Local Patch proxy not showing all patches

Ive noticed that sometimes the my local patch proxy doesnt pick up all the patches.
Theres a bunch of patches that just showed up today on the sun server. But if I point a machine at my local patch proxy, they don't show up in an smpatch analyze (or in the um display).
Point the machine back to the sun server and they show up again.
Possibly it just a lag problem and they will show up in th local proxy tomorrow.

I take it when you say local patch proxy you are referring to the Sun Update Connect Proxy, rather than the Local Patch Server (LPS).
Have a look at the thread below and let us know whether the problem you have is the same:
http://forum.sun.com/thread.jspa?threadID=25740&messageID=92719
If so the solution is shown here:
First, stop the proxy:
patchsvr stop
See if the crypto services are running:
$ svcs svc:/system/cryptosvc
You'll need to restart them if they are disabled:
$ svcadm enable svc:/system/cryptosvc
Now, you can disable the problematic component:
$ cryptoadm disable metaslot
And restart the proxy:
$ patchsvr start
Solution taken from:
http://forum.sun.com/thread.jspa?threadID=25780&start=10&tstart=0

Similar Messages

  • Ical not showing all day events in lion osx

    ical does not show all day events

    Hi,
    I noticed that the issue only happens to specific user with specific computer. Please do the following checking to narrow down the issue:
    1. please update the Outlook client with the latest patches and service packs.
    2. disable using Exchange cached mode and check whether the issue happens in Online mode in this computer.
    3. Start
    Outlook in safe mode to have a try.
    4. Perform a clean boot
    in your Windows for the new machine.
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Winnie Liang
    TechNet Community Support

  • APS metrics page not showing all CPU's

    I have installed BO 4.0 SP02 patch 11. I have seperated the CR
    Scheduling service as a seperate job server form AJS.
    My CR jobs are running fine however, I have 8 CPU on that machine but
    in matrics page of Job server, it is showing
    only 4 CPU. Why it is not showing all the 8 CPU?
    does it mean that its limited to work for 4 CPU only.

    Hi Atul,
    Would it be possible that you have in fact 4 CPUs which are all dual cores?
    So it's like you have 8 CPUs but in reality it's only 4 CPUs?
    Regards,
    Philippe

  • Outlook Client not showing all emails

    Hi,
    We have signed up for emails on domains.live.com for the domain name kamtress.com 
    We setup Outlook clients in our office using IMAP.
    But the outlook client does not show all emails and also shows lots of copies of sent emails while we would have sent only one.
    Could you please help us out with this issue as to how this can be rectified?
    We use Outlook 2013 on Windows 7.
    Thank you.

    Hi,
    First of all, please make sure your Outlook is fully patched.
    Then, please log on your web mail and check if you can see all your emails. If so, please open your Outlook, go to File > Info > Account Settings > Account Settings > Highlight your Imap account and click
    Change > in the Change Account wizard, check how you set the 'Mail to keep offline' slider. Change it to
    All and then check if you can see all your emails in Outlook now.
    If problem persists, please try to create a new mail profile in Control Panel and set up your IMAP account in the new profile to check if it helps. To configure an email account via IMAP, please refer:
    http://support.microsoft.com/kb/829918/en-us
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support

  • Photoshop CS4 Is Not Showing all Formats/Extensions when saving. [was: Please Help]

    My Adobe Photoshop Cs4 Is Not Showing all Formats/Extensions.
    when i edit a picture and wants to save in .png or .bmp or in any other format ...
    there is no .png In the Save As List, There are only Some Extenstions in that list like Jpeg-Psd-Tif etc...
    I Made The Picture in RGB mode..
    And I have Png.8bi Present In my AdobePhotoshop/Plugins/File Formats
    But It Is Still Not Showing Can you guys help

    Thanks For The Reply ... Let Me Answer your questions
    Os = Windows ( windows xp )
    Bits = 8 bits / Channel
    I didn't Understand your this question
    => If On Windows is it the same in both the 32 and 64 bit versions of Photoshop cs4?
    System Info :-
    Adobe Photoshop Version: 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
    Operating System: Windows XP 32-bit
    Version: 5.1 Service Pack 3
    System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2
    Physical processor count: 1
    Processor speed: 1394 MHz
    Video Card: Intel(R) 82845G Graphics Controller
    Video Mode: 1152 x 864 x 4294967296 colors
    Video Card Driver: ialmrnt5.dll
    Driver Version: 6.13.01.3264
    Built-in memory: 2046 MB
    Free memory: 1497 MB
    Memory available to Photoshop: 1586 MB
    Memory used by Photoshop: 70 %
    Image cache levels: 4
    Serial number: 92628791954238016438
    Application folder: D:\CS4\Photoshop CS4\
    Temporary file path: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Startup, 39.1G, 32.0G free
    Primary Plug-ins folder: D:\CS4\Photoshop CS4\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       ACE.dll   ACE 2008/08/27-18:10:41   53.355610   53.355610
       AdobeLinguistic.dll   Adobe Linguisitc Library   4.0.0  
       AdobeLM.dll   AdobeLM   3.0.11.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
       AdobeLM_libFNP.dll   FLEXnet Publisher (32 bit)   11.5.0.1 build 57427  
       AdobeOwl.dll   Adobe Owl 2008/08/14-18:38:42   2.0.70   53.354161
       AdobeOwlCanvas.dll   Adobe Owl Canvas   2.0.70   53.354161
       AdobePDFL.dll   PDFL 2008/08/20-20:15:08   53.204060   53.204060
       AdobeUpdater.dll   Adobe Updater Library   6.0.0.1452 (BuildVersion: 52.338651; BuildDate: Wed Apr 16 2008 19:28:20)   52.338651
       AdobeXMP.dll   Adobe XMP Core   4.2.2   53.352624
       AdobeXMPFiles.dll   Adobe XMP Files   4.2.2   53.352624
       AdobeXMPScript.dll   Adobe XMP Script   4.2.2   53.352624
       adobe_caps.dll   Adobe CAPS   2,0,99,0   2.135373
       AFlamingo.dll   AFlamingo 2008/07/09-11:28:44   53.350580   53.350580
       AGM.dll   AGM 2008/08/27-18:10:41   53.355610   53.355610
       ahclient.dll    AdobeHelp Dynamic Link Library   1, 3, 12, 0  
       aif_core.dll   AIF   1.0   53.352475
       aif_ogl.dll   AIF   1.0   53.352475
       amtlib.dll   AMTLib   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
       amtservices.dll   AMTServices   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
       ARE.dll   ARE 2008/08/27-18:10:41   53.355610   53.355610
       asneu.dll    AsnEndUser Dynamic Link Library   1, 6, 0, 8  
       ATL80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       authplay.dll        
       AXE8SharedExpat.dll   AXE8SharedExpat 2008/06/11-20:19:53   NFR 53.348206   53.348206
       AXEDOMCore.dll   AXEDOMCore 2008/06/11-20:19:53   53.348206   53.348206
       Bib.dll   BIB 2008/08/27-18:10:41   53.355610   53.355610
       BIBUtils.dll   BIBUtils 2008/08/27-18:10:41   53.355610   53.355610
       cg.dll   NVIDIA Cg Runtime   2.0.0015  
       cgGL.dll   NVIDIA Cg Runtime   2.0.0015  
       CoolType.dll   CoolType 2008/08/27-18:10:41   53.355610   53.355610
       data_flow.dll   AIF   1.0   53.352475
       ExtendScript.dll   ExtendScript 2008/07/17-13:28:24   53.351316   53.351316
       FileInfo.dll   Adobe XMP FileInfo   4.2.2   53.352624
       FNP_Act_Installer.dll   FLEXnet Publisher (32 bit)   11.6.0.1 build 60959  
       icucnv36.dll   International Components for Unicode 2008/03/20-16:33:10    Build gtlib_1.1 CL#7223  
       icudt36.dll   International Components for Unicode 2008/03/20-16:33:10    Build gtlib_1.1 CL#7223  
       image_flow.dll   AIF   1.0   53.352475
       image_runtime.dll   AIF   1.0   53.352475
       JP2KLib.dll   JP2KLib 2008/06/11-20:19:53   53.100857   53.100857
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       mfc80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfc80CHS.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfc80CHT.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfc80DEU.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfc80ENU.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfc80ESP.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfc80FRA.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfc80ITA.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfc80JPN.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfc80KOR.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfc80u.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       mfcm80u.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       MPS.dll   MPS 2008/07/07-10:33:04   53.350311   53.350311
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS4   CS4  
       Plugin.dll   Adobe Photoshop CS4   CS4  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   1.0.0.73  
       PSArt.dll   Adobe Photoshop CS4   CS4  
       PSViews.dll   Adobe Photoshop CS4   CS4  
       registration.dll   Registration   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
       SCCore.dll   ScCore 2008/07/17-13:28:24   53.351316   53.351316
       shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300  
       VersionCue.dll   Adobe VersionCue   4.0.0.0client1  
       WRServices.dll   WRServices Friday May 30 2008 7:18:42   Build 0.7713   0.7713
    Installed plug-ins:
       ADM 3.11x01
       Accented Edges 11.0
       Angled Strokes 11.0
       Bas Relief 11.0
       Chalk & Charcoal 11.0
       Charcoal 11.0
       Chrome 11.0
       Colored Pencil 11.0
       Conté Crayon 11.0
       Craquelure 11.0
       Crosshatch 11.0
       Cutout 11.0
       Dark Strokes 11.0
       Diffuse Glow 11.0
       Dry Brush 11.0
       Embed Watermark 3.0
       Film Grain 11.0
       Filter Gallery 11.0
       Fresco 11.0
       Glass 11.0
       Glowing Edges 11.0
       Grain 11.0
       Graphic Pen 11.0
       HDRMergeUI 11.0
       Halftone Pattern 11.0
       Ink Outlines 11.0
       Lens Blur 11.0
       Lens Correction 11.0
       Liquify 11.0
       Mosaic Tiles 11.0
       Neon Glow 11.0
       Note Paper 11.0
       Ocean Ripple 11.0
       Paint Daubs 11.0
       Palette Knife 11.0
       Patchwork 11.0
       Photocopy 11.0
       Plaster 11.0
       Plastic Wrap 11.0
       Poster Edges 11.0
       Read Watermark 3.0
       Reticulation 11.0
       Rough Pastels 11.0
       Save for Web & Devices 11.0
       ScriptingSupport 11.0
       Smudge Stick 11.0
       Spatter 11.0
       Sponge 11.0
       Sprayed Strokes 11.0
       Stained Glass 11.0
       Stamp 11.0
       Sumi-e 11.0
       SuperPNG 2.0
       Texturizer 11.0
       Torn Edges 11.0
       Underpainting 11.0
       Vanishing Point 11.0
       Variations 11.0 (11.0x001)
       Water Paper 11.0
       Watercolor 11.0
    Plug-ins that failed to load: NONE
    Flash: 0
    Installed TWAIN devices: NONE

  • Local Folders does not access all existing subfolders after hard drive restore

    I had to restore my hard drive using Time Machine. Now Local Folders does not show my complete list of subfolders. I checked the hard drive location,
    /Users/carol/Library/Thunderbird/Profiles/u7n9368b.default/Mail/Local Folders
    and the folders all are there. I have reinstalled TB without a change. How do I get TB to read those folders? Needless to say, I have a LOT of really important stuff stored in there that I need to be able to access. The data is in there. I was able to open it in text, but it's pretty hard to read that way.

    I was mistaken. NOT all the folders are still on the hard drive in my Library. Unfortunately, my Library was hidden in backups and I cannot find it to restore from an older backup. If anyone has a hack for showing a user Library in a Time Machine backup that was not visible when the backup was made, let me know!

  • Text Entry Box not showing all text

    I am creating a simple exercise where I would like the user to copy text from the course, paste it into word, and report back what the word count is.  I thought perhaps the Text Entry Box would be the best way to go, since if you click on the existing (default) text, you can copy it.  However after I place the paragraph of text in the box, and resize in the editor so that all the text shows, it does not show all the text when playing back, either previewd or published.  It only shows the last few words of the last line at the top of the box.
    Is there something I am missing?  Or, is there an easier/better way to do what I need?
    Thanks

    Hi all
    If this is Captivate 4, there may not be any need for a widget to do this. I'm guessing you haven't tried enabling the Scroll Bar for the Text Entry Box (TEB)?
    When I just plop a TEB on a slide, I get this in edit view:
    During playback it looks like this:
    But if I edit the TEB properties and enable the Show Scrollbar option:
    I get this in the output:
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • SelectOneChoice not showing all values from database

    Hi!
    I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
    P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
    Code:
    <af:selectOneChoice id="selAction" value="#{row.idCmd}"
    unselectedLabel="&lt;Selecione>">
    <af:forEach var="alertTypeNode"
    items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
    <af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
    label="#{alertTypeNode.dataProvider.nmCmd}"
    id="si1"/>
    </af:forEach>
    </af:selectOneChoice>

    In your page binding check the rangesize setting for the executable you use - set it to -1.

  • Transaction MD04 does not show all open sales/orders deliverys

    Hi,
    Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
    Can anyone tell me the reason for this?
    Regards,
    Brijesh

    Hi
    Run SDRQCR21 report in Transaction SE38 for that material it will  resolve your issue.
    Please confirm
    Amit

  • Analysis does not show all rows returned by SQL

    Hi.
    OBIEE 11.1.1.7.0
    I have a strange problem.  I have a simple table that should return customer number and sales.  The report will show all of the sales, but it does not show all the customer numbers.  The SQL that OBIEE creates does return all of the customer numbers.  When I remove the sales and just include the customer number, the report only shows a couple of the customer numbers (it should show several hundred).
    I guess what I'm looking for is any advice for how to debug this.  I have spent about 3 days on this problem, so I have tried to look at it from every angle (data, RPD, report).
    Any suggestions are appreciated.
    Thank you.

    Thank you for your reply.
    New development.  The issue has to do with a descriptor ID column.  The customer number column is a varchar field and I set the descriptor ID column to the column_ID field.  When I remove the descriptor ID setting, I received all custom numbers.

  • I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
    Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

  • List view not showing all podcasts

    Guys, I have the annoying problem that podcast management by itunes and the podcast app are F'ed up.
    Not too lobg ago I experienced my ipad greying out most podcasts that were downloaded and on my ipad, for no reason at all. it took me 2 days fiddling with settings and ended up having to set every sync to "on" and set donwloading to "all" and "keep all podcasts"
    Now I'm experiencing the problem that the "list" view in podcast app, is not showing all podcasts, but the "thumbnail" view is (as far as I can tell...). Why is this and how can I fix it to make sure both views show everything?
    I'm running iOS 7.0.6 and iTunes 11.1.5

    Hey there sporry,
    It sounds like your Podcasts app is not showing your library correctly in the List view but Thumbnail looks ok. I recommend the troubleshooting in the article named:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Restart the app
    Close the app and open it again.
    Restart your device
    Turn the device off and on.
    Update your device software and your apps
    Update your device to the latest version of iOS.
    Update your apps:
    Open the App Store and tap Updates.
    If updates are available, tap Update All.
    If asked, enter your Apple ID password. The updates will download and install.
    You might need a Wi-Fi connection to update some apps.
    Install another app from the App Store
    If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
    Remember to use the same Apple ID that you used to download the app that you're having issues with.
    Reinstall the app
    Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
    Delete the app.
    Press the Home button.
    Go to the App Store and download the app again.
    Wait for the app to download, then open it from the Home screen.
    If the download stops, you can resume it.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • In iphone 4 mobile me calander not showing all events in list view

    i have iphone 4 Mobile me calendar not showing all events in list view where as showing all events in month/day view. why so & how to resolve

    It started about a week ago. The "From" drop-dow is now missing in Mac Mail. It should appear beneath the subject line. I was working with MobileMe Chat support for about 3 hours. They cannot solve the problem and have now escalated it to the "Senior Advisor Team."

  • Account Dimension not showing all members in the cube in Analysis Services

    Hi,        
             In SAP - BPC 5.1 after processing account dimension all the members are created under account dimension in analysis services but the same cannot be found in the data cube. Hence the reports generated through SAP - BPC is not showing all the members.
             The issue looks very strange as we can see the members getting created but the same is not getting populated in the cubes. I am not able to visualize what exacly the issue is? Is it with the application or with the analysis services?
    Thanks
    Sharath

    Your sixth sense is correct, there is definitely support in MSAS and BPC 5.1 for multiple hierarchies in the account dimension.
    I'm also referring to parentH1 and parentH2, but perhaps we're still speaking of different things.
    In the past, I faced a very similar problem as you, and the root cause was because I had one member, let's call it FancyParent, which, in H1, had children Child1 and Child2.
    But in H2 it had children Child1, Child2 and Child3. I forget now if that was how I wanted the setup to be, or if it was a mistake on my part, but either way, MSAS doesn't allow this. The admin consol didn't complain when processing the dimension -- this was in Outlooksoft 5.0; perhaps validation has improved now.
    But the cube was completely unworkable. Certain things were calculating correctly, but everything in the account dimension in the area around FancyParent (above and below it, in both hierarchies) was quite unpredictable.
    By disabling first one, and then the other, of the two hierarchies, and disabling blocks of accounts, I was eventually able to pinpoint the problem. But it took days to figure out what was the problem. (The account dimension had 2500 members and 4 hierarchies, and it was not a pretty sight.)
    A parent must have the same definition of children in all hierarchies. It can't, as another example, have children in H1, and be a base member in H2. Each member can have different parents in the two hierarchies, but must always have the same children in both.
    To work around this problem, I had to create two separate accounts NetIncomeH1 and NetIncomeH2 (and PretaxIncomeH1, PretaxIncomH2, etc. all the way down to the point where they branched off), to get the two separate aggregations of the P&L in the two hierarchies. Once I did that, it made sense to me why, but I also swore off on frivolous extra hierarchies ever again.

  • BI publisher report is not showing all the data

    Hi All,
    I have created a report using BI Publisher in R12. The report is not showing all the records.
    I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
    what might be the issue.please give me some idea to resolve this issue.
    Thanks in advance.
    Regards,
    P.Kalidoss

    Hi Arun,
    In the following code: public SelectItem[] getAllPrinters() {
    if (allPrinters == null) {           // allPrinters is not defined. what type of object it is
    PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
    allPrinters = new SelectItem[printers.length];
    for (int i = 0; i < printers.length; i++) {
    SelectItem printer =
    new SelectItem(printers.getName(), printers[i].getName());
    allPrinters[i] = printer;
    return allPrinters;;;
    Variable allPrinters is not defined. what type of object it is?
    And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
    value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
    id="soc1"
    autoSubmit="true">
    <f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
    </af:selectOneChoice>.
    Thanks.

Maybe you are looking for