined when tried to create new maint. trx.

Dear Experts,
I encountered this message "Local logical system is not defined" when I tried to create new maintenance transaction in DWSP (at Maintenance Optimizer of Solution Manager).
This message kept on appeared even though I've created and assigned the logical system at SALE.
Does anyone know what went wrong?
regards,
Abraham

Hi
there are workarround suggested to solve this problem
login to your solman system, go to the table T000 and update the logical system name in the field LOGSYS
this vanish the error message.Please try.
Thanks,
Jansi

Similar Messages

Local logical system is not defined-Maintenance Optimizer Config

Hi,
When I try to configure Maintenance Optimizer in SAP Solution Manager 7, it gives me an error saying "Local logical system is not defined"
But I have created a Logical client using SCC4.
And the other thing is for this created client, does not have any users on this client, If I run,
SQL> select bname, UFKLAG from sapsr3.usr02 where mandt='400';
Answer is "no rows selected"
So I cannot even login in to my new client as well. I tried with SAP/PASS no use. I tried to re-set sap by deleteing it nothing helped.
my login/no_automatic_user_sapstar parameter also have 0 (But this is in Red, I dont know why its like that)
Please help me to rectify both these issues. Issue with Maintenance Optimizer and loggin in to the new client.
Thank you!

First of all, 'Logical System' and 'Logical Client' are two different things.
For Client Problem:
You did create a client in SCC4.
1. did you create a logical system via BD54 and then did you assign that logical system to this newly created client ?
2. did you perform a local client copy to put data into this new client from an old or from a standard client like 000 ?
If you didn't perform above two things, then please do. Only then, you will be able to see some data in this client and will be able to to select statements, And, obviously the SAP*/PASS login (login/no_automatic_user_sapstar should be 0 after reactivation of profile and restart of the instance)
For MOpz issue:
Could you please search in sap marketplace for any particular note specific to MOpz ?

Maintenance Optimizer "local logical system is not defined"

hello, i would like to create a new maintenance transaction to upgrade from SAP ERP 6.0 to SAP ERP 6.0 Enhanced Package 4 i follow the steps in the "maintenance optimizer configuration guide" BUT when i click to create a new maintenance transaction i faced an error told me "local logical system is not defined"!!! so how i can define Local logical system?
thanks in advance
Amr M. Abdelazeez
Mobile: 002 011 40 85 200
Linked In: http://eg.linkedin.com/in/amrabdelazeez/
Alexandria, Egypt

This should be configuration issue, please check the description in the Implementation Guide (tr: SPRO) at following point:
SAP Solution Manager
- Basic Settings
   SAP Solution Manager System
    General Settings
     Maintain Logical Systems
After having maintained the logical systems, the error should not be displayed any longer.

Error: Local logical system is not defined

Hello
Our scenario is File-XI-IDOC , wherein we connect to SAP R/3 Development server for posting IDOCs
Now , we need to connect to SAP R/3 Quality server for posting the same IDOCs.
However, recently, the Quality system database was refreshed with production data completely Hence all the ALE configuration data in Quality tables got erased, due to which we are not able to send IDOCs to Quality
Now, we proceeded as follows :
1. We set up Logical System in Quality
2. We entered the partner profiles too
However when we goto transaction 'BD64' , it gives error as "Local logical system is not defined"
Hence we had to redistribute the profile from the sender system, and IDOC started being posted correctly
But, we need to know, why cannot we execute 'BD64' in Quality itself and also, will this have any impact on our IDOC posting
Further, if Quality is refreshed every now and then, do we need to repeat the above process each time or some other way is available to restore the ALE configuration data automatically
Regards

Hi Naveed,
i made the following settings:
SCC4: new entries created
100     Sending System
200     Receiving System
SM59: new ABAP type 3 connections:
RFC_DEST_LS_100
RFC_DEST_LS_200
- Tab Logon & Security Logon user: current user (bcuser client 001)
Connection test is successful
- Technical Settings: target host: localhost
SALE: new logical systems created
LS_100
LS_200
SCC4:
double click on 100 Sending System   configured with logical system LS_100
double click on 200 Receiving System configured with logical system LS_200
kind regards
Andreas

Local logical system is not defined at BP crwation - How solve it ?

Hello,
when creatin a business partner the following message is showed:
Local logical system is not defined
I add the system by BD54, but the problem is not solved. Any idea ?
Tks a lot,

HI,
Try to attach the logical system to client and see..Use tcode->SCC4 for this.
Regards,
Nagaraj

Post installation error "Local logical system is not defined"

Hello everyone,
I freshly installed the latest SAP NetWeaver 7.01 ABAP Trial from scratch and like to configure ALE.
I followed thew steps of http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/CABFAALEQS/CABFAALEQS.pdf
(ALE Quick Start) but cannot get through the following step on page 12:
From the R/3 Implementation Guide screen in TA SALE
choose Basis
    Application Link Enabling (ALE)
      Modeling and Implementing Business Processes
        Maintain Distribution Model and Distribute Views
Clicking on Maintain Distribution Model or using TA BD87, I immedeately get the following error:
The initialization of the logical system has failed.
With TA BD64 the error: Local logical system is not defined arises. I also looked at
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi,
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1 and
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide describing the same actions
to find an explanation, but without success
I assume, the error does not occur because the trial version does not support it, but
because of other post installation activities that must be done.
I already created two logical systems and assigned them to newly created clients 100 and 200,
but this did not have any impact on BD87 and BD64 as i was hoping.
Does somebody know what to do here?
Thanks in advance and kind regards,
Andreas

Hi Naveed,
i made the following settings:
SCC4: new entries created
100     Sending System
200     Receiving System
SM59: new ABAP type 3 connections:
RFC_DEST_LS_100
RFC_DEST_LS_200
- Tab Logon & Security Logon user: current user (bcuser client 001)
Connection test is successful
- Technical Settings: target host: localhost
SALE: new logical systems created
LS_100
LS_200
SCC4:
double click on 100 Sending System   configured with logical system LS_100
double click on 200 Receiving System configured with logical system LS_200
kind regards
Andreas

Local logical system is not defined

Hello
We are trying to setup a logical system - created or defined the logical system
when we try the BD64 it gives out the error "Local Logical system not defined"
I am using ECC 6 version
IS there any way to bypass and do the setup ?

HI Anil,
Best Methodology for creating a RFC Destination that also includes setting up Logical System is:
Use Transaction -> SALE /b]
1) Define Logical system :
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Logical System -> Define Logical System

2) Assign Client to Logical system:
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Logical System -> Assign Logical System to Client
3) Create RFC Destination: T-CODE (SM59)
Select Idoc Interface / Application Link Enabling (ALE) -> Basic Setting -> Communication -> Create Rfc Connection
Follow steps in sequence. Hope it answers every thing.
Cheers,
*RAJ*
*POINTS IF FOUND HELPFULL*

Get message: local logical system is not defined - in trans. vl01n

Hi experts,
i got this message after i saving data in trans. vl01n.
what should i do to not see this message after i save data in this transaction?
thanks,
dana.

Hi,
Check the logical system definitons in transaction
and can assign the logical system to teh client in SCC4 transaction.
Rgds,
Sandeep

B2 001: Local logical system is not defined

Experts,
I am new to SAP Installation.
I have created Purchase Orders in a newly installed IDES 6.0
It does not appear on the system immediately after saving. I had to go to SM13 to repeat updates before it can appear in ME23N.
I have even gone to SCC4 to edit the client settings to allow changes automatically. I still cannot see an improvement.
Is there anything I am doing wrong?
Do I need to reboot the server?
I posted this in NetWeaver Forum but was told it is the wrong forum.

Garapati,
Read SAP online help at
http://help.sap.com/erp2005_ehp_06/helpdata/EN/aa/b4b13b00ae793be10000000a11402f/frameset.htm
I also suggest that you read the notes cited by expert Jürgen.
Best Regards,
DB49

Error : Logical System is not defined

Hi Experts,
I have installed SAP CRM 7.0 IDES . But when i am trying to exectute Transaction Code /nbp ( Business Partner Creation) system is giving an error 'Logical System is not defined ' and i am not able to execute the transaction.
Kindly explain how to define the logical system.
Regards,
Rohit Tripathi

Hello Rohit,
To solve the problem you should proceed as described in the long text of the error message B2 001 and maintain the logical system for the current client via transaction SCC4.
The reason for this error is that the ALE outbound of business partner is activated. If you don't want the ALE messages to be generated when business partner is changed then you can disable the ALE outbound. To do that, go the maintenance view CRMC_BUT_CALL_FU and disable the following function modules if active:
BUPA_OUTBOUND_REL
BUPA_OUTBOUND_ALE_REL
I hope this could be helpful.
Best regards,
Maggie

Error: local logical system is not definied

Hallo,
when I start transaction bd64, I got following error:
"local logical system is not definied"
Can anybody help me please?
Regards
Stefan

goto SALE transaction and create logical system for your own system(System in which you are working)
Path
Idoc Interface/APllication Link Enabling->Logical Systems->Define Logical systems
Regards,
ravi
Edited by: Ravi Kanth Talagana on Jun 30, 2008 3:57 PM

Logical System is Not Defined in EBP...

Hi SAP GURU's,
Please do Accept My Thanks for Kind Help
Rendered So far ..
My issue is whie working wih Accoutn Assignment is EBP ,I Tried to Maintain Logical System ..But system is throwing Error Massage Logical System is Not Defined in EBP..
Where as it was Defined and Assigned to the Client
in the Configuration ...
The Same thing has been defined in R/3 also ...
what Could be the Reason..? ? ?
Could Any Gentleman through Some light on this
Suitable Points Assigned for the Right Answer
Thansk in Advance
Adarsh

Hi,
Pl define the same logical system names in the Define Back end systems or in the Table
bbp_backend_dest.
Thanks & Regards,
Nagarajan

Logical System is not defined in table SMOF_ERPSH!

Hi,
When i am replicating a material group to SRM system, in SMQ2, the error message appears as 'Logical System is not defined in table SMOF_ERPSH!'.
can any one please let me know why this comes up, i have checked the SMOEAC settings, its fine and the logical system entries are already present in the tabe

Hi,
Can you verify all your settings as per note 720819?
Also under SMOEAC transaction, site attributes for your site type 'CRM' may not have any value. Please define attributes for your SRM RFC destination. Select the correct RFC destination, then click on button 'Get Values'.After doing this, table SMOF_ERPSH should be populated correctly.
Regards,
Nikhil

NotEntitledException when trying to create new potral

hi all ,
when trying to create new portal from admin console in weblogic portal it give me this exception "A NotEntitledException occurred trying to create a Portal definition with a title of testportal".
please any help about this exeption

Me too.

"Recovery partition not found" when trying to creat recovery discs.

I received the following error message when trying to create recovery discs for the first time "recovery partition not found" HP G61 401SA Notebook and it is a couple of years old and has windows 7 as th OS.
I specifically purchased DVD-R discs for the disc creation, which was advised from HP site was the only disc suitable.
Am I doing something incorrect or is there an issue?
Is this why I am unable to also create a back up - are the two things related?

GustoRMC wrote:
Hi Erico
I have managed to create the snip - but unsure how to incorprate into the reply here as copy paste will not work - how can I do that?#
The dvd - r are Verbatim Wide Inkjet I have had success with the Verbatim DVD+R
I did not know you are volunteer helpers - thanks goodness for people like you as trying to contact HP support for help was impossible and seemed like I kept going around in circles. No worries. We are here to help.
One more thing, could you advise on how much space the recovery might be approximately - I will need to make sure a USB has enough memory available. Take another look at the disk management window. The partition sizes are visible in the descriptions. My HP loaner has a large recovery partition at >20GB. That mean I had to use a 32GB usb flash drive Most others are smaller and a 16GB usb flash drive will suffice.
Regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Local logical system is not defined when tried to create new maint. trx.

Similar Messages

Maybe you are looking for