Local move requests stuck with status "queued" at 0% completion
Hello all,
I'm running Exchange server 2010 SP3 with no aditonal RU.
Suddenly we are unable to perform local move requests of mailboxes between databases.
The requests will turn up in the list at Recipient "Configuration\Move Requests" but remain the with status Queued with 0% completion.
It does not matter if the move request is initiated by EMC of the Shell.
I cant find a solution so if someone has some advise that would be great,
I tried the following:
- Restarted the Mailbox Replication service on the CAS server
- Rebooted the Mailbox, CAS and Edge server
- Run a Test-MRSHealth check against the CAS
- Checked all logs but there are no related entries
- Checked my admin account permissions
- Checked if it is related to certain mailboxes and source and destination databases which isn't the case
What else can I do or check?
Kind regards,
Alex
Hi,
You mentioned you checked the event log, but there was no related events.
Have you tried to use the get-moverequest | get-moverequeststatistics cmdlet to check result?
If no, please run this command to see if there is any clues that can be used to narrow down this issue.
Best regards,
Belinda
Belinda Ma
TechNet Community Support
Similar Messages
-
New Local Move Request Stuck at 0% as queued
Dear Sir,
Environment: Company has two sites having multiple DCs, 4 Mailbox Servers (2 on each site) in a single DAG, 4 Hub/CAS servers (2 on each site).
I moved user mailbox from CRP Tier 5 to CRP tier 7, the mailbox size is around 600 MB, it has been showing as queued status for 21 hours. Both database are mounted on a same Mailbox Server.
One thing more I am using Exchange 2010 Sp2 RU1 version
-- Regards Ahsan Kamal | MCITPI have seen issues with BB users who's mailboxes were moved to a different DB lost connectivity to their mailboxes. This was resolved by re-running bes install, which gives a selection for choosing mailbox DB's
however I did find this post
Set-MailboxDatabase -DataMoveReplicationConstraint None
which allows data to be moved on active DB's replicating in a DAG...
hope this helps...
MSP Provider (Network,Hardware,Software,WAN/LAN,Exchange,WiFi,Cisco Controllers/Routers/Switches/AP Autonomous/LWAPP) -
I can find nothing searching online. Trying to move the last user mailbox from one server to another, but it fails with this error. I have checked all mailboxes for the same GUID but can't locate it anywhere. Anybody have some suggestions?
Does anyone know if there is a way to perform a search based on mailbox GUID? Maybe I could find all objects with the same and it could lead me in the right direction.
Hi,
To find the object that belongs to a GUID, you can refer to this blog.
http://blogs.technet.com/b/ehlro/archive/2010/04/22/how-to-find-the-object-that-belongs-to-a-guid.aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
Exchange 2010 Local Move Request with Error (hr=0x80004005, ec=1292)
Trying to migrate from exchange 2003 to 2010.
Ran a Local move request and received the following error.
What can I do?
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:01
Aman Amiri
Failed
Error:
MapiExceptionMailboxInTransit: Unable to open message store. (hr=0x80004005, ec=1292)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=121]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=18]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLogon [254]
Lid: 17082 ROP Error: 0x50C
Lid: 26937
Lid: 21921 StoreEc: 0x50C
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0x50C
Lid: 26297
Lid: 16585 StoreEc: 0x50C
Lid: 32441
Lid: 1706 StoreEc: 0x50C
Lid: 24761
Lid: 20665 StoreEc: 0x50C
Lid: 25785
Lid: 29881 StoreEc: 0x50C
Exchange Management Shell command attempted:
'RWR.local/MyBusiness/Users/SBSUsers/Aman Amiri' | New-MoveRequest -TargetDatabase 'Mailbox Database 1110868248' -BadItemLimit '0'
Elapsed Time: 00:00:01Hi
Is the database on Exchange 2010/2003 mounted and all services started?
Is your account part of Organization Management and able to perform the move requests? -
New Local Move Request Script for Exchange 2010 mailboxes
Hi I would like to have a script that can enable me automatically move mailboxes of certain domains to a new mailbox database. E.g. new local move request to move only 20 mailboxes in mailboxdatabase01 with the domain name: mymove.com, moving
it to mailboxdatabase05. Also, I want to be able to adjust the number of mailboxes to move. Thanks in advance.Wrap this, or something similar, into a script that filters out the users with that domain in a particular DB.
http://technet.microsoft.com/en-us/library/dd876878(v=exchg.141).aspx
And some filtering examples are in here:
http://blogs.technet.com/b/rmilne/archive/2014/03/24/powershell-filtering-examples.aspx
I doubt there is a sample script out there that does exactly what you want, so you'll have to do some coding.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 56945
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 59505 StoreEc: 0x3F2
Lid: 52465 StoreEc: 0x3F2
Lid: 60065
Lid: 33777 StoreEc: 0x3F2
Lid: 59805
Lid: 52209 StoreEc: 0x3F2
Lid: 19778
Lid: 27970 StoreEc: 0x3F2
Lid: 17730
Lid: 25922 StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT -
Exchange 2010 move request failed with MapiExceptionCallFailed
hi
Attempting a local move request of Mailbox but it fails.
plz help
Request 'xxxxxxx' (c307df02-04f8-4428-855e-40cfd89fa67f) failed.error code: -2147467259
MapiExceptionCallFailed: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80004005, ec=1162)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=2082]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=689][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropFXDstCopyConfig [83]
Lid: 27962 ROP: ropTellVersion [134]
Lid: 27962 ROP: ropFXDstPutBufferEx [157]
Lid: 17082 ROP Error: 0x48A
Lid: 31329
Lid: 21921 StoreEc: 0x48A
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 1238 Remote Context Overflow
Lid: 1947 StoreEc: 0x48A
Lid: 1435 StoreEc: 0x48A
Lid: 1947 StoreEc: 0x48A
Lid: 1435 StoreEc: 0x48A
Lid: 1947 StoreEc: 0x48A
Lid: 4559 StoreEc: 0x48A
Lid: 21802
Lid: 19994 StoreEc: 0x48A
Lid: 20202
Lid: 3305 StoreEc: 0x48A
Lid: 32762 dwParam: 0x3FE70003
Lid: 32762 dwParam: 0x361384B0
Lid: 32762 dwParam: 0x36170003
Lid: 32762 dwParam: 0x36DA0102
Lid: 32762 dwParam: 0x36E00102
Lid: 32762 dwParam: 0x3FD60040
Lid: 32762 dwParam: 0x3FE4000B
Lid: 32762 dwParam: 0x67590102
Lid: 32762 dwParam: 0x675A0102
Lid: 32762 dwParam: 0x30080040
Lid: 32762 dwParam: 0x675C0102
Lid: 32762 dwParam: 0x65E30102
Lid: 32762 dwParam: 0x67510003
Lid: 32762 dwParam: 0x672D0003
Lid: 32762 dwParam: 0x673384B0
Lid: 32762 dwParam: 0x673284B0
Lid: 26346
Lid: 4073 StoreEc: 0x48A
Lid: 28570 StoreEc: 0x48A
Lid: 29738
Lid: 3401 StoreEc: 0x48A
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x48A
Lid: 22630
Context:
Operation: IMapiFxProxy.ProcessRequest
OpCode: TransferBuffer
DataLength: 2362
Operation: IMapiFxProxy.ProcessRequest
OperationSide: Target
Primary(c307df02-04f8-4428-855e-40cfd89fa67f)
OpCode: TransferBuffer
DataLength: 2362
Any ideas? any help much appreciatedWhat version of Exchange 2010? SP2, RU #? I saw this support article form MS for 2003 --> 2010
http://support.microsoft.com/kb/2579051. Not sure if it is applicable. It could be you need to go to RU4 for SP2 Exchange 2010. Do not install RU5 as there were issues.
I've also run into several support articles about ACLs on the mailbox or fiolders:
http://runebelune.blogspot.com/2010/11/mapiexceptionnosupport.html [remember that Exchange 2010 you need to use ExFolders and not PFDAVAdmin]
http://social.technet.microsoft.com/Forums/hi-IN/exchangesvrdeploylegacy/thread/73a385d5-ea2f-47b9-87f0-c481b1f29b35
Let me know if I can provide any additional help.
JAUCG -
Service Request template with status resolved
Hi all,
There is a way to create a Service Request template with the status "resolved"? We would like to use this kind of template in a location when we don't care about the issues, but we need to know their number. So we just have to open a new
SR, apply that template and close it automatically.
Thank you,
EugenHi,
If no Activities related to your Service Request it will completed automatically, If actitivities related than you must create a workflow to complete the activities first, then your SR will be completed.
Antoine AL Ibry -
N8, sending MMS stuck with status "deferred" (trie...
I was accidentally trying to send a MMS into email address, and now it's stuck in sending it with status "Deferred". I've tried restarting the phone and setting messages to expire within 1 hour, I tried removing SIM and starting phone without it. I can't simply delete those from the list. Nothing seems to help.
Please help, it also blocks new SMS's from showing in status unless I go into inbox and I think battery is draining faster.Its so simple that Nokia might have thought not worth putting in the manual... lol..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box... -
Hi
I have a user where I removed the failed moverequest. If I take a look at the user at the on-premise EMC he still has the little Move Request ICON. I can not move him again now.
I tried to create a migration batch from Office 365, but that was "stalledduetomailboxlock"
Then I stopped the batch, but now that is in "Stopping"
How can it go this bad - and what can I do to clear everything?
BR
SteenRun Get-MoveRequest in Online PowerShell. Run the same cmdlet in the Exchange Management Shell. Make sure that there is no move request for the user in either side. If there is, delete it.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
Urgent:Idoc stuck with status 03 in TRFC
My Idoc is in status 03, but it is not reached to destination.
I guess It is stuck in Rfc layer or in some QUEUE.
There was quality system refresh last week here with Production system.
Pelase suggest what seetings need to be changed and where.
in SM58 it give the following error
'RFC address XXXXXXX doesn't exist'
(where XXXXXXX i m not mentioning here for Client security reasons)
is there any program to clear these layers?
Thanks a ton in advance and the answer will be adequately awarded.hi,
whnevr ur idoc is in status 03 just run the transaction BD75.
the status will be converted to 12 and datawill be passed.
reward points if hlpful. -
Messages stuck with status "WAITING"
Hi Everyone,
We have implemented PI interface a year ago with JDBC sender (ORACLE) and RFC receiver (SAP) to transfer the goods movements from legacy to SAP and give back the current stock after the goods movement is posted back to ORACLE system.
The interface has been working fine for over an year now but suddenly since 15days we are experiencing the issue of delays in message transmission where-in in SXMB_MONI we see a time difference of 60-90mins between start message start time and end time...
Nothing has been changed from development/design perspective and am unable to understand the reasons for this delay.
Also for the above scenario the message status in MESSAGE MONITORING shows waiting status and i have cross verified for any errors and could not find any errors in given time.
also MDT Screen shot for your reference
I am struggling to figure out the reasons and this is causing stock mismatch between Oracle system and SAP and has become show stopper.
Please guide me in identifying the root cause and fixing this...
Thanking you all in anticipation of help...
Lakshmihi Claudia,
I have cross verified both and as you can see there are no errors
a
and finally the XML
couldn't figure out why this delay happening... One thing after an hour or so... the things get cleared as one in executing state finishes leading to others to finish.. but by then they are getting accumulated
Appreciate any guidance to figure out the root cause...
Thanks in advance
lakshmi -
PO stuck with status Awaiting Approval
We have the following issue: for example a PO with 3 version (change 1, change 2 and active 3). when you display the PO in the portal you see the change 2 in status ... "Awaiting approval" but when you check the Approval table, it shows ... Approval process already finished, when you see in bbp_pd .. you see that the workflow items for change 1 and active 3, have status COMPLETED, but the change 2 have status ERROR.
If someone knows how to fix this ... the help would be appreciated.
Thanks
KarinaHi Cardac,
do you mean to say change 2 is marked as closed , the woritem id for chnage 2 is shown as completed but status is still shown as "awaiting approval" and higher version 4 is not created ?
if that is the case , please check the set release method is complete for workitem id (change 2) , check in sm58 there is nothing in error related to workflow.
try executing the FM BBP_PD_PO_STATUS_CHANGE_WF. trying creating another event "SAVED" through SWUE.
cheers
Iftekhar Alam -
SM13 Update Request Failed entries with status "Enqueques deleted"
Hi Experts,
I viewed transaction SM13 and there are entries whereas the updated request is failed and the status is "Enqueque deleted". Unlike with other updated request failed with status "Error", error message is provided. However for those with "Enqueque deleted" there's NO error. Do you have any idea what went wrong having such status? Thanks in advance!
Best Regards,
KurttHi Royit,
Thank you very much for your response. are there any means of tracing who deleted/released it? Thanks in advance!
Best Regards,
Kurtt -
Exchange 2013 shell mailbox move requests showing up on 2010 hub server
We're in the process of migrating from exchange 2010 to 2013. All servers are patched and up to date. We have two 2010 CASs (one for external OWA use only) and a mailbox cluster. Our exchange 2013 setup is almost a mirror with the exceptions of how the exchange
server roles have changed.
Any new-moverequest commands entered from the either of our exchange 2013 CAS servers fail to show up in the EAC/recipients/migration page.
If the local move request is done in the EAC the batch(es) show up just fine.
The more perplexing part is: while I was going through a 2010 hub (looking for a different issue) I noticed ALL the batches/mailbox moves that weren't showing up in the 2013 EAC were listed in the 2010 move request section.
I can't get any info on the moves in the 2010 console (because they're 2013 jobs) but i can get statistics and such from a 2013 shell.
any ideas?Are you running ex2013SP1 CU6? Can you try to update n check?
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.
Maybe you are looking for
-
Accept language in Http Header of Aqualogic portlet.
Hi, we have developed one web page using ASP.Net and hosted in the Aqualogic portlet server, when ever we access that page from different location/browser, we are getting "en-us" as accept language in the Http header variable of Request object, but i
-
Create form based on existing row : advice from specialists
hello, i've coded a "create form" based on a row selected by the user. this create form displays the same information as the selected row (except for the primary key which is a sequence trigger-calculated) the user can then modify any field and then
-
I have Desktop 4.1.4 installed.And I see in the calendar week view in the week 28.12.2008 to 04.01.2009 the week number "0" and in the following week the number "1" and so on.I think that's wrong because in the calendars the week from 28.12.2008 to 0
-
Apple TV (144): what does the 144 mean?
When using AirPlay, that is connecting to the TV screen via the toobar menu, the contextual menu offer this option: Connect to AirPlay Display: Apple TV (144) Is the (144) normal? Does it stand for the software revision or is it an error?
-
iphone 3 dropped in salt water. Appears non-functional - won't turn on. Nothing on SIM card -- had that checked. Is there ANY way to retrieve the photos and contacts. There is no backup of them.